Water hammer is caused in steam carrying pipelines, because of (A) Partial condensation of steam (B) Vibration of the pipeline (C) High degree of superheat of steam (D) Its exposure to torrential rain

Water hammer is caused in steam carrying pipelines, because of (A) Partial condensation of steam
(B) Vibration of the pipeline
(C) High degree of superheat of steam
(D) Its exposure to torrential rain
by

1 Answer

Answer :

(A) Partial condensation of steam
by

Related questions

Pipelines carrying various utilities in chemical industries are identified by their colour codes. The color of pipeline carrying steam is (A) Black (B) Silver grey (C) Green (D) Yellow

Description : Pipelines carrying various utilities in chemical industries are identified by their colour codes. The color of pipeline carrying steam is (A) Black (B) Silver grey (C) Green (D) Yellow

Last Answer : ) Silver grey

Surge tanks are provided in high pressure water pipelines to (A) Store a definite quantity of water all the time (B) Reduce the water hammer (C) Facilitate easy dismantling of pipeline for cleaning and maintenance (D) None of these

Description : Surge tanks are provided in high pressure water pipelines to (A) Store a definite quantity of water all the time (B) Reduce the water hammer (C) Facilitate easy dismantling of pipeline for cleaning and maintenance (D) None of these

Last Answer : (B) Reduce the water hammer

Steam trap is used to (A) Condense the steam flowing in the pipeline (B) Remove water resulting from partial condensation of steam (C) Stop the supply of steam (D) None of these

Description : Steam trap is used to (A) Condense the steam flowing in the pipeline (B) Remove water resulting from partial condensation of steam (C) Stop the supply of steam (D) None of these

Last Answer : (B) Remove water resulting from partial condensation of steam

Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation (B) Cavitation may be caused due to boiling of liquid by decreasing the pressure resulting in formation & collapse of vapor cavities (C) Cavitation begins at higher static pressure and lower velocity in larger diameter pipelines resulting in audible noise(D) Large scale cavitation cannot damage pipeline, restrict fluid flow anddamage steam turbine blades

Description : Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation ... (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

Last Answer : (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

The steam ejector is used to (A) Remove condensate from the steam pipelines (B) Create vacuum (C) Superheat the steam (D) None of these

Description : The steam ejector is used to (A) Remove condensate from the steam pipelines (B) Create vacuum (C) Superheat the steam (D) None of these

Last Answer : (B) Create vacuum

Water hammer in a pipeline results from the (A) Bursting of pipelines due to closure by a valve (B) Rapid pressure change due to a rapid change in the rate of flow (C) Pressure increase due to closure of a valve resulting in decrease in rate of flow (D) None of these

Description : Water hammer in a pipeline results from the (A) Bursting of pipelines due to closure by a valve (B) Rapid pressure change due to a rapid change in the rate of flow (C) Pressure increase due to closure of a valve resulting in decrease in rate of flow (D) None of these

Last Answer : (B) Rapid pressure change due to a rapid change in the rate of flow

Disc compensators are provided in large diameter fuel gas carrying pipelines to (A) Keep the pipe in proper orientation (B) Make the pipe joint leak-proof (C) Account for contraction/expansion of pipe due to temperature changes of the surroundings (D) Account for the pressure variation side the pipeline

Description : Disc compensators are provided in large diameter fuel gas carrying pipelines to (A) Keep the pipe in proper orientation (B) Make the pipe joint leak-proof (C) Account for contraction/expansion ... due to temperature changes of the surroundings (D) Account for the pressure variation side the pipeline

Last Answer : (C) Account for contraction/expansion of pipe due to temperature changes of the surroundings

Secondary cooling circuit is a must in molten sodium cooled fast breeder reactor for (A) Achieving high degree of superheat in the steam (B) Faster heat removal rate from the core(C) Lowering the coolant circulation pressure(D) Avoiding the mixing of water with radioactive sodium, as it may causeexplosion

Description : Secondary cooling circuit is a must in molten sodium cooled fast breeder reactor for (A) Achieving high degree of superheat in the steam (B) Faster heat removal rate from the core (C) ... circulation pressure (D) Avoiding the mixing of water with radioactive sodium, as it may cause explosion

Last Answer : (D) Avoiding the mixing of water with radioactive sodium, as it may cause explosion

Which of the following is the most widely used insulating material for steam carrying pipelines? (A) Ceramic fibre blanket (B) Glass wool and 85% magnesia (C) Vermiculite (D) Slag wool

Description : Which of the following is the most widely used insulating material for steam carrying pipelines? (A) Ceramic fibre blanket (B) Glass wool and 85% magnesia (C) Vermiculite (D) Slag wool

Last Answer : (B) Glass wool and 85% magnesia

Steam traps are provided in steam carrying pipelines to (A) Condense steam (B) Release excess steam pressure by bleeding steam (C) Remove condensate and inert gases (D) None of these

Description : Steam traps are provided in steam carrying pipelines to (A) Condense steam (B) Release excess steam pressure by bleeding steam (C) Remove condensate and inert gases (D) None of these

Last Answer : (C) Remove condensate and inert gases

Which of the following is the most widely used heat insulating material for pipelines carrying steam? (A) Tar dolomite bricks followed by asbestos (B) Fireclay refractory followed by aluminium sheet (C) Cotton followed by aluminium foil (D) 85% magnesia cement and glass wool

Description : Which of the following is the most widely used heat insulating material for pipelines carrying steam? (A) Tar dolomite bricks followed by asbestos (B) Fireclay refractory followed by aluminium sheet (C) Cotton followed by aluminium foil (D) 85% magnesia cement and glass wool

Last Answer : (D) 85% magnesia cement and glass wool

A steam carrying pipeline is insulated with two layers of insulating materials with the inferior insulation material forming the inner part. If the two insulating layers are interchanged, the heat conducted will (A) Increase (B) Decrease (C) Remain unaffected (D) May increase or decrease; depends on the thickness of each layer

Description : A steam carrying pipeline is insulated with two layers of insulating materials with the inferior insulation material forming the inner part. If the two insulating layers are interchanged, the heat conducted ... ) Remain unaffected (D) May increase or decrease; depends on the thickness of each layer

Last Answer : Option C

The efficiency of superheat Rankine cycle is higher than that of simple Rankine cycle because [GATE-2002] (a) The enthalpy of main steam is higher for superheat cycle (b) The mean temperature of heat addition is higher for superheat cycle (c) The temperature of steam in the condenser is high (d) The quality of stem in the condenser is low

Description : The efficiency of superheat Rankine cycle is higher than that of simple Rankine cycle because [GATE-2002] (a) The enthalpy of main steam is higher for superheat cycle (b) The mean temperature of heat ... temperature of steam in the condenser is high (d) The quality of stem in the condenser is low 

Last Answer :  (b) The mean temperature of heat addition is higher for superheat cycle  

__________ joint is usually used for joining cast iron pipes mostly used for temporary pipelines, where it may be necessary to dismantle & reassemble the pipeline very frequently. (A) Collar (B) Flanged (C) Bell and Spigot (D) Expansion

Description : __________ joint is usually used for joining cast iron pipes mostly used for temporary pipelines, where it may be necessary to dismantle & reassemble the pipeline very frequently. (A) Collar (B) Flanged (C) Bell and Spigot (D) Expansion

Last Answer : Option B

Describe the importance of pipelines in India. Name three important networks of pipeline transportation in the country. -SST 10th

Description : Describe the importance of pipelines in India. Name three important networks of pipeline transportation in the country. -SST 10th

Last Answer : Pipeline transport network is a new arrival on the transportation map of India.Earlier it was used to transport water but these days it is used for the following: (i) Transport of crude oil, ... Vijaipur in MP. It has branches to Kota in Rajasthan, Shahajahanpur, Babrala and other places in UP.

One kilogram of water at 0°C is changed to superheated steam of one atm pressure and 300° C. The major heat consumption in the process will be to (A) Heat the water from 0°C to 100°C (B) Evaporate the water (C) To superheat the steam (D) Data insufficient, can't be predicted

Description : One kilogram of water at 0°C is changed to superheated steam of one atm pressure and 300° C. The major heat consumption in the process will be to (A) Heat the water from 0°C to 100°C (B) Evaporate the water (C) To superheat the steam (D) Data insufficient, can't be predicted

Last Answer : (B) Evaporate the water

Which one among the following is not a reason for practising tank irrigation in the Peninsular India? [NDA 2011] (a) The undulating relief and hard rocks (b) little percolation of rain water due to impervious rock structure (c) Most of the rivers of Peninsular India are perennial (d) There are many streams which become torrential during rainy season

Description : Which one among the following is not a reason for practising tank irrigation in the Peninsular India? [NDA 2011] (a) The undulating relief and hard rocks (b) little percolation of rain ... of Peninsular India are perennial (d) There are many streams which become torrential during rainy season

Last Answer : Ans: (c)

Steam is throttled to 0.1 MPa with 20 degrees of superheat. (a) What is the quality of throttled steam if its pressure is 0.75 MPa (b) What is the enthalpy of the process?  a) 97.6%,2713 kJ/kg  b) -97.6%, 2713 kJ/kg  c) 87.6%,3713 kJ/kg  d) -87.6%, 3713 kJ/kg

Description : Steam is throttled to 0.1 MPa with 20 degrees of superheat. (a) What is the quality of throttled steam if its pressure is 0.75 MPa (b) What is the enthalpy of the process?  a) 97.6%,2713 kJ/kg  b) -97.6%, 2713 kJ/kg  c) 87.6%,3713 kJ/kg  d) -87.6%, 3713 kJ/kg

Last Answer : 97.6%,2713 kJ/kg

Identification of pipelines carrying different liquids and gases is done by the __________ of the pipe(A) Diameter(B) Colour(C) Altitude(D) None of these.

Description : Identification of pipelines carrying different liquids and gases is done by the __________ of the pipe. (A) Diameter (B) Colour (C) Altitude (D) None of these

Last Answer : (B) Colour

Surge tanks are used (A) For storage water (B) To increase the velocity in a pipeline (C) As overflow valves (D) To guard against water hammer

Description : Surge tanks are used  (A) For storage water  (B) To increase the velocity in a pipeline  (C) As overflow valves  (D) To guard against water hammer 

Last Answer : (D) To guard against water hammer 

What are some common causes of gas pipeline vibration 20 Carbon Steel line?

Description : What are some common causes of gas pipeline vibration 20 Carbon Steel line?

Last Answer : ► The upper pressure range and /or the smaller pipe diameters prompts me to investigate the possibility that the gas is reaching critical flow somewhere downstream within the pipe. When a gas ... design, if we suspect two-phase flow, we instruct the piping designers to provide special anchoring

Define i)Dryness fraction ii) Degree of superheat

Description : Define i)Dryness fraction ii) Degree of superheat

Last Answer : i)Dryness fraction: Dryness fraction is defined ratio of the mass of the dry steam present in the total mass of steam.  Or  Dryness fraction is ratio of the mass of actual dry ... Superheated Steam and the saturation temperature correspondingly to given pressure is said to be Degree of Superheat. 

Define dry ness fraction and degree of superheat.

Description : Define dry ness fraction and degree of superheat. 

Last Answer : Dryness fraction: It is defined as a fraction of dry steam that is present in a liquid vapour is called dryness fraction. Or  Dryness fraction is the ratio of the Mass of actual dry ... the temperature of superheated steam and saturated steam (Tsup - Tsat) is known as degree of superheat.

Frontal Rain is caused by – (1) Convection current (2) Winds from sea (3) Cyclonic activity (4) Condensation of water evaporated from mountains

Description : Frontal Rain is caused by – (1) Convection current (2) Winds from sea (3) Cyclonic activity (4) Condensation of water evaporated from mountains

Last Answer : (3) Cyclonic activity Explanation: Frontal rainfall is a type of precipitation which occurs when a warm air mass and a cold air mass meet. Extra-tropical cyclones form as waves along ... is the development or strengthening of cyclonic circulation in the atmosphere (a low pressure area).

Frontal Rain is caused by (1) Convection current (2) Winds from sea (3) Cyclonic activity (4) Condensation of water evaporated from mountains

Description : Frontal Rain is caused by (1) Convection current (2) Winds from sea (3) Cyclonic activity (4) Condensation of water evaporated from mountains

Last Answer : Cyclonic activity

. In case of a hammer crusher, the (A) Feed may be highly abrasive (Moh's scale >5) (B) Minimum product size is 3 mm (C) Maximum feed size may be 50 mm (D) Rotor shaft carrying hammers can be vertical or horizontal

Description : . In case of a hammer crusher, the (A) Feed may be highly abrasive (Moh's scale >5) (B) Minimum product size is 3 mm (C) Maximum feed size may be 50 mm (D) Rotor shaft carrying hammers can be vertical or horizontal

Last Answer : (D) Rotor shaft carrying hammers can be vertical or horizontal

Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is important in problems involving gas absorption without chemical reaction (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion (D) Total reflux in case of distillation operation requires infinite number of plates for a binary system separation

Description : Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is ... reflux in case of distillation operation requires infinite number of plates for a binary system separation

Last Answer : (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion

Condensation of a vapour-gas mixture just begins, when (where, p = partial pressure of the vapour P = vapour pressure of the liquid). (A) p = P (B) p >>P (C) p < P (D) p << P

Description : Condensation of a vapour-gas mixture just begins, when (where, p = partial pressure of the vapour P = vapour pressure of the liquid). (A) p = P (B) p >>P (C) p < P (D) p

Last Answer : (A) p = P

Condensing film co-efficient for steam on horizontal tubes ranges from 5000 to 15000 Kcal/hr.m2 .°C. Condensation of vapor is carried out inside the tube in a shell and tube heat exchanger, when the (A) Higher condensing film co-efficient is desired (B) Condensate is corrosive in nature (C) Lower pressure drop through the exchanger is desired (D) Temperature of the incoming vapor is very high Answer: Option B

Description : Condensing film co-efficient for steam on horizontal tubes ranges from 5000 to 15000 Kcal/hr.m2 .°C. Condensation of vapor is carried out inside the tube in a shell and tube heat ... drop through the exchanger is desired (D) Temperature of the incoming vapor is very high

Last Answer : (B) Supersaturated

A pile is being driven with a drop hammer weighing 1800 kg and having a free fall of 1.00 m. If the penetration with last blow is 5 mm, the load carrying capacity of the pile, -according to the Engineering News formula, is (A) 100 tonnes (B) 50 tonnes (C) 20 tonnes (D) 10 tonnes

Description : A pile is being driven with a drop hammer weighing 1800 kg and having a free fall of 1.00 m. If the penetration with last blow is 5 mm, the load carrying capacity of the pile, -according to the Engineering News formula, is (A) 100 tonnes (B) 50 tonnes (C) 20 tonnes (D) 10 tonnes

Last Answer : (D) 10 tonnes

If the depth of water in an open channel is greater than the critical depth, the flow is called (A) Critical flow (B) Turbulent flow (C) Tranquil flow (D) Torrential flow

Description : If the depth of water in an open channel is greater than the critical depth, the flow is called (A) Critical flow (B) Turbulent flow (C) Tranquil flow (D) Torrential flow

Last Answer : Answer: Option C

If the depth of water in an open channel is less than the critical depth, the flow is called (A) Critical flow (B) Turbulent flow (C) Tranquil flow (D) Torrential flow

Description : If the depth of water in an open channel is less than the critical depth, the flow is called (A) Critical flow (B) Turbulent flow (C) Tranquil flow (D) Torrential flow

Last Answer : Answer: Option D

Pitch (a product of coal tar distillation) is always mixed with creosote oil, when it is to be burnt in a burner, because (A) Its calorific value is very less (B) Tar neutralises the residual acids present in pitch (C) It reduces viscosity and imparts fluidity for its transportation through pipelines at economic pressure drop (D) All (A), (B) and (C)

Description : Pitch (a product of coal tar distillation) is always mixed with creosote oil, when it is to be burnt in a burner, because (A) Its calorific value is very less (B) Tar neutralises the residual acids ... for its transportation through pipelines at economic pressure drop (D) All (A), (B) and (C)

Last Answer : (C) It reduces viscosity and imparts fluidity for its transportation through pipelines at economic pressure drop

Tanks of the Deccan area are a. Snow-fed b. Perennial c. Constructed near alluvial plains d. Used when streams become torrential

Description : Tanks of the Deccan area are a. Snow-fed b. Perennial c. Constructed near alluvial plains d. Used when streams become torrential

Last Answer : d. Used when streams become torrential

12. The flow at critical depth in an open channel is called torrential flow. A) Yes B) No

Description : 12. The flow at critical depth in an open channel is called torrential flow. A) Yes B) No

Last Answer : B

What term is applied to dry stream channels with nearly vertical walls and flat bottoms which are characteristic of semi-arid regions. They may suddenly become filled with torrential waters after heavy rains. The term has a Spanish origin.

Description : What term is applied to dry stream channels with nearly vertical walls and flat bottoms which are characteristic of semi-arid regions. They may suddenly become filled with torrential waters after heavy rains. The term has a Spanish origin.

Last Answer : ANSWER: ARROYO

In a co-current double pipe heat exchanger used for condensing saturated steam over the inner tube, if the entrance and exit conditions of the coolant are interchanged, then the rate of condensation will (A) Increase (B) Decrease (C) Remain unchanged (D) Either increase or decrease; depends on the coolant flow rate

Description : In a co-current double pipe heat exchanger used for condensing saturated steam over the inner tube, if the entrance and exit conditions of the coolant are interchanged, then the rate of condensation ... Decrease (C) Remain unchanged (D) Either increase or decrease; depends on the coolant flow rate

Last Answer : (C) Remain unchanged

Piles are usually driven by (A) Diesel operated hammer (B) Drop hammer (C) Single acting steam hammer (D) All the above

Description : Piles are usually driven by (A) Diesel operated hammer (B) Drop hammer (C) Single acting steam hammer (D) All the above

Last Answer : Answer: Option D

In a gas-liquid shell and tube heat exchanger, the(A) Presence of a non-condensable gas decreases the condensing film co￾efficient (B) Gases under high pressure are routed through the tube side, because high pressure gases are corrosive in nature (C) Gases to be heated/cooled is normally routed through the shell side, because the corrosion caused by the cooling water or steam condensate remain localised to the tubes (D) All 'a', 'b' & 'c'

Description : In a gas-liquid shell and tube heat exchanger, the (A) Presence of a non-condensable gas decreases the condensing film co￾efficient (B) Gases under high pressure are routed through the tube side, because high pressure ... water or steam condensate remain localised to the tubes (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Water hammer is caused, when water flowing in a pipe is suddenly brought to rest by closing the valve. The extent of pressure thus produced due to water hammer depends on the (A) Pipe length (B) Fluid velocity in the pipe (C) Time taken to close the valve (D) All (A), (B) and (C)

Description : Water hammer is caused, when water flowing in a pipe is suddenly brought to rest by closing the valve. The extent of pressure thus produced due to water hammer depends on the (A) Pipe length (B) Fluid velocity in the pipe (C) Time taken to close the valve (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pipelines in cold countries often burst in winter, because – (1) Water freezes and expands in its volume (2) Temperature of ice is less than that of water (3) Pipelines contract in their volume (4) Pipelines expand due to freezing

Description : Pipelines in cold countries often burst in winter, because – (1) Water freezes and expands in its volume (2) Temperature of ice is less than that of water (3) Pipelines contract in their volume (4) Pipelines expand due to freezing

Last Answer : (1) Water freezes and expands in its volume Explanation: Water expands on freezing. When liquid water is cooled, it contracts like one would expect until a temperature of approximately 4 degrees ... it expands by approximately 9%. The fact that water expands upon freezing causes icebergs to float.

Pipelines in cold countries often burst in winter, because (1) water freezes and expands in its volume (2) temperature of ice is less than that of water (3) pipelines contract in their volume (4) pipelines expand due to freezing

Description : Pipelines in cold countries often burst in winter, because (1) water freezes and expands in its volume (2) temperature of ice is less than that of water (3) pipelines contract in their volume (4) pipelines expand due to freezing

Last Answer : water freezes and expands in its volume

Which of the following can be calculated theoretically using steam table and Dalton's law of partial pressure; if the relative humidity and dry bulb temperature of moist air is known? (A) Dew point (B) Humidity ratio (C) Wet bulb temperature (D) None of these

Description : Which of the following can be calculated theoretically using steam table and Dalton's law of partial pressure; if the relative humidity and dry bulb temperature of moist air is known? (A) Dew point (B) Humidity ratio (C) Wet bulb temperature (D) None of these

Last Answer : (C) Wet bulb temperature

Ammonia synthesis gas is produced from fuel oil by (A) Steam reforming (B) Hydro-cracking (C) Partial oxidation (D) Hydrogenation

Description : Ammonia synthesis gas is produced from fuel oil by (A) Steam reforming (B) Hydro-cracking (C) Partial oxidation (D) Hydrogenation

Last Answer : (C) Partial oxidation

Ammonia synthesis gas is produced from natural gas by (A) Thermal cracking (B) Steam reforming (C) Partial oxidation (D) Hydrogenation

Description : Ammonia synthesis gas is produced from natural gas by (A) Thermal cracking (B) Steam reforming (C) Partial oxidation (D) Hydrogenation

Last Answer : (B) Steam reforming

In steam and other vapour cycles, the process of removing noncondensable is called [GATE-1992] (a) Scavenging process (b) Deaeration process (c) Exhaust process (d) Condensation process

Description : In steam and other vapour cycles, the process of removing noncondensable is called [GATE-1992] (a) Scavenging process (b) Deaeration process (c) Exhaust process (d) Condensation process  

Last Answer : (b) Deaeration process  

What is the remedy for a bent steam turbine shaft causing excessive vibration?

Description : What is the remedy for a bent steam turbine shaft causing excessive vibration?

Last Answer : 1. The run-out of the shaft near the center as well as the shaft extension should be checked. 2. If the run-out is excessive, the shaft is to be replaced.

What are the possible causes of excessive vibration or noise in a steam turbine?

Description : What are the possible causes of excessive vibration or noise in a steam turbine?

Last Answer : 1. Misalignment. 2. Worn bearings. 3. Worn coupling to driven machine. 4. Unbalanced coupling to driven machine. 5. Unbalanced wheel. 6. Piping strain. 7. Bent shaft.

How can problems of "excessive vibration or noise" due to piping strain be avoided on steam turbines?

Description : How can problems of "excessive vibration or noise" due to piping strain be avoided on steam turbines?

Last Answer : 1. The inlet as well as exhaust steam lines should be firmly supported to avoid strains from being imposed on the turbine. 2. Adequate allowance should be made for expansion of steam pipes due to heat.

What does a low evaporator superheat indicate?

Description : What does a low evaporator superheat indicate?

Last Answer : Feel Free to Answer