The heat treatment process to which castings and the steel balls produced by cold heading are subjected is (A) Tempering (B) Normalising (C) Annealing (D) None of these

The heat treatment process to which castings and the steel balls
produced by cold heading are subjected is
(A) Tempering
(B) Normalising
(C) Annealing
(D) None of these
by

1 Answer

Answer :

(B) Normalising
by

Related questions

Which of the following heat treatment processes is usually applied to castings? (A) Tempering (B) Annealing (C) Normalising (D) Carburising

Description : Which of the following heat treatment processes is usually applied to castings? (A) Tempering (B) Annealing (C) Normalising (D) Carburising

Last Answer : (D) Carburising

The heat treatment process applied to cold formed steel parts is (A) Normalising (B) Tempering (C) Artificial ageing (D) Solution annealing

Description : The heat treatment process applied to cold formed steel parts is (A) Normalising (B) Tempering (C) Artificial ageing (D) Solution annealing

Last Answer : (D) Solution annealing

. To improve the machinability of steel, it is generally subjected to (A) Spheroidising (B) Tempering (C) Normalising (D) Annealing

Description : . To improve the machinability of steel, it is generally subjected to (A) Spheroidising (B) Tempering (C) Normalising (D) Annealing

Last Answer : (A) Spheroidising

Pick out the correct statement. (A) Hot worked materials are subjected to annealing to remove internal stresses (B) Annealing of steel hardens it slightly (C) Normalising of a material induces stresses (D) Tempering of a material improves ductility & toughness but reduces hardness & brittleness

Description : Pick out the correct statement. (A) Hot worked materials are subjected to annealing to remove internal stresses (B) Annealing of steel hardens it slightly (C) Normalising of a material induces stresses (D) Tempering of a material improves ductility & toughness but reduces hardness & brittleness

Last Answer : (D) Tempering of a material improves ductility & toughness but reduces hardness & brittleness Share

o improve the machinability of steel, it is generally subjected to (A) Spheroidising (B) Tempering (C) Normalising (D) Annealing

Description : o improve the machinability of steel, it is generally subjected to (A) Spheroidising (B) Tempering (C) Normalising (D) Annealing

Last Answer : Option A

Which of the following heat treatment processes is used for softening the hardened material? (A) Normalising (B) Tempering (C) Annealing (D) None of these

Description : Which of the following heat treatment processes is used for softening the hardened material? (A) Normalising (B) Tempering (C) Annealing (D) None of these

Last Answer : (B) Tempering

Post weld heat treatment is done by (A) Normalising (B) Stress relieving (C) Tempering (D) Solution annealing

Description : Post weld heat treatment is done by (A) Normalising (B) Stress relieving (C) Tempering (D) Solution annealing

Last Answer : (B) Stress relieving

Hardened steel is softened by (A) Normalising (B) Tempering (C) Annealing (D) Carburising

Description : Hardened steel is softened by (A) Normalising (B) Tempering (C) Annealing (D) Carburising

Last Answer : (B) Tempering

Softening of hardened steel is done by its (A) Normalising (B) Tempering (C) Annealing (D) Carburising

Description : Softening of hardened steel is done by its (A) Normalising (B) Tempering (C) Annealing (D) Carburising

Last Answer : (B) Tempering

Softening of hardened steel is done by its (A) Normalising (B) Tempering (C) Annealing (D) Carburising

Description : Softening of hardened steel is done by its (A) Normalising (B) Tempering (C) Annealing (D) Carburising

Last Answer : (A) Normalising

__________ of hard alloy and tool steel is done to make it easily machinable. (A) Case carburising (B) Tempering (C) Normalising (D) Annealing

Description : __________ of hard alloy and tool steel is done to make it easily machinable. (A) Case carburising (B) Tempering (C) Normalising (D) Annealing

Last Answer : (B) Tempering

Cold worked steel parts are normally subjected to (A) Normalising (B) Hardening (C) Annealing (D) Shot peening

Description : Cold worked steel parts are normally subjected to (A) Normalising (B) Hardening (C) Annealing (D) Shot peening

Last Answer : (C) Annealing

Spheroidising of a material is a/an __________ process. (A) Normalising (B) Annealing (C) Tempering (D) Hardening

Description : Spheroidising of a material is a/an __________ process. (A) Normalising (B) Annealing (C) Tempering (D) Hardening

Last Answer : (B) Annealing

Heating the Hypo-eutectoid steels to 30°C above the upper critical temperature line, soaking at that temperature and then cooling slowly to the room temperature to form a pearlite & ferrite structure is called (A) Tempering (B) Hardening (C) Annealing (D) Normalising

Description : Heating the Hypo-eutectoid steels to 30°C above the upper critical temperature line, soaking at that temperature and then cooling slowly to the room temperature to form a pearlite & ferrite structure is called (A) Tempering (B) Hardening (C) Annealing (D) Normalising

Last Answer : Option C

Machinability of hard alloys and tool steels is improved by (A) Spheroidising (B) Annealing (C) Tempering (D) Normalising

Description : Machinability of hard alloys and tool steels is improved by (A) Spheroidising (B) Annealing (C) Tempering (D) Normalising

Last Answer : Option B

Nitriding of steel is a process for (A) Case hardening (B) Spheroidising (C) Normalising (D) Annealing

Description : Nitriding of steel is a process for (A) Case hardening (B) Spheroidising (C) Normalising (D) Annealing

Last Answer : (A) Case hardening

The heat treatment to which the steel wire containing > 0.25% carbon is subjected to is (A) Full annealing (B) Bright annealing (C) Patenting (D) None of these

Description : The heat treatment to which the steel wire containing > 0.25% carbon is subjected to is (A) Full annealing (B) Bright annealing (C) Patenting (D) None of these

Last Answer : C) Patenting

To improve the machinability of steel by its softening, it is subjected to (A) Cold working (B) Annealing (C) Shot blasting (D) Heating

Description : To improve the machinability of steel by its softening, it is subjected to (A) Cold working (B) Annealing (C) Shot blasting (D) Heating

Last Answer : (B) Annealing

Steel balls are manufactured by (A) Sintering (B) Casting (C) Cold heading (D) Spinning

Description : Steel balls are manufactured by (A) Sintering (B) Casting (C) Cold heading (D) Spinning

Last Answer : (C) Cold heading

Globular form of cementite is formed during the __________ process. (A) Spheroidising (B) Hardening (C) Annealing (D) Normalising

Description : Globular form of cementite is formed during the __________ process. (A) Spheroidising (B) Hardening (C) Annealing (D) Normalising

Last Answer : (B) Hardening

When the steel is subjected to normalising, its __________ decreases. (A) Yield point (B) Ductility (C) Ultimate tensile strength (UTS)

Description : When the steel is subjected to normalising, its __________ decreases. (A) Yield point (B) Ductility (C) Ultimate tensile strength (UTS)

Last Answer : (B) Ductility

Elimination of brittleness resulting from welding of saw blades is done by __________ of the welded portion. (A) Annealing (B) Toughening (C) Work hardening (D) Tempering

Description : Elimination of brittleness resulting from welding of saw blades is done by __________ of the welded portion. (A) Annealing (B) Toughening (C) Work hardening (D) Tempering

Last Answer : (A) Annealing

Neutral atmosphere is maintained in a/an __________ furnace. (A) Cold rolled steel coil annealing (B) Open hearth (C) Soaking pit (D) Walking beam reheating

Description : Neutral atmosphere is maintained in a/an __________ furnace. (A) Cold rolled steel coil annealing (B) Open hearth (C) Soaking pit (D) Walking beam reheating

Last Answer : (A) Cold rolled steel coil annealing

High purity nitrogen is used in (A) Making protective gas (95% N2 + 5% H2 ) for annealing of cold rolled steel strip coils (B) Fire fighting purposes (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : High purity nitrogen is used in (A) Making protective gas (95% N2 + 5% H2 ) for annealing of cold rolled steel strip coils (B) Fire fighting purposes (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Presence of silicon in steel (A) Is in the form of free Si (B) Indicates that steel is not deoxidised properly(C) Decreases the blow holes formation tendency in castings(D) None of these

Description : Presence of silicon in steel (A) Is in the form of free Si (B) Indicates that steel is not deoxidised properly (C) Decreases the blow holes formation tendency in castings (D) None of these

Last Answer : (C) Decreases the blow holes formation tendency in castings

The process of coating steel sheets by zinc to improve its corrosion resistance is called (A) Calorising (B) Galvanising (C) Zincification (D) Tempering

Description : The process of coating steel sheets by zinc to improve its corrosion resistance is called (A) Calorising (B) Galvanising (C) Zincification (D) Tempering

Last Answer : (B) Galvanising

Which of the following processes follows the hardening process for reducing the hardening strains & increasing the toughness of the steel part? (A) Anodising (B) Tempering (C) Carburising

Description : Which of the following processes follows the hardening process for reducing the hardening strains & increasing the toughness of the steel part? (A) Anodising (B) Tempering (C) Carburising

Last Answer : (B) Tempering

A post weld heat treatment may also be of benefit in minimizing the risk of weld decay, this heat treatment would be called? a) Stress relief b) Normalizing c) Quench and Tempering d) Solution treatment over 1000 °C

Description : A post weld heat treatment may also be of benefit in minimizing the risk of weld decay, this heat treatment would be called? a) Stress relief b) Normalizing c) Quench and Tempering d) Solution treatment over 1000 °C

Last Answer : d) Solution treatment over 1000 °C

Which of the following is a heat treatment furnace? (A) Muffle furnace (B) Annealing furnace (C) Reheating furnace (D) Rotary kiln

Description : Which of the following is a heat treatment furnace? (A) Muffle furnace (B) Annealing furnace (C) Reheating furnace (D) Rotary kiln

Last Answer : (B) Annealing furnace

Sherardizing process is used for (A) Surface coating (B) Heat treatment of high speed steel (C) Cold working on metals (D) None of these

Description : Sherardizing process is used for (A) Surface coating (B) Heat treatment of high speed steel (C) Cold working on metals (D) None of these

Last Answer : (A) Surface coating

Which of the following are examples of appropriate applications of additive manufacturing inthe actual production of parts and products? a.Castings made in small quantities b.Plastic parts in small batch sizes c.Mass-produced metal parts d.Special textile products

Description : Which of the following are examples of appropriate applications of additive manufacturing inthe actual production of parts and products? a.Castings made in small quantities b.Plastic parts in small batch sizes c.Mass-produced metal parts d.Special textile products

Last Answer : b.Plastic parts in small batch sizes

Normalising does not __________ of a metal. (A) Improve machinability & tensile strength (B) Remove internal stresses (C) Refine the structure (D) Remove strains caused by cold working

Description : Normalising does not __________ of a metal. (A) Improve machinability & tensile strength (B) Remove internal stresses (C) Refine the structure (D) Remove strains caused by cold working

Last Answer : Option B

Tempering of steel is done to make it (A) Brittle (B) Hard (C) Rollable (D) Soft

Description : Tempering of steel is done to make it (A) Brittle (B) Hard (C) Rollable (D) Soft

Last Answer : (D) Soft

Tempering of steel is done to make it (A) Brittle (B) Hard (C) Rollable (D) Soft

Description : Tempering of steel is done to make it (A) Brittle (B) Hard (C) Rollable (D) Soft

Last Answer : (D) Soft

_________ are normally subjected to sub-zero treatment. (A) Highly stressed parts (B) Gauges or precision parts (C) Cold rolled sheets (D) Non machinable materials

Description : _________ are normally subjected to sub-zero treatment. (A) Highly stressed parts (B) Gauges or precision parts (C) Cold rolled sheets (D) Non machinable materials

Last Answer : (B) Gauges or precision parts

Pick out the wrong statement. (A) Addition of methane to the furnace atmosphere reduces decarburising by hydrogen (B) Nitrogen in presence of steam decor-burises high carbon steel, whereas hydrocarbon gases carburise the surface of steel at annealing temperatures (C) Active nitrogen (formed by cracking ammonia at the metal surface) cause nitride formation with increase in surface hardness (D) None of these

Description : Pick out the wrong statement. (A) Addition of methane to the furnace atmosphere reduces decarburising by hydrogen (B) Nitrogen in presence of steam decor-burises high carbon steel, whereas hydrocarbon ... the metal surface) cause nitride formation with increase in surface hardness (D) None of these

Last Answer : (D) None of these

Protective gas used in the annealing furnace for steel coil comprises of (A) 95% N2 + 5% H2 (B) 5% H2 + 9% N2 (C) 100% CO (D) 100% H2

Description : Protective gas used in the annealing furnace for steel coil comprises of (A) 95% N2 + 5% H2 (B) 5% H2 + 9% N2 (C) 100% CO (D) 100% H2

Last Answer : (A) 95% N2 + 5% H2

Reverberatory furnace is used for (A) Roasting/reduction of ores (B) Annealing steel coil (C) Heating air (D) Steel melting

Description : Reverberatory furnace is used for (A) Roasting/reduction of ores (B) Annealing steel coil (C) Heating air (D) Steel melting

Last Answer : (A) Roasting/reduction of ores

Pick out the wrong statement. (A) Tin can be readily and very easily drawn into very fine wire (B) Tin can be severely cold worked without the necessity of annealing due to its low recrystallisation temperature (C) Tin exists in two allotropic forms

Description : Pick out the wrong statement. (A) Tin can be readily and very easily drawn into very fine wire (B) Tin can be severely cold worked without the necessity of annealing due to its low recrystallisation temperature (C) Tin exists in two allotropic forms

Last Answer : (A) Tin can be readily and very easily drawn into very fine wire

__________ iron is produced by the annealing of white cast iron. (A) Malleable (B) Nodular (C) Ductile (D) Grey

Description : __________ iron is produced by the annealing of white cast iron. (A) Malleable (B) Nodular (C) Ductile (D) Grey

Last Answer : (A) Malleable

Chilled iron castings are (A) Easily machinable (B) Soft on surface(C) Highly wear resistant(D) None of these

Description : Chilled iron castings are (A) Easily machinable (B) Soft on surface (C) Highly wear resistant (D) None of these

Last Answer : (C) Highly wear resistant

Silicon percentage in iron castings to have maximum hardness should be about (A) 0.3 (B) 0.5 (C) 0.8 (D) 2.5

Description : Silicon percentage in iron castings to have maximum hardness should be about (A) 0.3 (B) 0.5 (C) 0.8 (D) 2.5

Last Answer : (C) 0.8

Wrought metal is to be, A. Marble B. Quenched C. Subjected /undergone/ to cold treatment during processing (annealed)

Description : Wrought metal is to be, A. Marble B. Quenched C. Subjected /undergone/ to cold treatment during processing (annealed)

Last Answer : C. Subjected /undergone/ to cold treatment during processing (annealed)

Heat transfer takes place through a liquid medium surrounding the submerged material under heating, in case of a/an (A) Blast furnace (B) Steam boiler (C) Salt bath furnace (D) Annealing furnace

Description : Heat transfer takes place through a liquid medium surrounding the submerged material under heating, in case of a/an (A) Blast furnace (B) Steam boiler (C) Salt bath furnace (D) Annealing furnace

Last Answer : (C) Salt bath furnace

America's Next Top Model.. Tapes or Castings?

Description : America's Next Top Model.. Tapes or Castings?

Last Answer : http://www.cwtv.com/thecw/topmodel-cycle13-Casting Looks like you have to attend one of the casting calls and download and complete the application to bring with you. (Google is really very easy to use)

Pheretima posthuma is highly useful as (a) their burrows make the soil loose (b) they make the soil porous, leave their castings and take organic debris in the soil (c) they are used as fish meal (d) they kill the birds due to biomagnification of chlorinated hydrocarbons.

Description : Pheretima posthuma is highly useful as (a) their burrows make the soil loose (b) they make the soil porous, leave their castings and take organic debris in the soil (c) they are used as fish meal (d) they kill the birds due to biomagnification of chlorinated hydrocarbons.

Last Answer : (b) they make the soil porous, leave their castings and take organic debris in the soil

Flanges and flanged fittings may be constructed of which of the following materials? a) Castings. b) Forgings. c) Plate. d) All of the above.

Description : Flanges and flanged fittings may be constructed of which of the following materials? a) Castings. b) Forgings. c) Plate. d) All of the above.

Last Answer : d) All of the above.

__________ is not a case hardening process.(A) Carburising (B) Nitriding (C) Cyaniding (D) Annealing

Description : __________ is not a case hardening process. (A) Carburising (B) Nitriding (C) Cyaniding (D) Annealing

Last Answer : (D) Annealing

Which of the following processes is absent in glass manufacturing process? (A) Sintering (B) Annealing (C) Shaping or forming (D) Melting

Description : Which of the following processes is absent in glass manufacturing process? (A) Sintering (B) Annealing (C) Shaping or forming (D) Melting

Last Answer : (A) Sintering