Carbon content in steel is __________ percent. (A) 0.1-2 (B) 4-6 (C) 2-4 (D) 0.001-0.01

Carbon content in steel is __________ percent.
(A) 0.1-2
(B) 4-6
(C) 2-4
(D) 0.001-0.01
by

1 Answer

Answer :

(A) 0.1-2
by

Related questions

Maximum change in the hardness of martensite occurs in the carbon content range of __________ percent in steel. (A) 0.01 to 0.10 (B) 0.2 to 0.4 (C) 0.5 to 0.7 (D) 0.8 to 1.0

Description : Maximum change in the hardness of martensite occurs in the carbon content range of __________ percent in steel. (A) 0.01 to 0.10 (B) 0.2 to 0.4 (C) 0.5 to 0.7 (D) 0.8 to 1.0

Last Answer : (B) 0.2 to 0.4

Solid content in most of the domestic sewage is about __________ percent. (A) 0.001 (B) 0.1 (C) 5 (D) 10

Description : Solid content in most of the domestic sewage is about __________ percent. (A) 0.001 (B) 0.1 (C) 5 (D) 10

Last Answer : (B) 0.1

Rotary vacuum pumps can reduce the absolute pressure to as low as __________ mm Hg. (A) 1 (B) 0.1 (C) 0.01 (D) 0.001

Description : Rotary vacuum pumps can reduce the absolute pressure to as low as __________ mm Hg. (A) 1 (B) 0.1 (C) 0.01 (D) 0.001

Last Answer : (C) 0.01

Maximum permissible residual chlorine in treated water should be __________ mg/litre. (A) 0.001 to 0.01 (B) 0.2 to 0.3 (C) 2 to 3 (D) 5 to 10

Description : Maximum permissible residual chlorine in treated water should be __________ mg/litre. (A) 0.001 to 0.01 (B) 0.2 to 0.3 (C) 2 to 3 (D) 5 to 10

Last Answer : (B) 0.2 to 0.3

The difference in one unit of Rockwell hardness number corresponds to a difference in the depth of indentation of __________ mm. (A) 0.001 (B) 0.01 (C) 0.002 (D) 0.02

Description : The difference in one unit of Rockwell hardness number corresponds to a difference in the depth of indentation of __________ mm. (A) 0.001 (B) 0.01 (C) 0.002 (D) 0.02

Last Answer : Option C

The minimum carbon content in steel should be __________ percent for it to respond to a hardening treatment. (A) 0.2 (B) 0.4 (C) 0.6 (D) 0.8

Description : The minimum carbon content in steel should be __________ percent for it to respond to a hardening treatment. (A) 0.2 (B) 0.4 (C) 0.6 (D) 0.8

Last Answer : Option A

Carbon content in plain carbon steel is __________ percent. (A) 0.1 to 0.15 (B) 0.35 to 0.45 (C) 0.65 to 0.80 (D) 0.85 to 1.2

Description : Carbon content in plain carbon steel is __________ percent. (A) 0.1 to 0.15 (B) 0.35 to 0.45 (C) 0.65 to 0.80 (D) 0.85 to 1.2

Last Answer : (B) 0.35 to 0.45

Steel will respond to hardening by heat treatment processes, only when the minimum carbon content in it is __________ percent. (A) 0.02 (B) 0.2 (C) 0.35 (D) 0.5

Description : Steel will respond to hardening by heat treatment processes, only when the minimum carbon content in it is __________ percent. (A) 0.02 (B) 0.2 (C) 0.35 (D) 0.5

Last Answer : (B) 0.2

When a constant discharge 2.91 litres/sec. was obtained in a pumping test, the draw downs in the test wells at 3 m and 6.184 m were 2.6 m and 0.3 m respectively. If over-all depth of the pumping well was 16 m, the permeability of the soil, is (A) 0.0005 cm/sec (B) 0.001 cm/sec (C) 0.002 cm/sec (D) 0.01 cm/sec

Description : When a constant discharge 2.91 litres/sec. was obtained in a pumping test, the draw downs in the test wells at 3 m and 6.184 m were 2.6 m and 0.3 m respectively. If over-all depth of the pumping well was 16 m, the ... (A) 0.0005 cm/sec (B) 0.001 cm/sec (C) 0.002 cm/sec (D) 0.01 cm/sec

Last Answer : Answer: Option B

Very low pressure is expressed in microns (μ), which is equal to__________ mm of Hg column (absolute) at 0°C.(A) 0.0001(B) 0.001(C) 0.01(D) 0.1

Description : Very low pressure is expressed in microns (μ), which is equal to__________ mm of Hg column (absolute) at 0°C. (A) 0.0001 (B) 0.001 (C) 0.01 (D) 0.1

Last Answer : (B) 0.001

In a number sequence what is 0.001 0.01 0.1 1?

Description : In a number sequence what is 0.001 0.01 0.1 1?

Last Answer : Each successive number is ten times the one before it.

What is the Next number in the sequence 0.001 0.01 0.1 1?

Description : What is the Next number in the sequence 0.001 0.01 0.1 1?

Last Answer : 10

Threshold limit value of copper in the atmospheric air is - (1) 0.001 mg/m3 (2) 0.01 mg/m3 (3) 1.0 mg/m3 (4) 5.0 mg/m3

Description : Threshold limit value of copper in the atmospheric air is - (1) 0.001 mg/m3 (2) 0.01 mg/m3 (3) 1.0 mg/m3 (4) 5.0 mg/m3

Last Answer : (3) 1.0 mg/m3 Explanation: Inspirable copper dust takes a predominantly fibrous effect. The ALV of copper aerosol in the workplace atmosphere is 0.5 mg/m3, while the threshold limit value (TLV) is 1.0 mg/m3.

A micron is equal to – (1) 0.1 ram (2) 0.01 mm (3) 0.001 mm (4) 0.0001 mm

Description : A micron is equal to – (1) 0.1 ram (2) 0.01 mm (3) 0.001 mm (4) 0.0001 mm

Last Answer : (3) 0.001 mm Explanation: 1 micron = 0.001 millimeters. A micrometre (micron) is one-millionth of a metre (or one-thousandth of a millimetre, 0.001 mm). Its unit symbol in the ... is a common unit of measurement for wavelengths of infrared radiation as well as sizes of cells and bacteria.

Period of oscillation of 3 cm microwaves in seconds is (1) 1 x 10¹⁰ (2) 1 x 10⁻¹⁰ (3) 0.01 (4) 0.001

Description : Period of oscillation of 3 cm microwaves in seconds is (1) 1 x 10¹⁰ (2) 1 x 10⁻¹⁰ (3) 0.01 (4) 0.001

Last Answer : (2) 1 x 10⁻¹⁰ Explanation: The period of oscillation of 3 cm microwaves is 1 x 10^-10 (Physics, Volume 1, by Halliday). The period of oscillation is the smallest interval of time in which a system undergoing oscillation returns to the state it was in at the beginning of the oscillation.

A conductor with a cross-sectional area of one circular mil would have a diameter of _____________. A. 0.1 inches B. 0.01 inches C. 0.001 inches D. 0.0001 inches

Description : A conductor with a cross-sectional area of one circular mil would have a diameter of _____________. A. 0.1 inches B. 0.01 inches C. 0.001 inches D. 0.0001 inches

Last Answer : Answer: C

What is the typical separation between the two conductors in a parallel wire line? A. 0.001 to 0.01 m B. 200 to 500 mm C. 0.635 to 15.24 cm D. 2.5 to 5 in.

Description : What is the typical separation between the two conductors in a parallel wire line? A. 0.001 to 0.01 m B. 200 to 500 mm C. 0.635 to 15.24 cm D. 2.5 to 5 in.

Last Answer : C. 0.635 to 15.24 cm

Angstrom (Å) is equal to (a) 0.01 mm (b) 0.001 mm (c) 0.0001 mm (d) 0.00001 mm

Description : Angstrom (Å) is equal to (a) 0.01 mm (b) 0.001 mm (c) 0.0001 mm (d) 0.00001 mm

Last Answer : (b) 0.001 mm

The void ratio of a soil sample decreases from 1.50 to 1.25 when the pressure is increased from 25 tonnes/m2 to 50 tonnes/m2 , the coefficient of compressibility is (A) 0.01 (B) 0.02 (C) 0.05 (D) 0.001

Description : The void ratio of a soil sample decreases from 1.50 to 1.25 when the pressure is increased from 25 tonnes/m2 to 50 tonnes/m2 , the coefficient of compressibility is (A) 0.01 (B) 0.02 (C) 0.05 (D) 0.001

Last Answer : (A) 0.01

The specific gravity of water is taken as (A) 0.001 (B) 0.01 (C) 0.1 (D) 1

Description : The specific gravity of water is taken as (A) 0.001 (B) 0.01 (C) 0.1 (D) 1

Last Answer : Answer: Option D

Pick up the incorrect statement from the following: (A) Dimensions are measured to the nearest 0.01 m (B) Areas are measured to the nearest 0.01 sq.m (C) Cubic contents are measured to the nearest 0.1 cum (D) Weights are measured to the nearest 0.001 tonnes

Description : Pick up the incorrect statement from the following: (A) Dimensions are measured to the nearest 0.01 m (B) Areas are measured to the nearest 0.01 sq.m (C) Cubic contents are measured to the nearest 0.1 cum (D) Weights are measured to the nearest 0.001 tonnes

Last Answer : (D) Weights are measured to the nearest 0.001 tonnes

The time of closing the cycle, in modern circuit breakers is (a) 0.003 sec (b) 0.001 sec (c) 0.01 sec (d) 0.10 sec (e) none of the above

Description : The time of closing the cycle, in modern circuit breakers is (a) 0.003 sec (b) 0.001 sec (c) 0.01 sec (d) 0.10 sec (e) none of the above

Last Answer : (a) 0.003 sec

The mechanical splice attenuation loss is _____ dB or less ∙ a. 0.1 ∙ b. 0.01 ∙ c. 0.001 ∙ d. 1

Description : The mechanical splice attenuation loss is _____ dB or less ∙ a. 0.1 ∙ b. 0.01 ∙ c. 0.001 ∙ d. 1

Last Answer : a. 0.1

A Huffman code: A = 1, B = 000, C = 001, D = 01 ,P(A) = 0.4, P(B) = 0.1, P(C) = 0.2, P(D) = 0.3 The average number of bits per letter is A. 8.0 bit B. 2.0 bit C. 1.9 bit D. 2.1 bit

Description : A Huffman code: A = 1, B = 000, C = 001, D = 01 ,P(A) = 0.4, P(B) = 0.1, P(C) = 0.2, P(D) = 0.3 The average number of bits per letter is A. 8.0 bit B. 2.0 bit C. 1.9 bit D. 2.1 bit

Last Answer : C. 1.9 bit

A Huffman code: A = 1, B = 000, C = 001, D = 01 ,P(A) = 0.4, P(B) = 0.1, P(C) = 0.2, P(D) = 0.3 The average number of bits per letter is a. 8.0 bit b. 2.0 bit c. 1.9 bit d. 2.1 bit

Description : A Huffman code: A = 1, B = 000, C = 001, D = 01 ,P(A) = 0.4, P(B) = 0.1, P(C) = 0.2, P(D) = 0.3 The average number of bits per letter is a. 8.0 bit b. 2.0 bit c. 1.9 bit d. 2.1 bit

Last Answer : c. 1.9 bit

A micron is equal to (1) 0.1 mm (2) 0.01 mm (3) 0.001 mm(4) 0.0001 mm

Description : A micron is equal to (1) 0.1 mm (2) 0.01 mm (3) 0.001 mm(4) 0.0001 mm

Last Answer : 0.001 mm

In a transistor Colpitts oscillator, C1 = 0.001 µF, C2 = 0.01 µF and L = 5 µH. The frequency of oscillation in

Description : In a transistor Colpitts oscillator, C1 = 0.001 µF, C2 = 0.01 µF and L = 5 µH. The frequency of oscillation in MHz will be (a) 2.37 MHz (b) 10.00 MHz (c) 11.54 MHz (d) 9.09 MHz 

Last Answer : c

Maximum permissible sulphur content in steel is __________ percent. (A) 0.015 (B) 0.055 (C) 0.505 (D) 0.805

Description : Maximum permissible sulphur content in steel is __________ percent. (A) 0.015 (B) 0.055 (C) 0.505 (D) 0.805

Last Answer : (B) 0.055

Maximum permissible sulphur content in steel is __________ percent. (A) 0.015 (B) 0.055 (C) 0.505

Description : Maximum permissible sulphur content in steel is __________ percent. (A) 0.015 (B) 0.055 (C) 0.505

Last Answer : Option A

Maximum permissible sulphur content in steel is __________ percent. (A) 0.015 (B) 0.055 (C) 0.505 (D) 0.805

Description : Maximum permissible sulphur content in steel is __________ percent. (A) 0.015 (B) 0.055 (C) 0.505 (D) 0.805

Last Answer : Option A

High carbon steel contains more than __________ percent carbon. (A) 0.5 (B) 2.2 (C) 2.5 (D) 2.8

Description : High carbon steel contains more than __________ percent carbon. (A) 0.5 (B) 2.2 (C) 2.5 (D) 2.8

Last Answer : (A) 0.5

With increasing carbon percent in steel beyond 0.8%, its ultimate tensile strength (UTS) and __________ is not affected. (A) Impact strength (B) Percent elongation (C) Hardness (D) Both 'b' & 'c'

Description : With increasing carbon percent in steel beyond 0.8%, its ultimate tensile strength (UTS) and __________ is not affected. (A) Impact strength (B) Percent elongation (C) Hardness (D) Both 'b' & 'c'

Last Answer : (A) Impact strength

Hard steel contains – (1) 2 to 5 per cent carbon (2) 0.5 to 1.5 per cent carbon (3) 0.1 to 0.4 per cent carbon (4) 0.01 to 0.04 per cent carbon

Description : Hard steel contains – (1) 2 to 5 per cent carbon (2) 0.5 to 1.5 per cent carbon (3) 0.1 to 0.4 per cent carbon (4) 0.01 to 0.04 per cent carbon

Last Answer : (2) 0.5 to 1.5 per cent carbon Explanation: The term hardened steel is often used for a medium or high carbon steel that has been given the heat treatments of quenching followed by ... In contrast, the same steel composition in annealed state will be softer as required for forming and machining.

Hard steel contains (1) 2 to 5 per cent carbon (2) 0.5 to 1.5 per cent carbon (3) 0.1 to 0.4 per cent carbon (4) 0.01 to 0.04 per cent carbon

Description : Hard steel contains (1) 2 to 5 per cent carbon (2) 0.5 to 1.5 per cent carbon (3) 0.1 to 0.4 per cent carbon (4) 0.01 to 0.04 per cent carbon

Last Answer :  0.5 to 1.5 per cent carbon

An alkaline solution is used to reduce the concentration of carbon dioxide in a stream from 10% to 0.1% by absorption with irreversible chemical reaction. The overall number of transfer units based on gas phase is: (A) 9.21 (B) 4.605 (C) 100 (D) 0.001

Description : An alkaline solution is used to reduce the concentration of carbon dioxide in a stream from 10% to 0.1% by absorption with irreversible chemical reaction. The overall number of transfer units based on gas phase is: (A) 9.21 (B) 4.605 (C) 100 (D) 0.001

Last Answer : (B) 4.605

Maximum carbon content in cast iron is __________ percent. (A) 3.8 (B) 5.2 (C) 4.8 (D) 4.3

Description : Maximum carbon content in cast iron is __________ percent. (A) 3.8 (B) 5.2 (C) 4.8 (D) 4.3

Last Answer : (D) 4.3

Carbon Content by weight in air dried wood may be about __________ percent. (A) 10 (B) 25 (C) 50 (D) 80

Description : Carbon Content by weight in air dried wood may be about __________ percent. (A) 10 (B) 25 (C) 50 (D) 80

Last Answer : (C) 50

Carbon content of pitch (residue of coal tar distillation) is around __________ percent. (A) 70 (B) 55(C) 80 (D) 94

Description : Carbon content of pitch (residue of coal tar distillation) is around __________ percent. (A) 70 (B) 55 (C) 80 (D) 94

Last Answer : (D) 94

A student measured the diameter of a small steel ball using a screw gauge of least count 0.001 cm. The main scale reading is 5 mm and zero of circular

Description : A student measured the diameter of a small steel ball using a screw gauge of least count 0.001 cm. The main scale reading is 5 mm and zero of circular

Last Answer : A student measured the diameter of a small steel ball using a screw gauge of least count 0.001 cm. The main scale ... (C) 0.053 cm (D) 0.529 cm

TLV of mercury in potable (drinking) water is about __________ ppm. (A) 0.001 (B) 0.1 (C) 1 (D) 5

Description : TLV of mercury in potable (drinking) water is about __________ ppm. (A) 0.001 (B) 0.1 (C) 1 (D) 5

Last Answer : (A) 0.001

The 'transition temperature' for ductile to brittle behaviour of steel increases with increase in the __________ content in steel. (A) Carbon (B) Manganese (C) Both 'a' nor 'b' (D) Neither 'a' nor 'b'

Description : The 'transition temperature' for ductile to brittle behaviour of steel increases with increase in the __________ content in steel. (A) Carbon (B) Manganese (C) Both 'a' nor 'b' (D) Neither 'a' nor 'b'

Last Answer : (A) Carbon

Dead mild steel, which contains 0.10 to 0.15 percent carbon is used for making (A) Shafts (B) Flanges (C) Gears (D) Shear blades

Description : Dead mild steel, which contains 0.10 to 0.15 percent carbon is used for making (A) Shafts (B) Flanges (C) Gears (D) Shear blades

Last Answer : (B) Flanges

Colburn analogy is applicable for the value of Prandtl number from (A) 0.001 to 1 (B) 0.6 to 120 (C) 0.5 to 5 (D) 120 to 400

Description : Colburn analogy is applicable for the value of Prandtl number from (A) 0.001 to 1 (B) 0.6 to 120 (C) 0.5 to 5 (D) 120 to 400

Last Answer : (B) 0.6 to 120

Ash content in the coke produced from a coking coal having 20% ash may be around __________ percent. (A) 6 (B) 12 (C) 18 (D) 24

Description : Ash content in the coke produced from a coking coal having 20% ash may be around __________ percent. (A) 6 (B) 12 (C) 18 (D) 24

Last Answer : (D) 24

The Al2O3 content of cryolite in Hall-Heroult cell is maintained between __________ percent. (A) 2-5 (B) 18-20 (C) 12-15 (D) 6-12

Description : The Al2O3 content of cryolite in Hall-Heroult cell is maintained between __________ percent. (A) 2-5 (B) 18-20 (C) 12-15 (D) 6-12

Last Answer : (A) 2-5

Liquid diffusivity is of the order of __________ cm2 /second. (A) 0.01 (B) 0.1 (C) 10 -5 to 10 -6 (D) > 1

Description : Liquid diffusivity is of the order of __________ cm2 /second. (A) 0.01 (B) 0.1 (C) 10 -5 to 10 -6 (D) > 1

Last Answer : (C) 10 -5 to 10

Salt content in sea water is about __________ percent. (A) 0.5 (B) 1 (C) 3.5 (D) 9.05

Description : Salt content in sea water is about __________ percent. (A) 0.5 (B) 1 (C) 3.5 (D) 9.05

Last Answer : (C) 3.5

Maximum carbon content in any variety of steel can be upto 1.3%. Steel containing 0.4% Carbon is not used for making (A) Nuts (B) Bolts (C) Chisels

Description : Maximum carbon content in any variety of steel can be upto 1.3%. Steel containing 0.4% Carbon is not used for making (A) Nuts (B) Bolts (C) Chisels

Last Answer : (C) Chisels

Which of the following are made out of the carbon steel having carbon content of 0.9 to 1%? (A) Small punches, broaches reamers and springs (B) Cutlery, screws, rivets and files (C) Mandrels, twist drills, small lathe tools and razors (D) Forgings like can shaft, structural steel plate, threading dies and drawing dies

Description : Which of the following are made out of the carbon steel having carbon content of 0.9 to 1%? (A) Small punches, broaches reamers and springs (B) Cutlery, screws, rivets and files (C) ... lathe tools and razors (D) Forgings like can shaft, structural steel plate, threading dies and drawing dies

Last Answer : (A) Small punches, broaches reamers and springs

The percentage of carbon in cost iron is (1) 0.01 to 0.25 (2) 0.5 to 1.5 (3) 6 to 3 (4) 3 to 5

Description : The percentage of carbon in cost iron is (1) 0.01 to 0.25 (2) 0.5 to 1.5 (3) 6 to 3 (4) 3 to 5

Last Answer : (4) 3 to 5 Explanation: Cast Iron is a hard, brittle, nonmalleable iron-carbon alloy, cast into shape. It contains 2 to 4.5 percent carbon, 0.5 to 3 percent silicon, and lesser amounts of sulfur, manganese, and phosphorus.