Purchased cost of equipments for a chemical process plant ranges from __________ percent of the fixed capital investment. (A) 10 to 20 (B) 20 to 40 (C) 45 to 60 (D) 65 to 75

Purchased cost of equipments for a chemical process plant ranges from __________ percent of the fixed capital investment.
(A) 10 to 20
(B) 20 to 40
(C) 45 to 60
(D) 65 to 75
by

1 Answer

Answer :

(B) 20 to 40
by

Related questions

Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost. (A) 10 to 20 (B) 35 to 45 (C) 55 to 65 (D) 70 to 80

Description : Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost. (A) 10 to 20 (B) 35 to 45 (C) 55 to 65 (D) 70 to 80

Last Answer : (B) 35 to 45

'Lang factor' is defined as the ratio of the capital investment to the delivered cost of major equipments. The value of 'Lang factor' for fixed capital investment, for a solid-fluid processing chemical plant ranges from (A) 1.2 to 1.4 (B) 2.5 to 2.7 (C) 4.2 to 4.4 (D) 6.2 to 6.4

Description : 'Lang factor' is defined as the ratio of the capital investment to the delivered cost of major equipments. The value of 'Lang factor' for fixed capital investment, for a solid-fluid processing chemical plant ranges from (A) 1.2 to 1.4 (B) 2.5 to 2.7 (C) 4.2 to 4.4 (D) 6.2 to 6.4

Last Answer : C) 4.2 to 4.4

Cost of instrumentation in a modern chemical plant ranges from __________ percent of the total plant cost. (A) 5 to 10 (B) 20 to 30 (C) 40 to 50 (D) 60 to 70

Description : Cost of instrumentation in a modern chemical plant ranges from __________ percent of the total plant cost. (A) 5 to 10 (B) 20 to 30 (C) 40 to 50 (D) 60 to 70

Last Answer : (B) 20 to 30

'Utilities' in a chemical process plant includes compressed air, steam, water, electrical power, oxygen, acetylene, fuel gases etc. Utility costs for ordinary chemical process plants ranges roughly from __________ percent of the total product cost. (A) 1 to 5 (B) 10 to 20 (C) 25 to 35 (D) 35 to 45

Description : 'Utilities' in a chemical process plant includes compressed air, steam, water, electrical power, oxygen, acetylene, fuel gases etc. Utility costs for ordinary chemical process plants ranges roughly from __________ percent of the total product ... 1 to 5 (B) 10 to 20 (C) 25 to 35 (D) 35 to 45

Last Answer : (B) 10 to 20

Pick out the wrong statement. (A) The annual depreciation rate for machinery and equipments in a chemical process plant is about 10% of the fixed capital investment (B) Annual depreciation rate of buildings in a chemical plant is about 3% of its initial cost (C) Insurance rates on annual basis in a chemical plant may be about 1% of the fixed capital investment (D) In a chemical industry, research and development cost amounts to about 15% of net sales realisation (NSR)

Description : Pick out the wrong statement. (A) The annual depreciation rate for machinery and equipments in a chemical process plant is about 10% of the fixed capital investment (B) Annual depreciation rate ... chemical industry, research and development cost amounts to about 15% of net sales realisation (NSR)

Last Answer : (D) In a chemical industry, research and development cost amounts to about 15% of net sales realisation (NSR)

Cost of piping in a fluid processing unit (e.g., distillation) of a chemical process plant is about __________ percent of the fixed capital investment. (A) 4 (B) 13 (C) 22 (D) 34

Description : Cost of piping in a fluid processing unit (e.g., distillation) of a chemical process plant is about __________ percent of the fixed capital investment. (A) 4 (B) 13 (C) 22 (D) 34

Last Answer : (B) 13

Iron content in Indian iron ore is about __________ percent. (A) 80-85 (B) 60-65 (C) 40-45 (D) 20-25

Description : Iron content in Indian iron ore is about __________ percent. (A) 80-85 (B) 60-65 (C) 40-45 (D) 20-25

Last Answer : (B) 60-65

In an ordinary chemical plant, electrical installation cost may be about (A) 10-15% of purchased equipment cost (B) 3-10% of fixed capital investment (C) Either (A) or (B) (D) Neither (A) nor (B)

Description : In an ordinary chemical plant, electrical installation cost may be about (A) 10-15% of purchased equipment cost (B) 3-10% of fixed capital investment (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : (C) Either (A) or (B)

Most chemical plants use an initial working capital amounting to 10- 20% of the total capital investment. But this percentage may increase to __________ percent in case of seasonal products manufacturing plant. (A) 30 (B) 50 (C) 75 (D) 95

Description : Most chemical plants use an initial working capital amounting to 10- 20% of the total capital investment. But this percentage may increase to __________ percent in case of seasonal products manufacturing plant. (A) 30 (B) 50 (C) 75 (D) 95

Last Answer : (B) 50

The ratio of working capital to total capital investment for most chemical plants (except for non-seasonal based products) is in the range of __________ percent. (A) 0.1 to 1 (B) 1 to 2 (C) 10 to 20 (D) 50 to 60

Description : The ratio of working capital to total capital investment for most chemical plants (except for non-seasonal based products) is in the range of __________ percent. (A) 0.1 to 1 (B) 1 to 2 (C) 10 to 20 (D) 50 to 60

Last Answer : (C) 10 to 20

Yield of elemental phosphorous from rock phosphate is about __________ percent. (A) 1-2 (B) 15-25 (C) 40-45 (D) 60-65

Description : Yield of elemental phosphorous from rock phosphate is about __________ percent. (A) 1-2 (B) 15-25 (C) 40-45 (D) 60-65

Last Answer : (B) 15-25

Ash content in the middling coal (a byproduct of coal washeries) in India ranges between __________ percent. (A) 15 to 25 (B) 35 to 45 (C) 55 to 75 (D) 75

Description : Ash content in the middling coal (a byproduct of coal washeries) in India ranges between __________ percent. (A) 15 to 25 (B) 35 to 45 (C) 55 to 75 (D) 75

Last Answer : (B) 35 to 45

Maximum production start up cost for making a chemical plant operational is about __________ percent of the fixed capital cost. (A) 1 (B) 5 (C) 10 (D) 30

Description : Maximum production start up cost for making a chemical plant operational is about __________ percent of the fixed capital cost. (A) 1 (B) 5 (C) 10 (D) 30

Last Answer : (C) 10

Percentage content of silica in window glass, is (A) 40 to 45 (B) 50 to 55 (C) 60 to 65 (D) 70 to 75

Description : Percentage content of silica in window glass, is (A) 40 to 45 (B) 50 to 55 (C) 60 to 65 (D) 70 to 75

Last Answer : Answer: Option D

The 'total capital investment' for a chemical process plant comprises of the fixed capital investment and the (A) Overhead cost (B) Working capital (C) Indirect production cost (D) Direct production cost

Description : The 'total capital investment' for a chemical process plant comprises of the fixed capital investment and the (A) Overhead cost (B) Working capital (C) Indirect production cost (D) Direct production cost

Last Answer : (B) Working capital

High relative humidity decreases the evaporative process and as the temperature is increased, the relative humidity decreases. The comfort range for human body is the ambient temperature of 22 to 27°C with relative humidity ranging from __________ percent. (A) 5 to 10 (B) 15 to 25 (C) 45 to 50 (D) 75 to 80

Description : High relative humidity decreases the evaporative process and as the temperature is increased, the relative humidity decreases. The comfort range for human body is the ambient temperature of 22 to 27°C with relative humidity ranging from __________ ... to 10 (B) 15 to 25 (C) 45 to 50 (D) 75 to 80

Last Answer : (C) 45 to 50

Fixed capital investment of a chemical plant is the total amount of money needed to supply the necessary plant and manufacturing facilities plus the working capital for operation of the facilities. Which of the following components of fixed capital investment requires minimum percentage of it? (A) Electrical installation cost (B) Equipment installation cost (C) Cost for piping (D) Equipment insulation cost

Description : Fixed capital investment of a chemical plant is the total amount of money needed to supply the necessary plant and manufacturing facilities plus the working capital for operation of the facilities. Which of ... (B) Equipment installation cost (C) Cost for piping (D) Equipment insulation cost

Last Answer : (D) Equipment insulation cost

Pick out the wrong statement. (A) Longer tubes are less expensive per unit heat transfer area as compared to shorter tubes (B) A cost index is merely a number for a given year showing the cost at that time relative to a certain base year (C) Turnover ratio of a chemical plant is the ratio of gross annual sales to the fixed capital investment (D) Plates with butt welded joints are less expensive compared to lap welded joints, because squaring of plates is not necessary

Description : Pick out the wrong statement. (A) Longer tubes are less expensive per unit heat transfer area as compared to shorter tubes (B) A cost index is merely a number for a given year ... butt welded joints are less expensive compared to lap welded joints, because squaring of plates is not necessary

Last Answer : (D) Plates with butt welded joints are less expensive compared to lap welded joints, because squaring of plates is not necessary

Thermal efficiency of a limestone calcination rotary kiln may be around __________ percent. (A) 20 (B) 40 (C) 65 (D) 80

Description : Thermal efficiency of a limestone calcination rotary kiln may be around __________ percent. (A) 20 (B) 40 (C) 65 (D) 80

Last Answer : (B) 40

The profit of a company (whose capital is divided into 25‚000 shares of Rs. 10 each) for the last three years are : Rs. 50‚000; Rs. 60‚000 and Rs. 40‚000. The fair return on investment is taken at 10% p.a. The value of company’s share will be– (A) Rs. 10 (B) Rs. 20 (C) Rs. 30 (D) Rs. 40

Description : The profit of a company (whose capital is divided into 25‚000 shares of Rs. 10 each) for the last three years are : Rs. 50‚000; Rs. 60‚000 and Rs. 40‚000. The fair return on investment is taken at 10% p.a. The value of company’s share will be– (A) Rs. 10 (B) Rs. 20 (C) Rs. 30 (D) Rs. 40

Last Answer : Answer: Rs. 20

Mr. Xavier invested a certain amount in Debit and Equity funds in the ratio of 4 : 5 respectively. At the end of one year, he earned a total dividend of 30% on his investment. After one year he reinvested the amount including dividend in the ratio of 6 : 7 in Debt and Equity Funds. If the amount reinvested in Equity Funds was Rs. 94,500/-, what was the original amount invested in Equity Funds? (a) Rs. 75,000/- (b) Rs. 81,000/- (c) Rs. 60,000/- (d) Rs. 65,000/- (e) None of these

Description : Mr. Xavier invested a certain amount in Debit and Equity funds in the ratio of 4 : 5 respectively. At the end of one year, he earned a total dividend of 30% on his investment. After one year he reinvested the amount including ... . 81,000/- (c) Rs. 60,000/- (d) Rs. 65,000/- (e) None of these

Last Answer : (a) Rs. 75,000/-

Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70

Description : Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70

Last Answer : (B) 25-30

The upper limit of investment in plant and machinery for small-scale industries has been fixed currently at - (1) Rs. 35 lakhs (2) Rs. 45 lakhs (3) Rs. 60 lakhs (4) Rs. 1 crore

Description : The upper limit of investment in plant and machinery for small-scale industries has been fixed currently at - (1) Rs. 35 lakhs (2) Rs. 45 lakhs (3) Rs. 60 lakhs (4) Rs. 1 crore

Last Answer : (4) Rs. 1 crore Explanation: The upper limit of investment in plant and machinery for small-scale industries has been fixed at Rs. one crore.

The upper limit of investment in plant and machinery for smallscale industries has been fixed currently at (1) 35 lakhs (2) 45 lakhs (3) 60 lakhs (4) 1 crore

Description : The upper limit of investment in plant and machinery for smallscale industries has been fixed currently at (1) 35 lakhs (2) 45 lakhs (3) 60 lakhs (4) 1 crore

Last Answer : 1 crore

In a bag there are coins of 25p, 10p and 5p in the ratio 1:2:3.If there are Rs.45 in all then find how many 25p coins are there? A) 60 B) 65 C) 70 D) 75 E) None of these

Description : In a bag there are coins of 25p, 10p and 5p in the ratio 1:2:3.If there are Rs.45 in all then find how many 25p coins are there? A) 60 B) 65 C) 70 D) 75 E) None of these

Last Answer : Answer: D [(25x) + (10x × 2) + (5x × 3)] / 100 = 45 [25x + 20x + 15x] / 100 = 45 60 x = 4500 X = 4500/60 = 75

Relative cost of chemical process plants in India is about __________ percent more than the similar plants in U.S.A. (A) 15 (B) 35 (C) 55 (D) 75

Description : Relative cost of chemical process plants in India is about __________ percent more than the similar plants in U.S.A. (A) 15 (B) 35 (C) 55 (D) 75

Last Answer : (B) 35

On a test consisting of 500 questions, Dhivya answered 80% of the first 250 questions correctly. What percent of the other 250 questions does she need to answer correctly for her grade on the entire exam to be 60% ? a) 20 b) 60 c) 45 d) 80 e) 40

Description : On a test consisting of 500 questions, Dhivya answered 80% of the first 250 questions correctly. What percent of the other 250 questions does she need to answer correctly for her grade on the entire exam to be 60% ? a) 20 b) 60 c) 45 d) 80 e) 40

Last Answer : Answer: E  60% of 500 = 300  80% of 250 = 200 No. of correct answers in remaining 250 questions = 300 – 200  = 100  Percentage = 100 x 100/ 250  = 40%

Crushing efficiency of a machine ranges between __________ percent. (A) 0.1 to 2 (B) 5 to 10 (C) 20 to 25

Description : Crushing efficiency of a machine ranges between __________ percent. (A) 0.1 to 2 (B) 5 to 10 (C) 20 to 25

Last Answer : (A) 0.1 to 2

The optimum moisture content in solids to be crushed/ground ranges from __________ percent. (A) 3 to 4 (B) 8 to 10 (C) 10 to 15 (D) 15 to 20

Description : The optimum moisture content in solids to be crushed/ground ranges from __________ percent. (A) 3 to 4 (B) 8 to 10 (C) 10 to 15 (D) 15 to 20

Last Answer : (A) 3 to 4

Fast breeder nuclear reactors using enriched uranium as fuel may contain upto a maximum of __________ percent of U-235 (i.e. fissile material). (A) 15 (B) 45 (C) 65 (D) 85

Description : Fast breeder nuclear reactors using enriched uranium as fuel may contain upto a maximum of __________ percent of U-235 (i.e. fissile material). (A) 15 (B) 45 (C) 65 (D) 85

Last Answer : (D) 85

Carbon content in plain carbon steel is __________ percent. (A) 0.1 to 0.15 (B) 0.35 to 0.45 (C) 0.65 to 0.80 (D) 0.85 to 1.2

Description : Carbon content in plain carbon steel is __________ percent. (A) 0.1 to 0.15 (B) 0.35 to 0.45 (C) 0.65 to 0.80 (D) 0.85 to 1.2

Last Answer : (B) 0.35 to 0.45

According to Census 2001, what is the percentage of Indian population below the age 40? (1) 75 (2) 70 (3) 65 (4) 60

Description : According to Census 2001, what is the percentage of Indian population below the age 40? (1) 75 (2) 70 (3) 65 (4) 60

Last Answer : (1) 75 Explanation: As per Census 2001, the population below 15 years was 35 percent, > 60 years was 8 percent, and between 15 and 59 years of age was 57 percent of the total population. India has ... census, the percentage of Indian population below the age 6 is 13.1% and above the age 6 is 86.9

Trommels are revolving screens which normally operate in the range of __________ rpm. (A) 1 - 2 (B) 15 - 20 (C) 40 - 50 (D) 60 - 75

Description : Trommels are revolving screens which normally operate in the range of __________ rpm. (A) 1 - 2 (B) 15 - 20 (C) 40 - 50 (D) 60 - 75

Last Answer : (B) 15 - 20

The mean marks obtained by a class of 40 students is 65. The mean marks of half of the students is found to be 45. The mean marks of the remaining students is (A) 85 (B) 60 (C) 70 (D) 65

Description : The mean marks obtained by a class of 40 students is 65. The mean marks of half of the students is found to be 45. The mean marks of the remaining students is (A) 85 (B) 60 (C) 70 (D) 65

Last Answer : Answer: A

The disc angle of a disc plough ranges from? [a] 40-45 degree [b] 30-35 degree [c] 20-25 degree [d] 45-50 degree [e] None of the above

Description : The disc angle of a disc plough ranges from? [a] 40-45 degree [b] 30-35 degree [c] 20-25 degree [d] 45-50 degree [e] None of the above

Last Answer : [a] 40-45 degree

The spacing between the discs in the gang bolt ranges cm for lighy duty and cm heavy -duty harrows i. 15-25 and 25-30 c) 40-45 and 45-50 ii. 20-30 and 30-40. d) 15-25 and 32-36

Description : The spacing between the discs in the gang bolt ranges cm for lighy duty and cm heavy -duty harrows i. 15-25 and 25-30 c) 40-45 and 45-50 ii. 20-30 and 30-40. d) 15-25 and 32-36

Last Answer : 15-25 and 25-30

Thermal efficiency of blast furnace stoves used for heating blast (air) may be about __________ percent. (A) 20 (B) 40 (C) 60 (D) 80

Description : Thermal efficiency of blast furnace stoves used for heating blast (air) may be about __________ percent. (A) 20 (B) 40 (C) 60 (D) 80

Last Answer : (D) 80

Paper grade bamboo contains about __________ percent cellulose. (A) 5 (B) 20 (C) 40 (D) 60

Description : Paper grade bamboo contains about __________ percent cellulose. (A) 5 (B) 20 (C) 40 (D) 60

Last Answer : (A) 5

Chemical engineering plant cost index is used for finding the present cost of a particular chemical plant, if the cost of similar plant at some time in the past is known. The present cost of the plant = original cost × (index value at present/ index value at time original cost was obtained). The most major component of this cost index is (A) Fabricated equipment and machinery (B) Process instruments and control (C) Pumps and compressor (D) Electrical equipments and material

Description : Chemical engineering plant cost index is used for finding the present cost of a particular chemical plant, if the cost of similar plant at some time in the past is known. The present cost of ... (B) Process instruments and control (C) Pumps and compressor (D) Electrical equipments and material

Last Answer : (A) Fabricated equipment and machinery

Effluent treatment cost in a chemical plant is categorised as the __________ cost. (A) Fixed (B) Overhead (C) Utilities (D) Capital

Description : Effluent treatment cost in a chemical plant is categorised as the __________ cost. (A) Fixed (B) Overhead (C) Utilities (D) Capital

Last Answer : (C) Utilities

15) A retailer of ****** dog food prices at 75 pence a can of dog food. It cost the retailer 60 pence. What is the markup as a percentage of cost? A)8 percent B)25 percent C)20 percent D)12.5 percent

Description : 15) A retailer of Brandy dog food prices at 75 pence a can of dog food. It cost the retailer 60 pence. What is the markup as a percentage of cost? A)8 percent B)25 percent C)20 percent D)12.5 percent

Last Answer : B)25 percent

Investment is equal to : (1) gross total of all types of physical capital assets (2) gross total of all capital assets minus wear and tear (3) stock of plants, machines and equipments (4) None of the above

Description : Investment is equal to : (1) gross total of all types of physical capital assets (2) gross total of all capital assets minus wear and tear (3) stock of plants, machines and equipments (4) None of the above

Last Answer : (2) gross total of all capital assets minus wear and tear Explanation: Capital formation is frequently thought of as a measure of total "investment", in the sense of that portion of ... concept that includes investment in all kinds of capital assets, whether physical property or financial assets.

Investment is equal to - (1) gross total of all types of physical capital assets (2) gross total of all capital assets minus wear and tear (3) stock of plants, machines and equipments (4) None of these

Description : Investment is equal to - (1) gross total of all types of physical capital assets (2) gross total of all capital assets minus wear and tear (3) stock of plants, machines and equipments (4) None of these

Last Answer : (2) gross total of all capital assets minus wear and tear Explanation: Investment" is a broader concept that includes investment in all kinds of capital assets, whether physical property or financial assets. In ... out the loss in capital value of assets used due to wear & tear, obsolescence, etc.

Investment is equal to : (1) gross total of all types of physical capital assets (2) gross total of all capital assets minus wear and tear (3) stock of plants, machines and equipments (4) None of the above

Description : Investment is equal to : (1) gross total of all types of physical capital assets (2) gross total of all capital assets minus wear and tear (3) stock of plants, machines and equipments (4) None of the above

Last Answer : gross total of all capital assets minus wear and tear 

Maintain 850 OC for 1 hour (soaking time).  Cool the material to 60 OC in 4 hours. a) Calculate the efficiency of the furnace, if the specific heat of steel is 0.12 kcal/kgOC and fuel oil consumption per batch is 1400 litres.  GCV of fuel oil - 10200 kcal/kg,  Cost of fuel oil - Rs. 46,000/kL,  Sp. gr. of fuel oil - 0.92. b) Due to high cost of oil, the plant management decides to convert to a lower operating cost LPG fired furnace lined on the inside with ceramic fibre insulation and with an operating efficiency of 80%, for same requirement. The investment towards installation of the new furnace is Rs. 50 lakhs. Calculate the Return on Investment, if the plant operates two batches per day and 250 days in a year.  Cost of LPG - Rs. 75/kg,  GCV of LPG - 12500 kcal/kg.

Description : In a heat treatment shop, steel components are heat-treated in batches of 80 Tons. The  heat treatment cycle is as follows;  Increase temperature from 30 OC to 850 OC in 3 hours.  ... efficiency of 80%, for same requirement. The investment towards installation of  the new furnace is Rs. 50

Last Answer : Quantity of steel treated per batch - 80 Tons a. Efficiency of Furnace: Useful heat supplied to steel - 80000 x 0.12 x (850 - 30)   = 7872000 kcal/batch .1 mark Total heat ... = Rs. 64400/batch Efficiency of new LPG furnace - 80% Heat supplied in new LPG furnace - 7872000/0.8

In practice, the compression ratio of compression-ignition (CI) engine ranges from (A) 15 to 25 (B) 5 to 10 (C) 40 to 55 (D) 60 to 70

Description : In practice, the compression ratio of compression-ignition (CI) engine ranges from (A) 15 to 25 (B) 5 to 10 (C) 40 to 55 (D) 60 to 70

Last Answer : Option A

Manish purchased 25 kg of rice @ Rs32 per kg and 15 kg of rice @ Rs 36 per kg. He mixed the two varieties of rice and sold it @ Rs 40.20 per kg. What is the percent profit earned? 1. 25 2. 40 3. 30 4. 20

Description : Manish purchased 25 kg of rice @ Rs32 per kg and 15 kg of rice @ Rs 36 per kg. He mixed the two varieties of rice and sold it @ Rs 40.20 per kg. What is the percent profit earned? 1. 25 2. 40 3. 30 4. 20

Last Answer : 4. 20

In India, which one of the following should be considered the right combination of the age in days and live body weight in kg for a lamb for its weaning ? (A) 20 days to 30 days and 6 kg to 7 kg (B) 45 days to 60 days and 8 kg to 10 kg (C) 105 days to 120 days and 18 kg to 21 kg (D) 75 days to 90 days and 12 kg to 15 kg (E) 55 days to 70 days and 9 kg to 11 kg

Description : In India, which one of the following should be considered the right combination of the age in days and live body weight in kg for a lamb for its weaning ? (A) 20 days to 30 days and 6 kg to 7 kg (B) 45 days to 60 ... (D) 75 days to 90 days and 12 kg to 15 kg (E) 55 days to 70 days and 9 kg to 11 kg

Last Answer : (C) 105 days to 120 days and 18 kg to 21 kg

Sub soilders are operated at maximum depth of (a) 30-40 cm (b) 45-75 cm (c) 75-90 cm (d) 10-20 cm

Description : Sub soilders are operated at maximum depth of (a) 30-40 cm (b) 45-75 cm (c) 75-90 cm (d) 10-20 cm

Last Answer : (b) 45-75 cm

If 20 kg of coarse aggregate is sieved through 80 mm, 40 mm, 20 mm, 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron and 150 micron standard sieves and the weights retained are 0 kg, 2 kg, 8 kg, 6 kg, 4 kg respectively, the fineness modulus of the aggregate, is (A) 7.30 (B) 7.35 (C) 7.40 (D) 7.45

Description : If 20 kg of coarse aggregate is sieved through 80 mm, 40 mm, 20 mm, 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron and 150 micron standard sieves and the weights retained are 0 kg, 2 kg, 8 kg, ... , the fineness modulus of the aggregate, is (A) 7.30 (B) 7.35 (C) 7.40 (D) 7.45

Last Answer : Answer: Option C