The steel mainly contains how much percentage of carbon a) 0.70 to 0.80% b) to 0.3 % c) 0.5 to 0.1 %

The steel mainly contains how much percentage of carbon a) 0.70 to 0.80% b) to 0.3 % c) 0.5 to 0.1 %
by

1 Answer

Answer :

0.70 to 0.80%
by

Related questions

The percentage of carbon in mild steel is (A) 0.08 to 0.3 % (B) 0.5 to 1.4 % (D) 2.35 % (D) 0.5 %

Description : The percentage of carbon in mild steel is (A) 0.08 to 0.3 % (B) 0.5 to 1.4 % (D) 2.35 % (D) 0.5 %

Last Answer : (A) 0.08 to 0.3 %

The moisture content of sludge is reduced from 90% to 80% in a sludge digestion tank. The percentage decrease in the volume of sludge, is A. 25 % B. 50 % C. 10 % D. 5 %

Description : The moisture content of sludge is reduced from 90% to 80% in a sludge digestion tank. The percentage decrease in the volume of sludge, is A. 25 % B. 50 % C. 10 % D. 5 %

Last Answer : ANS: B

Steel contains carbon approximately (A) 1.50% to 5.6% (B) 0.05% to 1.75% (C) 0.25 % (D) None to these

Description : Steel contains carbon approximately (A) 1.50% to 5.6% (B) 0.05% to 1.75% (C) 0.25 % (D) None to these

Last Answer : Answer: Option B

Percentage of pozzolanic material containing clay upto 80% used for the manufacture of pozzolana cement, is (A) 30 % (B) 40 % (C) 50 % (D) 60 %

Description : Percentage of pozzolanic material containing clay upto 80% used for the manufacture of pozzolana cement, is (A) 30 % (B) 40 % (C) 50 % (D) 60 %

Last Answer : (A) 30 %

For design of sewers, percentage of sewage discharge is assumed A. 65 to 70% B. 70 to 75% C. 75 to 80% D. 85%

Description : For design of sewers, percentage of sewage discharge is assumed A. 65 to 70% B. 70 to 75% C. 75 to 80% D. 85%

Last Answer : ANS: C

Seed germination percentage of rough lemon is: a. 50-60% b. 60-70% c. 70-80% d. 80-90%

Description : Seed germination percentage of rough lemon is: a. 50-60% b. 60-70% c. 70-80% d. 80-90%

Last Answer : 60-70%

The sum of the percentage of tricalcium silicate and dicalcium silicate for Portland cement varies from. (a) 50 to 60% (b) 60 to 70% (c) 70 to 80% (d) 80 to 90%

Description : The sum of the percentage of tricalcium silicate and dicalcium silicate for Portland cement varies from. (a) 50 to 60% (b) 60 to 70% (c) 70 to 80% (d) 80 to 90%

Last Answer : (c) 70 to 80%

Minimum percentage of longitudinal steel in a column should not be less than [ A ] 0.60% [ B ] 0.80% [ C ] 1.00% [ D ] 1.20%

Description : Minimum percentage of longitudinal steel in a column should not be less than [ A ] 0.60% [ B ] 0.80% [ C ] 1.00% [ D ] 1.20%

Last Answer : [ B ] 0.80%

The cow’s milk contains how much amount of water in terms of percentage? A. 60% B. 65% C. 72% D. 80% (Answer)

Description : The cow’s milk contains how much amount of water in terms of percentage? A. 60% B. 65% C. 72% D. 80% (Answer)

Last Answer : D. 80% (Answer)

The percentage of alumina in a good brick earth lies between (A) 5 to 10 % (B) 20 to 30 % (C) 50 to 60 % (D) 70 to 80 %

Description : The percentage of alumina in a good brick earth lies between (A) 5 to 10 % (B) 20 to 30 % (C) 50 to 60 % (D) 70 to 80 %

Last Answer : Answer: Option B

Percentage of silica in a good brick earth lies between (A) 5 to 10 % (B) 20 to 30 % (C) 50 to 60 % (D) 70 to 80

Description : Percentage of silica in a good brick earth lies between (A) 5 to 10 % (B) 20 to 30 % (C) 50 to 60 % (D) 70 to 80

Last Answer : Answer: Option C

Percentage of water in buffalo milk is:- a. 65-67 % b. 70-75 % c. 80-85 % d. 87-90 %

Description : Percentage of water in buffalo milk is:- a. 65-67 % b. 70-75 % c. 80-85 % d. 87-90 %

Last Answer : d. 87-90 %

An Aided school has only three classes which contain 70, 36 and 40students respectively. The pass percentage of these classes are30,25 and 20 respectively. The pass percentage of the aided school is A) 23 % B) 15% C) 26 % D) 30%

Description : An Aided school has only three classes which contain 70, 36 and 40students respectively. The pass percentage of these classes are30,25 and 20 respectively. The pass percentage of the aided school is A) 23 % B) 15% C) 26 % D) 30% 

Last Answer : C) Total number of students passed in class1 = 30/100 *70 = 21 Total number of students passed in class 2= 25/100 *36 = 9 Total number of students passed in class 3= 20/100 *40 = 8 Total number of students passed in the school = 38 Thus, pass percentage of the school = 38 /146*100 = 26 %

If the permissible compressive and tensile stresses in a singly reinforced beam are 50 kg/cm2 and 1400 kg/cm2 respectively and the modular ratio is 18, the percentage area At of the steel required for an economic section, is (A) 0.496 % (B) 0.596 % (C) 0.696 % (D) 0.796 %

Description : If the permissible compressive and tensile stresses in a singly reinforced beam are 50 kg/cm2 and 1400 kg/cm2 respectively and the modular ratio is 18, the percentage area At of the steel required for an economic section, is (A) 0.496 % (B) 0.596 % (C) 0.696 % (D) 0.796 %

Last Answer : Answer: Option C

A final amplifier of a radio transmitter draws 250 mA of plate current when the plate supply voltage is 1400 volts. If the plate circuit efficiency is 80% and the transmitter is connected to an antenna having a feed impedance of 70 ohms, what is the antenna current at the feed-point? A. 4.0 A B. 2.2 A C. 1.25 A D. 2.0 A

Description : A final amplifier of a radio transmitter draws 250 mA of plate current when the plate supply voltage is 1400 volts. If the plate circuit efficiency is 80% and the transmitter is connected to an antenna having a feed impedance of 70 ohms, ... at the feed-point? A. 4.0 A B. 2.2 A C. 1.25 A D. 2.0 A

Last Answer : D. 2.0 A

is the limit percentage for grain loss in India. a) 1.5 % b) 15% c) 5 % c) 7.26 %

Description : is the limit percentage for grain loss in India. a) 1.5 % b) 15% c) 5 % c) 7.26 %

Last Answer : 5 %

Wrought iron contains carbon upto (A) 0.25 % (B) 1.0 % (C) 1.5 % (D) 2 %

Description : Wrought iron contains carbon upto (A) 0.25 % (B) 1.0 % (C) 1.5 % (D) 2 %

Last Answer : Answer: Option A

Cast iron contains carbon approximately (A) 1.5% to 5.5% (B) 0.05% to 1.75% (C) 0.250 % (D) None to these

Description : Cast iron contains carbon approximately (A) 1.5% to 5.5% (B) 0.05% to 1.75% (C) 0.250 % (D) None to these

Last Answer : Answer: Option A

Statement -1Wrought iron in more malleable and ducitlle than steel. Statement -2: It contains slightly less percentage of carbon.

Description : Statement -1Wrought iron in more malleable and ducitlle than steel. Statement -2: It contains slightly less percentage of carbon.

Last Answer : Statement -1Wrought iron in more malleable and ducitlle than steel. Statement -2: It contains slightly less percentage of carbon.

Which one of the following contains maximum percentage of carbon? (1) Cast iron (2) Stainless steel (3) Wrought iron (4) High speed steel

Description : Which one of the following contains maximum percentage of carbon? (1) Cast iron (2) Stainless steel (3) Wrought iron (4) High speed steel

Last Answer : (1) Cast iron Explanation: Cast Iron is a hard, brittle, nonmalleable iron-carbon alloy, cast into shape, containing 2 to 4.5 percent carbon. Steels contain less than 2% and usually less than 1% carbon, ... percent carbon. Wrought iron is an iron alloy with very low carbon (0.04 to 0.08%) content.

Which one contains the least percentage of carbon?(A) Wrought iron (B) High speed steel (C) Cast iron (D) Pig iron

Description : Which one contains the least percentage of carbon? (A) Wrought iron (B) High speed steel (C) Cast iron (D) Pig iron

Last Answer : (A) Wrought iron

Which of the following contains maximum percentage of carbon? (A) Boiler plate steel (B) Rail steel (C) Saws for cutting steel (D) Railway spring steel

Description : Which of the following contains maximum percentage of carbon? (A) Boiler plate steel (B) Rail steel (C) Saws for cutting steel (D) Railway spring steel

Last Answer : (C) Saws for cutting steel

Which one of the following contains maximum percentage of carbon ? (1) Cast iron (2) Stainless steel (3) Wrought iron (4) High speed steel

Description : Which one of the following contains maximum percentage of carbon ? (1) Cast iron (2) Stainless steel (3) Wrought iron (4) High speed steel

Last Answer : Cast iron

High carbon steel having carbon content about (A) 0.25 % (B) 0.25 – 0.50 % (C) 0.50 – 1.5 % (D) 2.5 - 4.5 %

Description : High carbon steel having carbon content about (A) 0.25 % (B) 0.25 – 0.50 % (C) 0.50 – 1.5 % (D) 2.5 - 4.5 %

Last Answer : (C) 0.50 – 1.5 %

Medium Carbon steel was carbon content about (A) 0.25 % (B) 0.25 – 0.50 % (C) 0.50 – 1.5 % (D) 2.5 – 4.5 %

Description : Medium Carbon steel was carbon content about (A) 0.25 % (B) 0.25 – 0.50 % (C) 0.50 – 1.5 % (D) 2.5 – 4.5 %

Last Answer : (B) 0.25 – 0.50 %

Air contains volume of carbon dioxide approximately _____. A. 3 % B. 33% C. 0.3 % D. 0.03%

Description : Air contains volume of carbon dioxide approximately _____. A. 3 % B. 33% C. 0.3 % D. 0.03%

Last Answer : ANSWER: D

Air contains volume of carbon dioxide approximately _____. A. 3 % B. 33% C. 0.3 % 20 D. 0.03%

Description : Air contains volume of carbon dioxide approximately _____. A. 3 % B. 33% C. 0.3 % 20 D. 0.03%

Last Answer : ANSWER: D

Air contains volume of carbon dioxide approximately _____. A. 3 % B. 33% C. 0.3 % D. 0.03%

Description : Air contains volume of carbon dioxide approximately _____. A. 3 % B. 33% C. 0.3 % D. 0.03%

Last Answer : ANSWER: D

70] Silicon steel used in laminations mainly reduces A. Hysteresis loss B. Eddy current losses C. Copper loss D. All of the above

Description : 70] Silicon steel used in laminations mainly reduces A. Hysteresis loss B. Eddy current losses C. Copper loss D. All of the above

Last Answer : A. Hysteresis loss

The cow's milk contains how much amount of water in terms of percentage? A. 60 B. 70 C. 75 D. 80

Description : The cow's milk contains how much amount of water in terms of percentage? A. 60 B. 70 C. 75 D. 80

Last Answer : ANSWER: D

Resorce requirement in project becomes constant while the project is in its _____ progress stage. (A) 40 to 55% (B) 55 to 70% (C) 70 to 80% (D) 80 to 95%

Description : Resorce requirement in project becomes constant while the project is in its _____ progress stage. (A) 40 to 55% (B) 55 to 70% (C) 70 to 80% (D) 80 to 95%

Last Answer : (D) 80 to 95%

Resorce requirement in project becomes constant while the project is in its progress stage. (A) 40 to 55% (B) 55 to 70% (C) 70 to 80% (D) 80 to 95%

Description : Resorce requirement in project becomes constant while the  project is in its progress stage. (A) 40 to 55% (B) 55 to 70% (C) 70 to 80% (D) 80 to 95%

Last Answer : (D) 80 to 95%

Resource requirement in project becomes constant while the project is in its progress stage. A. 40 to 55% B. 55 to 70% C. 70 to 80% D. 80 to 95%

Description : Resource requirement in project becomes constant while the project is in its progress stage. A. 40 to 55% B. 55 to 70% C. 70 to 80% D. 80 to 95%

Last Answer : D. 80 to 95%

Most cases of osteomyelitis are caused by which of the following microorganisms? a) Staphylococcus Staphylococcus aureus causes 70-80% of bone infections.

Description : Most cases of osteomyelitis are caused by which of the following microorganisms? a) Staphylococcus Staphylococcus aureus causes 70-80% of bone infections. b) Proteus species While Proteus species are ... coli is frequently found in osteomyelitis, it does not cause the majority of bone infections

Last Answer : a) Staphylococcus Staphylococcus aureus causes 70-80% of bone infections.

Standard disc Plough consists of steel disc of _ diameter a) 20 to 40 cm. c) 60 to 90 cm b) 30 to 60 cm. d) 70 to 100 cm

Description : Standard disc Plough consists of steel disc of _ diameter a) 20 to 40 cm. c) 60 to 90 cm b) 30 to 60 cm. d) 70 to 100 cm

Last Answer :  60 to 90 cm

Standerd disc plough consist of steel dics of… to……. CM diameter. a. 60,90 c) 60,80 b. 70,100. d) 70,90

Description : Standerd disc plough consist of steel dics of… to……. CM diameter. a. 60,90 c) 60,80 b. 70,100. d) 70,90

Last Answer : 60,90

to manganese besides other minor elements. a) 0.10 to 0.50% b) 0.20 to 0.60% c) 0.40 to 0.80% d) 0.50 to 0.80%

Description : to manganese besides other minor elements. a) 0.10 to 0.50% b) 0.20 to 0.60% c) 0.40 to 0.80% d) 0.50 to 0.80%

Last Answer : 0.50 to 0.80%

In a 100 quadrat study of 1 sqm each Cyperus rotundus was found in 80 quadrats with overall of 5640 individuals. The frequency (%), abun dance and density (m2) would be a). 70.5, 80.0 and 56.4 b). 56.4, 70.5 and 80.0 c). 80.0, 70.5 and 56.4 d). 80.0, 56.4 and 70.5

Description : In a 100 quadrat study of 1 sqm each Cyperus rotundus was found in 80 quadrats with overall of 5640 individuals. The frequency (%), abun dance and density (m2) would be a). 70.5, 80.0 and 56.4 b). 56.4, 70.5 and 80.0 c). 80.0, 70.5 and 56.4 d). 80.0, 56.4 and 70.5

Last Answer : c). 80.0, 70.5 and 56.4

. In order to be called steel, an alloy should have iron percentage greater than (A) 80 (B) 70 (C) 90 (D) 50

Description : . In order to be called steel, an alloy should have iron percentage greater than (A) 80 (B) 70 (C) 90 (D) 50

Last Answer : (A) 80

Pick out the wrong statement. (A) High concentration of oxygen in flue gas means high stack loss (B) Gaseous fuels require the least % excess air for complete combustion (C) The ratio of fixed carbon to volatile matter percentage in coal is called its 'fuel ratio' (D) Calorific value of natural gas is more than that of LPG

Description : Pick out the wrong statement. (A) High concentration of oxygen in flue gas means high stack loss (B) Gaseous fuels require the least % excess air for complete combustion (C) The ratio of fixed carbon to ... coal is called its 'fuel ratio' (D) Calorific value of natural gas is more than that of LPG

Last Answer : (D) Calorific value of natural gas is more than that of LPG

Straight silicon steel (containing Si from 0.5 to 5%) because of their low hysteresis loss and high magnetic permeability are used for electrical appliances. Which of the following electrical appliances made of silicon steel contains maximum percentage of silicon (about 4%)? (A) Armature of small motors/generators (B) Generators and small motors (C) Induction motors (D) High frequency transformers

Description : Straight silicon steel (containing Si from 0.5 to 5%) because of their low hysteresis loss and high magnetic permeability are used for electrical appliances. Which of the following electrical ... /generators (B) Generators and small motors (C) Induction motors (D) High frequency transformers

Last Answer : (D) High frequency transformers

Natural draft cooling tower are mainly used in a) Steel Industry b) Alumina industry c) Fertilizer industry d) Power station

Description : Natural draft cooling tower are mainly used in a) Steel Industry b) Alumina industry c) Fertilizer industry d) Power station

Last Answer : Power station

Natural draft cooling towers are mainly used in the _____. • Steel industry • Fertilizer industry • Alumina industry • Power stations

Description : Natural draft cooling towers are mainly used in the _____. • Steel industry • Fertilizer industry • Alumina industry • Power stations

Last Answer : Power stations

Maintain 850 OC for 1 hour (soaking time).  Cool the material to 60 OC in 4 hours. a) Calculate the efficiency of the furnace, if the specific heat of steel is 0.12 kcal/kgOC and fuel oil consumption per batch is 1400 litres.  GCV of fuel oil - 10200 kcal/kg,  Cost of fuel oil - Rs. 46,000/kL,  Sp. gr. of fuel oil - 0.92. b) Due to high cost of oil, the plant management decides to convert to a lower operating cost LPG fired furnace lined on the inside with ceramic fibre insulation and with an operating efficiency of 80%, for same requirement. The investment towards installation of the new furnace is Rs. 50 lakhs. Calculate the Return on Investment, if the plant operates two batches per day and 250 days in a year.  Cost of LPG - Rs. 75/kg,  GCV of LPG - 12500 kcal/kg.

Description : In a heat treatment shop, steel components are heat-treated in batches of 80 Tons. The  heat treatment cycle is as follows;  Increase temperature from 30 OC to 850 OC in 3 hours.  ... efficiency of 80%, for same requirement. The investment towards installation of  the new furnace is Rs. 50

Last Answer : Quantity of steel treated per batch - 80 Tons a. Efficiency of Furnace: Useful heat supplied to steel - 80000 x 0.12 x (850 - 30)   = 7872000 kcal/batch .1 mark Total heat ... = Rs. 64400/batch Efficiency of new LPG furnace - 80% Heat supplied in new LPG furnace - 7872000/0.8

The minimum percentage of tension steel is mainly based on the [ A ] Total depth [ B ] Effective depth [ C ] Both (a) and (b) [ D ] None of the above.

Description : The minimum percentage of tension steel is mainly based on the [ A ] Total depth [ B ] Effective depth [ C ] Both (a) and (b) [ D ] None of the above.

Last Answer : [ A ] Total depth

The Percentage of steel in T-beam mainly based on [ A ] Flange width [ B ] Rib width [ C ] Flange depth [ D ] None of the above.

Description : The Percentage of steel in T-beam mainly based on [ A ] Flange width [ B ] Rib width [ C ] Flange depth [ D ] None of the above.

Last Answer : [ B ] Rib width

How much percentage of water lies within the body cells. a. 20% b. 40% c. 60% d. 80%

Description : How much percentage of water lies within the body cells. a. 20% b. 40% c. 60% d. 80%

Last Answer : 40%

gas is the mixture mainly consisting of carbon monoxide and hydrogen in specially designed apparatus. a) CNG b) LPG c) Biomass d) None of the above

Description : gas is the mixture mainly consisting of carbon monoxide and hydrogen in specially designed apparatus. a) CNG b) LPG c) Biomass d) None of the above

Last Answer : Biomass

What refers to the heating of the earth’s atmosphere not caused by direct sunlight but by infrared light radiated by the surface and absorbed mainly by atmospheric carbon dioxide?  A. Greenhouse effect  B. Global warming  C. Thermal rise effect  D. Ozone effect

Description : What refers to the heating of the earth’s atmosphere not caused by direct sunlight but by infrared light radiated by the surface and absorbed mainly by atmospheric carbon dioxide?  A. Greenhouse effect  B. Global warming  C. Thermal rise effect  D. Ozone effect

Last Answer : Greenhouse effect

Percentage of carbon in steel ranges from – (1) 0.1 to 1.5 (2) 1.5 to 3.0 (3) 3.0 to 4.0 (4) 4.0 to 6.0

Description : Percentage of carbon in steel ranges from – (1) 0.1 to 1.5 (2) 1.5 to 3.0 (3) 3.0 to 4.0 (4) 4.0 to 6.0

Last Answer : (1) 0.1 to 1.5 Explanation: Steel is an alloy made by combining iron and other elements, the most common of these being carbon. When carbon is used, its content in the steel is ... weight, depending on the grade. Other alloying elements sometimes used are manganese, chromium, vanadium and tungsten.