Description : Pick out the wrong statement. (A) Both annealing and normalising release the internal stresses of the material besides improving the mechanical properties (B) Low carbon steel does not respond to ... are also used for surface hardening (D) Martempering of a material is a hardening process
Last Answer : Option C
Description : Pick the odd man out of the following. (A) Calorising (B) Pack carburising (C) Nitriding (D) Cyaniding
Last Answer : (A) Calorising
Description : Nitriding of steel is a process for (A) Case hardening (B) Spheroidising (C) Normalising (D) Annealing
Last Answer : (A) Case hardening
Description : __________ of hard alloy and tool steel is done to make it easily machinable. (A) Case carburising (B) Tempering (C) Normalising (D) Annealing
Last Answer : (B) Tempering
Description : Case hardening is not done by (A) Nitriding (B) Hot dipping (C) Electroplating (D) Both ‘b’ & ‘c’
Last Answer : Option D
Description : Case hardening of a material is (A) Followed by tempering or carburising (B) Preceded by its tempering (C) Done to get a soft ductile interior with a very hard surface (D) Carried out to get extreme hardness in its core
Last Answer : (D) Carried out to get extreme hardness in its core
Description : While normal carburising and nitriding surface treatments increase fatigue strength, excessive treatment may decrease the fatigue strength. Why ?
Last Answer : .Normal carburising/nitriding treatments increase volume due to phase transformation at Surface and introduce residual compressive surface stress and thus increase the fatigue strength. By excessive treatment the ... develop in the regions of high tensile stress and lead to early fatigue failure.
Description : Which of the following processes follows the hardening process for reducing the hardening strains & increasing the toughness of the steel part? (A) Anodising (B) Tempering (C) Carburising
Description : Globular form of cementite is formed during the __________ process. (A) Spheroidising (B) Hardening (C) Annealing (D) Normalising
Last Answer : (B) Hardening
Description : Spheroidising of a material is a/an __________ process. (A) Normalising (B) Annealing (C) Tempering (D) Hardening
Last Answer : (B) Annealing
Description : Hardened steel is softened by (A) Normalising (B) Tempering (C) Annealing (D) Carburising
Description : Softening of hardened steel is done by its (A) Normalising (B) Tempering (C) Annealing (D) Carburising
Last Answer : (A) Normalising
Description : Which of the following heat treatment processes is usually applied to castings? (A) Tempering (B) Annealing (C) Normalising (D) Carburising
Last Answer : (D) Carburising
Description : Elimination of brittleness resulting from welding of saw blades is done by __________ of the welded portion. (A) Annealing (B) Toughening (C) Work hardening (D) Tempering
Last Answer : (A) Annealing
Description : Cold worked steel parts are normally subjected to (A) Normalising (B) Hardening (C) Annealing (D) Shot peening
Last Answer : (C) Annealing
Description : Heating the Hypo-eutectoid steels to 30°C above the upper critical temperature line, soaking at that temperature and then cooling slowly to the room temperature to form a pearlite & ferrite structure is called (A) Tempering (B) Hardening (C) Annealing (D) Normalising
Description : ________ is not a heat treatment process. (A) Cyaniding (B) Parkerizing (C) Austempering (D) Martempering
Last Answer : (B) Parkerizing
Description : Nitriding of steel is done (in electric furnace) at __________ °C. (A) 510 (B) 1720 (C) 2210 (D) 910
Last Answer : (A) 510
Description : Steel is welded using the __________ flame. (A) Carburising (B) Neutral (C) Oxidising (D) All (A), (B) & (C)
Last Answer : Option B
Description : Occurrence of 'case hardening' during drying of a high moisture solid cake __________ the drying rate. (A) Increases (B) Decreases (C) Does not affect
Last Answer : (B) Decreases
Description : Carbon supply in pack carburising process is in the form of (A) Charcoal (B) Calcium carbide (C) Hydrocarbon oil (D) Graphite
Last Answer : (A) Charcoal
Description : A solid material shows case hardening properties while drying. Which of the following should be controlled to control the drying process? (A) Flow rate of inlet air (B) Relative humidity of outlet air (C) Humidity of inlet air (D) Temperature of the solid
Last Answer : (D) Temperature of the solid
Description : Statement - 1 : Nitriding is the process of heating steel in presence of `N_(2)` to form iron nirides . Statement -2 : The surface of steel becomes ha
Last Answer : Statement - 1 : Nitriding is the process of heating steel in presence of `N_(2)` to form iron ... Statement-1 : is false , statement-2 : is true
Description : Nitriding is a process of heating steel in atmosphere of :
Last Answer : Nitriding is a process of heating steel in atmosphere of : A. ammonia B. oxygen C. carbondioxide D. air
Description : Heat transfer takes place through a liquid medium surrounding the submerged material under heating, in case of a/an (A) Blast furnace (B) Steam boiler (C) Salt bath furnace (D) Annealing furnace
Last Answer : (C) Salt bath furnace
Description : The purpose of nitriding the steel is to (A) Harden its surface (B) Soften its surface (C) Improve its reliability (D) None of these
Last Answer : (A) Harden its surface
Description : Nitriding of a steel part does not increase its (A) Grain size (B) Fatigue limit (C) Surface hardness (D) Wear resistance
Description : Neutral atmosphere is maintained in a/an __________ furnace. (A) Cold rolled steel coil annealing (B) Open hearth (C) Soaking pit (D) Walking beam reheating
Last Answer : (A) Cold rolled steel coil annealing
Description : __________ iron is produced by the annealing of white cast iron. (A) Malleable (B) Nodular (C) Ductile (D) Grey
Last Answer : (A) Malleable
Description : Annealing of white cast iron produces __________ iron. (A) Grey (B) Nodular (C) Malleable (D) Spheroidal
Last Answer : (C) Malleable
Description : The heat treatment process applied to cold formed steel parts is (A) Normalising (B) Tempering (C) Artificial ageing (D) Solution annealing
Last Answer : (D) Solution annealing
Description : The heat treatment process to which castings and the steel balls produced by cold heading are subjected is (A) Tempering (B) Normalising (C) Annealing (D) None of these
Last Answer : (B) Normalising
Description : Which of the following processes is absent in glass manufacturing process? (A) Sintering (B) Annealing (C) Shaping or forming (D) Melting
Last Answer : (A) Sintering
Description : Hardening of steel is not possible unless it is heated __________ critical point. (A) Above the highest (B) Above the lowest (C) Between the first & second (D) Between the second & third
Last Answer : (B) Above the lowes
Description : Steel will respond to hardening by heat treatment processes, only when the minimum carbon content in it is __________ percent. (A) 0.02 (B) 0.2 (C) 0.35 (D) 0.5
Last Answer : (B) 0.2
Description : The increase in hardness of metal due to its cold working is termed as the __________ hardening. (A) Work (B) Age (C) Induction (D) Flame
Last Answer : (A) Work
Description : __________ of a material results, when its strength is increased & ductility is decreased by heating at a relatively lower temperature after cold working. (A) Solid solution hardening (B) Screw dislocation (C) Strain ageing (D) Twinning
Last Answer : (C) Strain ageing
Description : Cold working of a material results in increase in hardness, which is termed as the __________ hardening. (A) Cold (B) Work (C) Age (D) Induction
Last Answer : (B) Work
Description : Hardening of steel is not possible, unless it is heated __________ critical point. (A) Above the highest (B) Above the lowest (C) Between the first & second (D) Between the second & third
Last Answer : (B) Above the lowest
Description : Strain hardening effect in metals subjected to cold working is due to the __________ mechanism. (A) Slip (B) Fracture (C) Winning (D) Dislocation
Last Answer : (D) Dislocation
Description : Strain hardening effect in a metal subjected to cold working is due to the __________ mechanism. (A) Fracture (B) Dislocation (C) Slip (D) Twinning
Last Answer : (C) Slip
Description : The minimum carbon content in steel should be __________ percent for it to respond to a hardening treatment. (A) 0.2 (B) 0.4 (C) 0.6 (D) 0.8
Last Answer : Option A
Description : What is case hardening and why is case hardening done ?
Last Answer : The method used to harden the outer surface of steel is called case hardening . Case hardening is done for the following purposes: Increase the resistance to corrosion. 2. To create a shiny ... . . Creating resistance to chemical reactions. . To increase the durability of the product or product.
Description : How many types of case hardening and what are they ?
Last Answer : The case hardening method can be divided into the following sections. Namely: 1. Carburizing ( a) Pack Carburizing ( b) Gas Carburizing ( c ) Liquid Carburizing Cyaniding 3 . Nitriding 4 . Induction Hardening 5. Flame Hardening .
Description : With high frequency electric current hardening is achieved and is called as a) case hardening b) induction hardeningc) surface hardening d) metal hardening
Last Answer : b) induction hardening
Description : Annealing process is
Last Answer : Annealing process is A. heating the steel bright red and then cooling suddenly B. heating the steel ... charcol D. heating the rods of iron in ammonia
Description : In order to prevent the corrosion of iron pipes they are often coated with a layer of zinc. This process is termed as: A. Electroplating B. Annealing C. Galvanization D. Vulcanization
Last Answer : ANSWER: C
Description : In order to prevent the corrosion of iron pipes, they are often coated with a layer of zinc. This process is termed as (a) electroplating (b) annealing (c) galvanization (d) vulcanization
Last Answer : Ans:(c)