Coolant used in a boiling water reactor is (A) Hydrogen gas (B) Water (C) Steam (D) A mixture of water & steam

Coolant used in a boiling water reactor is
(A) Hydrogen gas
(B) Water
(C) Steam
(D) A mixture of water & steam
by

1 Answer

Answer :

(D) A mixture of water & steam
by

Related questions

A boiling water reactor is the one, in which the (A) Coolant water is allowed to boil in the core of the reactor (B) Coolant water, after being heated in the reactor core, generates steam in a boiler (C) Pressurised water is pumped into the core (D) Fuel and the coolant are thoroughly mixed to form a homogeneous solution

Description : A boiling water reactor is the one, in which the (A) Coolant water is allowed to boil in the core of the reactor (B) Coolant water, after being heated in the reactor core, generates steam ... water is pumped into the core (D) Fuel and the coolant are thoroughly mixed to form a homogeneous solution

Last Answer : (A) Coolant water is allowed to boil in the core of the reactor

In a pressurised water reactor (PWR), the (A) Fuel is natural uranium and heavy water acts both as moderator & coolant (B) Coolant water boils in the core of the reactor (C) Coolant water is pressurised to prevent bulk boiling of water in the core (D) Use of moderator is not required

Description : In a pressurised water reactor (PWR), the (A) Fuel is natural uranium and heavy water acts both as moderator & coolant (B) Coolant water boils in the core of the reactor (C) Coolant water is pressurised to prevent bulk boiling of water in the core (D) Use of moderator is not required

Last Answer : (C) Coolant water is pressurised to prevent bulk boiling of water in the core

__________ gas is normally not used as a coolant in a nuclear reactor, because of its high neutron capture cross-section. (A) Nitrogen (B) Hydrogen (C) Helium (D) Carbon dioxide

Description : __________ gas is normally not used as a coolant in a nuclear reactor, because of its high neutron capture cross-section. (A) Nitrogen (B) Hydrogen (C) Helium (D) Carbon dioxide

Last Answer : (A) Nitrogen

Secondary cooling circuit is a must in molten sodium cooled fast breeder reactor for (A) Achieving high degree of superheat in the steam (B) Faster heat removal rate from the core(C) Lowering the coolant circulation pressure(D) Avoiding the mixing of water with radioactive sodium, as it may causeexplosion

Description : Secondary cooling circuit is a must in molten sodium cooled fast breeder reactor for (A) Achieving high degree of superheat in the steam (B) Faster heat removal rate from the core (C) ... circulation pressure (D) Avoiding the mixing of water with radioactive sodium, as it may cause explosion

Last Answer : (D) Avoiding the mixing of water with radioactive sodium, as it may cause explosion

Pressure in a Pressurised Water Reactor (PWR) is used for (A) Maintaining constant pressure in the primary cooling circuit under varying loads (B) Superheating the steam (C) Pressurising the water in the primary coolant circuit (D) None of these

Description : Pressure in a Pressurised Water Reactor (PWR) is used for (A) Maintaining constant pressure in the primary cooling circuit under varying loads (B) Superheating the steam (C) Pressurising the water in the primary coolant circuit (D) None of these

Last Answer : (A) Maintaining constant pressure in the primary cooling circuit under varying loads

Coolant present in the primary circuit of a pressurised water reactor is high pressure (A) Sub cooled water (B) Saturated water (C) Superheated steam (D) Saturated steam

Description : Coolant present in the primary circuit of a pressurised water reactor is high pressure (A) Sub cooled water (B) Saturated water (C) Superheated steam (D) Saturated steam

Last Answer : (B) Saturated wate

_________ nuclear reactor does not require a heat exchanger tosupply steam to power turbine.(A) Molten sodium cooled(B) Helium cooled(C) Boiling water(D) Pressurised water

Description : _________ nuclear reactor does not require a heat exchanger tosupply steam to power turbine. (A) Molten sodium cooled (B) Helium cooled (C) Boiling water (D) Pressurised water

Last Answer : (C) Boiling water

Heavy water (D2O) in a nuclear reactor serves as a (A) Coolant (B) Moderator (C) Both (A) & (B) (D) Neutron absorber

Description : Heavy water (D2O) in a nuclear reactor serves as a (A) Coolant (B) Moderator (C) Both (A) & (B) (D) Neutron absorber

Last Answer : (C) Both (A) & (B)

A homogeneous reactor is the one, in which the (A) Fissile atoms are evenly distributed throughout the mass of nuclear reactor (B) Same substance (e.g. heavy water) is used as moderator & coolant (C) The fuel and the moderator is mixed to form a homogeneous material (D) All (A), (B) and (C)

Description : A homogeneous reactor is the one, in which the (A) Fissile atoms are evenly distributed throughout the mass of nuclear reactor (B) Same substance (e.g. heavy water) is used as moderator & coolant (C) The fuel and the moderator is mixed to form a homogeneous material (D) All (A), (B) and (C)

Last Answer : (C) The fuel and the moderator is mixed to form a homogeneous material

In a homogeneous nuclear reactor, the __________ are mixed together. (A) Fuel & coolant (B) Fuel & moderator (C) Coolant & moderator (D) None of these

Description : In a homogeneous nuclear reactor, the __________ are mixed together. (A) Fuel & coolant (B) Fuel & moderator (C) Coolant & moderator (D) None of these

Last Answer : (B) Fuel & moderator

Pressure of CO2 gas (which is a coolant) in the Calder-Hall nuclear reactor is __________ kgf/cm2 . (A) 0.2 (B) 7 (C) 35 (D) 50

Description : Pressure of CO2 gas (which is a coolant) in the Calder-Hall nuclear reactor is __________ kgf/cm2 . (A) 0.2 (B) 7 (C) 35 (D) 50

Last Answer : (B) 7

Glycerine is used as a coolant in cooling of some engines instead of water, because (A) Its higher boiling point (290°C) increases its heat carrying capacity (B) Comparatively less weight of coolant is required (C) Smaller radiator can be used (D) All a, b & c

Description : Glycerine is used as a coolant in cooling of some engines instead of water, because (A) Its higher boiling point (290°C) increases its heat carrying capacity (B) Comparatively less weight of coolant is required (C) Smaller radiator can be used (D) All a, b & c

Last Answer : (D) All a, b & c

Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if distilled directly at atmospheric pressure (C) Material cannot be distilled by indirect heating even under low pressure, because of the high boiling temperature (D) Material to be distilled is thermally unstable or has the tendency to react with other components associated with it, at the boiling temperature

Description : Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if ... unstable or has the tendency to react with other components associated with it, at the boiling temperature

Last Answer : (A) Azeotropic mixture is to be separated and the final product is miscible with water

Components, having widely different boiling point in a binary mixture, can be separated using __________ distillation. (A) Molecular (B) Extractive (C) Steam (D) Simple

Description : Components, having widely different boiling point in a binary mixture, can be separated using __________ distillation. (A) Molecular (B) Extractive (C) Steam (D) Simple

Last Answer : (D) Simple

When the mixture to be distilled has a very high boiling point and the product material is heat sensitive, the separation technique to be used is __________ distillation. (A) Continuous (B) Steam (C) Azeotropic (D) None of these

Description : When the mixture to be distilled has a very high boiling point and the product material is heat sensitive, the separation technique to be used is __________ distillation. (A) Continuous (B) Steam (C) Azeotropic (D) None of these

Last Answer : (B) Steam

In a high-temperature gas-cooled reactor, what gas ma be used for a coolant?

Description : In a high-temperature gas-cooled reactor, what gas ma be used for a coolant?

Last Answer : ANSWER: HELIUM or CARBON DIOXIDE

Molten sodium (as a coolant in fast breeder reactor) (A) Can’t attain high temperature at normal pressure (B) Is not at all corrosive, even at a higher temperature (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water (D) None of these

Description : Molten sodium (as a coolant in fast breeder reactor) (A) Can’t attain high temperature at normal pressure (B) Is not at all corrosive, even at a higher temperature (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water (D) None of these

Last Answer : (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water

A pressurised water reactor (PWR) uses pressurised water as a (A) Coolant (B) Working fluid in power turbine (C) Moderator (D) None of these

Description : A pressurised water reactor (PWR) uses pressurised water as a (A) Coolant (B) Working fluid in power turbine (C) Moderator (D) None of these

Last Answer : (A) Coolant

A fast breeder reactor employs (A) Graphite as moderator (B) Water as coolant (C) Molten sodium as coolant as well as moderator (D) U-235 as fuel

Description : A fast breeder reactor employs (A) Graphite as moderator (B) Water as coolant (C) Molten sodium as coolant as well as moderator (D) U-235 as fuel

Last Answer : (D) U-235 as fuel

Light water' used as a coolant in nuclear reactor is nothing but (A) Ordinary water (B) Mildly acidic (pH = 6) water (C) Mildly alkaline (pH = 8) water (D) None of these

Description : Light water' used as a coolant in nuclear reactor is nothing but (A) Ordinary water (B) Mildly acidic (pH = 6) water (C) Mildly alkaline (pH = 8) water (D) None of these

Last Answer : (A) Ordinary water

Coolant used in a fast breeder reactor is (A) Molten sodium (B) Heavy water (C) Ordinary water (D) Helium

Description : Coolant used in a fast breeder reactor is (A) Molten sodium (B) Heavy water (C) Ordinary water (D) Helium

Last Answer : (A) Molten sodium

A heterogeneous reactor is the one, in which the moderator and the (A) Coolant are different materials (B) Coolant are present in different phases (e.g., heavy water and graphite) (C) Fuel are present in different phases (e.g. uranium and heavy water) (D) None of these

Description : A heterogeneous reactor is the one, in which the moderator and the (A) Coolant are different materials (B) Coolant are present in different phases (e.g., heavy water and graphite) (C) Fuel are present in different phases (e.g. uranium and heavy water) (D) None of these

Last Answer : (C) Fuel are present in different phases (e.g. uranium and heavy water

Which of the following has the lowest Prandtl number? (A) Molten sodium (a coolant used in fast breeder reactor) (B) Water (C) Transformer oil (D) Dilute H2SO4

Description : Which of the following has the lowest Prandtl number? (A) Molten sodium (a coolant used in fast breeder reactor) (B) Water (C) Transformer oil (D) Dilute H2SO4

Last Answer : (A) Molten sodium (a coolant used in fast breeder reactor)

Which of the following gases has very high neutron capture cross￾section, making it unsuitable as a coolant in nuclear reactor? (A) N2 (B) He (C) CO2 (D) H2

Description : Which of the following gases has very high neutron capture cross￾section, making it unsuitable as a coolant in nuclear reactor? (A) N2 (B) He (C) CO2 (D) H2

Last Answer : (A) N2

Thermal shield is used in high powered nuclear reactors to (A) Protect the walls of the reactor from radiation damageB) Absorb the fast neutrons(C) Slow down the secondary neutrons(D) Protect the fuel element from coming in contact with the coolant

Description : Thermal shield is used in high powered nuclear reactors to (A) Protect the walls of the reactor from radiation damage B) Absorb the fast neutrons (C) Slow down the secondary neutrons (D) Protect the fuel element from coming in contact with the coolant

Last Answer : (A) Protect the walls of the reactor from radiation damage

A fast breeder reactor (A) Utilises fast neutrons for causing fission (B) Converts fertile material (e.g., U-238) into fissile material (Pu-239) (C) Normally employs molten sodium as coolant (D) All (A), (B) and (C)

Description : A fast breeder reactor (A) Utilises fast neutrons for causing fission (B) Converts fertile material (e.g., U-238) into fissile material (Pu-239) (C) Normally employs molten sodium as coolant (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Fast breeder test reactor at Kalpakkam (INDIA) is designed for using (A) Thorium as a fertile material (B) U-238 as a fertile material (C) Helium as a coolant (D) Uranium ore directly as a fuel

Description : Fast breeder test reactor at Kalpakkam (INDIA) is designed for using (A) Thorium as a fertile material (B) U-238 as a fertile material (C) Helium as a coolant (D) Uranium ore directly as a fuel

Last Answer : (A) Thorium as a fertile material

Molten sodium is used as a coolant in a fast breeder reactor, because of its (A) Excellent moderating properties (B) Neutron breeding capability (C) Faster heat removal capability from the core (D) Capability to increase the reaction rate in the core

Description : Molten sodium is used as a coolant in a fast breeder reactor, because of its (A) Excellent moderating properties (B) Neutron breeding capability (C) Faster heat removal capability from the core (D) Capability to increase the reaction rate in the core

Last Answer : (C) Faster heat removal capability from the core

Use of molten metal as a coolant in fast breeder reactor helps in (A) Rapid heat transfer from the core (B) Accelerating the reaction rate in the core (C) Breeding neutrons (D) Accelerating the neutrons

Description : Use of molten metal as a coolant in fast breeder reactor helps in (A) Rapid heat transfer from the core (B) Accelerating the reaction rate in the core (C) Breeding neutrons (D) Accelerating the neutrons

Last Answer : (A) Rapid heat transfer from the core

Liquid metal (e.g., molten sodium) is preferred as a coolant in case of a/an __________ reactor. (A) Homogeneous (B) Graphite moderated (C) Fast breeder (D) Enriched uranium (3% U-235) fuelled

Description : Liquid metal (e.g., molten sodium) is preferred as a coolant in case of a/an __________ reactor. (A) Homogeneous (B) Graphite moderated (C) Fast breeder (D) Enriched uranium (3% U-235) fuelled

Last Answer : (C) Fast breeder

Which is used as a coolant in nuclear reactor due to its high capture cross-section? (A) H2 (B) N2 (C) He (D) CO2

Description : Which is used as a coolant in nuclear reactor due to its high capture cross-section? (A) H2 (B) N2 (C) He (D) CO2

Last Answer : (A) H2

An ideal coolant for a nuclear reactor should (A) Be a good absorber of neutrons (B) Be capable of attaining high temperature, only when it is pressurised (C) Have high density, but low heat transfer co-efficient (D) Be free from radiation damage and non-corrosive

Description : An ideal coolant for a nuclear reactor should (A) Be a good absorber of neutrons (B) Be capable of attaining high temperature, only when it is pressurised (C) Have high density, but low heat transfer co-efficient (D) Be free from radiation damage and non-corrosive

Last Answer : (D) Be free from radiation damage and non-corrosive

The type of pump used for the recirculation of molten sodium coolant in liquid metal cooled reactor is a/an __________ pump. (A) Electromagnetic (B) Reciprocating (C) Centrifugal (D) Volute

Description : The type of pump used for the recirculation of molten sodium coolant in liquid metal cooled reactor is a/an __________ pump. (A) Electromagnetic (B) Reciprocating (C) Centrifugal (D) Volute

Last Answer : (A) Electromagnetic

Centrifugal pump can't be used to pump (A) Molten sodium (used as a coolant in Fast Breeder Reactor) (B) Moderately viscous vegetable oil used in soap industry (C) Thick molten soap at 80°C (D) None of the above

Description : Centrifugal pump can't be used to pump (A) Molten sodium (used as a coolant in Fast Breeder Reactor) (B) Moderately viscous vegetable oil used in soap industry (C) Thick molten soap at 80°C (D) None of the above

Last Answer : (C) Thick molten soap at 80°C

Liquefied Petroleum Gas (LPG) is mainly a mixture of (A) Propane & butane (B) Methane & ethane (C) High boiling olefins (D) High boiling naphthenes

Description : Liquefied Petroleum Gas (LPG) is mainly a mixture of (A) Propane & butane (B) Methane & ethane (C) High boiling olefins (D) High boiling naphthenes

Last Answer : (A) Propane & butane

The _____________ sensor senses the temperature of the engine coolant, and from this data the computer adjusts the mixture strength to rich side for cold starting. a) engine temperature b) exhaust gas c) air flow d) air inlet temperature

Description : The _____________ sensor senses the temperature of the engine coolant, and from this data the computer adjusts the mixture strength to rich side for cold starting. a) engine temperature b) exhaust gas c) air flow d) air inlet temperature

Last Answer : Answer: a Explanation: The engine temperature sensor senses the temperature of the engine coolant, and from this data the computer adjusts the mixture strength to rich side for cold starting while the ... gas senor senses the amount of oxygen in the engine exhaust and calculates air-fuel ratio.

Nuclear power reactor located at Tarapur is of __________ type. (A) Fast breeder (B) Pressurised water (C) Boiling water (D) Gas cooled

Description : Nuclear power reactor located at Tarapur is of __________ type. (A) Fast breeder (B) Pressurised water (C) Boiling water (D) Gas cooled

Last Answer : (C) Boiling water

Which of the following types of nuclear reactors is most prone to radioactive hazards? (A) Pressurised water reactor (B) Gas cooled reactor (C) Molten sodium cooled reactor (D) Boiling water reactor

Description : Which of the following types of nuclear reactors is most prone to radioactive hazards? (A) Pressurised water reactor (B) Gas cooled reactor (C) Molten sodium cooled reactor (D) Boiling water reactor

Last Answer : (D) Boiling water reactor

Which of the following nuclear reactors is the most efficient thermodynamically while operating between the same temperature and pressure limits of the reactor? (A) Molten sodium cooled (B) CO2 gas cooled (C) Pressurised water (D) Boiling water

Description : Which of the following nuclear reactors is the most efficient thermodynamically while operating between the same temperature and pressure limits of the reactor? (A) Molten sodium cooled (B) CO2 gas cooled (C) Pressurised water (D) Boiling water

Last Answer : (D) Boiling water

In nuclear reactor, heavy water is used as – (1) coolant (2) fuel (3) moderator (4) atomic smasher

Description : In nuclear reactor, heavy water is used as – (1) coolant (2) fuel (3) moderator (4) atomic smasher

Last Answer : (3) moderator Explanation: Heavy water is used in certain types of nuclear reactors where it acts as a neutron moderator to slow down neutrons so that they are more likely to react with ... do not require uranium enrichment, heavy water reactors are of concern in regards to nuclear proliferation.

Which nuclear reactor uses water as a coolant, moderator and reflector ?

Description : Which nuclear reactor uses water as a coolant, moderator and reflector ?

Last Answer : Pressurised water reactor.

In which reactor the coolant and moderator are the same ? Pressurised water reactor.

Description : In which reactor the coolant and moderator are the same ? Pressurised water reactor.

Last Answer : Pressurised water reactor.

Heavy water used as a coolant in nuclear reactor. Heavy Water is:

Description : Heavy water used as a coolant in nuclear reactor. Heavy Water is:

Last Answer : Water containing heavy Isotopes of Hydrogen atom

A fast reactor uses: w) an extremely short time to get to the maximum operating reactivity. x) uranium-235 as fuel. y) heavy water as a coolant. z) essentially unmoderated neutrons.

Description : A fast reactor uses: w) an extremely short time to get to the maximum operating reactivity. x) uranium-235 as fuel. y) heavy water as a coolant. z) essentially unmoderated neutrons.

Last Answer : ANSWER: Z -- ESSENTIALLY UNMODERATED NEUTRONS.

In a light-water reactor, the coolant is ordinary water. What is the moderator?

Description : In a light-water reactor, the coolant is ordinary water. What is the moderator?

Last Answer : ANSWER: WATER or THE SAME WATER

In nuclear reactor, heavy water is used as (1) coolant (2) fuel (3) moderator (4) atomic smasher

Description : In nuclear reactor, heavy water is used as (1) coolant (2) fuel (3) moderator (4) atomic smasher

Last Answer : moderator

In a co-current double pipe heat exchanger used for condensing saturated steam over the inner tube, if the entrance and exit conditions of the coolant are interchanged, then the rate of condensation will (A) Increase (B) Decrease (C) Remain unchanged (D) Either increase or decrease; depends on the coolant flow rate

Description : In a co-current double pipe heat exchanger used for condensing saturated steam over the inner tube, if the entrance and exit conditions of the coolant are interchanged, then the rate of condensation ... Decrease (C) Remain unchanged (D) Either increase or decrease; depends on the coolant flow rate

Last Answer : (C) Remain unchanged

Which reactor uses primary coolant as fluoride salts of lithium, beryllium, thorium and uranium ?

Description : Which reactor uses primary coolant as fluoride salts of lithium, beryllium, thorium and uranium ?

Last Answer : Molten salt breeder reactor.

Reactors in commercial nuclear power plants in the U.S. are often referred to as thermal reactors. A thermal reactor uses: w) fissionable plutonium-239 as fuel. x) a relatively low heat output. y) neutrons moderated to relatively low energies. z) liquid sodium as a coolant.

Description : Reactors in commercial nuclear power plants in the U.S. are often referred to as thermal reactors. A thermal reactor uses: w) fissionable plutonium-239 as fuel. x) a relatively low heat output. y) neutrons moderated to relatively low energies. z) liquid sodium as a coolant.

Last Answer : ANSWER: Y -- NEUTRONS MODERATED TO RELATIVELY LOW ENERGIES.

The part of a nuclear power plant that prevents thermal pollution of lakes or rivers is the: w) reactor x) coolant/moderator y) cooling tower z) control rod

Description : The part of a nuclear power plant that prevents thermal pollution of lakes or rivers is the: w) reactor x) coolant/moderator y) cooling tower z) control rod

Last Answer : ANSWER: Y -- COOLING TOWER