Description : Globular form of cementite is formed during the __________ process. (A) Spheroidising (B) Hardening (C) Annealing (D) Normalising
Last Answer : (B) Hardening
Description : . To improve the machinability of steel, it is generally subjected to (A) Spheroidising (B) Tempering (C) Normalising (D) Annealing
Last Answer : (A) Spheroidising
Description : Machinability of hard alloys and tool steels is improved by (A) Spheroidising (B) Annealing (C) Tempering (D) Normalising
Last Answer : Option B
Description : o improve the machinability of steel, it is generally subjected to (A) Spheroidising (B) Tempering (C) Normalising (D) Annealing
Last Answer : Option A
Description : Nitriding of steel is a process for (A) Case hardening (B) Spheroidising (C) Normalising (D) Annealing
Last Answer : (A) Case hardening
Description : Heating the Hypo-eutectoid steels to 30°C above the upper critical temperature line, soaking at that temperature and then cooling slowly to the room temperature to form a pearlite & ferrite structure is called (A) Tempering (B) Hardening (C) Annealing (D) Normalising
Last Answer : Option C
Description : Which of the following heat treatment processes is used for softening the hardened material? (A) Normalising (B) Tempering (C) Annealing (D) None of these
Last Answer : (B) Tempering
Description : Pick out the correct statement. (A) Hot worked materials are subjected to annealing to remove internal stresses (B) Annealing of steel hardens it slightly (C) Normalising of a material induces stresses (D) Tempering of a material improves ductility & toughness but reduces hardness & brittleness
Last Answer : (D) Tempering of a material improves ductility & toughness but reduces hardness & brittleness Share
Description : Pick out the wrong statement. (A) Both annealing and normalising release the internal stresses of the material besides improving the mechanical properties (B) Low carbon steel does not respond to ... are also used for surface hardening (D) Martempering of a material is a hardening process
Description : __________ of hard alloy and tool steel is done to make it easily machinable. (A) Case carburising (B) Tempering (C) Normalising (D) Annealing
Description : The heat treatment process applied to cold formed steel parts is (A) Normalising (B) Tempering (C) Artificial ageing (D) Solution annealing
Last Answer : (D) Solution annealing
Description : The heat treatment process to which castings and the steel balls produced by cold heading are subjected is (A) Tempering (B) Normalising (C) Annealing (D) None of these
Last Answer : (B) Normalising
Description : Hardened steel is softened by (A) Normalising (B) Tempering (C) Annealing (D) Carburising
Description : Softening of hardened steel is done by its (A) Normalising (B) Tempering (C) Annealing (D) Carburising
Description : Post weld heat treatment is done by (A) Normalising (B) Stress relieving (C) Tempering (D) Solution annealing
Last Answer : (B) Stress relieving
Last Answer : (A) Normalising
Description : Which of the following heat treatment processes is usually applied to castings? (A) Tempering (B) Annealing (C) Normalising (D) Carburising
Last Answer : (D) Carburising
Description : Elimination of brittleness resulting from welding of saw blades is done by __________ of the welded portion. (A) Annealing (B) Toughening (C) Work hardening (D) Tempering
Last Answer : (A) Annealing
Description : Cold worked steel parts are normally subjected to (A) Normalising (B) Hardening (C) Annealing (D) Shot peening
Last Answer : (C) Annealing
Description : __________ is not a case hardening process. (A) Carburising (B) Nitriding (C) Cyaniding (D) Annealing
Last Answer : (D) Annealing
Description : Case hardening of a material is (A) Followed by tempering or carburising (B) Preceded by its tempering (C) Done to get a soft ductile interior with a very hard surface (D) Carried out to get extreme hardness in its core
Last Answer : (D) Carried out to get extreme hardness in its core
Description : Which of the following processes follows the hardening process for reducing the hardening strains & increasing the toughness of the steel part? (A) Anodising (B) Tempering (C) Carburising
Description : Distinguish between hardening and normalising.
Last Answer : Hardening Normalizing 1. It is the process of heating steel at high temperature (800-9000C) and then suddenly cooled by dipping or quenching in some suitable medium. 1. It is the ... hardening. 6. It creates stresses in structure 6. It removes coarser grained structure.
Description : Differentiate Hardening and Tempering of Automobile Parts.
Last Answer : Differentiate Hardening and Tempering: Parameter Hardening Tempering Definition Hardening or quenching is the process of increasing the hardness of a material. Tempering is the process of ... a metal tempering is done to reduce the brittleness of quenched metal or alloy.
Description : __________ of a material results, when its strength is increased & ductility is decreased by heating at a relatively lower temperature after cold working. (A) Solid solution hardening (B) Screw dislocation (C) Strain ageing (D) Twinning
Last Answer : (C) Strain ageing
Description : Cold working of a material results in increase in hardness, which is termed as the __________ hardening. (A) Cold (B) Work (C) Age (D) Induction
Last Answer : (B) Work
Description : Tempering of a material does not improve its (A) Machinability (B) Toughness (C) Internal stress level (D) Softness
Last Answer : A) Machinability
Description : When the steel is subjected to normalising, its __________ decreases. (A) Yield point (B) Ductility (C) Ultimate tensile strength (UTS)
Last Answer : (B) Ductility
Description : Normalising does not __________ of a metal. (A) Improve machinability & tensile strength (B) Remove internal stresses (C) Refine the structure (D) Remove strains caused by cold working
Description : A solid material shows case hardening properties while drying. Which of the following should be controlled to control the drying process? (A) Flow rate of inlet air (B) Relative humidity of outlet air (C) Humidity of inlet air (D) Temperature of the solid
Last Answer : (D) Temperature of the solid
Description : __________ of grey cast iron produces white cast iron. (A) Tempering (B) Rapid heating (C) Rapid cooling (D) Slow cooling
Description : The process of coating steel sheets by zinc to improve its corrosion resistance is called (A) Calorising (B) Galvanising (C) Zincification (D) Tempering
Last Answer : (B) Galvanising
Description : Heat transfer takes place through a liquid medium surrounding the submerged material under heating, in case of a/an (A) Blast furnace (B) Steam boiler (C) Salt bath furnace (D) Annealing furnace
Last Answer : (C) Salt bath furnace
Description : Neutral atmosphere is maintained in a/an __________ furnace. (A) Cold rolled steel coil annealing (B) Open hearth (C) Soaking pit (D) Walking beam reheating
Last Answer : (A) Cold rolled steel coil annealing
Description : __________ iron is produced by the annealing of white cast iron. (A) Malleable (B) Nodular (C) Ductile (D) Grey
Last Answer : (A) Malleable
Description : Annealing of white cast iron produces __________ iron. (A) Grey (B) Nodular (C) Malleable (D) Spheroidal
Last Answer : (C) Malleable
Description : Work hardening of a material (A) Decreases its tensile strength (B) Decreases its ductility (C) Increases its ductility (D) Does not affect its ductility
Last Answer : (B) Decreases its ductility
Description : Pick out the correct statement. (A) Stainless steel is nothing but chromium coated steel (B) Hardening of a soft metal can be done by alloying it with another metal or non-metal (C) ... its temporary distortion under the action of applied stress (D) Rusting of iron is not electrochemical in nature
Last Answer : (B) Hardening of a soft metal can be done by alloying it with another metal or non-metal
Description : ________ cannot increase the fatigue strength of a material. (A) Grain refining (B) Grain coarsening (C) Surface hardening (D) Shot peening
Last Answer : (B) Grain coarsening
Description : Which of the following processes is absent in glass manufacturing process? (A) Sintering (B) Annealing (C) Shaping or forming (D) Melting
Last Answer : (A) Sintering
Description : Normalising of a casting does not (A) Induce stresses in it (B) Refine its grain structure (C) Reduce segregation (D) Improve its mechanical properties
Last Answer : (A) Induce stresses in it
Description : Normalising of an object does not (A) Refine coarse grain structure obtained during hot working (B) Improve ductility (C) Improve yield strength (D) Improve mechanical properties
Last Answer : (B) Improve ductility
Description : Hardening of steel is not possible unless it is heated __________ critical point. (A) Above the highest (B) Above the lowest (C) Between the first & second (D) Between the second & third
Last Answer : (B) Above the lowes
Description : Steel will respond to hardening by heat treatment processes, only when the minimum carbon content in it is __________ percent. (A) 0.02 (B) 0.2 (C) 0.35 (D) 0.5
Last Answer : (B) 0.2
Description : The increase in hardness of metal due to its cold working is termed as the __________ hardening. (A) Work (B) Age (C) Induction (D) Flame
Last Answer : (A) Work
Description : Occurrence of 'case hardening' during drying of a high moisture solid cake __________ the drying rate. (A) Increases (B) Decreases (C) Does not affect
Last Answer : (B) Decreases
Description : Hardening of steel is not possible, unless it is heated __________ critical point. (A) Above the highest (B) Above the lowest (C) Between the first & second (D) Between the second & third
Last Answer : (B) Above the lowest
Description : Strain hardening effect in metals subjected to cold working is due to the __________ mechanism. (A) Slip (B) Fracture (C) Winning (D) Dislocation
Last Answer : (D) Dislocation
Description : Strain hardening effect in a metal subjected to cold working is due to the __________ mechanism. (A) Fracture (B) Dislocation (C) Slip (D) Twinning
Last Answer : (C) Slip
Description : The minimum carbon content in steel should be __________ percent for it to respond to a hardening treatment. (A) 0.2 (B) 0.4 (C) 0.6 (D) 0.8