In drop forging process, the forging is done by dropping the __________ at high velocity. (A) Hammer (B) Workpiece (C) Die with hammer (D) Weight on hammer

In drop forging process, the forging is done by dropping the
__________ at high velocity.
(A) Hammer
(B) Workpiece
(C) Die with hammer
(D) Weight on hammer
by

1 Answer

Answer :

(C) Die with hammer
by

Related questions

(i) Compare Open Die Forging and Close Die Forging. (ii) Explain with neat sketch process of Drop Forging.

Description : (i) Compare Open Die Forging and Close Die Forging. (ii) Explain with neat sketch process of Drop Forging.

Last Answer : (i) Difference between Open Die and Close Die Forging: (ii)Drop Forging  Drop forging is carried out by using drop hammers. They are board or gravity hammer, air lift hammer and power drop ... of upper and lower dies. The ram is fastened to the lower end of vertical hard wood board.

Mild steel is used for making (A) Fish plates (B) Die block (C) Channels (D) Drop forging

Description : Mild steel is used for making (A) Fish plates (B) Die block (C) Channels (D) Drop forging

Last Answer : (C) Channels

Which process allows controlling grain structure of the product? a) Casting b) Forging c) None of the mentioned d) Die Casting

Description : Which process allows controlling grain structure of the product? a) Casting b) Forging c) None of the mentioned d) Die Casting

Last Answer : b) Forging

Explain drop forging with neat sketch.

Description : Explain drop forging with neat sketch. 

Last Answer : Drop Forging Process: Drop forging is carried out by using drop hammers. They are board or gravity hammer, air lift hammer and power drop hammer. Anvil of drop forging hammer is attached to the frame ... [5] This energy will be delivered to the metal work-piece to produce plastic deformation.  

Explain drop forging

Description : Explain drop forging

Last Answer : Drop Forging Process: Drop forging is carried out by using drop hammers. They are board or gravity hammer, air lift hammer and power drop hammer. Anvil of drop forging hammer is attached to the frame ... 5] This energy will be delivered to the metal work-piece to produce plastic deformation. 

What are the steps in drop forging?

Description : What are the steps in drop forging? 

Last Answer : Drop Forging Process:  Drop forging is carried out by using drop hammers. They are board or gravity hammer, air lift hammer and power drop hammer. Anvil of drop forging hammer is attached to the ... . [5] This energy will be delivered to the metal work-piece to produce plastic deformation. 

Compare drop forging and press forging.

Description : Compare drop forging and press forging. 

Last Answer : Comparison of Drop Forging and Press Forging: 

Steel pipes are normally manufactured by __________ process. (A) Extrusion (B) Cold working (C) Forging (D) Electroforming

Description : Steel pipes are normally manufactured by __________ process. (A) Extrusion (B) Cold working (C) Forging (D) Electroforming

Last Answer : (A) Extrusion

A jet engine turbine blade is normally manufactured by (A) Forging (B) Shell moulding (C) Investment casting (D) Pressure die casting

Description : A jet engine turbine blade is normally manufactured by (A) Forging (B) Shell moulding (C) Investment casting (D) Pressure die casting

Last Answer : (C) Investment casting

Size reduction of moulding powders, waxes, resins & gums are done in a __________ mill. (A) Cage (B) Hammer (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Size reduction of moulding powders, waxes, resins & gums are done in a __________ mill. (A) Cage (B) Hammer (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

In the CNC machine which device used to hold the workpiece? a.Automatic pallet changer b.Automatic work part positioner c.A & B both d.None of the above

Description : In the CNC machine which device used to hold the workpiece? a.Automatic pallet changer b.Automatic work part positioner c.A & B both d.None of the above

Last Answer : c.A & B both

The distance of a given tool tip from the surface of workpiece is known as….. a.Tool length b.Tool length offset H c.Cutter radius d.Compensation

Description : The distance of a given tool tip from the surface of workpiece is known as….. a.Tool length b.Tool length offset H c.Cutter radius d.Compensation

Last Answer : b.Tool length offset H

To indicate the position of the workpiece ly & easily machine zero pint should be displacedto another point on the workpiece called… a.Workpiece zero Point b.machine Zero Point c.Start Point d.Program Zero point

Description : To indicate the position of the workpiece ly & easily machine zero pint should be displacedto another point on the workpiece called… a.Workpiece zero Point b.machine Zero Point c.Start Point d.Program Zero point

Last Answer : a.Workpiece zero Point

What use of vice jaw plates to protect the workpiece from damage?

Description : What use of vice jaw plates to protect the workpiece from damage?

Last Answer : What is the answer ?

Explain closed die forging with neat sketch

Description : Explain closed die forging with neat sketch

Last Answer : Impression die & Closed die forging process: Closed Die forging is also known as impression die forging. Close die forging process consist of specially prepared dies to manufacturing forged parts in large ... of accuracy. Complex shaped parts can be easily forged by this forging process.  

Differentiate between open die forging and close die forging.

Description : Differentiate between open die forging and close die forging.

Last Answer : Difference between open die and close die forging:

Classify closed die forging. Explain any one with neat sketch.

Description : Classify closed die forging. Explain any one with neat sketch. 

Last Answer : Classification of closed / Impression die forging:- 1) drop forging 2) press forging 3) machine forging 4) Single die 5) Multi die close die forging :- Close die forging is also called as ... the first forging is made. after forging operation the part must be trimmed to remove the flash.

A pile is being driven with a drop hammer weighing 1800 kg and having a free fall of 1.00 m. If the penetration with last blow is 5 mm, the load carrying capacity of the pile, -according to the Engineering News formula, is (A) 100 tonnes (B) 50 tonnes (C) 20 tonnes (D) 10 tonnes

Description : A pile is being driven with a drop hammer weighing 1800 kg and having a free fall of 1.00 m. If the penetration with last blow is 5 mm, the load carrying capacity of the pile, -according to the Engineering News formula, is (A) 100 tonnes (B) 50 tonnes (C) 20 tonnes (D) 10 tonnes

Last Answer : (D) 10 tonnes

Piles are usually driven by (A) Diesel operated hammer (B) Drop hammer (C) Single acting steam hammer (D) All the above

Description : Piles are usually driven by (A) Diesel operated hammer (B) Drop hammer (C) Single acting steam hammer (D) All the above

Last Answer : Answer: Option D

Engineering news formula for obtaining safe bearing capacity of pile for drop hammer, is, (A) Q = Wh/6 (S + 2.5) (B) Q = Wh/2.5 (S + 6) (C) Q = (W × 6)/h (S + 2.5) (D) Q = (W × 2.5)/6 (S + h)

Description : Engineering news formula for obtaining safe bearing capacity of pile for drop hammer, is, (A) Q = Wh/6 (S + 2.5) (B) Q = Wh/2.5 (S + 6) (C) Q = (W × 6)/h (S + 2.5) (D) Q = (W × 2.5)/6 (S + h)

Last Answer : Answer: Option A

Hollow shafts can be made as strong as solid shafts by making the twisting moments of both the shafts same. Shafts made by __________ have residual stresses. (A) Forging (B) Cold rolling (C) Hot rolling (D) Casting

Description : Hollow shafts can be made as strong as solid shafts by making the twisting moments of both the shafts same. Shafts made by __________ have residual stresses. (A) Forging (B) Cold rolling (C) Hot rolling (D) Casting

Last Answer : (B) Cold rolling

Water hammer is caused, when water flowing in a pipe is suddenly brought to rest by closing the valve. The extent of pressure thus produced due to water hammer depends on the (A) Pipe length (B) Fluid velocity in the pipe (C) Time taken to close the valve (D) All (A), (B) and (C)

Description : Water hammer is caused, when water flowing in a pipe is suddenly brought to rest by closing the valve. The extent of pressure thus produced due to water hammer depends on the (A) Pipe length (B) Fluid velocity in the pipe (C) Time taken to close the valve (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The fluid velocity varies as the cube of the cylindrical pipe diameter in case of steady state laminar flow at constant pressure drop for __________ fluid. (A) Newtonian (B) Pseudo-plastic (C) Dilatent (D) Bingham plastic

Description : The fluid velocity varies as the cube of the cylindrical pipe diameter in case of steady state laminar flow at constant pressure drop for __________ fluid. (A) Newtonian (B) Pseudo-plastic (C) Dilatent (D) Bingham plastic

Last Answer : (B) Pseudo-plastic

The fluid velocity varies as the square of the cylindrical pipe diameter, in case of steady state laminar flow at constant pressure drop, for __________ fluid. (A) Newtonian (B) Dilatant (C) Pseudo-plastic (D) Non-Newtonian

Description : The fluid velocity varies as the square of the cylindrical pipe diameter, in case of steady state laminar flow at constant pressure drop, for __________ fluid. (A) Newtonian (B) Dilatant (C) Pseudo-plastic (D) Non-Newtonian

Last Answer : (A) Newtonian

The fluid velocity varies as the square root of the cylindrical pipe diameter in case of steady state laminar flow at constant pressure drop of __________ fluid. (A) Dilatent (B) Pseudo-plastic (C) Bingham plastic (D) Newtonian

Description : The fluid velocity varies as the square root of the cylindrical pipe diameter in case of steady state laminar flow at constant pressure drop of __________ fluid. (A) Dilatent (B) Pseudo-plastic (C) Bingham plastic (D) Newtonian

Last Answer : (A) Dilatent

Size reduction of asbestos and mica is done by (A) Hammer mills (B) Rod mills (C) Gyratory crushers (D) Crushing rolls

Description : Size reduction of asbestos and mica is done by (A) Hammer mills (B) Rod mills (C) Gyratory crushers (D) Crushing rolls

Last Answer : (A) Hammer mills

Surge tanks are used (A) For storage water (B) To increase the velocity in a pipeline (C) As overflow valves (D) To guard against water hammer

Description : Surge tanks are used  (A) For storage water  (B) To increase the velocity in a pipeline  (C) As overflow valves  (D) To guard against water hammer 

Last Answer : (D) To guard against water hammer 

19. The water hammer in pipes occurs due to sudden change in the velocity of flowing liquid A) Agree B) Disagree

Description : 19. The water hammer in pipes occurs due to sudden change in the velocity of flowing liquid A) Agree B) Disagree

Last Answer : A

A 600kg hammer of a pile driver is lilted 2m the pilling head. What is the change of potential energy? If the hammer is realest. What will be its velocity and the instant if it sticks the pilling?  a. 10,772 N-m and 5.26m/s  b. 13,200 N-m and 5.26m/s  c. 11,772 N-m and 6.26m/s  d. 11,77 2N-m and5.26m/s ∫PE = mgo(∫Z)/gc

Description : A 600kg hammer of a pile driver is lilted 2m the pilling head. What is the change of potential energy? If the hammer is realest. What will be its velocity and the instant if it sticks the pilling?  a. 10,772 N-m and 5.26m/s ...  c. 11,772 N-m and 6.26m/s  d. 11,77 2N-m and5.26m/s ∫PE = mgo(∫Z)/gc

Last Answer : 11,772 N-m and 6.26m/s

Which of the following process is not formative process? a.Bending b.Plastic injection molding c.Selective Laser Sintering d.Forging

Description : Which of the following process is not formative process? a.Bending b.Plastic injection molding c.Selective Laser Sintering d.Forging

Last Answer : c.Selective Laser Sintering

List any four applications of forging process.

Description : List any four applications of forging process. 

Last Answer : Applications of Forging Process: 1. Connecting rod 2. Crankshaft 3. Camshaft 4. Spanner 5. Alloy wheel 6. Differential gears 7. Drive shafts 8. Clutch hubs 9. Universal joints 10. Hand Tools

State any two advantages of forging process.

Description : State any two advantages of forging process. 

Last Answer : Advantages of forging processes: 1) Complex shaped parts can be forged 2) Mass production with greater accuracy is achieved. 3) It is very easy to maintain close tolerances. 4) ... highly skilled operator. 6) Better reproducibility. 7) Machining is not necessary to obtain final shape 

Enlist any four operations carried out in forging process and explain fullering with neat sketch.

Description : Enlist any four operations carried out in forging process and explain fullering with neat sketch.

Last Answer : Operations carried out in forging process:  a) Upsetting b) Drawing Down c) Setting down d) Welding e) Bending f) Cutting g) Punching Fullering: In ... sledge hammer. The force is applied on the top fuller which results in decreasing the cross section at that point.

Explain forging process used to manufacture the spanners.

Description : Explain forging process used to manufacture the spanners. 

Last Answer : Answer: Forging process used for production of spanner: 1) Fullering -The heated stock is elongated by reducing its cross section in first die.  2) Edging- The metal is redistributed, ... Trimming: Flash is removed   (6) Heat treatment and machining is done as per requirement.   

Run of mine (ROM) coal is crushed by a __________ for use in domestic ovens. (A) Jaw crusher (B) Hammer crusher (C) Ball mill (D) Tube mil

Description : Run of mine (ROM) coal is crushed by a __________ for use in domestic ovens. (A) Jaw crusher (B) Hammer crusher (C) Ball mill (D) Tube mil

Last Answer : (B) Hammer crusher

__________ mills are termed as impactors. (A) Hammer (B) Cage (C) Rolling-compression (D) None of these

Description : __________ mills are termed as impactors. (A) Hammer (B) Cage (C) Rolling-compression (D) None of these

Last Answer : (A) Hammer

On being hit with a hammer, __________ will readily fracture. (A) Brass (B) Mild steel (C) Cast iron (D) Lead

Description : On being hit with a hammer, __________ will readily fracture. (A) Brass (B) Mild steel (C) Cast iron (D) Lead

Last Answer : C) Cast iron

Flooding in a column results due to (A) High pressure drop (B) Low pressure drop (C) Low velocity of the liquid (D) High temperature

Description : Flooding in a column results due to (A) High pressure drop (B) Low pressure drop (C) Low velocity of the liquid (D) High temperature

Last Answer : (A) High pressure drop

Wrought iron is never shaped by (A) Casting (B) Cold working (C) Forging (D) Welding

Description : Wrought iron is never shaped by (A) Casting (B) Cold working (C) Forging (D) Welding

Last Answer : (A) Casting

The most effective method of locating a loose commutator bar in a D.C. motor is by _____________. A. visual inspection B. jiggling each by hand C. sounding each bar with a light weight hammer D. checking with a calibrated torque wrench

Description : The most effective method of locating a loose commutator bar in a D.C. motor is by _____________. A. visual inspection B. jiggling each by hand C. sounding each bar with a light weight hammer D. checking with a calibrated torque wrench

Last Answer : Answer: C

The weight of rivet testing hammer is

Description : The weight of rivet testing hammer is

Last Answer : 110 gm

Surge tanks are provided in high pressure water pipelines to (A) Store a definite quantity of water all the time (B) Reduce the water hammer (C) Facilitate easy dismantling of pipeline for cleaning and maintenance (D) None of these

Description : Surge tanks are provided in high pressure water pipelines to (A) Store a definite quantity of water all the time (B) Reduce the water hammer (C) Facilitate easy dismantling of pipeline for cleaning and maintenance (D) None of these

Last Answer : (B) Reduce the water hammer

Water hammer is caused in steam carrying pipelines, because of (A) Partial condensation of steam (B) Vibration of the pipeline (C) High degree of superheat of steam (D) Its exposure to torrential rain

Description : Water hammer is caused in steam carrying pipelines, because of (A) Partial condensation of steam (B) Vibration of the pipeline (C) High degree of superheat of steam (D) Its exposure to torrential rain

Last Answer : (A) Partial condensation of steam

Pick out the wrong statement. (A) Critical moisture content is not a property of the material itself (B) A sharp increase in pressure drop gives an indication of the flooding in a distillation column (C) Separation of components is not possible in liquid extraction, if selectivity is unity (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Description : Pick out the wrong statement. (A) Critical moisture content is not a property of the material itself (B) A sharp increase in pressure drop gives an indication of the flooding in a ... unity (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Last Answer : (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

In continuous filtration (at a constant pressure drop), filtrate flow rate varies inversely as the (A) Square root of the velocity (B) Square of the viscosity (C) Filtration time only (D) Washing time only

Description : In continuous filtration (at a constant pressure drop), filtrate flow rate varies inversely as the (A) Square root of the velocity (B) Square of the viscosity (C) Filtration time only (D) Washing time only

Last Answer : (A) Square root of the velocity

Priming in a distillation column (A) Results from very low gas velocity (B) Is desirable from point efficiency consideration (C) Is characterised by the presence of foam throughout the space between trays (D) Reduces the overall pressure drop

Description : Priming in a distillation column (A) Results from very low gas velocity (B) Is desirable from point efficiency consideration (C) Is characterised by the presence of foam throughout the space between trays (D) Reduces the overall pressure drop

Last Answer : (C) Is characterised by the presence of foam throughout the space between trays

With increase in the liquid flow rate at a fixed gas velocity in a randomly packed counter current gas-liquid absorption column, the gas pressure drop (A) Decreases (B) Remains unchanged (C) Increases (D) Decreases exponentially

Description : With increase in the liquid flow rate at a fixed gas velocity in a randomly packed counter current gas-liquid absorption column, the gas pressure drop (A) Decreases (B) Remains unchanged (C) Increases (D) Decreases exponentially

Last Answer : (C) Increases

Pick out the wrong statement. (A) Heat transfer by radiation cannot occur across an absolute volume (B) In case of a shell and tube heat exchanger, the pressure drop through the shell is proportional to the number of times the fluid crosses the bundle between baffles (C) Propagation velocity for travel of heat radiation through vacuum is equal to the velocity of the light (D) The amount of heat involved in the condensation or vaporisation of 1 kg of a fluid is the same

Description : Pick out the wrong statement. (A) Heat transfer by radiation cannot occur across an absolute volume (B) In case of a shell and tube heat exchanger, the pressure drop through the shell is ... The amount of heat involved in the condensation or vaporisation of 1 kg of a fluid is the same

Last Answer : (A) Heat transfer by radiation cannot occur across an absolute volume

Shell side pressure drop in a shell and tube heat exchanger does not depend upon the (A) Baffle spacing & shell diameter (B) Tube diameter & pitch (C) Viscosity, density & mass velocity of shell side fluid (D) None of these

Description : Shell side pressure drop in a shell and tube heat exchanger does not depend upon the (A) Baffle spacing & shell diameter (B) Tube diameter & pitch (C) Viscosity, density & mass velocity of shell side fluid (D) None of these

Last Answer : (D) None of these

A gas (density = 1.5 kg/m3 , viscosity = 2 × 10 ‒5 kg/m.s) flowing through a packed bed (particle size = 0.5 cm, porosity = 0.5) at a superficial velocity of 2 m/s causes a pressure drop of 8400 Pa/m. The pressure drop for another gas, with density of 1.5 kg/m3and viscosity of 3 × 10 ‒5kg/m.s flowing at 3 m/s will be (A) 8400 Pa/m (B) 12600 Pa/m (C) 18900 Pa/m (D) 16800 Pa/m

Description : A gas (density = 1.5 kg/m3 , viscosity = 2 10 -5 kg/m.s) flowing through a packed bed (particle size = 0.5 cm, porosity = 0.5) at a superficial velocity of 2 m/s causes a pressure drop of 8400 Pa/m. The ... flowing at 3 m/s will be (A) 8400 Pa/m (B) 12600 Pa/m (C) 18900 Pa/m (D) 16800 Pa/m

Last Answer : (B) 12600 Pa/m