General mechanism of size reduction in intermediate and fine grinder is by (A) Cutting action (B) Compression (C) Compression and tearing (D) Impact and attrition

General mechanism of size reduction in intermediate and fine grinder is
by
(A) Cutting action
(B) Compression
(C) Compression and tearing
(D) Impact and attrition
by

1 Answer

Answer :

(D) Impact and attrition
by

Related questions

Toothed roll crushers achieve size reduction by (A) Tearing (shear) and compression (B) Impact and attrition (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Toothed roll crushers achieve size reduction by (A) Tearing (shear) and compression (B) Impact and attrition (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Maximum size reduction in a ball mill is done by the, __________ action. (A) Attrition (B) Compression (C) Impact (D) Cutting

Description : Maximum size reduction in a ball mill is done by the, __________ action. (A) Attrition (B) Compression (C) Impact (D) Cutting

Last Answer : (C) Impact

The main size reduction operation in ultrafine grinders is (A) Cutting (B) Attrition (C) Compression (D) Impact

Description : The main size reduction operation in ultrafine grinders is (A) Cutting (B) Attrition (C) Compression (D) Impact

Last Answer : (B) Attrition

Colloid mills achieve size reduction mainly by (A) Impact (B) Attrition (C) Cutting (D) Compression

Description : Colloid mills achieve size reduction mainly by (A) Impact (B) Attrition (C) Cutting (D) Compression

Last Answer : (B) Attrition

Maximum size reduction in a fluid energy mill is achieved by (A) Compression (B) Interparticle attrition (C) Cutting (D) Impact

Description : Maximum size reduction in a fluid energy mill is achieved by (A) Compression (B) Interparticle attrition (C) Cutting (D) Impact

Last Answer : (B) Interparticle attrition

Pick out the wrong statement. (A) More commonly used jaw crusher between Dodge jaw crusher and Blake jaw crusher is the later one(B) There are only four methods namely compression, impact, attrition andcutting, which the size reduction equipments employ(C) Cutting machines mainly employ 'attrition' for size reduction of solids(D) Operating principles of Dodge and Blake jaw crushers are combined inthe working of universal jaw crushers

Description : Pick out the wrong statement. (A) More commonly used jaw crusher between Dodge jaw crusher and Blake jaw crusher is the later one (B) There are only four methods namely compression, impact ... Operating principles of Dodge and Blake jaw crushers are combined in the working of universal jaw crushers

Last Answer : (C) Cutting machines mainly employ 'attrition' for size reduction of solids

For coarse reduction of hard solids, use (A) Impact (B) Attrition (C) Compression (D) Cutting

Description : For coarse reduction of hard solids, use (A) Impact (B) Attrition (C) Compression (D) Cutting

Last Answer : (C) Compression

The material is crushed in a gyratory crusher by the action of (A) Impact (B) Compression (C) Attrition (D) Cutting

Description : The material is crushed in a gyratory crusher by the action of (A) Impact (B) Compression (C) Attrition (D) Cutting

Last Answer : (B) Compression

Ultrafine grinders operate principally by (A) Slow compression (B) Impact (C) Attrition (D) Cutting action

Description : Ultrafine grinders operate principally by (A) Slow compression (B) Impact (C) Attrition (D) Cutting action

Last Answer : (C) Attrition

Size reduction mechanism used in Jaw crushers is (A) Attrition (B) Compression

Description : Size reduction mechanism used in Jaw crushers is (A) Attrition (B) Compression

Last Answer : (B) Compression

The mechanism of size reduction by a hammer mill is by impact and attrition between the (A) Grinding element & the housing (B) Feed particles (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The mechanism of size reduction by a hammer mill is by impact and attrition between the (A) Grinding element & the housing (B) Feed particles (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Soft & non-abrasive materials can be made into fines by (A) Attrition (B) Compression (C) Cutting (D) None of these

Description : Soft & non-abrasive materials can be made into fines by (A) Attrition (B) Compression (C) Cutting (D) None of these

Last Answer : (A) Attrition

Which of the following terminology is not used for size reduction of materials to fine sizes or powders? (A) Comminution (B) Dispersion (C) Pulverisation (D) Compression

Description : Which of the following terminology is not used for size reduction of materials to fine sizes or powders? (A) Comminution (B) Dispersion (C) Pulverisation (D) Compression

Last Answer : (D) Compression

Which of the following size reduction equipments employs mainly attrition for ultrafine grinding? (A) Jet mills (B) Fluid energy mill (C) Micronizer (D) All (A), (B) and (C)

Description : Which of the following size reduction equipments employs mainly attrition for ultrafine grinding? (A) Jet mills (B) Fluid energy mill (C) Micronizer (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement. (A) Recycled coarse material to the grinder by a classifier is termed as circulating load (B) Wear and tear in wet crushing is more than that in dry crushing of materials (C) Size enlargement (opposite of size reduction) is not a mechanical operation (D) A 'dust catcher' is simply an enlargement in a pipeline which permits the solids to settle down due to reduction in velocity of the dust laden gas

Description : Pick out the wrong statement. (A) Recycled coarse material to the grinder by a classifier is termed as circulating load (B) Wear and tear in wet crushing is more than that in dry crushing of ... a pipeline which permits the solids to settle down due to reduction in velocity of the dust laden gas

Last Answer : (C) Size enlargement (opposite of size reduction) is not a mechanical operation

A patient has improperly formed DEJ, reduction in size of pulp chamber, chipping and attrition of enamel that would MOSTLY be: A. Fluorosis B. Amelogenesis imperfecta C. Dentinogenesis imperfecta

Description : A patient has improperly formed DEJ, reduction in size of pulp chamber, chipping and attrition of enamel that would MOSTLY be: A. Fluorosis B. Amelogenesis imperfecta C. Dentinogenesis imperfecta

Last Answer : C. Dentinogenesis imperfecta

Ball mill is used for (A) Crushing (B) Coarse grinding (C) Fine grinding (D) Attrition

Description : Ball mill is used for (A) Crushing (B) Coarse grinding (C) Fine grinding (D) Attrition

Last Answer : (C) Fine grinding

Alloy powder manufactured by the following process have spherical shapes. (A) Electrochemical deposition (B) Gaseous reduction (C) Atomisation (D) Mechanical attrition

Description : Alloy powder manufactured by the following process have spherical shapes. (A) Electrochemical deposition (B) Gaseous reduction (C) Atomisation (D) Mechanical attrition

Last Answer : (C) Atomisation

The grinding in a hammer crusher takes place due to the (A) Attrition (B) Impact (C) Both (A) & (B) (D) Neither (A) nor (B

Description : The grinding in a hammer crusher takes place due to the (A) Attrition (B) Impact (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

Any suggestions for reducing tearing up while cutting an onion?

Description : Any suggestions for reducing tearing up while cutting an onion?

Last Answer : 1. Gas mask. 2. The pesky chopper from telemarketing. 3. A cooking slave. 4. Cutting it in a clear bag. 5. Cutting it from a distance.

What of these is responsible for cutting tearing and grinding food?

Description : What of these is responsible for cutting tearing and grinding food?

Last Answer : its ur TEETH

Los Angeles testing machine is used to conduct (A) Abrasion test (B) Impact test (C) Attrition test (D) Crushing strength test

Description : Los Angeles testing machine is used to conduct (A) Abrasion test (B) Impact test (C) Attrition test (D) Crushing strength test

Last Answer : Answer: Option A

Explain the working, advantages and disadvantages of any one mill based on the principle of combined impact and attrition?

Description : Explain the working, advantages and disadvantages of any one mill based on the principle of combined impact and attrition?

Last Answer : which of the following mill works on the principle of combined impact and attrition

The most likely mechanism of antihypertensive action of thiazide diuretics in the long-term is: A. Reduction of circulating blood volume B. Reduction in cardiac output C. Decreased sympathetic tone D. Reduction in total peripheral vascular resistance and improved compliance of resistance vessels

Description : The most likely mechanism of antihypertensive action of thiazide diuretics in the long-term is: A. Reduction of circulating blood volume B. Reduction in cardiac output C. Decreased sympathetic tone D. Reduction in total peripheral vascular resistance and improved compliance of resistance vessels

Last Answer : D. Reduction in total peripheral vascular resistance and improved compliance of resistance vessels

Size reduction does not occur due to compression in case of (A) Rod mills (B) Gyratory crushers (C) Jaw crushers (D) Smooth roll crushers

Description : Size reduction does not occur due to compression in case of (A) Rod mills (B) Gyratory crushers (C) Jaw crushers (D) Smooth roll crushers

Last Answer : (A) Rod mills

In a size reduction crushing operation, the feed size is 10 to 50 mm, while the product size is 2 to 10 mm. This is a case of __________ crushing. (A) Primary (B) Secondary (C) Fine

Description : In a size reduction crushing operation, the feed size is 10 to 50 mm, while the product size is 2 to 10 mm. This is a case of __________ crushing. (A) Primary (B) Secondary (C) Fine

Last Answer : (C) Fine

In a size reduction crushing operation, feed size is 100 to 300 mm. while the product size is 10 to 50 mm. This is a case of the __________ crushing. (A) Primary (B) Secondary (C) Fine (D) Ultrafine

Description : In a size reduction crushing operation, feed size is 100 to 300 mm. while the product size is 10 to 50 mm. This is a case of the __________ crushing. (A) Primary (B) Secondary (C) Fine (D) Ultrafine

Last Answer : (B) Secondary

In a size reduction crushing operation, feed size is 300 to 1500 mm while the product size is 100 to 300 mm. This is a case of the __________ crushing. (A) Secondary (B) Fine (C) Primary (D) Ultrafine

Description : In a size reduction crushing operation, feed size is 300 to 1500 mm while the product size is 100 to 300 mm. This is a case of the __________ crushing. (A) Secondary (B) Fine (C) Primary (D) Ultrafine

Last Answer : (C) Primary

In case of a hammer crusher, (A) Crushing takes place by impact breaking (B) Maximum acceptable feed size is 30 cms (C) Reduction ratio can be varied by adjusting the distance from cage to hammers (D) All (A), (B) and (C)

Description : In case of a hammer crusher, (A) Crushing takes place by impact breaking (B) Maximum acceptable feed size is 30 cms (C) Reduction ratio can be varied by adjusting the distance from cage to hammers (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Colloidal mills are used for __________ grinding. (A) Coarse (B) Intermediate (C) Fine (D) Ultrafine

Description : Colloidal mills are used for __________ grinding. (A) Coarse (B) Intermediate (C) Fine (D) Ultrafine

Last Answer : (D) Ultrafine

Gravity stamp mill is meant for the __________ crushing. (A) Primary (B) Intermediate (C) Fine (D) Ultrafine

Description : Gravity stamp mill is meant for the __________ crushing. (A) Primary (B) Intermediate (C) Fine (D) Ultrafine

Last Answer : (C) Fine

Processing of a data file to reduce its size for storage on disk is termed : (1) Amplification (2) Reduction (3) Compression (4) Rarefaction

Description : Processing of a data file to reduce its size for storage on disk is termed : (1) Amplification (2) Reduction (3) Compression (4) Rarefaction

Last Answer : Compression

Which of the following factors can affect the shape and size of the pulp canal: A. Chemical irritation and caries B. Trauma and function C. Attrition, wear and aging of the patient D. All of the above

Description : Which of the following factors can affect the shape and size of the pulp canal: A. Chemical irritation and caries B. Trauma and function C. Attrition, wear and aging of the patient D. All of the above

Last Answer : D. All of the above

Which of the following reaction mechanism doe not involves carbocation as an intermediate ?

Description : Which of the following reaction mechanism doe not involves carbocation as an intermediate ?

Last Answer : Which of the following reaction mechanism doe not involves carbocation as an intermediate ? A. ... C. Fries Rearrangements D. Diels- Alder reaction

`S_(N^(1))` mechanism for the hydrolysis of an alkyl halide involves the formation of intermediate:

Description : `S_(N^(1))` mechanism for the hydrolysis of an alkyl halide involves the formation of intermediate:

Last Answer : `S_(N^(1))` mechanism for the hydrolysis of an alkyl halide involves the formation of intermediate: ... B. carbocation C. carbanion D. none of these

Which of the following is not a correct statement about the electrophilic substitution mechanism of benzene? (a) Benzene functions as a nucleophile. (b) Formation of a carbocation intermediate is the rate-determining step. (c) The carbocation intermediate contains an sp3 hybridized carbon in the ring. (d) The addition product is a frequently observed minor product.

Description : Which of the following is not a correct statement about the electrophilic substitution mechanism of benzene? (a) Benzene functions as a nucleophile. (b) Formation of a carbocation intermediate is the ... hybridized carbon in the ring. (d) The addition product is a frequently observed minor product.

Last Answer : The addition product is a frequently observed minor product.

The mechanism involved in the removal of metal in drilling operation is by (A) Compression (B) Extrusion (C) Shearing (D) Both 'b' & 'c'

Description : The mechanism involved in the removal of metal in drilling operation is by (A) Compression (B) Extrusion (C) Shearing (D) Both 'b' & 'c'

Last Answer : (D) Both 'b' & 'c'

Maraging steels derive their strength from the following mechanism: (A) A fine, highly dislocated and strong martensite (B) Fine dispersions of inter-metallic of Fe, Ni, Ti etc (C) Fine dispersions of alloy carbides in a ferrite matrix (D) Fine dispersions of Fe3 C nucleated on dislocations in austenite

Description : Maraging steels derive their strength from the following mechanism: (A) A fine, highly dislocated and strong martensite (B) Fine dispersions of inter-metallic of Fe, Ni, Ti etc (C) Fine ... alloy carbides in a ferrite matrix (D) Fine dispersions of Fe3 C nucleated on dislocations in austenite

Last Answer : Option A

The rise and fall method of reduction of levels, provides a check on (A) Back sights (B) Fore sights (C) Intermediate sights (D) All of these

Description : The rise and fall method of reduction of levels, provides a check on (A) Back sights (B) Fore sights (C) Intermediate sights (D) All of these

Last Answer : (D) All of these

The line of collimation method of reduction of levels, does not provide a check on (A) Intermediate sights (B) Fore sights (C) Back sights (D) Reduced levels

Description : The line of collimation method of reduction of levels, does not provide a check on (A) Intermediate sights (B) Fore sights (C) Back sights (D) Reduced levels

Last Answer : (A) Intermediate sights

The reduction ratio for fine grinders is (A) 5-10 (B) 10-20 (C) 20-40 (D) As high as 100

Description : The reduction ratio for fine grinders is (A) 5-10 (B) 10-20 (C) 20-40 (D) As high as 100

Last Answer : (D) As high as 100

__________ mill is not used for grinding wheat into flour and for milling of cereals & other vegetable products. (A) Buhrstone (B) Roller (C) Attrition (D) Pebble

Description : __________ mill is not used for grinding wheat into flour and for milling of cereals & other vegetable products. (A) Buhrstone (B) Roller (C) Attrition (D) Pebble

Last Answer : (D) Pebble

Mixing of light fine powder such as insecticides is done by (A) Banbury mixer (B) Pug mill (C) Impact wheels (D) Kneader

Description : Mixing of light fine powder such as insecticides is done by (A) Banbury mixer (B) Pug mill (C) Impact wheels (D) Kneader

Last Answer : (C) Impact wheels

Describe the mechanism of chip formation during metal cutting with the help of sketch.

Description : Describe the mechanism of chip formation during metal cutting with the help of sketch.

Last Answer : Mechanism of chip formation : In Fig. the tool is considered stationary, and the work piece moves to the right. The metal is severely compressed in the area in front of the cutting tool. This causes ... movement transferred to the next element. The process is repetitive and a chip is formed. 

This type seed metering mechanism consist of wheel with fine and coarse ribbed flanges. b. fluted feed c. Cup feed d. None of the above

Description : This type seed metering mechanism consist of wheel with fine and coarse ribbed flanges. b. fluted feed c. Cup feed d. None of the above

Last Answer : Ans - a. Internal double run

Seating the brushes on a D.C. motor is first accomplished using ________________. A. a file for cutting the approximate curvature followed by sandpaper for the final fit B. sandpaper with the motor not operating and then a seating stone while running the machine C. emery paper for the initial cut and crocus cloth for the finishing cut D. course lapping compound, followed by a medium and then a fine grade

Description : Seating the brushes on a D.C. motor is first accomplished using ________________. A. a file for cutting the approximate curvature followed by sandpaper for the final fit B. sandpaper with the motor not ... for the finishing cut D. course lapping compound, followed by a medium and then a fine grade

Last Answer : Answer: B

Pick up the correct statement from the following: (A) Plain cement concrete is equally strong in compression as well as in tension (B) Slump test is performed to check concrete strength (C) Curing of concrete is done for proper compaction of cement (D) Fineness modulus is the index number expressing the relative sizes of both coarse and fine aggregates

Description : Pick up the correct statement from the following: (A) Plain cement concrete is equally strong in compression as well as in tension (B) Slump test is performed to check concrete strength (C ... D) Fineness modulus is the index number expressing the relative sizes of both coarse and fine aggregates

Last Answer : Option D

Which of the following statements about the role of the gut in shock and sepsis are true? A. Selective decontamination of the digestive tract with the use of oral antibiotics has been shown to reduce nosocomial pneumonias and to improve mortality rates. B. Enteral nutrition, as compared with parenteral nutrition, preserves the villus architecture of the gut. C. Gut dysfunction may be an effect of shock, but it may also contribute to the development of MODS by the mechanism of bacterial translocation. D. As compared with parenteral nutrition, enteral nutrition is associated with a reduction in septic morbidity.

Description : Which of the following statements about the role of the gut in shock and sepsis are true? A. Selective decontamination of the digestive tract with the use of oral antibiotics has been ... As compared with parenteral nutrition, enteral nutrition is associated with a reduction in septic morbidity.

Last Answer : Answer: BCD DISCUSSION: The gut has a vital role in the pathophysiology of shock. The splanchnic circulation is very vulnerable to the circulatory redistribution that occurs in shock, thus, gut ... , enteral feeding is more cost effective and is associated with a lower rate of septic morbidity

The primary mechanism of beneficial effect of glyceryl trinitrate in classical angina pectoris is (a) Increase in total coronary blood flow (b) Redistribution of coronary blood flow (c) Reduction of cardiac preload (d) Reduction of cardiac after load

Description : The primary mechanism of beneficial effect of glyceryl trinitrate in classical angina pectoris is (a) Increase in total coronary blood flow (b) Redistribution of coronary blood flow (c) Reduction of cardiac preload (d) Reduction of cardiac after load

Last Answer : Ans: C

The primary mechanism of beneficial effect of glyceryl trinitrate in classical angina pectoris is: A. Increase in total coronary blood flow B. Redistribution of coronary blood flow C. Reduction of cardiac preload D. Reduction of cardiac afterload

Description : The primary mechanism of beneficial effect of glyceryl trinitrate in classical angina pectoris is: A. Increase in total coronary blood flow B. Redistribution of coronary blood flow C. Reduction of cardiac preload D. Reduction of cardiac afterload

Last Answer : C. Reduction of cardiac preload