Components, having widely different boiling point in a binary mixture, can be separated using __________ distillation. (A) Molecular (B) Extractive (C) Steam (D) Simple

Components, having widely different boiling point in a binary mixture,
can be separated using __________ distillation.
(A) Molecular
(B) Extractive
(C) Steam
(D) Simple
by

1 Answer

Answer :

(D) Simple
by

Related questions

In case of __________ distillation, a solvent is added to alter the relative volatility of the mixture to be separated. (A) Molecular (B) Azeotropic (C) Extractive

Description : In case of __________ distillation, a solvent is added to alter the relative volatility of the mixture to be separated. (A) Molecular (B) Azeotropic (C) Extractive

Last Answer : (C) Extractive

A binary mixture of benzene and cyclohexane is separated by (A) Flash vaporisation (B) Extractive distillation (C) Solvent extraction (D) Ordinary distillation

Description : A binary mixture of benzene and cyclohexane is separated by (A) Flash vaporisation (B) Extractive distillation (C) Solvent extraction (D) Ordinary distillation

Last Answer : (B) Extractive distillation

Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation (B) A sharp decrease in pressure drop is an indication of flooding in a distillation coloumn (C) Solvent used in extractive distillation should be of high volatility (D) Flash distillation is suitable for separating components which have very close boiling temperature

Description : Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of ... Flash distillation is suitable for separating components which have very close boiling temperature

Last Answer : (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation

Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if distilled directly at atmospheric pressure (C) Material cannot be distilled by indirect heating even under low pressure, because of the high boiling temperature (D) Material to be distilled is thermally unstable or has the tendency to react with other components associated with it, at the boiling temperature

Description : Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if ... unstable or has the tendency to react with other components associated with it, at the boiling temperature

Last Answer : (A) Azeotropic mixture is to be separated and the final product is miscible with water

Alcohol is dehydrated using __________ distillation. (A) Extractive (B) Azeotropic (C) Steam (D) Molecular

Description : Alcohol is dehydrated using __________ distillation. (A) Extractive (B) Azeotropic (C) Steam (D) Molecular

Last Answer : (B) Azeotropic

Solvent used in extractive distillation (A) Is of low volatility (B) Forms a low boiling azeotrope (C) Forms a high boiling azeotrope (D) Does not alter the relative volatility of the original components

Description : Solvent used in extractive distillation (A) Is of low volatility (B) Forms a low boiling azeotrope (C) Forms a high boiling azeotrope (D) Does not alter the relative volatility of the original components

Last Answer : (B) Forms a low boiling azeotrope

For a binary mixture with low relative volatility, (A) Use steam distillation (B) Use molecular distillation (C) Use high pressure distillation (D) An azeotrope may be formed during distillation

Description : For a binary mixture with low relative volatility, (A) Use steam distillation (B) Use molecular distillation (C) Use high pressure distillation (D) An azeotrope may be formed during distillation

Last Answer : (D) An azeotrope may be formed during distillation

Rose oil is extracted from rose leaves using __________ distillation. (A) High pressure (B) Low pressure (C) Extractive (D) Steam

Description : Rose oil is extracted from rose leaves using __________ distillation. (A) High pressure (B) Low pressure (C) Extractive (D) Steam

Last Answer : (D) Steam

When the mixture to be distilled has a very high boiling point and the product material is heat sensitive, the separation technique to be used is __________ distillation. (A) Continuous (B) Steam (C) Azeotropic (D) None of these

Description : When the mixture to be distilled has a very high boiling point and the product material is heat sensitive, the separation technique to be used is __________ distillation. (A) Continuous (B) Steam (C) Azeotropic (D) None of these

Last Answer : (B) Steam

Essential oils are usually obtained using (A) Steam distillation (B) Extractive distillation (C) Solvent extraction (D) Leaching

Description : Essential oils are usually obtained using (A) Steam distillation (B) Extractive distillation (C) Solvent extraction (D) Leaching

Last Answer : (D) Leaching

Penicillin is separated from fermented broth by (A) Extraction with amyl or butyl acetate (B) Ternary Azeotropic distillation (C) Evaporator in calandria (D) Extractive distillation

Description : Penicillin is separated from fermented broth by (A) Extraction with amyl or butyl acetate (B) Ternary Azeotropic distillation (C) Evaporator in calandria (D) Extractive distillation

Last Answer : (A) Extraction with amyl or butyl acetate

Oxygen is separated by distillation from air after its liquefaction. The boiling point of oxygen is about __________ °C. (A) -83 (B) -183 (C) -196 (D) -218

Description : Oxygen is separated by distillation from air after its liquefaction. The boiling point of oxygen is about __________ °C. (A) -83 (B) -183 (C) -196 (D) -218

Last Answer : (B) -183

Extraction of coffee from its seed is done by (A) Liquid-liquid extraction (B) Leaching (C) Extractive distillation (D) Steam distillation

Description : Extraction of coffee from its seed is done by (A) Liquid-liquid extraction (B) Leaching (C) Extractive distillation (D) Steam distillation

Last Answer : (B) Leaching

Solvent used in extractive distillation (A) Changes the relative volatility of the original components (B) Should be of high volatility (C) Should form azeotropes with the original components (D) All (A), (B) and (C)

Description : Solvent used in extractive distillation (A) Changes the relative volatility of the original components (B) Should be of high volatility (C) Should form azeotropes with the original components (D) All (A), (B) and (C)

Last Answer : (A) Changes the relative volatility of the original components

In extractive distillation, solvent is (A) Added to alter the relative volatility of the mixture (B) Of high volatility (C) Present in overhead stream (D) Of high viscosity to give high tray efficiency

Description : In extractive distillation, solvent is (A) Added to alter the relative volatility of the mixture (B) Of high volatility (C) Present in overhead stream (D) Of high viscosity to give high tray efficiency

Last Answer : (A) Added to alter the relative volatility of the mixture

A liquid with high boiling point decomposes on simple distillation but it can be steam distilled for its purification .Explain how is it possible?

Description : A liquid with high boiling point decomposes on simple distillation but it can be steam distilled for its purification .Explain how is it possible?

Last Answer : In steam distillation boiling occurs when vapour pressure of organic compound & steam becomes equal to atmospheric pressure. As vapour pressure of water is higher than the organic liquid. ... organic liquid vaporizes at a temperature below its boiling point in steam distillation without decomposing.

Consider the following statements: 1. Carbyne is an allotrope of carbon. 2. Gasoline, used as a fuel in motor vehicles is a mixture of petrol and alcohol. 3. Petroleum is also known as 'liquid gold'. 4. The various components of crude oil are separated by fractional distillation. The correct statements are: (a) 1, 2 and 4 only (b) 1, 3 and 4 only (c) 1, 2, 3 and 4 (d) 1, 2 and 3 only

Description : Consider the following statements: 1. Carbyne is an allotrope of carbon. 2. Gasoline, used as a fuel in motor vehicles is a mixture of petrol and alcohol. 3. Petroleum is also known as 'liquid gold'. 4. The various components of crude ... (b) 1, 3 and 4 only (c) 1, 2, 3 and 4 (d) 1, 2 and 3 only

Last Answer : Ans:(b)

Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is important in problems involving gas absorption without chemical reaction (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion (D) Total reflux in case of distillation operation requires infinite number of plates for a binary system separation

Description : Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is ... reflux in case of distillation operation requires infinite number of plates for a binary system separation

Last Answer : (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion

According to the Fenske equation, what will be the minimum number of plates required in a distillation column to separate an equimolar binary mixture of components A and B into an overhead fraction containing 99 mol% A and a bottom fraction containing 98 mol% B ? Assume that relative volatility (αAB = 2) does not change appreciably in the column. (A) 5 (B) 9 (C) 12 (D) 28

Description : According to the Fenske equation, what will be the minimum number of plates required in a distillation column to separate an equimolar binary mixture of components A and B into an overhead fraction containing 99 mol% A and a ... in the column. (A) 5 (B) 9 (C) 12 (D) 28

Last Answer : (C) 12

Crude oil is separated into its components by: w) chemical reaction x) simple distillation y) fractional distillation z) settling

Description : Crude oil is separated into its components by: w) chemical reaction x) simple distillation y) fractional distillation z) settling

Last Answer : ANSWER: Y -- FRACTIONAL DISTILLATION 

An Azeotropic mixture is a __________ mixture. (A) Binary (B) Ternary (C) Constant boiling point (D) None of these

Description : An Azeotropic mixture is a __________ mixture. (A) Binary (B) Ternary (C) Constant boiling point (D) None of these

Last Answer : (C) Constant boiling point

Two liquids (A)and(B)are separated by fractional distillation, the boiling point of (A) is less than (B).which liquid comes out first in distillate? Explain.

Description : Two liquids (A)and(B)are separated by fractional distillation, the boiling point of (A) is less than (B).which liquid comes out first in distillate? Explain.

Last Answer : The liquid (a) comes out first in distillate. On boiling the vapours of lower boiling component are formed first.

Solvent naphtha' used mostly as a solvent in paints and perfumery is produced by the __________ of virgin naphtha into small boiling range cuts. (A) Steam reforming (B) Distillation (C) Desulphurisation (D) None of these

Description : Solvent naphtha' used mostly as a solvent in paints and perfumery is produced by the __________ of virgin naphtha into small boiling range cuts. (A) Steam reforming (B) Distillation (C) Desulphurisation (D) None of these

Last Answer : (B) Distillation

Flash distillation is suitable for the separation of components (A) Having very close boiling points (B) Which form maximum boiling azeotrope (C) Having very wide boiling points (D) Which form minimum boiling azeotrope

Description : Flash distillation is suitable for the separation of components (A) Having very close boiling points (B) Which form maximum boiling azeotrope (C) Having very wide boiling points (D) Which form minimum boiling azeotrope

Last Answer : (C) Having very wide boiling points

steam distillation, the (A) Temperature is 100°C(B) Temperature is more than 100° C (C) Product must be immiscible with water (D) Temperature is higher than the boiling point of either component

Description : steam distillation, the (A) Temperature is 100°C(B) Temperature is more than 100° C (C) Product must be immiscible with water (D) Temperature is higher than the boiling point of either component

Last Answer : (C) Product must be immiscible with water

Pick out the wrong statement: (A) Reboiler is not used in open steam distillation (B) The separation of solutes of different molecular sizes in a liquid solution by use of a suitable membrane is called dialysis (C) Freeze drying is used for the drying of fish (D) Fenske-Underwood equation is used for calculating theoretical number of plates in a distillation column at normal operating reflux condition

Description : Pick out the wrong statement: (A) Reboiler is not used in open steam distillation (B) The separation of solutes of different molecular sizes in a liquid solution by use of a ... is used for calculating theoretical number of plates in a distillation column at normal operating reflux condition

Last Answer : (D) Fenske-Underwood equation is used for calculating theoretical number of plates in a distillation column at normal operating reflux condition

The boiling points of pure components of a binary system __________ with increase in total pressure of the system. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease, depends on the system

Description : The boiling points of pure components of a binary system __________ with increase in total pressure of the system. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease, depends on the system

Last Answer : (B) Increases

Explain ,why an organic liquid vapourises at a temperature below its boiling point in steam distillation?

Description : Explain ,why an organic liquid vapourises at a temperature below its boiling point in steam distillation?

Last Answer : Because for boiling to occur vapour pressure of organic compound & steam should be equal to atmospheric pressure. As vapour pressure of water is higher than organic liquid. Therefore, organic liquid vaporizes at a temperature below its boiling point in steam distillation .

Fenske equation for determining the minimum number of theoretical stages in distillation column holds good, when the (A) Relative volatility is reasonably constant (B) Mixture (to be separated) shows negative deviation from ideality (C) Mixture (to be separated) shows positive deviation from ideality (D) Multi-component distillation is involved

Description : Fenske equation for determining the minimum number of theoretical stages in distillation column holds good, when the (A) Relative volatility is reasonably constant (B) Mixture (to be separated) ... (to be separated) shows positive deviation from ideality (D) Multi-component distillation is involved

Last Answer : (A) Relative volatility is reasonably constant

Flash distillation is suitable for separating the constituents of a binary system, which (A) Form minimum boiling azeotrope (B) Have very wide boiling points (C) Have very close boiling points (D) Form constant boiling azeotrope

Description : Flash distillation is suitable for separating the constituents of a binary system, which (A) Form minimum boiling azeotrope (B) Have very wide boiling points (C) Have very close boiling points (D) Form constant boiling azeotrope

Last Answer : (B) Have very wide boiling points

Products drawn from the top to bottom of the crude oil distillation column has progressively increasing (A) Boiling points (B) Molecular weight (C) C/H ratio (D) All (A), (B) and (C)

Description : Products drawn from the top to bottom of the crude oil distillation column has progressively increasing (A) Boiling points (B) Molecular weight (C) C/H ratio (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

ADDUCTS' and 'CLATHRATES' are used in case of (A) Extractive distillation (B) Crystallisation (C) Absorption (D) None of these

Description : ADDUCTS' and 'CLATHRATES' are used in case of (A) Extractive distillation (B) Crystallisation (C) Absorption (D) None of these

Last Answer : (B) Crystallisation

Polar organic compounds are normally used as separating agents for the azeotropic and extractive distillation. Which of the following is the most important factor to be considered for the choice of the separating agent for extractive distillation? (A) Cost (B) Availability(C) Toxicity(D) Selectivity

Description : Polar organic compounds are normally used as separating agents for the azeotropic and extractive distillation. Which of the following is the most important factor to be considered for the choice of the separating agent ... ? (A) Cost (B) Availability (C) Toxicity (D) Selectivity

Last Answer : (D) Selectivity

Duhring's plot' is of use in (A) Extractive distillation (B) Evaporation

Description : Duhring's plot' is of use in (A) Extractive distillation (B) Evaporation

Last Answer : (B) Evaporation

Black liquor is converted into white liquor by (A) Evaporation and burning the concentrate followed by causticisation of products (B) Multi-effect evaporation only (C) Selective liquid extraction (D) Extractive distillation

Description : Black liquor is converted into white liquor by (A) Evaporation and burning the concentrate followed by causticisation of products (B) Multi-effect evaporation only (C) Selective liquid extraction (D) Extractive distillation

Last Answer : (A) Evaporation and burning the concentrate followed by causticisation of products

Glycerine is recovered from lye by (A) Evaporation followed by vacuum distillation (B) Liquid extraction technique (C) Extractive distillation technique (D) None of these

Description : Glycerine is recovered from lye by (A) Evaporation followed by vacuum distillation (B) Liquid extraction technique (C) Extractive distillation technique (D) None of these

Last Answer : (A) Evaporation followed by vacuum distillation

Steam distillation is used for separation of high boiling (A) Substances from non-volatile impurities (B) Volatile impurity from still higher boiling substances (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Steam distillation is used for separation of high boiling (A) Substances from non-volatile impurities (B) Volatile impurity from still higher boiling substances (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

McCabe-Thiele method of binary distillation does not assume that the (A) Sensible heat changes are negligible compared with latent heat changes (B) Molar latent heats of all components are equal (C) Heat of mixing is negligible (D) None of these

Description : McCabe-Thiele method of binary distillation does not assume that the (A) Sensible heat changes are negligible compared with latent heat changes (B) Molar latent heats of all components are equal (C) Heat of mixing is negligible (D) None of these

Last Answer : (D) None of these

A mixture of water and alcohol can be separated by – (1) Filtration (2) Evaporation (3) Decantation (4) Distillation

Description : A mixture of water and alcohol can be separated by – (1) Filtration (2) Evaporation (3) Decantation (4) Distillation

Last Answer : (4) Distillation Explanation: A mixture of water and alcohol is separated by the process of distillation. At 780C, alcohol starts to vaporize. The vapours are condensed in the condenser and alcohol is collected in the receiver.

Iodine can be separated from a mixture of Iodine and Potassium Chloride by - (1) Filtration (2) Sublimation (3) Distillation (4) Sedimentation

Description : Iodine can be separated from a mixture of Iodine and Potassium Chloride by - (1) Filtration (2) Sublimation (3) Distillation (4) Sedimentation

Last Answer : (2) Sublimation Explanation: Iodine can be separated from a mixture of Iodine and Potassium Chloride by Sublimation. Sublimation is the transition of a substance directly from the solid to the gas phase, without passing through the intermediate liquid phase.

Iodine can be separated from a mixture of Iodine and Potassium Chloride by – (1) sedimentation (2) filtration (3) sublimation (4) distillation

Description : Iodine can be separated from a mixture of Iodine and Potassium Chloride by – (1) sedimentation (2) filtration (3) sublimation (4) distillation

Last Answer : (3) sublimation Explanation: Iodine is well known to sublime (change from solid to gas without becoming liquid in between) when heated. However sodium chloride has a melting point much higher ... by using a sublimation apparatus, with solid iodine collected by condensation on a cold surface.

Water can be separated from alcohol water mixture by – (1) decantation (2) evaporation (3) distillation (4) sublimation

Description : Water can be separated from alcohol water mixture by – (1) decantation (2) evaporation (3) distillation (4) sublimation

Last Answer : (3) distillation Explanation: Distillation is a method of separating mixtures based on differences in volatilities of components in a boiling liquid mixture. Distillation is a unit operation, or a ... is distilled to separate its components- notably oxygen, nitrogen, and argon- for industrial use.

A mixture of water and alcohol can be separated by - (1) Filtration (2) Evaporation (3) Distillation (4) Decantation

Description : A mixture of water and alcohol can be separated by - (1) Filtration (2) Evaporation (3) Distillation (4) Decantation

Last Answer : (3) Distillation Explanation: Simple distillation is a procedure by which two liquids with different boiling points can be separated.

A mixture of water and alcohol can be separated by (1) Filtration (2) Evaporation (3) Decantation (4) Distillation

Description : A mixture of water and alcohol can be separated by (1) Filtration (2) Evaporation (3) Decantation (4) Distillation

Last Answer : Distillation

Iodine can be separated from a mixture of Iodine and Potassium Chloride by (1) sedimentation (2) filtration (3) sublimation (4) distillation

Description : Iodine can be separated from a mixture of Iodine and Potassium Chloride by (1) sedimentation (2) filtration (3) sublimation (4) distillation

Last Answer : sublimation

Water can be separated from alcohol water mixture by (1) decantation (2) evaporation (3) distillation (4) sublimation

Description : Water can be separated from alcohol water mixture by (1) decantation (2) evaporation (3) distillation (4) sublimation

Last Answer : distillation

The-relative volatility for separation of a non-ideal binary mixture by distillation should be (A) 0 (B) 1 (C) > 1 (D) < 1

Description : The-relative volatility for separation of a non-ideal binary mixture by distillation should be (A) 0 (B) 1 (C) > 1 (D) < 1

Last Answer : (C) > 1

Pick out the wrong statement. (A) Constant pressure distillation cannot separate an Azeotropic mixture (B) Relative volatility of a binary mixture changes appreciably with the minor change in temperature (C) The relative volatility of a binary mixture at Azeotropic composition is unity (D) Flash distillation is practised on wide spread scale in petroleum refinery

Description : Pick out the wrong statement. (A) Constant pressure distillation cannot separate an Azeotropic mixture (B) Relative volatility of a binary mixture changes appreciably with the minor change in ... unity (D) Flash distillation is practised on wide spread scale in petroleum refinery

Last Answer : (B) Relative volatility of a binary mixture changes appreciably with the minor change in temperature

Steady state equimolal counter diffusion is encountered in (A) Separation of a binary mixture by distillation (B) Absorption of NH3 from air by water (C) All liquid-liquid diffusion systems (D) All liquid-solid diffusion systems

Description : Steady state equimolal counter diffusion is encountered in (A) Separation of a binary mixture by distillation (B) Absorption of NH3 from air by water (C) All liquid-liquid diffusion systems (D) All liquid-solid diffusion systems

Last Answer : (A) Separation of a binary mixture by distillation

For a binary mixture distillation process, the degree of freedom is 2. However, if the pressure is fixed in this process, the number of independent variables in this process will be (A) 1 (B) 0 (C) 2 (D) 3

Description : For a binary mixture distillation process, the degree of freedom is 2. However, if the pressure is fixed in this process, the number of independent variables in this process will be (A) 1 (B) 0 (C) 2 (D) 3

Last Answer : (A) 1