_________ nuclear reactor does not require a heat exchanger tosupply steam to power turbine.(A) Molten sodium cooled(B) Helium cooled(C) Boiling water(D) Pressurised water

_________ nuclear reactor does not require a heat exchanger tosupply steam to power turbine.
(A) Molten sodium cooled
(B) Helium cooled
(C) Boiling water
(D) Pressurised water
by

1 Answer

Answer :

(C) Boiling water
by

Related questions

Which of the following types of nuclear reactors is most prone to radioactive hazards? (A) Pressurised water reactor (B) Gas cooled reactor (C) Molten sodium cooled reactor (D) Boiling water reactor

Description : Which of the following types of nuclear reactors is most prone to radioactive hazards? (A) Pressurised water reactor (B) Gas cooled reactor (C) Molten sodium cooled reactor (D) Boiling water reactor

Last Answer : (D) Boiling water reactor

Which of the following nuclear reactors is the most efficient thermodynamically while operating between the same temperature and pressure limits of the reactor? (A) Molten sodium cooled (B) CO2 gas cooled (C) Pressurised water (D) Boiling water

Description : Which of the following nuclear reactors is the most efficient thermodynamically while operating between the same temperature and pressure limits of the reactor? (A) Molten sodium cooled (B) CO2 gas cooled (C) Pressurised water (D) Boiling water

Last Answer : (D) Boiling water

Heavy water is used as a moderator in a (A) Pressurised water reactor (PWR) (B) Boiling water reactor (BWR) (C) Candu reactor (D) Molten sodium cooled reactor

Description : Heavy water is used as a moderator in a (A) Pressurised water reactor (PWR) (B) Boiling water reactor (BWR) (C) Candu reactor (D) Molten sodium cooled reactor

Last Answer : (C) Candu reactor

Nuclear power reactor located at Tarapur is of __________ type. (A) Fast breeder (B) Pressurised water (C) Boiling water (D) Gas cooled

Description : Nuclear power reactor located at Tarapur is of __________ type. (A) Fast breeder (B) Pressurised water (C) Boiling water (D) Gas cooled

Last Answer : (C) Boiling water

Secondary cooling circuit is a must in molten sodium cooled fast breeder reactor for (A) Achieving high degree of superheat in the steam (B) Faster heat removal rate from the core(C) Lowering the coolant circulation pressure(D) Avoiding the mixing of water with radioactive sodium, as it may causeexplosion

Description : Secondary cooling circuit is a must in molten sodium cooled fast breeder reactor for (A) Achieving high degree of superheat in the steam (B) Faster heat removal rate from the core (C) ... circulation pressure (D) Avoiding the mixing of water with radioactive sodium, as it may cause explosion

Last Answer : (D) Avoiding the mixing of water with radioactive sodium, as it may cause explosion

Coolant present in the primary circuit of a pressurised water reactor is high pressure (A) Sub cooled water (B) Saturated water (C) Superheated steam (D) Saturated steam

Description : Coolant present in the primary circuit of a pressurised water reactor is high pressure (A) Sub cooled water (B) Saturated water (C) Superheated steam (D) Saturated steam

Last Answer : (B) Saturated wate

A boiling water reactor is the one, in which the (A) Coolant water is allowed to boil in the core of the reactor (B) Coolant water, after being heated in the reactor core, generates steam in a boiler (C) Pressurised water is pumped into the core (D) Fuel and the coolant are thoroughly mixed to form a homogeneous solution

Description : A boiling water reactor is the one, in which the (A) Coolant water is allowed to boil in the core of the reactor (B) Coolant water, after being heated in the reactor core, generates steam ... water is pumped into the core (D) Fuel and the coolant are thoroughly mixed to form a homogeneous solution

Last Answer : (A) Coolant water is allowed to boil in the core of the reactor

Water is a better coolant than a gas (like CO2 , He, N2 etc.), because it (A) Is a better neutron moderator as well (B) Require comparatively smaller pumps and heat exchanger for a given heat transfer rate (C) Has a better heat transfer characteristics, and it can be pressurised to attain a high temperature (D) All (A), (B) and (C)

Description : Water is a better coolant than a gas (like CO2 , He, N2 etc.), because it (A) Is a better neutron moderator as well (B) Require comparatively smaller pumps and heat exchanger for a given heat transfer rate ... , and it can be pressurised to attain a high temperature (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following reactors is operated at high neutron flux and low power level? (A) Breeder reactor (B) Research reactor (C) Heterogeneous reactor (D) Liquid metal (e.g., molten sodium) cooled reactor

Description : Which of the following reactors is operated at high neutron flux and low power level? (A) Breeder reactor (B) Research reactor (C) Heterogeneous reactor (D) Liquid metal (e.g., molten sodium) cooled reactor

Last Answer : (B) Research reactor

A pressurised water reactor (PWR) uses pressurised water as a (A) Coolant (B) Working fluid in power turbine (C) Moderator (D) None of these

Description : A pressurised water reactor (PWR) uses pressurised water as a (A) Coolant (B) Working fluid in power turbine (C) Moderator (D) None of these

Last Answer : (A) Coolant

The type of pump used for the recirculation of molten sodium coolant in liquid metal cooled reactor is a/an __________ pump. (A) Electromagnetic (B) Reciprocating (C) Centrifugal (D) Volute

Description : The type of pump used for the recirculation of molten sodium coolant in liquid metal cooled reactor is a/an __________ pump. (A) Electromagnetic (B) Reciprocating (C) Centrifugal (D) Volute

Last Answer : (A) Electromagnetic

Coolant used in a fast breeder reactor is (A) Molten sodium (B) Heavy water (C) Ordinary water (D) Helium

Description : Coolant used in a fast breeder reactor is (A) Molten sodium (B) Heavy water (C) Ordinary water (D) Helium

Last Answer : (A) Molten sodium

An ideal coolant for a nuclear reactor should (A) Be a good absorber of neutrons (B) Be capable of attaining high temperature, only when it is pressurised (C) Have high density, but low heat transfer co-efficient (D) Be free from radiation damage and non-corrosive

Description : An ideal coolant for a nuclear reactor should (A) Be a good absorber of neutrons (B) Be capable of attaining high temperature, only when it is pressurised (C) Have high density, but low heat transfer co-efficient (D) Be free from radiation damage and non-corrosive

Last Answer : (D) Be free from radiation damage and non-corrosive

In a gas-liquid shell and tube heat exchanger, the(A) Presence of a non-condensable gas decreases the condensing film co￾efficient (B) Gases under high pressure are routed through the tube side, because high pressure gases are corrosive in nature (C) Gases to be heated/cooled is normally routed through the shell side, because the corrosion caused by the cooling water or steam condensate remain localised to the tubes (D) All 'a', 'b' & 'c'

Description : In a gas-liquid shell and tube heat exchanger, the (A) Presence of a non-condensable gas decreases the condensing film co￾efficient (B) Gases under high pressure are routed through the tube side, because high pressure ... water or steam condensate remain localised to the tubes (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Most commercial nuclear power plants worldwide are cooled by: w) sodium x) mercury y) helium z) water

Description : Most commercial nuclear power plants worldwide are cooled by: w) sodium x) mercury y) helium z) water

Last Answer : ANSWER: Z -- WATER

In a pressurised water reactor (PWR), the (A) Fuel is natural uranium and heavy water acts both as moderator & coolant (B) Coolant water boils in the core of the reactor (C) Coolant water is pressurised to prevent bulk boiling of water in the core (D) Use of moderator is not required

Description : In a pressurised water reactor (PWR), the (A) Fuel is natural uranium and heavy water acts both as moderator & coolant (B) Coolant water boils in the core of the reactor (C) Coolant water is pressurised to prevent bulk boiling of water in the core (D) Use of moderator is not required

Last Answer : (C) Coolant water is pressurised to prevent bulk boiling of water in the core

Which of the following is not used as a moderator in nuclear reactor? (A) Molten sodium (B) Light water (C) Beryllium (D) Boron hydride

Description : Which of the following is not used as a moderator in nuclear reactor? (A) Molten sodium (B) Light water (C) Beryllium (D) Boron hydride

Last Answer : (A) Molten sodium

Pressure in a Pressurised Water Reactor (PWR) is used for (A) Maintaining constant pressure in the primary cooling circuit under varying loads (B) Superheating the steam (C) Pressurising the water in the primary coolant circuit (D) None of these

Description : Pressure in a Pressurised Water Reactor (PWR) is used for (A) Maintaining constant pressure in the primary cooling circuit under varying loads (B) Superheating the steam (C) Pressurising the water in the primary coolant circuit (D) None of these

Last Answer : (A) Maintaining constant pressure in the primary cooling circuit under varying loads

Saturated steam at 1 atm is discharged from a turbine at 1200 kg/h. Superheated steam at 300 0C and 1 atm is needed as a feed to a heat exchanger. To produce it, the turbine discharge stream is mixed with superheated steam at 400 0C, 1 atm and specific volume of 3.11 m 3 /kg. Calculate the amount of superheated steam at 300 0C produced and the volumetric flow rate of the 400 0C steam.

Description : Saturated steam at 1 atm is discharged from a turbine at 1200 kg/h. Superheated steam at 300 0C  and 1 atm is needed as a feed to a heat exchanger. To produce it, the turbine discharge ... amount of superheated steam at 300 0C produced and the volumetric flow rate of the  400 0C steam.

Last Answer : Solution 1. Mass balance of water 1200 + m1 = m2 ………………………………………… (1) …………………….1 mark 2. Energy balance (1200 kg/h)(2676 kJ/kg) + m1(3278 kJ/kg)

Pick out the wrong statement: (A) The capacity of an evaporator is reduced by the boiling point elevation (B) Corrosive liquid is normally passed through the tubes in a shell and tube heat exchanger (C) Steam jet ejector is used for vapor compression in a thermal recompression evaporator (D) Heat sensitive materials should be concentrated in high pressure evaporators

Description : Pick out the wrong statement: (A) The capacity of an evaporator is reduced by the boiling point elevation (B) Corrosive liquid is normally passed through the tubes in a ... recompression evaporator (D) Heat sensitive materials should be concentrated in high pressure evaporators

Last Answer : (D) Heat sensitive materials should be concentrated in high pressure evaporators

Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at 35°C (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C (C) Boiling brine kept in open vessel when the bottom surface temperature of the vessel is maintained constant at 180°C (D) A sub-cooled refrigerant liquid at 8°C flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Description : Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at ... flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Last Answer : (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C

Gas cooling as compared to water cooling of nuclear reactors (A) Cannot attain a high temperature (B) Is more efficient as gas has a higher specific heat (C) Can produce only saturated steam for feeding to power turbine (D) None of these

Description : Gas cooling as compared to water cooling of nuclear reactors (A) Cannot attain a high temperature (B) Is more efficient as gas has a higher specific heat (C) Can produce only saturated steam for feeding to power turbine (D) None of these

Last Answer : (D) None of these

Molten sodium is used as a coolant in a fast breeder reactor, because of its (A) Excellent moderating properties (B) Neutron breeding capability (C) Faster heat removal capability from the core (D) Capability to increase the reaction rate in the core

Description : Molten sodium is used as a coolant in a fast breeder reactor, because of its (A) Excellent moderating properties (B) Neutron breeding capability (C) Faster heat removal capability from the core (D) Capability to increase the reaction rate in the core

Last Answer : (C) Faster heat removal capability from the core

What Are The Advantages Of Gas Cooled Reactor Nuclear Power Plant?

Description : What Are The Advantages Of Gas Cooled Reactor Nuclear Power Plant?

Last Answer : 1. Fuel processing is simple. 2. The use of C02 as coolant completely eliminates the possibility of explosion in reactor. 3. No corrosion problem.

Candu reactor is a __________ nuclear reactor. (A) Natural uranium fuelled heavy water cooled & moderated (B) Highly enriched uranium (85% U-235) fuelled (C) Homogeneous (D) Fast breeder

Description : Candu reactor is a __________ nuclear reactor. (A) Natural uranium fuelled heavy water cooled & moderated (B) Highly enriched uranium (85% U-235) fuelled (C) Homogeneous (D) Fast breeder

Last Answer : (A) Natural uranium fuelled heavy water cooled & moderated

Net efficiency of ordinary light water cooled nuclear reactor is about __________ percent. (A) 32 (B) 52 (C) 72 (D) 88

Description : Net efficiency of ordinary light water cooled nuclear reactor is about __________ percent. (A) 32 (B) 52 (C) 72 (D) 88

Last Answer : (A) 32

Most of the nuclear power plants operating in the United States are: w) pressurized water reactors x) boiling water reactors y) high-temperature gas-cooled reactors z) liquid-metal fast breeder reactors

Description : Most of the nuclear power plants operating in the United States are: w) pressurized water reactors x) boiling water reactors y) high-temperature gas-cooled reactors z) liquid-metal fast breeder reactors

Last Answer : ANSWER: W -- PRESSURIZED WATER REACTORS 

Molten sodium (as a coolant in fast breeder reactor) (A) Can’t attain high temperature at normal pressure (B) Is not at all corrosive, even at a higher temperature (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water (D) None of these

Description : Molten sodium (as a coolant in fast breeder reactor) (A) Can’t attain high temperature at normal pressure (B) Is not at all corrosive, even at a higher temperature (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water (D) None of these

Last Answer : (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water

A fast breeder reactor employs (A) Graphite as moderator (B) Water as coolant (C) Molten sodium as coolant as well as moderator (D) U-235 as fuel

Description : A fast breeder reactor employs (A) Graphite as moderator (B) Water as coolant (C) Molten sodium as coolant as well as moderator (D) U-235 as fuel

Last Answer : (D) U-235 as fuel

Which of the following has the lowest Prandtl number? (A) Molten sodium (a coolant used in fast breeder reactor) (B) Water (C) Transformer oil (D) Dilute H2SO4

Description : Which of the following has the lowest Prandtl number? (A) Molten sodium (a coolant used in fast breeder reactor) (B) Water (C) Transformer oil (D) Dilute H2SO4

Last Answer : (A) Molten sodium (a coolant used in fast breeder reactor)

A fast breeder reactor (A) Utilises fast neutrons for causing fission (B) Converts fertile material (e.g., U-238) into fissile material (Pu-239) (C) Normally employs molten sodium as coolant (D) All (A), (B) and (C)

Description : A fast breeder reactor (A) Utilises fast neutrons for causing fission (B) Converts fertile material (e.g., U-238) into fissile material (Pu-239) (C) Normally employs molten sodium as coolant (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Liquid metal (e.g., molten sodium) is preferred as a coolant in case of a/an __________ reactor. (A) Homogeneous (B) Graphite moderated (C) Fast breeder (D) Enriched uranium (3% U-235) fuelled

Description : Liquid metal (e.g., molten sodium) is preferred as a coolant in case of a/an __________ reactor. (A) Homogeneous (B) Graphite moderated (C) Fast breeder (D) Enriched uranium (3% U-235) fuelled

Last Answer : (C) Fast breeder

Pump used for the transportation of molten sodium in a fast breader reactor is a/an __________ pump. (A) Reciprocating (B) Plunger (C) Electromagnetic (D) Gear

Description : Pump used for the transportation of molten sodium in a fast breader reactor is a/an __________ pump. (A) Reciprocating (B) Plunger (C) Electromagnetic (D) Gear

Last Answer : (C) Electromagnetic

Centrifugal pump can't be used to pump (A) Molten sodium (used as a coolant in Fast Breeder Reactor) (B) Moderately viscous vegetable oil used in soap industry (C) Thick molten soap at 80°C (D) None of the above

Description : Centrifugal pump can't be used to pump (A) Molten sodium (used as a coolant in Fast Breeder Reactor) (B) Moderately viscous vegetable oil used in soap industry (C) Thick molten soap at 80°C (D) None of the above

Last Answer : (C) Thick molten soap at 80°C

Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation (B) Cavitation may be caused due to boiling of liquid by decreasing the pressure resulting in formation & collapse of vapor cavities (C) Cavitation begins at higher static pressure and lower velocity in larger diameter pipelines resulting in audible noise(D) Large scale cavitation cannot damage pipeline, restrict fluid flow anddamage steam turbine blades

Description : Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation ... (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

Last Answer : (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

Which of the following may not need a moderator? (A) Candu reactor (B) Fast breeder reactor (C) Homogeneous reactor (D) Pressurised water reactor

Description : Which of the following may not need a moderator? (A) Candu reactor (B) Fast breeder reactor (C) Homogeneous reactor (D) Pressurised water reactor

Last Answer : (B) Fast breeder reactor

Reactors in commercial nuclear power plants in the U.S. are often referred to as thermal reactors. A thermal reactor uses: w) fissionable plutonium-239 as fuel. x) a relatively low heat output. y) neutrons moderated to relatively low energies. z) liquid sodium as a coolant.

Description : Reactors in commercial nuclear power plants in the U.S. are often referred to as thermal reactors. A thermal reactor uses: w) fissionable plutonium-239 as fuel. x) a relatively low heat output. y) neutrons moderated to relatively low energies. z) liquid sodium as a coolant.

Last Answer : ANSWER: Y -- NEUTRONS MODERATED TO RELATIVELY LOW ENERGIES.

Lurgi coal gasifier is a pressurised __________ bed reactor. (A) Moving (B) Fixed (C) Fluidised (D) Entrained

Description : Lurgi coal gasifier is a pressurised __________ bed reactor. (A) Moving (B) Fixed (C) Fluidised (D) Entrained

Last Answer : (A) Moving

. Lurgi coal gasifier is a pressurised __________ bed reactor. (A) Moving (B) Fixed (C) Fluidised (D) Entrained

Description : . Lurgi coal gasifier is a pressurised __________ bed reactor. (A) Moving (B) Fixed (C) Fluidised (D) Entrained

Last Answer : (A) Moving

__________ gas is normally not used as a coolant in a nuclear reactor, because of its high neutron capture cross-section. (A) Nitrogen (B) Hydrogen (C) Helium (D) Carbon dioxide

Description : __________ gas is normally not used as a coolant in a nuclear reactor, because of its high neutron capture cross-section. (A) Nitrogen (B) Hydrogen (C) Helium (D) Carbon dioxide

Last Answer : (A) Nitrogen

Coolant used in a boiling water reactor is (A) Hydrogen gas (B) Water (C) Steam (D) A mixture of water & steam

Description : Coolant used in a boiling water reactor is (A) Hydrogen gas (B) Water (C) Steam (D) A mixture of water & steam

Last Answer : (D) A mixture of water & steam

Use of molten metal as a coolant in fast breeder reactor helps in (A) Rapid heat transfer from the core (B) Accelerating the reaction rate in the core (C) Breeding neutrons (D) Accelerating the neutrons

Description : Use of molten metal as a coolant in fast breeder reactor helps in (A) Rapid heat transfer from the core (B) Accelerating the reaction rate in the core (C) Breeding neutrons (D) Accelerating the neutrons

Last Answer : (A) Rapid heat transfer from the core

In which reactor the coolant and moderator are the same ? Pressurised water reactor.

Description : In which reactor the coolant and moderator are the same ? Pressurised water reactor.

Last Answer : Pressurised water reactor.

Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger calculations (Δt) weighted is used in place of Δt, when it involves more than one sequence of heating or cooling i.e., desuperheating & condensation or condensation & sub-cooling (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted (D) In case of short tube vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Description : Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger ... vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Last Answer : (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted

Which is the most commonly used molten metal for cooling of nuclear reactors? (A) Calcium (B) Sodium (C) Mercury (D) Zinc

Description : Which is the most commonly used molten metal for cooling of nuclear reactors? (A) Calcium (B) Sodium (C) Mercury (D) Zinc

Last Answer : (B) Sodium

Nuclear fuel usually used in a Boiling Water Reactor (BWR) is (A) Plutonium (B) Enriched uranium (C) Natural uranium (D) Thorium

Description : Nuclear fuel usually used in a Boiling Water Reactor (BWR) is (A) Plutonium (B) Enriched uranium (C) Natural uranium (D) Thorium

Last Answer : (B) Enriched uranium

The most commonly used nuclear fuel in boiling water reactor is (A) Enriched uranium (B) Natural uranium (C) Plutonium

Description : The most commonly used nuclear fuel in boiling water reactor is (A) Enriched uranium (B) Natural uranium (C) Plutonium

Last Answer : (A) Enriched uranium

Heat flux increases with temperature drop beyond the Leiden frost point in the plot of heat flux vs. temperature drop for a boiling liquid, because (A) Convection becomes important (B) Conduction becomes important (C) Radiation becomes important (D) Sub-cooled boiling occurs

Description : Heat flux increases with temperature drop beyond the Leiden frost point in the plot of heat flux vs. temperature drop for a boiling liquid, because (A) Convection becomes important (B) Conduction becomes important (C) Radiation becomes important (D) Sub-cooled boiling occurs

Last Answer : (C) Radiation becomes important

Of the following, which is the best fuel for a nuclear fusion reactor: w) hydrogen x) lithium y) deuterium z) helium

Description : Of the following, which is the best fuel for a nuclear fusion reactor: w) hydrogen x) lithium y) deuterium z) helium 

Last Answer : ANSWER: Y -- DEUTERIUM

Steam is to be condensed in a shell and tube heat exchanger, 5 m long with a shell diameter of 1 m. Cooling water is to be used for removing the heat. Heat transfer co-efficient for the cooling water, whether on shell side or tube side is the same. The best arrangement is (A) Vertical heat exchanger with steam on tube side (B) Vertical heat exchanger with steam on shell side (C) Horizontal heat exchanger with steam on tube side (D) Horizontal heat exchanger with steam on shell side

Description : Steam is to be condensed in a shell and tube heat exchanger, 5 m long with a shell diameter of 1 m. Cooling water is to be used for removing the heat. Heat transfer co-efficient ... ) Horizontal heat exchanger with steam on tube side (D) Horizontal heat exchanger with steam on shell side

Last Answer : (B) Vertical heat exchanger with steam on shell side