Which of the following has maximum hydrogen/carbon ratio (by weight)? (A) Naphtha (B) Gasoline (C) Diesel (D) Fuel oil

Which of the following has maximum hydrogen/carbon ratio (by
weight)?
(A) Naphtha
(B) Gasoline
(C) Diesel
(D) Fuel oil
by

1 Answer

Answer :

(B) Gasoline
by

Related questions

Carbon/hydrogen ratio (by weight) is maximum (out of following) for (A) Gasoline (B) Kerosene (C) Light gas oil (D) Heavy fuel oil

Description : Carbon/hydrogen ratio (by weight) is maximum (out of following) for (A) Gasoline (B) Kerosene (C) Light gas oil (D) Heavy fuel oil

Last Answer : (A) Gasoline

Which of the following fractions of petroleum contains maximum sulphur? (A) Diesel (B) Gasoline (C) Naphtha (D) Atmospheric residue

Description : Which of the following fractions of petroleum contains maximum sulphur? (A) Diesel (B) Gasoline (C) Naphtha (D) Atmospheric residue

Last Answer : (D) Atmospheric residue

Which of the following has the highest viscosity of all (at a given temperature)? (A) Naphtha (B) Fuel oil (C) Light diesel oil (D) Petrol

Description : Which of the following has the highest viscosity of all (at a given temperature)? (A) Naphtha (B) Fuel oil (C) Light diesel oil (D) Petrol

Last Answer : (B) Fuel oil

Aniline point is a property of the (A) Diesel (B) LPG (C) Naphtha (D) Gasoline

Description : Aniline point is a property of the (A) Diesel (B) LPG (C) Naphtha (D) Gasoline

Last Answer : (C) Naphtha

Which of the following is not endothermic in nature? (A) Combustion of sulphur (B) Gasification of carbon (C) Thermal cracking of fuel oil (D) Steam reforming of naphtha

Description : Which of the following is not endothermic in nature? (A) Combustion of sulphur (B) Gasification of carbon (C) Thermal cracking of fuel oil (D) Steam reforming of naphtha

Last Answer : (A) Combustion of sulphur

Visbreaking process is used mainly for making (A) High cetane diesel (B) High octane gasoline (C) Fuel oil (D) Smoke free kerosene

Description : Visbreaking process is used mainly for making (A) High cetane diesel (B) High octane gasoline (C) Fuel oil (D) Smoke free kerosene

Last Answer : (C) Fuel oil

Laboratory gas is obtained by the cracking of (A) Gasoline (B) Diesel (C) Fuel oil (D) Kerosene

Description : Laboratory gas is obtained by the cracking of (A) Gasoline (B) Diesel (C) Fuel oil (D) Kerosene

Last Answer : (D) Kerosene

Feed for reforming is generally (A) Naphtha or straight run gasoline (B) Reduced crude (C) Vacuum gas oil

Description : Feed for reforming is generally (A) Naphtha or straight run gasoline (B) Reduced crude (C) Vacuum gas oil

Last Answer : (A) Naphtha or straight run gasoline

Steam reforming of naphtha is a source of hydrogen production for nitrogenous fertiliser industry. What is the usual ratio of steam to carbon maintained in the process of steam reforming of naphtha? (A) 1.5 : 1 (B) 3.5 : 1 (C) 10 : 1 (D) 15 : 1

Description : Steam reforming of naphtha is a source of hydrogen production for nitrogenous fertiliser industry. What is the usual ratio of steam to carbon maintained in the process of steam reforming of naphtha? (A) 1.5 : 1 (B) 3.5 : 1 (C) 10 : 1 (D) 15 : 1

Last Answer : (B) 3.5 : 1

Gasoline yield in catalytic reforming of naphtha may be about __________ percent by weight. (A) 85 (B) 65 (C) 50 (D) 98

Description : Gasoline yield in catalytic reforming of naphtha may be about __________ percent by weight. (A) 85 (B) 65 (C) 50 (D) 98

Last Answer : (A) 85

. Reforming (A) Uses naphtha as feedstock (B) Does not much affect the molecular weight of the feed (C) Improves the quality & yield of gasoline (D) All (A), (B) and (C)

Description : . Reforming (A) Uses naphtha as feedstock (B) Does not much affect the molecular weight of the feed (C) Improves the quality & yield of gasoline (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following is the lightest and most volatile liquid fuel A. diesel B. kerosene C. fuel oil D. gasoline

Description : Which of the following is the lightest and most volatile liquid fuel A. diesel B. kerosene C. fuel oil D. gasoline

Last Answer : ANSWER : D

Which of the following is the lightest and most volatile liquid fuel? a. diesel b. kerosene c. gasoline d. fuel oil

Description : Which of the following is the lightest and most volatile liquid fuel? a. diesel b. kerosene c. gasoline d. fuel oil

Last Answer : ANSWER c. gasoline

Which of the following has the lowest viscosity (at a given temperature) of all? (A) Naphtha (B) Kerosene (C) Diesel (D) Lube oil

Description : Which of the following has the lowest viscosity (at a given temperature) of all? (A) Naphtha (B) Kerosene (C) Diesel (D) Lube oil

Last Answer : (A) Naphtha

Which is the most ideal feed stock for 'coking' process used for the manufacture of petroleum coke? (A) Naphtha (B) Vacuum residue (C) Light gas oil (D) Diesel

Description : Which is the most ideal feed stock for 'coking' process used for the manufacture of petroleum coke? (A) Naphtha (B) Vacuum residue (C) Light gas oil (D) Diesel

Last Answer : (B) Vacuum residue

Which of the following fractions of a crude oil will have the maximum gravity API (i.e. °API)? (A) Diesel (B) Gasoline (C) Atmospheric gas oil (D) Vacuum gas oil

Description : Which of the following fractions of a crude oil will have the maximum gravity API (i.e. °API)? (A) Diesel (B) Gasoline (C) Atmospheric gas oil (D) Vacuum gas oil

Last Answer : (C) Atmospheric gas oil

C/H ratio is the maximum in case of (A) Coal (B) Furnace oil (C) Natural gas (D) Naphtha

Description : C/H ratio is the maximum in case of (A) Coal (B) Furnace oil (C) Natural gas (D) Naphtha

Last Answer : (A) Coal

The fuel -substance that causes minimum atmospheric pollution is (a) hydrogen (b) kerosene oil (c) coke (d) gasoline

Description : The fuel -substance that causes minimum atmospheric pollution is (a) hydrogen (b) kerosene oil (c) coke (d) gasoline

Last Answer : Ans:(a)

Which of the following is the most suitable feed for platforming process (reforming)? (A) Olefinic hydrocarbon (B) Naphtha (C) Fuel oil (D) Atmospheric residue

Description : Which of the following is the most suitable feed for platforming process (reforming)? (A) Olefinic hydrocarbon (B) Naphtha (C) Fuel oil (D) Atmospheric residue

Last Answer : (A) Olefinic hydrocarbon

Petroleum liquid fuels having flash point greater than 66°C is considered as safe during storage and handling. Which of the following has flash point > 66°C? (A) Naphtha (B) Petrol (C) Kerosene (D) Heavy fuel oil

Description : Petroleum liquid fuels having flash point greater than 66°C is considered as safe during storage and handling. Which of the following has flash point > 66°C? (A) Naphtha (B) Petrol (C) Kerosene (D) Heavy fuel oil

Last Answer : (D) Heavy fuel oil

Straight run naphtha is converted into high octane number petrol (gasoline) by catalytic (A) Cracking (B) Polymerisation (C) Reforming (D) Isomerisation

Description : Straight run naphtha is converted into high octane number petrol (gasoline) by catalytic (A) Cracking (B) Polymerisation (C) Reforming (D) Isomerisation

Last Answer : (C) Reforming

Consider the following statements: 1. Carbyne is an allotrope of carbon. 2. Gasoline, used as a fuel in motor vehicles is a mixture of petrol and alcohol. 3. Petroleum is also known as 'liquid gold'. 4. The various components of crude oil are separated by fractional distillation. The correct statements are: (a) 1, 2 and 4 only (b) 1, 3 and 4 only (c) 1, 2, 3 and 4 (d) 1, 2 and 3 only

Description : Consider the following statements: 1. Carbyne is an allotrope of carbon. 2. Gasoline, used as a fuel in motor vehicles is a mixture of petrol and alcohol. 3. Petroleum is also known as 'liquid gold'. 4. The various components of crude ... (b) 1, 3 and 4 only (c) 1, 2, 3 and 4 (d) 1, 2 and 3 only

Last Answer : Ans:(b)

Dip stick used for measuring the level of petro fuels (e.g. petrol, diesel, fuel oil etc.) in the storage tank is usually made of (A) Brass (B) Copper (C) High carbon steel (D) Aluminium

Description : Dip stick used for measuring the level of petro fuels (e.g. petrol, diesel, fuel oil etc.) in the storage tank is usually made of (A) Brass (B) Copper (C) High carbon steel (D) Aluminium

Last Answer : (A) Brass

Which among the following has the highest flue gas loss on combustion due to Hydrogen in the fuel? a) natural gas b) furnace oil c) coal d) light diesel oil

Description : Which among the following has the highest flue gas loss on combustion due to Hydrogen in the fuel? a) natural gas b) furnace oil c) coal d) light diesel oil

Last Answer : a) natural gas

The catalytic cracking of heavier petroleum fraction is done to produce mainly (A) Gasoline (B) Asphalt (C) Diesel oil (D) Tar

Description : The catalytic cracking of heavier petroleum fraction is done to produce mainly (A) Gasoline (B) Asphalt (C) Diesel oil (D) Tar

Last Answer : (C) Diesel oil

Why is diesel fuel more expensive than gasoline?

Description : Why is diesel fuel more expensive than gasoline?

Last Answer : It used to be half the price of normal gas. I don’t know why it jumped so high?

. C/H ratio is the minimum in case of (A) Furnace oil (B) Natural gas (C) Coal (D) Naphtha

Description : . C/H ratio is the minimum in case of (A) Furnace oil (B) Natural gas (C) Coal (D) Naphtha

Last Answer : (B) Natural gas

Which of the following contains maximum sulphur? (A) Diesel (B) Petrol (C) Kerosene (D) Fuel oil

Description : Which of the following contains maximum sulphur? (A) Diesel (B) Petrol (C) Kerosene (D) Fuel oil

Last Answer : (D) Fuel oil

Gasoline is 1. Same as diesel oil 2. Same as petrol 3. Obtained from natural gas 4. Obtained from crude oil The correct answers are: (a) 1 and 3 (b) 2 and 4 (c) 3 and 4 (d) 1 and 4

Description : Gasoline is 1. Same as diesel oil 2. Same as petrol 3. Obtained from natural gas 4. Obtained from crude oil The correct answers are: (a) 1 and 3 (b) 2 and 4 (c) 3 and 4 (d) 1 and 4

Last Answer : Ans:(b)

Which one of the following petroleum refinery products has the lowest boiling point? (1) Kerosene (2) Gasoline (3) Diesel (4) Lubricating oil

Description : Which one of the following petroleum refinery products has the lowest boiling point? (1) Kerosene (2) Gasoline (3) Diesel (4) Lubricating oil

Last Answer : (4) Lubricating oil Explanation: Lubricating oil is the most commonly used lubricant because of its wide range of possible applications. The two basic categories of lube oil are mineral and synthetic.

Octane number is related to (a) Gasoline (b) Kerosene oil (c) Diesel oil (d) Lubricating oi

Description : Octane number is related to (a) Gasoline (b) Kerosene oil (c) Diesel oil (d) Lubricating oi

Last Answer : Gasoline

For rapid curing cutbacks, the oil used is (A) Gasoline (B) Kerosene oil (C) Light diesel (D) Heavy diesel

Description : For rapid curing cutbacks, the oil used is (A) Gasoline (B) Kerosene oil (C) Light diesel (D) Heavy diesel

Last Answer : Answer: Option A

C/H ratio (by weight) of naphtha used in nitrogenous fertiliser making is about(A) 2(B) 6(C) 13(D) 20

Description : C/H ratio (by weight) of naphtha used in nitrogenous fertiliser making is about (A) 2 (B) 6 (C) 13 (D) 20

Last Answer : (B) 6

The most commonly used feed stock for the reforming reactor is (A) Heavy fuel oil (B) Residuum (C) Straight run gasoline (D) Casing head gasoline

Description : The most commonly used feed stock for the reforming reactor is (A) Heavy fuel oil (B) Residuum (C) Straight run gasoline (D) Casing head gasoline

Last Answer : (C) Straight run gasoline

Visbreaking (A) Uses natural gas as feed (B) Is carried out at atmospheric pressure (C) Produces fuel oil of lower viscosity (D) Produces gasoline only

Description : Visbreaking (A) Uses natural gas as feed (B) Is carried out at atmospheric pressure (C) Produces fuel oil of lower viscosity (D) Produces gasoline only

Last Answer : (C) Produces fuel oil of lower viscosity

Steps taken by the Government of India to control air pollution include (a) compulsory PUC (Pollution under control) certification of petrol driven vehicles which tests for carbon monoxide and hydrocarbons (b) permission to use only pure diesel with a maximum of 500 ppm sulphur as fuel for vehicles (c) use of non-polluting compressed natural gas (CNG) only as fuel by all buses and trucks (d) compulsory mixing of 20% ethyl alcohol with petrol and 20% biodiesel with diesel.

Description : Steps taken by the Government of India to control air pollution include (a) compulsory PUC (Pollution under control) certification of petrol driven vehicles which tests for carbon monoxide and ... trucks (d) compulsory mixing of 20% ethyl alcohol with petrol and 20% biodiesel with diesel.

Last Answer : (a) compulsory PUC (Pollution under control) certification of petrol driven vehicles which tests for carbon monoxide and hydrocarbons

A diesel engine is usually more efficient than a spark ignition engine because a. Diesel being a heavier hydrocarbon, release more heat per kg than gasoline b. The air standard efficiency of diesel cycle is higher than the Otto cycle, at a fixed compression ratio c. The compression ratio of a diesel engine is higher than that of an Spark ignition engine d.Self ignition temperature of diesel is higher than that of gasoline.

Description : A diesel engine is usually more efficient than a spark ignition engine because a. Diesel being a heavier hydrocarbon, release more heat per kg than gasoline b. The air standard efficiency of diesel ... an Spark ignition engine d.Self ignition temperature of diesel is higher than that of gasoline.

Last Answer : ANSWER c. The compression ratio of a diesel engine is higher than that of an S.I engine

Volvo Researchs Gasoline To Make Hydrogen For Fuel Cell?

Description : Volvo Researchs Gasoline To Make Hydrogen For Fuel Cell?

Last Answer : Volvo has a concept car, the C30, which is a plug-in electric vehicle. The range is 94 miles. Volvo is researching adding a fuel cell which would extend the range another 155 miles. To ... first glance. The process has an 85 percent efficiency rate and eliminates the need for hydrogen fuel stations.

Which one of the following has the highest fuel value? (1) Hydrogen (2) Charcoal (3) Natural gas (4) Gasoline

Description : Which one of the following has the highest fuel value? (1) Hydrogen (2) Charcoal (3) Natural gas (4) Gasoline

Last Answer : (1) Hydrogen Explanation: Hydrogen has the highest calorific value of (141,790 KJ/kg ) thus have highest fuel value. Calorific value of charcoal, natural gas and gasoline are (29,600; 43,000; 47,300 kJ/ kg) respectively.

Naphtha in a fertiliser plant is used as a source of (A) Fuel (B) H2 (C) N2 (D) O2

Description : Naphtha in a fertiliser plant is used as a source of (A) Fuel (B) H2 (C) N2 (D) O2

Last Answer : (B) H2

Which of the following is the costliest source of hydrogen needed for ammonia manufacture under Indian condition? (A) Electrolysis of water (B) Cryogenic removal of H2 from coke oven gas (C) Steam reforming of naphtha (D) Natural gas cracking

Description : Which of the following is the costliest source of hydrogen needed for ammonia manufacture under Indian condition? (A) Electrolysis of water (B) Cryogenic removal of H2 from coke oven gas (C) Steam reforming of naphtha (D) Natural gas cracking

Last Answer : (A) Electrolysis of water

Commercial production of hydrogen for the manufacture of nitrogenous fertilisers is done by (A) Steam reforming of naphtha and cracking of natural gas (B) Electrolysis of water (C) Cryogenic separation of hydrogen from coke oven gas (D) All (A), (B) and (C)

Description : Commercial production of hydrogen for the manufacture of nitrogenous fertilisers is done by (A) Steam reforming of naphtha and cracking of natural gas (B) Electrolysis of water (C) Cryogenic separation of hydrogen from coke oven gas (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following is the costliest method for commercial production of hydrogen for ammonia synthesis? (A) H2 separation from coke oven gas(B) Steam reforming of naphtha(C) Cracking of natural gas(D) Electrolysis of water

Description : Which of the following is the costliest method for commercial production of hydrogen for ammonia synthesis? (A) H2 separation from coke oven ga (B) Steam reforming of naphtha (C) Cracking of natural gas (D) Electrolysis of water

Last Answer : (D) Electrolysis of water

Hydrogen gas is not produced commercially (for nitrogenous fertiliser manufacture) by (A) Iron-steam reaction (B) Electrolysis of water (C) Steam reforming of naphtha (D) Its cryogenic separation from coke oven gas

Description : Hydrogen gas is not produced commercially (for nitrogenous fertiliser manufacture) by (A) Iron-steam reaction (B) Electrolysis of water (C) Steam reforming of naphtha (D) Its cryogenic separation from coke oven gas

Last Answer : (A) Iron-steam reaction

Which of the following is the costliest source of getting hydrogen on commercial scale for the manufacture of nitrogenous fertiliser? (A) Coal gasification (B) Steam reforming of naphtha (C) Electrolysis of water (D) Coke oven gas

Description : Which of the following is the costliest source of getting hydrogen on commercial scale for the manufacture of nitrogenous fertiliser? (A) Coal gasification (B) Steam reforming of naphtha (C) Electrolysis of water (D) Coke oven gas

Last Answer : (C) Electrolysis of water

A supercharger is used to compress a. air b. gasoline c. fuel oil d. all of the above

Description : A supercharger is used to compress a. air b. gasoline c. fuel oil d. all of the above

Last Answer : ANSWER a. air

Which of the following is the lightest and most volatile liquid fuel?  A.Gasoline  B.Kerosene  C.Fuel oil

Description : Which of the following is the lightest and most volatile liquid fuel?  A.Gasoline  B.Kerosene  C.Fuel oil

Last Answer : Answer: A

In a refinery petroleum crude is fractionated into gas fraction, light ends, intermediate distillates, heavy distillates, residues and by products. The group of products including gas oil, diesel oil and heavy fuel oil belongs to the fraction (A) Heavy distillates (B) Intermediate distillates (C) Light ends (D) Residues

Description : In a refinery petroleum crude is fractionated into gas fraction, light ends, intermediate distillates, heavy distillates, residues and by products. The group of products including gas oil, diesel oil and ... the fraction (A) Heavy distillates (B) Intermediate distillates (C) Light ends (D) Residues

Last Answer : (A) Heavy distillates

Naphtha yield in straight run distillation of crude oil may be about__________ percent.(A) 2(B) 6(C) 12(D) 18

Description : Naphtha yield in straight run distillation of crude oil may be about__________ percent. (A) 2 (B) 6 (C) 12 (D) 18

Last Answer : (B) 6

Which of the following petroleum products contain minimum sulphur? (A) Naphtha (B) Kerosene (C) LSHS (D) Furnace oil

Description : Which of the following petroleum products contain minimum sulphur? (A) Naphtha (B) Kerosene (C) LSHS (D) Furnace oil

Last Answer : (A) Naphtha