For coarse reduction of hard solids, use (A) Impact (B) Attrition (C) Compression (D) Cutting

For coarse reduction of hard solids, use
(A) Impact
(B) Attrition
(C) Compression
(D) Cutting
by

1 Answer

Answer :

(C) Compression
by

Related questions

Pick out the wrong statement. (A) More commonly used jaw crusher between Dodge jaw crusher and Blake jaw crusher is the later one(B) There are only four methods namely compression, impact, attrition andcutting, which the size reduction equipments employ(C) Cutting machines mainly employ 'attrition' for size reduction of solids(D) Operating principles of Dodge and Blake jaw crushers are combined inthe working of universal jaw crushers

Description : Pick out the wrong statement. (A) More commonly used jaw crusher between Dodge jaw crusher and Blake jaw crusher is the later one (B) There are only four methods namely compression, impact ... Operating principles of Dodge and Blake jaw crushers are combined in the working of universal jaw crushers

Last Answer : (C) Cutting machines mainly employ 'attrition' for size reduction of solids

The main size reduction operation in ultrafine grinders is (A) Cutting (B) Attrition (C) Compression (D) Impact

Description : The main size reduction operation in ultrafine grinders is (A) Cutting (B) Attrition (C) Compression (D) Impact

Last Answer : (B) Attrition

Colloid mills achieve size reduction mainly by (A) Impact (B) Attrition (C) Cutting (D) Compression

Description : Colloid mills achieve size reduction mainly by (A) Impact (B) Attrition (C) Cutting (D) Compression

Last Answer : (B) Attrition

Maximum size reduction in a fluid energy mill is achieved by (A) Compression (B) Interparticle attrition (C) Cutting (D) Impact

Description : Maximum size reduction in a fluid energy mill is achieved by (A) Compression (B) Interparticle attrition (C) Cutting (D) Impact

Last Answer : (B) Interparticle attrition

Maximum size reduction in a ball mill is done by the, __________ action. (A) Attrition (B) Compression (C) Impact (D) Cutting

Description : Maximum size reduction in a ball mill is done by the, __________ action. (A) Attrition (B) Compression (C) Impact (D) Cutting

Last Answer : (C) Impact

General mechanism of size reduction in intermediate and fine grinder is by (A) Cutting action (B) Compression (C) Compression and tearing (D) Impact and attrition

Description : General mechanism of size reduction in intermediate and fine grinder is by (A) Cutting action (B) Compression (C) Compression and tearing (D) Impact and attrition

Last Answer : (D) Impact and attrition

The material is crushed in a gyratory crusher by the action of (A) Impact (B) Compression (C) Attrition (D) Cutting

Description : The material is crushed in a gyratory crusher by the action of (A) Impact (B) Compression (C) Attrition (D) Cutting

Last Answer : (B) Compression

Ultrafine grinders operate principally by (A) Slow compression (B) Impact (C) Attrition (D) Cutting action

Description : Ultrafine grinders operate principally by (A) Slow compression (B) Impact (C) Attrition (D) Cutting action

Last Answer : (C) Attrition

Toothed roll crushers achieve size reduction by (A) Tearing (shear) and compression (B) Impact and attrition (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Toothed roll crushers achieve size reduction by (A) Tearing (shear) and compression (B) Impact and attrition (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Soft & non-abrasive materials can be made into fines by (A) Attrition (B) Compression (C) Cutting (D) None of these

Description : Soft & non-abrasive materials can be made into fines by (A) Attrition (B) Compression (C) Cutting (D) None of these

Last Answer : (A) Attrition

Size reduction mechanism used in Jaw crushers is (A) Attrition (B) Compression

Description : Size reduction mechanism used in Jaw crushers is (A) Attrition (B) Compression

Last Answer : (B) Compression

The mechanism of size reduction by a hammer mill is by impact and attrition between the (A) Grinding element & the housing (B) Feed particles (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The mechanism of size reduction by a hammer mill is by impact and attrition between the (A) Grinding element & the housing (B) Feed particles (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Pick out the wrong statement. (A) Recycled coarse material to the grinder by a classifier is termed as circulating load (B) Wear and tear in wet crushing is more than that in dry crushing of materials (C) Size enlargement (opposite of size reduction) is not a mechanical operation (D) A 'dust catcher' is simply an enlargement in a pipeline which permits the solids to settle down due to reduction in velocity of the dust laden gas

Description : Pick out the wrong statement. (A) Recycled coarse material to the grinder by a classifier is termed as circulating load (B) Wear and tear in wet crushing is more than that in dry crushing of ... a pipeline which permits the solids to settle down due to reduction in velocity of the dust laden gas

Last Answer : (C) Size enlargement (opposite of size reduction) is not a mechanical operation

Ball mill is used for (A) Crushing (B) Coarse grinding (C) Fine grinding (D) Attrition

Description : Ball mill is used for (A) Crushing (B) Coarse grinding (C) Fine grinding (D) Attrition

Last Answer : (C) Fine grinding

Which of the following size reduction equipments employs mainly attrition for ultrafine grinding? (A) Jet mills (B) Fluid energy mill (C) Micronizer (D) All (A), (B) and (C)

Description : Which of the following size reduction equipments employs mainly attrition for ultrafine grinding? (A) Jet mills (B) Fluid energy mill (C) Micronizer (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Alloy powder manufactured by the following process have spherical shapes. (A) Electrochemical deposition (B) Gaseous reduction (C) Atomisation (D) Mechanical attrition

Description : Alloy powder manufactured by the following process have spherical shapes. (A) Electrochemical deposition (B) Gaseous reduction (C) Atomisation (D) Mechanical attrition

Last Answer : (C) Atomisation

The grinding in a hammer crusher takes place due to the (A) Attrition (B) Impact (C) Both (A) & (B) (D) Neither (A) nor (B

Description : The grinding in a hammer crusher takes place due to the (A) Attrition (B) Impact (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

Grizzlies are used for separating __________ solids. (A) Coarse (B) Fine (C) Any size (D) None of these

Description : Grizzlies are used for separating __________ solids. (A) Coarse (B) Fine (C) Any size (D) None of these

Last Answer : (B) Fine

Pick out the wrong statement pertaining to leaching. (A) Fine solids cannot be leached in a Pachuca tank (B) Door classifier can be used for leaching of coarse solids (C) Vegetable seeds can be leached in either of Bollman extractor, Rotocel or Kennedy extractor (D) Very high temperature is not needed for the leaching of sugar beet

Description : Pick out the wrong statement pertaining to leaching. (A) Fine solids cannot be leached in a Pachuca tank (B) Door classifier can be used for leaching of coarse solids (C) Vegetable seeds can be ... , Rotocel or Kennedy extractor (D) Very high temperature is not needed for the leaching of sugar beet

Last Answer : (A) Fine solids cannot be leached in a Pachuca tank

A patient has improperly formed DEJ, reduction in size of pulp chamber, chipping and attrition of enamel that would MOSTLY be: A. Fluorosis B. Amelogenesis imperfecta C. Dentinogenesis imperfecta

Description : A patient has improperly formed DEJ, reduction in size of pulp chamber, chipping and attrition of enamel that would MOSTLY be: A. Fluorosis B. Amelogenesis imperfecta C. Dentinogenesis imperfecta

Last Answer : C. Dentinogenesis imperfecta

Los Angeles testing machine is used to conduct (A) Abrasion test (B) Impact test (C) Attrition test (D) Crushing strength test

Description : Los Angeles testing machine is used to conduct (A) Abrasion test (B) Impact test (C) Attrition test (D) Crushing strength test

Last Answer : Answer: Option A

Explain the working, advantages and disadvantages of any one mill based on the principle of combined impact and attrition?

Description : Explain the working, advantages and disadvantages of any one mill based on the principle of combined impact and attrition?

Last Answer : which of the following mill works on the principle of combined impact and attrition

Pick out the wrong statement: (A) Magnetic separation method can be employed to treat both dry & wet ores (B) Reduction ratio in crushing operation is defined as the ratio of minimum feed size to the maximum product size (C) Gyratory crusher is used for coarse crushing (D) Screens are of stationary, moving and vibratory types

Description : Pick out the wrong statement: (A) Magnetic separation method can be employed to treat both dry & wet ores (B) Reduction ratio in crushing operation is defined as the ratio of minimum feed ... ) Gyratory crusher is used for coarse crushing (D) Screens are of stationary, moving and vibratory types

Last Answer : (B) Reduction ratio in crushing operation is defined as the ratio of minimum feed size to the maximum product size

Pick up the correct statement from the following: (A) Plain cement concrete is equally strong in compression as well as in tension (B) Slump test is performed to check concrete strength (C) Curing of concrete is done for proper compaction of cement (D) Fineness modulus is the index number expressing the relative sizes of both coarse and fine aggregates

Description : Pick up the correct statement from the following: (A) Plain cement concrete is equally strong in compression as well as in tension (B) Slump test is performed to check concrete strength (C ... D) Fineness modulus is the index number expressing the relative sizes of both coarse and fine aggregates

Last Answer : Option D

For crushing of solids, the Rittinger's law states that the work required for crushing is proportional to(A) The new surface created(B) The size reduction ratio(C) The change in volume due to crushing(D) None of these

Description : For crushing of solids, the Rittinger's law states that the work required for crushing is proportional to (A) The new surface created (B) The size reduction ratio (C) The change in volume due to crushing (D) None of these

Last Answer : (A) The new surface created

Foaming and priming in boiler operation can be reduced by reduction in __________ in feed water. (A) Turbidity (B) Color (Hazen) (C) Total solids (D) All (A), (B) & (C)

Description : Foaming and priming in boiler operation can be reduced by reduction in __________ in feed water. (A) Turbidity (B) Color (Hazen) (C) Total solids (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Size reduction does not occur due to compression in case of (A) Rod mills (B) Gyratory crushers (C) Jaw crushers (D) Smooth roll crushers

Description : Size reduction does not occur due to compression in case of (A) Rod mills (B) Gyratory crushers (C) Jaw crushers (D) Smooth roll crushers

Last Answer : (A) Rod mills

Which of the following terminology is not used for size reduction of materials to fine sizes or powders? (A) Comminution (B) Dispersion (C) Pulverisation (D) Compression

Description : Which of the following terminology is not used for size reduction of materials to fine sizes or powders? (A) Comminution (B) Dispersion (C) Pulverisation (D) Compression

Last Answer : (D) Compression

__________ mill is not used for grinding wheat into flour and for milling of cereals & other vegetable products. (A) Buhrstone (B) Roller (C) Attrition (D) Pebble

Description : __________ mill is not used for grinding wheat into flour and for milling of cereals & other vegetable products. (A) Buhrstone (B) Roller (C) Attrition (D) Pebble

Last Answer : (D) Pebble

The least bearing capacity of soil is that of (A) Hard rock (B) Moist clay (C) Soft rock (D) Coarse sandy soil

Description : The least bearing capacity of soil is that of (A) Hard rock (B) Moist clay (C) Soft rock (D) Coarse sandy soil

Last Answer : Answer: Option B

The maximum bearing capacity of soil is that of (A) Black cotton soil (B) Loose fine sandy soil (C) Dry coarse sandy soil (D) Hard rocks

Description : The maximum bearing capacity of soil is that of (A) Black cotton soil (B) Loose fine sandy soil (C) Dry coarse sandy soil (D) Hard rocks

Last Answer : Answer: Option D

In case of a hammer crusher, (A) Crushing takes place by impact breaking (B) Maximum acceptable feed size is 30 cms (C) Reduction ratio can be varied by adjusting the distance from cage to hammers (D) All (A), (B) and (C)

Description : In case of a hammer crusher, (A) Crushing takes place by impact breaking (B) Maximum acceptable feed size is 30 cms (C) Reduction ratio can be varied by adjusting the distance from cage to hammers (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Post augmentation or reduction mammaplasty, what is the best compression garment to ensure comfort & helps shape the breast?

Description : Post augmentation or reduction mammaplasty, what is the best compression garment to ensure comfort & helps shape the breast?

Last Answer : lipomed bra from the house of PMIPL, leading & exclusive importer and distributor of world class compressio garments offers a firm support post augmentation and reduction mammoplasty. The elsatic fabric offers a pleasant feel on the skin and ensures optimum comfort

The reduction in volume of soil due to squeezing out of water from the voids, is termed (A) Primary consolidation (B) Primary compression (C) Primary time effect (D) All the above

Description : The reduction in volume of soil due to squeezing out of water from the voids, is termed (A) Primary consolidation (B) Primary compression (C) Primary time effect (D) All the above

Last Answer : Answer: Option D

By using data compression technique, what can be done in the data storage place of memory and disk ? a) increment b) Reduction c) Transfer d) Repetition

Description : By using data compression technique, what can be done in the data storage place of memory and disk ? a) increment b) Reduction c) Transfer d) Repetition

Last Answer : b) Reduction

Processing of a data file to reduce its size for storage on disk is termed : (1) Amplification (2) Reduction (3) Compression (4) Rarefaction

Description : Processing of a data file to reduce its size for storage on disk is termed : (1) Amplification (2) Reduction (3) Compression (4) Rarefaction

Last Answer : Compression

The formation of 'Mushroom rock' in desert region is an example of – (1) Deflation (2) Attrition (3) Abrasion (4) Erosion

Description : The formation of 'Mushroom rock' in desert region is an example of – (1) Deflation (2) Attrition (3) Abrasion (4) Erosion

Last Answer : (3) Abrasion Explanation: The rocks having broad upper part and narrow base resembling an umbrella or mushroom are called mushroom rocks or pedestal rocks. These undercut, mushroomshaped rocks are formed due to abrasive works of wind.

Time period that is considered from the inception of the credit, investment or negotiable instrument and ends upon the maturity or expiry of the instrument is referred as ________ A. Amortisation Period B. Amortising Swap C. Asset Backed Security D. Attrition Analysis

Description : Time period that is considered from the inception of the credit, investment or negotiable instrument and ends upon the maturity or expiry of the instrument is referred as ________ A. Amortisation Period B. Amortising Swap C. Asset Backed Security D. Attrition Analysis

Last Answer : A. Amortisation Period Explanation: The amortisation period on a mortgage is the total length of time it will take you to pay off your mortgage.

Pick up the correct statement from the following: (A) Acid test is done to find out the weathering quality of stones (B) Attrition test is done to find out the rate of wear of stones which are used in road construction (C) Crushing test is done to find out the compressive strength of the stone (D) All the above

Description : Pick up the correct statement from the following: (A) Acid test is done to find out the weathering quality of stones (B) Attrition test is done to find out the rate of wear of stones which are used ... (C) Crushing test is done to find out the compressive strength of the stone (D) All the above

Last Answer : Answer: Option D

What is the process that tends to build up the land surface by deposition of solid material in its lower areas, known as? a. Abrasion b. Agglomeration c. Aggradation d. Attrition

Description : What is the process that tends to build up the land surface by deposition of solid material in its lower areas, known as? a. Abrasion b. Agglomeration c. Aggradation d. Attrition

Last Answer : c. Aggradation

Generalised loss of tooth structure by chemical means called, A. Erosion B. Attrition

Description : Generalised loss of tooth structure by chemical means called, A. Erosion B. Attrition

Last Answer : A. Erosion

Which of the following factors can affect the shape and size of the pulp canal: A. Chemical irritation and caries B. Trauma and function C. Attrition, wear and aging of the patient D. All of the above

Description : Which of the following factors can affect the shape and size of the pulp canal: A. Chemical irritation and caries B. Trauma and function C. Attrition, wear and aging of the patient D. All of the above

Last Answer : D. All of the above

Attrition is,v A. Process of normal wear of teeth B. Lost of teeth substance as a result of chemical exposure

Description : Attrition is,v A. Process of normal wear of teeth B. Lost of teeth substance as a result of chemical exposure

Last Answer : A. Process of normal wear of teeth

The posttest-only design with nonequivalent groups is likely to control for which of the following threats to internal validity: a. History b. Differential selection c. additive and interactive effects d. differential attrition

Description : The posttest-only design with nonequivalent groups is likely to control for which of the following threats to internal validity: a. History b. Differential selection c. additive and interactive effects d. differential attrition

Last Answer : a. History

The formation of ‘Mushroom rock’ in desert region is an example of (1) Deflation (2) Attrition (3) Abrasion (4) Erosion

Description : The formation of ‘Mushroom rock’ in desert region is an example of (1) Deflation (2) Attrition (3) Abrasion (4) Erosion

Last Answer : Abrasion

Cutting speed of the impact type cutter is a)10-20 m/s. b)20-40m/s c)40-50m/s. d)46-56m/s

Description : Cutting speed of the impact type cutter is a)10-20 m/s. b)20-40m/s c)40-50m/s. d)46-56m/s

Last Answer : b)20-40m/s

The design of the _____has a significant impact on the amount of compression. a. Cluster b. Quantizer c. Codebook d. Both (b) and (a)

Description : The design of the _____has a significant impact on the amount of compression. a. Cluster b. Quantizer c. Codebook d. Both (b) and (a)

Last Answer : b. Quantizer

Why are ionic solids hard and brittle?

Description : Why are ionic solids hard and brittle?

Last Answer : Ionic solids are brittle and hard as they are bonded with electrostatic bonds.

Why are ionic solids hard and brittle?

Description : Why are ionic solids hard and brittle?

Last Answer : Ionic solids are brittle and hard as they are bonded with electrostatic bonds.

Pick out the wrong statement pertaining to the roll crushers. (A) Maximum feed size determines the required roll diameter (B) For hard material's crushing, the reduction ratio should not exceed 4 (C) Both the rolls run necessarily at the same speed (D) Reduction ratio and differential roll speed affect production rate & energy consumed per unit of surface produced

Description : Pick out the wrong statement pertaining to the roll crushers. (A) Maximum feed size determines the required roll diameter (B) For hard material's crushing, the reduction ratio should not ... ratio and differential roll speed affect production rate & energy consumed per unit of surface produced

Last Answer : (C) Both the rolls run necessarily at the same speed