Alloy powder manufactured by the following process have spherical shapes. (A) Electrochemical deposition (B) Gaseous reduction (C) Atomisation (D) Mechanical attrition

Alloy powder manufactured by the following process have spherical shapes.
(A) Electrochemical deposition
(B) Gaseous reduction
(C) Atomisation
(D) Mechanical attrition
by

1 Answer

Answer :

(C) Atomisation
by

Related questions

Powder metallurgy process does not make metal powder by (A) Atomisation (B) Grinding/milling (C) Hammering (D) Electrolytic deposition

Description : Powder metallurgy process does not make metal powder by (A) Atomisation (B) Grinding/milling (C) Hammering (D) Electrolytic deposition

Last Answer : Option C

What is the process that tends to build up the land surface by deposition of solid material in its lower areas, known as? a. Abrasion b. Agglomeration c. Aggradation d. Attrition

Description : What is the process that tends to build up the land surface by deposition of solid material in its lower areas, known as? a. Abrasion b. Agglomeration c. Aggradation d. Attrition

Last Answer : c. Aggradation

Electrochemical corrosion can occur, only if __________ is present in contact with metal. (A) Air (B) Oxygen (C) Liquid medium (D) Gaseous medium

Description : Electrochemical corrosion can occur, only if __________ is present in contact with metal. (A) Air (B) Oxygen (C) Liquid medium (D) Gaseous medium

Last Answer : (C) Liquid medium

The main size reduction operation in ultrafine grinders is (A) Cutting (B) Attrition (C) Compression (D) Impact

Description : The main size reduction operation in ultrafine grinders is (A) Cutting (B) Attrition (C) Compression (D) Impact

Last Answer : (B) Attrition

Colloid mills achieve size reduction mainly by (A) Impact (B) Attrition (C) Cutting (D) Compression

Description : Colloid mills achieve size reduction mainly by (A) Impact (B) Attrition (C) Cutting (D) Compression

Last Answer : (B) Attrition

Size reduction mechanism used in Jaw crushers is (A) Attrition (B) Compression

Description : Size reduction mechanism used in Jaw crushers is (A) Attrition (B) Compression

Last Answer : (B) Compression

The mechanism of size reduction by a hammer mill is by impact and attrition between the (A) Grinding element & the housing (B) Feed particles (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The mechanism of size reduction by a hammer mill is by impact and attrition between the (A) Grinding element & the housing (B) Feed particles (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Maximum size reduction in a fluid energy mill is achieved by (A) Compression (B) Interparticle attrition (C) Cutting (D) Impact

Description : Maximum size reduction in a fluid energy mill is achieved by (A) Compression (B) Interparticle attrition (C) Cutting (D) Impact

Last Answer : (B) Interparticle attrition

For coarse reduction of hard solids, use (A) Impact (B) Attrition (C) Compression (D) Cutting

Description : For coarse reduction of hard solids, use (A) Impact (B) Attrition (C) Compression (D) Cutting

Last Answer : (C) Compression

Maximum size reduction in a ball mill is done by the, __________ action. (A) Attrition (B) Compression (C) Impact (D) Cutting

Description : Maximum size reduction in a ball mill is done by the, __________ action. (A) Attrition (B) Compression (C) Impact (D) Cutting

Last Answer : (C) Impact

Which of the following size reduction equipments employs mainly attrition for ultrafine grinding? (A) Jet mills (B) Fluid energy mill (C) Micronizer (D) All (A), (B) and (C)

Description : Which of the following size reduction equipments employs mainly attrition for ultrafine grinding? (A) Jet mills (B) Fluid energy mill (C) Micronizer (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

General mechanism of size reduction in intermediate and fine grinder is by (A) Cutting action (B) Compression (C) Compression and tearing (D) Impact and attrition

Description : General mechanism of size reduction in intermediate and fine grinder is by (A) Cutting action (B) Compression (C) Compression and tearing (D) Impact and attrition

Last Answer : (D) Impact and attrition

Pick out the wrong statement. (A) More commonly used jaw crusher between Dodge jaw crusher and Blake jaw crusher is the later one(B) There are only four methods namely compression, impact, attrition andcutting, which the size reduction equipments employ(C) Cutting machines mainly employ 'attrition' for size reduction of solids(D) Operating principles of Dodge and Blake jaw crushers are combined inthe working of universal jaw crushers

Description : Pick out the wrong statement. (A) More commonly used jaw crusher between Dodge jaw crusher and Blake jaw crusher is the later one (B) There are only four methods namely compression, impact ... Operating principles of Dodge and Blake jaw crushers are combined in the working of universal jaw crushers

Last Answer : (C) Cutting machines mainly employ 'attrition' for size reduction of solids

Toothed roll crushers achieve size reduction by (A) Tearing (shear) and compression (B) Impact and attrition (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Toothed roll crushers achieve size reduction by (A) Tearing (shear) and compression (B) Impact and attrition (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Cast iron (A) Is obtained by purifying pig iron (B) Is manufactured in required shapes (C) May contain 2 to 5 per cent of carbon with other impurities (D) All the above

Description : Cast iron (A) Is obtained by purifying pig iron (B) Is manufactured in required shapes (C) May contain 2 to 5 per cent of carbon with other impurities (D) All the above

Last Answer : Answer: Option D

Tin coating on metals is not done by (A) Spraying (B) Powder metallurgy (C) Hot dipping (D) Electro-deposition

Description : Tin coating on metals is not done by (A) Spraying (B) Powder metallurgy (C) Hot dipping (D) Electro-deposition

Last Answer : (B) Powder metallurgy

A patient has improperly formed DEJ, reduction in size of pulp chamber, chipping and attrition of enamel that would MOSTLY be: A. Fluorosis B. Amelogenesis imperfecta C. Dentinogenesis imperfecta

Description : A patient has improperly formed DEJ, reduction in size of pulp chamber, chipping and attrition of enamel that would MOSTLY be: A. Fluorosis B. Amelogenesis imperfecta C. Dentinogenesis imperfecta

Last Answer : C. Dentinogenesis imperfecta

(3) made cathode and a pure nickel red, the anode Explanation: Electroplating is the deposition by electrolysis of a coating of metal upon a conducting surface. The simplest system makes the object to be plated the negative electrode (cathode) or plate in a galvanic couple. Thus a spoon or other object may be connected by a wire to a plate of nickel. The process that occurs on the spoon is called reduction and, therefore, the spoon is also referred to as a cathode.

Description : (3) made cathode and a pure nickel red, the anode Explanation: Electroplating is the deposition by electrolysis of a coating of metal upon a conducting surface. The simplest system makes the object to be ... on the spoon is called reduction and, therefore, the spoon is also referred to as a cathode.

Last Answer : Which of the following is not a method of preparing oxygen? (1) Electrolysis of water (2) Fractional distillation of liquid air (3) Decomposition of potassium permanganate (4) Decomposition of manganese dioxide

Which of the following can be manufactured using powder metallurgy techniques? (A) Brake linings (B) Bearings (C) Carbide tool tips (D) All 'a', 'b' and 'c'

Description : Which of the following can be manufactured using powder metallurgy techniques? (A) Brake linings (B) Bearings (C) Carbide tool tips (D) All 'a', 'b' and 'c'

Last Answer : (D) All 'a', 'b' and 'c'

Carbide tipped cutting tools are manufactured by powder metallurgy techniques and have a composition of (A) 90% tungsten carbide and 10% cobalt (B) 70% aluminium oxide & 30% silica (C) 30% nickel, 15% chromium & 55% tungsten (D) 65% tungsten & 35% zirconium

Description : Carbide tipped cutting tools are manufactured by powder metallurgy techniques and have a composition of (A) 90% tungsten carbide and 10% cobalt (B) 70% aluminium oxide & 30% silica (C) 30% nickel, 15% chromium & 55% tungsten (D) 65% tungsten & 35% zirconium

Last Answer : Option A

Which of the following is not Powder-Based RP system? a.Selective Laser Sintering (SLS) b.Solid Object Ultraviolet-Laser Printer (SOUP) c.Electron Beam Melting (EBM) d.Direct Metal Deposition (DMD)

Description : Which of the following is not Powder-Based RP system? a.Selective Laser Sintering (SLS) b.Solid Object Ultraviolet-Laser Printer (SOUP) c.Electron Beam Melting (EBM) d.Direct Metal Deposition (DMD)

Last Answer : b.Solid Object Ultraviolet-Laser Printer (SOUP)

H2S present in gaseous stream can be removed by adsorption on (A) Silica gel (B) Active carbon (C) Bog iron (D) Limestone powder

Description : H2S present in gaseous stream can be removed by adsorption on (A) Silica gel (B) Active carbon (C) Bog iron (D) Limestone powder

Last Answer : (C) Bog iron

Shampoos are commercially not available in the form of (A) Powder (B) Gaseous mixture (C) Solution (D) Emulsion

Description : Shampoos are commercially not available in the form of (A) Powder (B) Gaseous mixture (C) Solution (D) Emulsion

Last Answer : Option B

For preparation of porous bearings by powder metallurgy, preferred particle shape is (A) Spherical (B) Nodular (C) Irregular (D) No preferred shape

Description : For preparation of porous bearings by powder metallurgy, preferred particle shape is (A) Spherical (B) Nodular (C) Irregular (D) No preferred shape

Last Answer : (A) Spherical

Liquid hydrocarbons are converted to low molecular weight gaseous hydrocarbons by a process known as (a) hydrogenation (b) reforming (c) cracking (d) reduction

Description : Liquid hydrocarbons are converted to low molecular weight gaseous hydrocarbons by a process known as (a) hydrogenation (b) reforming (c) cracking (d) reduction

Last Answer : Ans:(c)

When coal is strongly heated continuously for 42 to 48 hours in the absence of air in a closed vessel, the process is known as __________ of fuel.  A. atomisation  B. carbonisation

Description : When coal is strongly heated continuously for 42 to 48 hours in the absence of air in a closed vessel, the process is known as __________ of fuel.  A. atomisation  B. carbonisation

Last Answer : Answer: B

The contraction (Gaseous) porosity in inlays is related to:** A. Overheating of the alloy B. Molten gases C. Diameter of the sprue D. Overheating of investment

Description : The contraction (Gaseous) porosity in inlays is related to:** A. Overheating of the alloy B. Molten gases C. Diameter of the sprue D. Overheating of investment

Last Answer : B. Molten gases

Which of the following processes is responsible for producing the sand dunes in western Rajasthan? (1) Wind erosion (2) Erosion by water (3) Wind deposition (4) Mechanical weathering

Description : Which of the following processes is responsible for producing the sand dunes in western Rajasthan? (1) Wind erosion (2) Erosion by water (3) Wind deposition (4) Mechanical weathering

Last Answer : (3) Wind deposition Explanation: In physical geography, a dune is a hill of sand built either by wind or water flow. Dunes occur in different forms and sizes, formed by interaction with the flow ... the sand grains: and (3) a topography whereby the sand particles lose their momentum and settle out.

Identify the incorrect statement. (a) Heartwood does not conduct water but gives mechanical support. (b) Sapwood is involved in conduction of water and minerals from root to leaf. (c) Sapwood is the innermost secondary xylem and is lighter in colour. (d) Due to deposition of tannins, resins, oils, etc., heartwood is dark in colour.

Description : Identify the incorrect statement. (a) Heartwood does not conduct water but gives mechanical support. (b) Sapwood is involved in conduction of water and minerals from root to leaf. (c) Sapwood is the innermost ... . (d) Due to deposition of tannins, resins, oils, etc., heartwood is dark in colour.

Last Answer : (c) Sapwood is the innermost secondary xylem and is lighter in colour

Which of the following processes is responsible for producing the sand dunes in western Rajasthan ? (1) Wind erosion (2) Erosion by water (3) Wind deposition (4) Mechanical weathering

Description : Which of the following processes is responsible for producing the sand dunes in western Rajasthan ? (1) Wind erosion (2) Erosion by water (3) Wind deposition (4) Mechanical weathering

Last Answer : Wind deposition

Specific gravity of a petroleum product gives an indication of its (A) Degree of refinement (B) Hydrocarbon content type (aromatic or paraffinic) (C) Ease of atomisation (D) Sulphur content

Description : Specific gravity of a petroleum product gives an indication of its (A) Degree of refinement (B) Hydrocarbon content type (aromatic or paraffinic) (C) Ease of atomisation (D) Sulphur content

Last Answer : (B) Hydrocarbon content type (aromatic or paraffinic)

Maximum viscosity of tar/PCM/fuel oil for easy and efficient atomisation in conventional burner is __________ centistokes (or 100 Redwood I seconds). (A) 5 (B) 25 (C) 50 (D) 100

Description : Maximum viscosity of tar/PCM/fuel oil for easy and efficient atomisation in conventional burner is __________ centistokes (or 100 Redwood I seconds). (A) 5 (B) 25 (C) 50 (D) 100

Last Answer : (B) 25

Preheating temperature of medium viscosity furnace oil for better atomisation through burner is about __________ °C. (A) 50 (B) 70 (C) 90 (D) 140

Description : Preheating temperature of medium viscosity furnace oil for better atomisation through burner is about __________ °C. (A) 50 (B) 70 (C) 90 (D) 140

Last Answer : (C) 90

Which of the following does not require preheating during storage in the storage tank as well as during atomisation through burners? (A) PCM (B) Tar (C) Light diesel oil (D) Low viscosity furnace oil

Description : Which of the following does not require preheating during storage in the storage tank as well as during atomisation through burners? (A) PCM (B) Tar (C) Light diesel oil (D) Low viscosity furnace oil

Last Answer : (C) Light diesel oil

Correct viscosity of furnace oil at the burner tip for proper atomisation is about 25 centistokes. To reduce the viscosity of high viscosity furnace oil (250 centistokes) to the correct atomisation viscosity (i.e. 25 cst), it should be preheated to about ___________°C. (A) 70 (B) 85 (C) 105 (D) 145

Description : Correct viscosity of furnace oil at the burner tip for proper atomisation is about 25 centistokes. To reduce the viscosity of high viscosity furnace oil (250 centistokes) to the correct atomisation viscosity (i.e. 25 cst), it should be preheated to about ___________°C. (A) 70 (B) 85 (C) 105 (D) 145

Last Answer : (C) 105

Optimum preheating temperature for pitch creosote mixture (PCM) which is also termed as C.T.F-200, before atomisation through burners is (A) 200 °F (B) 200 °C (C) 200 °K (D) 200 °R

Description : Optimum preheating temperature for pitch creosote mixture (PCM) which is also termed as C.T.F-200, before atomisation through burners is (A) 200 °F (B) 200 °C (C) 200 °K (D) 200 °R

Last Answer : (A) 200 °F

Which of the following varies as the square root of oil pressure during atomisation of fuel oil through a pressure jet burner? (A) Output & fineness (B) Velocity (C) Both (A) & (B) (D) None of these

Description : Which of the following varies as the square root of oil pressure during atomisation of fuel oil through a pressure jet burner? (A) Output & fineness (B) Velocity (C) Both (A) & (B) (D) None of these

Last Answer : Option C

Choose a statement that correctly defines the term AMALGAM: A. Amalgam is a metallic powder composed of silver, tin, copper and zinc B. Amalgam is an alloy of two or more metals that have been dissolved in each other in the molten state. C. Amalgam is an alloy of two or more metals, one of them is mercury D. Amalgam is a metallic substance in powder or tablet from that is mixed with mercury E. Amalgam is an alloy of two or more metals, one of them is tin

Description : Choose a statement that correctly defines the term AMALGAM: A. Amalgam is a metallic powder composed of silver, tin, copper and zinc B. Amalgam is an alloy of two or more metals that have been dissolved in ... is mixed with mercury E. Amalgam is an alloy of two or more metals, one of them is tin

Last Answer : C. Amalgam is an alloy of two or more metals, one of them is mercury

What is the Gross National Product? a) The total value of Good and services manufactured in the country b) The total value of all the transactions in the country c) Reduction in the total value of goods and services produced in the country d) The total worth of goods and services generated in the country and net factor income from abroad.

Description : What is the Gross National Product? a) The total value of Good and services manufactured in the country b) The total value of all the transactions in the country c) Reduction in the total value ... d) The total worth of goods and services generated in the country and net factor income from abroad.

Last Answer : Answer- d

Attrition is,v A. Process of normal wear of teeth B. Lost of teeth substance as a result of chemical exposure

Description : Attrition is,v A. Process of normal wear of teeth B. Lost of teeth substance as a result of chemical exposure

Last Answer : A. Process of normal wear of teeth

If `H_(2)(g)=2H(g),DeltaH=104cal` , then heat of atomisation of hydrogen is

Description : If `H_(2)(g)=2H(g),DeltaH=104cal` , then heat of atomisation of hydrogen is

Last Answer : If `H_(2)(g)=2H(g),DeltaH=104cal` , then heat of atomisation of hydrogen is A. 52 Kcal B. 104 Kcal C. 208 Kcal D. None of these

Explain the following , giving reason . (a) Transition metal and many of their compounds show paramagnetic behavior (b) The enthalpy of atomisation of the transition metal is high . (c) The Transition metal generally form coloured compounds .

Description : Explain the following , giving reason . (a) Transition metal and many of their compounds show paramagnetic behavior (b) The enthalpy of atomisation of the transition metal is high . (c) The Transition metal generally form coloured compounds . 

Last Answer : Ans(a) It is due to unpaired electrons . (b) It is due to strong metallic bond and additional Covalent bonds due to presence of unpaired electron in d- orbitals (c) It is due to presence of unpaired electrons ,they undergo d-d transition . 

In the commercial electrochemical process for aluminium extraction, the electrolyte used is

Description : In the commercial electrochemical process for aluminium extraction, the electrolyte used is

Last Answer : In the commercial electrochemical process for aluminium extraction, the electrolyte used is A. `Al(OH)_(3)`in NaOH ... of AlO (OH) and `Al(OH)_(3)`

In the commercial electrochemical process for aluminium extraction, the electrolyte used is

Description : In the commercial electrochemical process for aluminium extraction, the electrolyte used is

Last Answer : In the commercial electrochemical process for aluminium extraction, the electrolyte used is A. `Al(OH)_(2)` is NaOH ... Al_(2)O_(3)` and `Al(OH)_(3)`

Electrochemical process (electrolysis of fused salt) is empolyed to extract

Description : Electrochemical process (electrolysis of fused salt) is empolyed to extract

Last Answer : Electrochemical process (electrolysis of fused salt) is empolyed to extract A. Iron B. Mg C. Na D. Both Na and Mg

The deterioration of a metal by an electrochemical process is commonly termed as – (1) Erosion (2) Corrosion (3) Passivation (4) Abrasion

Description : The deterioration of a metal by an electrochemical process is commonly termed as – (1) Erosion (2) Corrosion (3) Passivation (4) Abrasion

Last Answer : (2) Corrosion Explanation: Corrosion can be defined as the deterioration of materials by chemical processes.

The deterioration of a metal by an electrochemical process is commonly termed as (1) Erosion (2) Corrosion (3) Passivation (4) Abrasion

Description : The deterioration of a metal by an electrochemical process is commonly termed as (1) Erosion (2) Corrosion (3) Passivation (4) Abrasion

Last Answer : Corrosion

The material is crushed in a gyratory crusher by the action of (A) Impact (B) Compression (C) Attrition (D) Cutting

Description : The material is crushed in a gyratory crusher by the action of (A) Impact (B) Compression (C) Attrition (D) Cutting

Last Answer : (B) Compression

The grinding in a hammer crusher takes place due to the (A) Attrition (B) Impact (C) Both (A) & (B) (D) Neither (A) nor (B

Description : The grinding in a hammer crusher takes place due to the (A) Attrition (B) Impact (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

__________ mill is not used for grinding wheat into flour and for milling of cereals & other vegetable products. (A) Buhrstone (B) Roller (C) Attrition (D) Pebble

Description : __________ mill is not used for grinding wheat into flour and for milling of cereals & other vegetable products. (A) Buhrstone (B) Roller (C) Attrition (D) Pebble

Last Answer : (D) Pebble