Pressure in a Pressurised Water Reactor (PWR) is used for (A) Maintaining constant pressure in the primary cooling circuit under varying loads (B) Superheating the steam (C) Pressurising the water in the primary coolant circuit (D) None of these

Pressure in a Pressurised Water Reactor (PWR) is used for
(A) Maintaining constant pressure in the primary cooling circuit under
varying loads
(B) Superheating the steam
(C) Pressurising the water in the primary coolant circuit
(D) None of these
by

1 Answer

Answer :

(A) Maintaining constant pressure in the primary cooling circuit under
varying loads
by

Related questions

Coolant present in the primary circuit of a pressurised water reactor is high pressure (A) Sub cooled water (B) Saturated water (C) Superheated steam (D) Saturated steam

Description : Coolant present in the primary circuit of a pressurised water reactor is high pressure (A) Sub cooled water (B) Saturated water (C) Superheated steam (D) Saturated steam

Last Answer : (B) Saturated wate

In a pressurised water reactor (PWR), the (A) Fuel is natural uranium and heavy water acts both as moderator & coolant (B) Coolant water boils in the core of the reactor (C) Coolant water is pressurised to prevent bulk boiling of water in the core (D) Use of moderator is not required

Description : In a pressurised water reactor (PWR), the (A) Fuel is natural uranium and heavy water acts both as moderator & coolant (B) Coolant water boils in the core of the reactor (C) Coolant water is pressurised to prevent bulk boiling of water in the core (D) Use of moderator is not required

Last Answer : (C) Coolant water is pressurised to prevent bulk boiling of water in the core

A pressurised water reactor (PWR) uses pressurised water as a (A) Coolant (B) Working fluid in power turbine (C) Moderator (D) None of these

Description : A pressurised water reactor (PWR) uses pressurised water as a (A) Coolant (B) Working fluid in power turbine (C) Moderator (D) None of these

Last Answer : (A) Coolant

Heavy water is used as a moderator in a (A) Pressurised water reactor (PWR) (B) Boiling water reactor (BWR) (C) Candu reactor (D) Molten sodium cooled reactor

Description : Heavy water is used as a moderator in a (A) Pressurised water reactor (PWR) (B) Boiling water reactor (BWR) (C) Candu reactor (D) Molten sodium cooled reactor

Last Answer : (C) Candu reactor

A boiling water reactor is the one, in which the (A) Coolant water is allowed to boil in the core of the reactor (B) Coolant water, after being heated in the reactor core, generates steam in a boiler (C) Pressurised water is pumped into the core (D) Fuel and the coolant are thoroughly mixed to form a homogeneous solution

Description : A boiling water reactor is the one, in which the (A) Coolant water is allowed to boil in the core of the reactor (B) Coolant water, after being heated in the reactor core, generates steam ... water is pumped into the core (D) Fuel and the coolant are thoroughly mixed to form a homogeneous solution

Last Answer : (A) Coolant water is allowed to boil in the core of the reactor

Secondary cooling circuit is a must in molten sodium cooled fast breeder reactor for (A) Achieving high degree of superheat in the steam (B) Faster heat removal rate from the core(C) Lowering the coolant circulation pressure(D) Avoiding the mixing of water with radioactive sodium, as it may causeexplosion

Description : Secondary cooling circuit is a must in molten sodium cooled fast breeder reactor for (A) Achieving high degree of superheat in the steam (B) Faster heat removal rate from the core (C) ... circulation pressure (D) Avoiding the mixing of water with radioactive sodium, as it may cause explosion

Last Answer : (D) Avoiding the mixing of water with radioactive sodium, as it may cause explosion

Which of the following is a device used on a tractor or stationary engine for maintaining nearly constant engine speed under varying loads? 1. Volatility of fuel 2. Governor 3. Pre-ignition 4. carburetor

Description : Which of the following is a device used on a tractor or stationary engine for maintaining nearly constant engine speed under varying loads? 1. Volatility of fuel 2. Governor 3. Pre-ignition 4. carburetor

Last Answer : <!-- [if !supportLists] -->1.   <!-- [endif] -->ans 2  

An ideal coolant for a nuclear reactor should (A) Be a good absorber of neutrons (B) Be capable of attaining high temperature, only when it is pressurised (C) Have high density, but low heat transfer co-efficient (D) Be free from radiation damage and non-corrosive

Description : An ideal coolant for a nuclear reactor should (A) Be a good absorber of neutrons (B) Be capable of attaining high temperature, only when it is pressurised (C) Have high density, but low heat transfer co-efficient (D) Be free from radiation damage and non-corrosive

Last Answer : (D) Be free from radiation damage and non-corrosive

In which reactor the coolant and moderator are the same ? Pressurised water reactor.

Description : In which reactor the coolant and moderator are the same ? Pressurised water reactor.

Last Answer : Pressurised water reactor.

Superheating of steam is done at constant (A) Enthalpy (B) Entropy (C) Pressure (D) Volume

Description : Superheating of steam is done at constant (A) Enthalpy (B) Entropy (C) Pressure (D) Volume

Last Answer : Option C

Method of maintaining fires in furnace during standby periods without undue consumption of fuel is called (A) Back draughting (B) Banking (C) Under pressurising (D) None of these

Description : Method of maintaining fires in furnace during standby periods without undue consumption of fuel is called (A) Back draughting (B) Banking (C) Under pressurising (D) None of these

Last Answer : (B) Banking

Suggest the different methods to control the speed of rotation of steam turbine constant at all varying loads.

Description : Suggest the different methods to control the speed of rotation of steam turbine constant at all varying loads.

Last Answer : Following are the different methods to control the speed of rotation of steam turbine constant at all varying loads;  a) Throttle governing b) Nozzle control governing c) By pass governing d) Combine throttle and nozzle control governing e) Combine throttle and by pass governing

_________ nuclear reactor does not require a heat exchanger tosupply steam to power turbine.(A) Molten sodium cooled(B) Helium cooled(C) Boiling water(D) Pressurised water

Description : _________ nuclear reactor does not require a heat exchanger tosupply steam to power turbine. (A) Molten sodium cooled (B) Helium cooled (C) Boiling water (D) Pressurised water

Last Answer : (C) Boiling water

In the illustration, the contacts between terminals 26 and 27 should be closed when _________. EL-0046 A. using one generator in isochronous mode only B. using two or more generators in parallel only C. the prime mover speed is to remain constant through varying loads in parallel or single operation D. the circuit breaker is closed for that generator

Description : In the illustration, the contacts between terminals 26 and 27 should be closed when _________. EL-0046 A. using one generator in isochronous mode only B. using two or more generators in ... through varying loads in parallel or single operation D. the circuit breaker is closed for that generator

Last Answer : Answer: C

Water is a better coolant than a gas (like CO2 , He, N2 etc.), because it (A) Is a better neutron moderator as well (B) Require comparatively smaller pumps and heat exchanger for a given heat transfer rate (C) Has a better heat transfer characteristics, and it can be pressurised to attain a high temperature (D) All (A), (B) and (C)

Description : Water is a better coolant than a gas (like CO2 , He, N2 etc.), because it (A) Is a better neutron moderator as well (B) Require comparatively smaller pumps and heat exchanger for a given heat transfer rate ... , and it can be pressurised to attain a high temperature (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which section of the circuit is responsible for maintaining a nearly constant voltage for all loads within its operating range? EL-0085 A. I B. II C. III D. IV

Description : Which section of the circuit is responsible for maintaining a nearly constant voltage for all loads within its operating range? EL-0085 A. I B. II C. III D. IV

Last Answer : Answer: D

Coolant used in a boiling water reactor is (A) Hydrogen gas (B) Water (C) Steam (D) A mixture of water & steam

Description : Coolant used in a boiling water reactor is (A) Hydrogen gas (B) Water (C) Steam (D) A mixture of water & steam

Last Answer : (D) A mixture of water & steam

Which of the following nuclear reactors is the most efficient thermodynamically while operating between the same temperature and pressure limits of the reactor? (A) Molten sodium cooled (B) CO2 gas cooled (C) Pressurised water (D) Boiling water

Description : Which of the following nuclear reactors is the most efficient thermodynamically while operating between the same temperature and pressure limits of the reactor? (A) Molten sodium cooled (B) CO2 gas cooled (C) Pressurised water (D) Boiling water

Last Answer : (D) Boiling water

The part of a nuclear power plant that prevents thermal pollution of lakes or rivers is the: w) reactor x) coolant/moderator y) cooling tower z) control rod

Description : The part of a nuclear power plant that prevents thermal pollution of lakes or rivers is the: w) reactor x) coolant/moderator y) cooling tower z) control rod

Last Answer : ANSWER: Y -- COOLING TOWER

On the pressure-enthalpy diagram, condensation and de-superheating is represented by a horizontal line because theprocess (a) takes place at constant pressure (b) takes place at constant temperature (c) takes place at constant entropy (d) takes place at constant enthalpy

Description : On the pressure-enthalpy diagram, condensation and de-superheating is represented by a horizontal line because theprocess (a) takes place at constant pressure (b) takes place at constant temperature (c) takes place at constant entropy (d) takes place at constant enthalpy

Last Answer : Ans: a

Nuclear power reactor located at Tarapur is of __________ type. (A) Fast breeder (B) Pressurised water (C) Boiling water (D) Gas cooled

Description : Nuclear power reactor located at Tarapur is of __________ type. (A) Fast breeder (B) Pressurised water (C) Boiling water (D) Gas cooled

Last Answer : (C) Boiling water

Which of the following types of nuclear reactors is most prone to radioactive hazards? (A) Pressurised water reactor (B) Gas cooled reactor (C) Molten sodium cooled reactor (D) Boiling water reactor

Description : Which of the following types of nuclear reactors is most prone to radioactive hazards? (A) Pressurised water reactor (B) Gas cooled reactor (C) Molten sodium cooled reactor (D) Boiling water reactor

Last Answer : (D) Boiling water reactor

Which of the following may not need a moderator? (A) Candu reactor (B) Fast breeder reactor (C) Homogeneous reactor (D) Pressurised water reactor

Description : Which of the following may not need a moderator? (A) Candu reactor (B) Fast breeder reactor (C) Homogeneous reactor (D) Pressurised water reactor

Last Answer : (B) Fast breeder reactor

Lurgi coal gasifier is a pressurised __________ bed reactor. (A) Moving (B) Fixed (C) Fluidised (D) Entrained

Description : Lurgi coal gasifier is a pressurised __________ bed reactor. (A) Moving (B) Fixed (C) Fluidised (D) Entrained

Last Answer : (A) Moving

. Lurgi coal gasifier is a pressurised __________ bed reactor. (A) Moving (B) Fixed (C) Fluidised (D) Entrained

Description : . Lurgi coal gasifier is a pressurised __________ bed reactor. (A) Moving (B) Fixed (C) Fluidised (D) Entrained

Last Answer : (A) Moving

What is the function of boiler? • To burn the fuel in a confined closed system With the supply of air • To generate steam in varying pressure • To generate steam at constant pressure • To produce flue gases by burning fuel at a given pressure

Description : What is the function of boiler? • To burn the fuel in a confined closed system With the supply of air • To generate steam in varying pressure • To generate steam at constant pressure • To produce flue gases by burning fuel at a given pressure

Last Answer : • To generate steam at constant pressure

Which reactor uses primary coolant as fluoride salts of lithium, beryllium, thorium and uranium ?

Description : Which reactor uses primary coolant as fluoride salts of lithium, beryllium, thorium and uranium ?

Last Answer : Molten salt breeder reactor.

Molten sodium (as a coolant in fast breeder reactor) (A) Can’t attain high temperature at normal pressure (B) Is not at all corrosive, even at a higher temperature (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water (D) None of these

Description : Molten sodium (as a coolant in fast breeder reactor) (A) Can’t attain high temperature at normal pressure (B) Is not at all corrosive, even at a higher temperature (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water (D) None of these

Last Answer : (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water

The preferred reacting system for oxidation of o-xylene to phthalic anhydride is (A) Jacketed liquid phase CSTR (B) Jacketed steam heated multitubular reactor (C) Multitubular reactor with cooling (D) Multistage multitubular reactor with interstage cooling

Description : The preferred reacting system for oxidation of o-xylene to phthalic anhydride is (A) Jacketed liquid phase CSTR (B) Jacketed steam heated multitubular reactor (C) Multitubular reactor with cooling (D) Multistage multitubular reactor with interstage cooling

Last Answer : (A) Jacketed liquid phase CSTR

Pressure of CO2 gas (which is a coolant) in the Calder-Hall nuclear reactor is __________ kgf/cm2 . (A) 0.2 (B) 7 (C) 35 (D) 50

Description : Pressure of CO2 gas (which is a coolant) in the Calder-Hall nuclear reactor is __________ kgf/cm2 . (A) 0.2 (B) 7 (C) 35 (D) 50

Last Answer : (B) 7

In a gas-liquid shell and tube heat exchanger, the(A) Presence of a non-condensable gas decreases the condensing film co￾efficient (B) Gases under high pressure are routed through the tube side, because high pressure gases are corrosive in nature (C) Gases to be heated/cooled is normally routed through the shell side, because the corrosion caused by the cooling water or steam condensate remain localised to the tubes (D) All 'a', 'b' & 'c'

Description : In a gas-liquid shell and tube heat exchanger, the (A) Presence of a non-condensable gas decreases the condensing film co￾efficient (B) Gases under high pressure are routed through the tube side, because high pressure ... water or steam condensate remain localised to the tubes (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Heavy water (D2O) in a nuclear reactor serves as a (A) Coolant (B) Moderator (C) Both (A) & (B) (D) Neutron absorber

Description : Heavy water (D2O) in a nuclear reactor serves as a (A) Coolant (B) Moderator (C) Both (A) & (B) (D) Neutron absorber

Last Answer : (C) Both (A) & (B)

A homogeneous reactor is the one, in which the (A) Fissile atoms are evenly distributed throughout the mass of nuclear reactor (B) Same substance (e.g. heavy water) is used as moderator & coolant (C) The fuel and the moderator is mixed to form a homogeneous material (D) All (A), (B) and (C)

Description : A homogeneous reactor is the one, in which the (A) Fissile atoms are evenly distributed throughout the mass of nuclear reactor (B) Same substance (e.g. heavy water) is used as moderator & coolant (C) The fuel and the moderator is mixed to form a homogeneous material (D) All (A), (B) and (C)

Last Answer : (C) The fuel and the moderator is mixed to form a homogeneous material

A fast breeder reactor employs (A) Graphite as moderator (B) Water as coolant (C) Molten sodium as coolant as well as moderator (D) U-235 as fuel

Description : A fast breeder reactor employs (A) Graphite as moderator (B) Water as coolant (C) Molten sodium as coolant as well as moderator (D) U-235 as fuel

Last Answer : (D) U-235 as fuel

Light water' used as a coolant in nuclear reactor is nothing but (A) Ordinary water (B) Mildly acidic (pH = 6) water (C) Mildly alkaline (pH = 8) water (D) None of these

Description : Light water' used as a coolant in nuclear reactor is nothing but (A) Ordinary water (B) Mildly acidic (pH = 6) water (C) Mildly alkaline (pH = 8) water (D) None of these

Last Answer : (A) Ordinary water

Coolant used in a fast breeder reactor is (A) Molten sodium (B) Heavy water (C) Ordinary water (D) Helium

Description : Coolant used in a fast breeder reactor is (A) Molten sodium (B) Heavy water (C) Ordinary water (D) Helium

Last Answer : (A) Molten sodium

A heterogeneous reactor is the one, in which the moderator and the (A) Coolant are different materials (B) Coolant are present in different phases (e.g., heavy water and graphite) (C) Fuel are present in different phases (e.g. uranium and heavy water) (D) None of these

Description : A heterogeneous reactor is the one, in which the moderator and the (A) Coolant are different materials (B) Coolant are present in different phases (e.g., heavy water and graphite) (C) Fuel are present in different phases (e.g. uranium and heavy water) (D) None of these

Last Answer : (C) Fuel are present in different phases (e.g. uranium and heavy water

Which of the following has the lowest Prandtl number? (A) Molten sodium (a coolant used in fast breeder reactor) (B) Water (C) Transformer oil (D) Dilute H2SO4

Description : Which of the following has the lowest Prandtl number? (A) Molten sodium (a coolant used in fast breeder reactor) (B) Water (C) Transformer oil (D) Dilute H2SO4

Last Answer : (A) Molten sodium (a coolant used in fast breeder reactor)

Corresponding to Fig. (3), the loading on the portion AD of the beam will be (a) Uniformly distributed load (b) Uniformly varying load (c) Point loads (d) Cannot be said

Description : Corresponding to Fig. (3), the loading on the portion AD of the beam will be (a) Uniformly distributed load (b) Uniformly varying load (c) Point loads (d) Cannot be said

Last Answer : (a) Uniformly distributed load

When the bending moment is parabolic curve between two points, it indicates that there is (a) No loading between the two points (b) Point loads between the two points (c) U.D.L. between the two points (d) Uniformly varying load between the two points

Description : When the bending moment is parabolic curve between two points, it indicates that there is (a) No loading between the two points (b) Point loads between the two points (c) U.D.L. between the two points (d) Uniformly varying load between the two points

Last Answer : (c) U.D.L. between the two points

Which of the following gases has very high neutron capture cross￾section, making it unsuitable as a coolant in nuclear reactor? (A) N2 (B) He (C) CO2 (D) H2

Description : Which of the following gases has very high neutron capture cross￾section, making it unsuitable as a coolant in nuclear reactor? (A) N2 (B) He (C) CO2 (D) H2

Last Answer : (A) N2

__________ gas is normally not used as a coolant in a nuclear reactor, because of its high neutron capture cross-section. (A) Nitrogen (B) Hydrogen (C) Helium (D) Carbon dioxide

Description : __________ gas is normally not used as a coolant in a nuclear reactor, because of its high neutron capture cross-section. (A) Nitrogen (B) Hydrogen (C) Helium (D) Carbon dioxide

Last Answer : (A) Nitrogen

Thermal shield is used in high powered nuclear reactors to (A) Protect the walls of the reactor from radiation damageB) Absorb the fast neutrons(C) Slow down the secondary neutrons(D) Protect the fuel element from coming in contact with the coolant

Description : Thermal shield is used in high powered nuclear reactors to (A) Protect the walls of the reactor from radiation damage B) Absorb the fast neutrons (C) Slow down the secondary neutrons (D) Protect the fuel element from coming in contact with the coolant

Last Answer : (A) Protect the walls of the reactor from radiation damage

A fast breeder reactor (A) Utilises fast neutrons for causing fission (B) Converts fertile material (e.g., U-238) into fissile material (Pu-239) (C) Normally employs molten sodium as coolant (D) All (A), (B) and (C)

Description : A fast breeder reactor (A) Utilises fast neutrons for causing fission (B) Converts fertile material (e.g., U-238) into fissile material (Pu-239) (C) Normally employs molten sodium as coolant (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Fast breeder test reactor at Kalpakkam (INDIA) is designed for using (A) Thorium as a fertile material (B) U-238 as a fertile material (C) Helium as a coolant (D) Uranium ore directly as a fuel

Description : Fast breeder test reactor at Kalpakkam (INDIA) is designed for using (A) Thorium as a fertile material (B) U-238 as a fertile material (C) Helium as a coolant (D) Uranium ore directly as a fuel

Last Answer : (A) Thorium as a fertile material

In a homogeneous nuclear reactor, the __________ are mixed together. (A) Fuel & coolant (B) Fuel & moderator (C) Coolant & moderator (D) None of these

Description : In a homogeneous nuclear reactor, the __________ are mixed together. (A) Fuel & coolant (B) Fuel & moderator (C) Coolant & moderator (D) None of these

Last Answer : (B) Fuel & moderator

Molten sodium is used as a coolant in a fast breeder reactor, because of its (A) Excellent moderating properties (B) Neutron breeding capability (C) Faster heat removal capability from the core (D) Capability to increase the reaction rate in the core

Description : Molten sodium is used as a coolant in a fast breeder reactor, because of its (A) Excellent moderating properties (B) Neutron breeding capability (C) Faster heat removal capability from the core (D) Capability to increase the reaction rate in the core

Last Answer : (C) Faster heat removal capability from the core

Use of molten metal as a coolant in fast breeder reactor helps in (A) Rapid heat transfer from the core (B) Accelerating the reaction rate in the core (C) Breeding neutrons (D) Accelerating the neutrons

Description : Use of molten metal as a coolant in fast breeder reactor helps in (A) Rapid heat transfer from the core (B) Accelerating the reaction rate in the core (C) Breeding neutrons (D) Accelerating the neutrons

Last Answer : (A) Rapid heat transfer from the core

Liquid metal (e.g., molten sodium) is preferred as a coolant in case of a/an __________ reactor. (A) Homogeneous (B) Graphite moderated (C) Fast breeder (D) Enriched uranium (3% U-235) fuelled

Description : Liquid metal (e.g., molten sodium) is preferred as a coolant in case of a/an __________ reactor. (A) Homogeneous (B) Graphite moderated (C) Fast breeder (D) Enriched uranium (3% U-235) fuelled

Last Answer : (C) Fast breeder

Which is used as a coolant in nuclear reactor due to its high capture cross-section? (A) H2 (B) N2 (C) He (D) CO2

Description : Which is used as a coolant in nuclear reactor due to its high capture cross-section? (A) H2 (B) N2 (C) He (D) CO2

Last Answer : (A) H2