Very low pressure is expressed in microns (μ), which is equal to__________ mm of Hg column (absolute) at 0°C.(A) 0.0001(B) 0.001(C) 0.01(D) 0.1

Very low pressure is expressed in microns (μ), which is equal to__________ mm of Hg column (absolute) at 0°C.
(A) 0.0001
(B) 0.001
(C) 0.01
(D) 0.1
by

1 Answer

Answer :

(B) 0.001
by

Related questions

Rotary vacuum pumps can reduce the absolute pressure to as low as __________ mm Hg. (A) 1 (B) 0.1 (C) 0.01 (D) 0.001

Description : Rotary vacuum pumps can reduce the absolute pressure to as low as __________ mm Hg. (A) 1 (B) 0.1 (C) 0.01 (D) 0.001

Last Answer : (C) 0.01

A micron is equal to – (1) 0.1 ram (2) 0.01 mm (3) 0.001 mm (4) 0.0001 mm

Description : A micron is equal to – (1) 0.1 ram (2) 0.01 mm (3) 0.001 mm (4) 0.0001 mm

Last Answer : (3) 0.001 mm Explanation: 1 micron = 0.001 millimeters. A micrometre (micron) is one-millionth of a metre (or one-thousandth of a millimetre, 0.001 mm). Its unit symbol in the ... is a common unit of measurement for wavelengths of infrared radiation as well as sizes of cells and bacteria.

Angstrom (Å) is equal to (a) 0.01 mm (b) 0.001 mm (c) 0.0001 mm (d) 0.00001 mm

Description : Angstrom (Å) is equal to (a) 0.01 mm (b) 0.001 mm (c) 0.0001 mm (d) 0.00001 mm

Last Answer : (b) 0.001 mm

A micron is equal to (1) 0.1 mm (2) 0.01 mm (3) 0.001 mm(4) 0.0001 mm

Description : A micron is equal to (1) 0.1 mm (2) 0.01 mm (3) 0.001 mm(4) 0.0001 mm

Last Answer : 0.001 mm

or Indian standard (IS) screens, the mesh number is equal to its aperture size expressed to the nearest deca-micron (0.01 mm). Aperture width of IS screen of mesh number 50 will be approximately __________ microns. (A) 5 (B) 50 (C) 500 (D) 5000

Description : or Indian standard (IS) screens, the mesh number is equal to its aperture size expressed to the nearest deca-micron (0.01 mm). Aperture width of IS screen of mesh number 50 will be approximately __________ microns. (A) 5 (B) 50 (C) 500 (D) 5000

Last Answer : (C) 500

A conductor with a cross-sectional area of one circular mil would have a diameter of _____________. A. 0.1 inches B. 0.01 inches C. 0.001 inches D. 0.0001 inches

Description : A conductor with a cross-sectional area of one circular mil would have a diameter of _____________. A. 0.1 inches B. 0.01 inches C. 0.001 inches D. 0.0001 inches

Last Answer : Answer: C

Normal temperature and pressure (N.T.P.) corresponds to (A) 0°C and 760 mm Hg (B) 15°C and 760 mm Hg (C) 20°C and 760 mm Hg (D) 0°C and 1 kgf/cm2

Description : Normal temperature and pressure (N.T.P.) corresponds to (A) 0°C and 760 mm Hg (B) 15°C and 760 mm Hg (C) 20°C and 760 mm Hg (D) 0°C and 1 kgf/cm2

Last Answer : (C) 20°C and 760 mm Hg

Vacuum maintained in the vacuum distillation column in oil refinery is in the range of about __________ mm Hg absolute. (A) 1 to 5 (B) 30 to 80

Description : Vacuum maintained in the vacuum distillation column in oil refinery is in the range of about __________ mm Hg absolute. (A) 1 to 5 (B) 30 to 80

Last Answer : (B) 30 to 80

A cylinder contains 640 gm of liquid oxygen. The volume occupied (in litres) by the oxygen, when it is released and brought to standard conditions (0°C, 760 mm Hg) will be __________ litres. (A) 448 (B) 224 (C) 22.4 (D) Data insufficient; can't be computed

Description : A cylinder contains 640 gm of liquid oxygen. The volume occupied (in litres) by the oxygen, when it is released and brought to standard conditions (0°C, 760 mm Hg) will be __________ litres. (A) 448 (B) 224 (C) 22.4 (D) Data insufficient; can't be computed

Last Answer : (A) 448

The difference in one unit of Rockwell hardness number corresponds to a difference in the depth of indentation of __________ mm. (A) 0.001 (B) 0.01 (C) 0.002 (D) 0.02

Description : The difference in one unit of Rockwell hardness number corresponds to a difference in the depth of indentation of __________ mm. (A) 0.001 (B) 0.01 (C) 0.002 (D) 0.02

Last Answer : Option C

The Manufacturer of aeration devices reports the oxygen transfer rate of the device obtained through laboratory tests carried under standard conditions. Such standard condition are : (a) Wastewater at zero DO, 25°C and 760 mm Hg (b) Tapwater at zero DO, 0°C and 700 mm Hg (c) Tapwater at zero DO, 20°C and 760 mm Hg (d) Wastewater at zero DO, 0°C and 700 mm Hg

Description : The Manufacturer of aeration devices reports the oxygen transfer rate of the device obtained through laboratory tests carried under standard conditions. Such standard condition are : (a) Wastewater at zero DO, 25°C and 760 mm ... DO, 20°C and 760 mm Hg (d) Wastewater at zero DO, 0°C and 700 mm Hg

Last Answer : (c) Tapwater at zero DO, 20°C and 760 mm Hg

What is the typical separation between the two conductors in a parallel wire line? A. 0.001 to 0.01 m B. 200 to 500 mm C. 0.635 to 15.24 cm D. 2.5 to 5 in.

Description : What is the typical separation between the two conductors in a parallel wire line? A. 0.001 to 0.01 m B. 200 to 500 mm C. 0.635 to 15.24 cm D. 2.5 to 5 in.

Last Answer : C. 0.635 to 15.24 cm

Brownian movement is prominent in the particle size range of __________ microns in case of settling of a particle in a fluid. (A) 2 to 3 (B) 0.01 to 0.10 (C) 200 to 300 (D) 100 to 1000

Description : Brownian movement is prominent in the particle size range of __________ microns in case of settling of a particle in a fluid. (A) 2 to 3 (B) 0.01 to 0.10 (C) 200 to 300 (D) 100 to 1000

Last Answer : A) 2 to 3

In a cycle the spark lasts roughly for A. 1 sec B. 0.1 sec C. 0.0001 sec D.001 sec

Description : In a cycle the spark lasts roughly for A. 1 sec B. 0.1 sec C. 0.0001 sec D.001 sec

Last Answer : ANSWER : C

Vacuum maintained in the vacuum distillation tower of the crude distillation plant is about __________ mm Hg (absolute). (A) 5-10 (B) 30-80 (C) 150-250 (D) 350-400

Description : Vacuum maintained in the vacuum distillation tower of the crude distillation plant is about __________ mm Hg (absolute). (A) 5-10 (B) 30-80 (C) 150-250 (D) 350-400

Last Answer : (B) 30-80

Process conditions in fermentator used for production of penicillin is (A) 25°C, 2 atm (B) 50°C, l0 atm (C) 30°C, 200 mm Hg (absolute) (D) 90°C, 45 atm

Description : Process conditions in fermentator used for production of penicillin is (A) 25°C, 2 atm (B) 50°C, l0 atm (C) 30°C, 200 mm Hg (absolute) (D) 90°C, 45 atm

Last Answer : (A) 25°C, 2 atm

The blood glucose level is commonly expressed as (a) mm of Hg (b) milligram perdecilitre (c) parts per million (d) grams per liter

Description : The blood glucose level is commonly expressed as (a) mm of Hg (b) milligram perdecilitre (c) parts per million (d) grams per liter

Last Answer : Ans:(b)

The BCD equivalent of decimal 912 is ________. 60) A) 1001 0001 0010BCD B) 1001 1000 0001BCD C) 0111 1111 1110BCD D) 0010 001 1001BCD

Description : The BCD equivalent of decimal 912 is ________. 60) A) 1001 0001 0010BCD B) 1001 1000 0001BCD C) 0111 1111 1110BCD D) 0010 001 1001BCD

Last Answer : A) 1001 0001 0010BCD

The void ratio of a soil sample decreases from 1.50 to 1.25 when the pressure is increased from 25 tonnes/m2 to 50 tonnes/m2 , the coefficient of compressibility is (A) 0.01 (B) 0.02 (C) 0.05 (D) 0.001

Description : The void ratio of a soil sample decreases from 1.50 to 1.25 when the pressure is increased from 25 tonnes/m2 to 50 tonnes/m2 , the coefficient of compressibility is (A) 0.01 (B) 0.02 (C) 0.05 (D) 0.001

Last Answer : (A) 0.01

Carbon content in steel is __________ percent. (A) 0.1-2 (B) 4-6 (C) 2-4 (D) 0.001-0.01

Description : Carbon content in steel is __________ percent. (A) 0.1-2 (B) 4-6 (C) 2-4 (D) 0.001-0.01

Last Answer : (A) 0.1-2

Maximum permissible residual chlorine in treated water should be __________ mg/litre. (A) 0.001 to 0.01 (B) 0.2 to 0.3 (C) 2 to 3 (D) 5 to 10

Description : Maximum permissible residual chlorine in treated water should be __________ mg/litre. (A) 0.001 to 0.01 (B) 0.2 to 0.3 (C) 2 to 3 (D) 5 to 10

Last Answer : (B) 0.2 to 0.3

Which one of the following statements is correct regarding blood pressure? (a) 130/90 mm Hg is considered high and requires treatment. (b) 100/55 mm Hg is considered an ideal blood pressure. (c) 105/50 mm Hg makes one very active. (d) 190/110 mm Hg may harm vital organs like brain and kidney.

Description : Which one of the following statements is correct regarding blood pressure? (a) 130/90 mm Hg is considered high and requires treatment. (b) 100/55 mm Hg is considered an ideal blood pressure. (c) 105/50 mm Hg makes one very active. (d) 190/110 mm Hg may harm vital organs like brain and kidney.

Last Answer : d) 190/110 mm Hg may harm vital organs like brain and kidney.

When measuring the blood pressure in each of the patient’s arms, the nurse recognizes that in the normal adult, the pressures a) differ no more than 5 mm Hg between arm pressures. Normally, in the absence of disease of the vasculature, there is a difference of no more than 5 mm Hg between arm pressures. b) must be equal in both arms. The pressures in each arm do not have to be equal in order to be considered normal. c) may vary 10 mm Hg or more between arms. Pressures that vary more than 10 mm Hg between arms indicate an abnormal finding. d) may vary, with the higher pressure found in the left arm. The left arm pressure is not anticipated to be higher than the right as a normal anatomical variant.

Description : When measuring the blood pressure in each of the patient's arms, the nurse recognizes that in the normal adult, the pressures a) differ no more than 5 mm Hg between arm pressures. Normally, in ... . The left arm pressure is not anticipated to be higher than the right as a normal anatomical variant.

Last Answer : a) differ no more than 5 mm Hg between arm pressures. Normally, in the absence of disease of the vasculature, there is a difference of no more than 5 mm Hg between arm pressures.

Barometric pressure is equal to  (a) 760 mm Hg  (b) zero mm Hg  (c) 735.6 mm Hg  (d) 1 mm Hg  (e) 100mm Hg.

Description : Barometric pressure is equal to  (a) 760 mm Hg  (b) zero mm Hg  (c) 735.6 mm Hg  (d) 1 mm Hg  (e) 100mm Hg.

Last Answer : Answer : a

For achieving rapid drying rate in a spray dryer, the diameter of the particles in the feed should be in the range of __________ microns (1 mm = 1000 microns). (A) 1-5 (B) 10-60 (C) 200-300

Description : For achieving rapid drying rate in a spray dryer, the diameter of the particles in the feed should be in the range of __________ microns (1 mm = 1000 microns). (A) 1-5 (B) 10-60 (C) 200-300

Last Answer : (B) 10-60

In a number sequence what is 0.001 0.01 0.1 1?

Description : In a number sequence what is 0.001 0.01 0.1 1?

Last Answer : Each successive number is ten times the one before it.

What is the Next number in the sequence 0.001 0.01 0.1 1?

Description : What is the Next number in the sequence 0.001 0.01 0.1 1?

Last Answer : 10

Threshold limit value of copper in the atmospheric air is - (1) 0.001 mg/m3 (2) 0.01 mg/m3 (3) 1.0 mg/m3 (4) 5.0 mg/m3

Description : Threshold limit value of copper in the atmospheric air is - (1) 0.001 mg/m3 (2) 0.01 mg/m3 (3) 1.0 mg/m3 (4) 5.0 mg/m3

Last Answer : (3) 1.0 mg/m3 Explanation: Inspirable copper dust takes a predominantly fibrous effect. The ALV of copper aerosol in the workplace atmosphere is 0.5 mg/m3, while the threshold limit value (TLV) is 1.0 mg/m3.

Period of oscillation of 3 cm microwaves in seconds is (1) 1 x 10¹⁰ (2) 1 x 10⁻¹⁰ (3) 0.01 (4) 0.001

Description : Period of oscillation of 3 cm microwaves in seconds is (1) 1 x 10¹⁰ (2) 1 x 10⁻¹⁰ (3) 0.01 (4) 0.001

Last Answer : (2) 1 x 10⁻¹⁰ Explanation: The period of oscillation of 3 cm microwaves is 1 x 10^-10 (Physics, Volume 1, by Halliday). The period of oscillation is the smallest interval of time in which a system undergoing oscillation returns to the state it was in at the beginning of the oscillation.

When a constant discharge 2.91 litres/sec. was obtained in a pumping test, the draw downs in the test wells at 3 m and 6.184 m were 2.6 m and 0.3 m respectively. If over-all depth of the pumping well was 16 m, the permeability of the soil, is (A) 0.0005 cm/sec (B) 0.001 cm/sec (C) 0.002 cm/sec (D) 0.01 cm/sec

Description : When a constant discharge 2.91 litres/sec. was obtained in a pumping test, the draw downs in the test wells at 3 m and 6.184 m were 2.6 m and 0.3 m respectively. If over-all depth of the pumping well was 16 m, the ... (A) 0.0005 cm/sec (B) 0.001 cm/sec (C) 0.002 cm/sec (D) 0.01 cm/sec

Last Answer : Answer: Option B

The specific gravity of water is taken as (A) 0.001 (B) 0.01 (C) 0.1 (D) 1

Description : The specific gravity of water is taken as (A) 0.001 (B) 0.01 (C) 0.1 (D) 1

Last Answer : Answer: Option D

Pick up the incorrect statement from the following: (A) Dimensions are measured to the nearest 0.01 m (B) Areas are measured to the nearest 0.01 sq.m (C) Cubic contents are measured to the nearest 0.1 cum (D) Weights are measured to the nearest 0.001 tonnes

Description : Pick up the incorrect statement from the following: (A) Dimensions are measured to the nearest 0.01 m (B) Areas are measured to the nearest 0.01 sq.m (C) Cubic contents are measured to the nearest 0.1 cum (D) Weights are measured to the nearest 0.001 tonnes

Last Answer : (D) Weights are measured to the nearest 0.001 tonnes

The time of closing the cycle, in modern circuit breakers is (a) 0.003 sec (b) 0.001 sec (c) 0.01 sec (d) 0.10 sec (e) none of the above

Description : The time of closing the cycle, in modern circuit breakers is (a) 0.003 sec (b) 0.001 sec (c) 0.01 sec (d) 0.10 sec (e) none of the above

Last Answer : (a) 0.003 sec

The mechanical splice attenuation loss is _____ dB or less ∙ a. 0.1 ∙ b. 0.01 ∙ c. 0.001 ∙ d. 1

Description : The mechanical splice attenuation loss is _____ dB or less ∙ a. 0.1 ∙ b. 0.01 ∙ c. 0.001 ∙ d. 1

Last Answer : a. 0.1

A Huffman code: A = 1, B = 000, C = 001, D = 01 ,P(A) = 0.4, P(B) = 0.1, P(C) = 0.2, P(D) = 0.3 The average number of bits per letter is A. 8.0 bit B. 2.0 bit C. 1.9 bit D. 2.1 bit

Description : A Huffman code: A = 1, B = 000, C = 001, D = 01 ,P(A) = 0.4, P(B) = 0.1, P(C) = 0.2, P(D) = 0.3 The average number of bits per letter is A. 8.0 bit B. 2.0 bit C. 1.9 bit D. 2.1 bit

Last Answer : C. 1.9 bit

A Huffman code: A = 1, B = 000, C = 001, D = 01 ,P(A) = 0.4, P(B) = 0.1, P(C) = 0.2, P(D) = 0.3 The average number of bits per letter is a. 8.0 bit b. 2.0 bit c. 1.9 bit d. 2.1 bit

Description : A Huffman code: A = 1, B = 000, C = 001, D = 01 ,P(A) = 0.4, P(B) = 0.1, P(C) = 0.2, P(D) = 0.3 The average number of bits per letter is a. 8.0 bit b. 2.0 bit c. 1.9 bit d. 2.1 bit

Last Answer : c. 1.9 bit

In a transistor Colpitts oscillator, C1 = 0.001 µF, C2 = 0.01 µF and L = 5 µH. The frequency of oscillation in

Description : In a transistor Colpitts oscillator, C1 = 0.001 µF, C2 = 0.01 µF and L = 5 µH. The frequency of oscillation in MHz will be (a) 2.37 MHz (b) 10.00 MHz (c) 11.54 MHz (d) 9.09 MHz 

Last Answer : c

If μ = absolute viscosity, N= speed of the journal and p = unit bearing pressure, then the bearing characteristic number is given by (A) μN/p (B) μp/N (C) pN/μ (D) μ/pN

Description : If μ = absolute viscosity, N= speed of the journal and p = unit bearing pressure, then the bearing characteristic number is given by (A) μN/p (B) μp/N (C) pN/μ (D) μ/pN

Last Answer : (A) μN/p

Which mass measurement is expressed in exactly four significant figures 0.001 g 0.095 g 1005 g 1000 g?

Description : Which mass measurement is expressed in exactly four significant figures 0.001 g 0.095 g 1005 g 1000 g?

Last Answer : 1005 g

Which of the following ranges identifies the amount of pressure within the endotracheal tube cuff that is believed to prevent both injury and aspiration? a) 20-25 mm Hg water pressure. Usually the pressure is maintained at less than 25 cm water pressure to prevent injury and at more than 20 cm water pressure to prevent aspiration. b) 10-15 mm Hg water pressure. A measure of 10–15 mm Hg water pressure would indicate that the cuff is underinflated. c) 30-35 mm Hg water pressure. A measure of 30–35 mm Hg water pressure would indicate that the cuff is overinflated. d) 0-5 mm Hg water pressure A measure of 0-5 mm Hg water pressure would indicate that the cuff is underinflated.

Description : Which of the following ranges identifies the amount of pressure within the endotracheal tube cuff that is believed to prevent both injury and aspiration? a) 20-25 mm Hg water pressure. Usually the ... pressure A measure of 0-5 mm Hg water pressure would indicate that the cuff is underinflated.

Last Answer : a) 20-25 mm Hg water pressure. Usually the pressure is maintained at less than 25 cm water pressure to prevent injury and at more than 20 cm water pressure to prevent aspiration.

95% (by volume) of LPG at 760 mm Hg pressure will evaporate at__________ °C.(A) 2(B) -40(C) 30(D) 55

Description : 95% (by volume) of LPG at 760 mm Hg pressure will evaporate at__________ °C. (A) 2 (B) -40 (C) 30 (D) 55

Last Answer : (A) 2

Absolute zero pressure can be attained at a temperature of (A) 0°C (B) 50°K (C) 0°R (D) None of these

Description : Absolute zero pressure can be attained at a temperature of (A) 0°C (B) 50°K (C) 0°R (D) None of these

Last Answer : (C) 0°R

The condition of perfect vacuum, i.e., absolute zero pressure can be attained at  (a) a temperature of – 273.16°C  (b) a temperature of 0°C  (c) a temperature of 273 °K  (d) a negative pressure and 0°C temperature  (e) can’t be attained.

Description : The condition of perfect vacuum, i.e., absolute zero pressure can be attained at  (a) a temperature of – 273.16°C  (b) a temperature of 0°C  (c) a temperature of 273 °K  (d) a negative pressure and 0°C temperature  (e) can’t be attained.

Last Answer : Answer : a

A suspected case of poisoning has been brought to the casualty with weakness, fainting, involuntary passage of urine and stools, profuse sweating, salivation, watering from nose and eyes. His pulse is 120/min, low volume, BP 90/60 mm Hg, respiration shallow, pupil constricted, muscles flabby with occasional fasciculations. Which is the most likely type of poisoning: A. Belladonna B. Barbiturate C. Anticholinesterase D. Dicophane (DDT

Description : A suspected case of poisoning has been brought to the casualty with weakness, fainting, involuntary passage of urine and stools, profuse sweating, salivation, watering from nose and eyes. His pulse ... likely type of poisoning: A. Belladonna B. Barbiturate C. Anticholinesterase D. Dicophane (DDT

Last Answer : C. Anticholinesterase

A suspected case of poisoning has been brought to the casualty with weakness, fainting, involuntary passage of urine and stools, profuse sweating, salivation, watering from nose and eyes. His pulse is 120/min, low volume, BP 90/60 mm Hg, respiration shallow, pupil constricted, muscles flabby with occasional fasciculations. Which is the most likely type of poisoning: A. Belladonna B. Barbiturate C. Anticholinesterase D. Dicophane (DDT)

Description : A suspected case of poisoning has been brought to the casualty with weakness, fainting, involuntary passage of urine and stools, profuse sweating, salivation, watering from nose and eyes. His pulse ... likely type of poisoning: A. Belladonna B. Barbiturate C. Anticholinesterase D. Dicophane (DDT)

Last Answer : C. Anticholinesterase

1 torr is equal to A. 1 N⁄m² B. 1 mm Hg C. 1 bar D. All of the above

Description : 1 torr is equal to A. 1 N⁄m² B. 1 mm Hg C. 1 bar D. All of the above

Last Answer : 1 mm Hg

The value of 1 mm of Hg is equal to  A. 1.333 N/m2  B. 13.33 N/m2  C. 133.3 N/m2  D. 1333 N/m2

Description : The value of 1 mm of Hg is equal to  A. 1.333 N/m2  B. 13.33 N/m2  C. 133.3 N/m2  D. 1333 N/m2

Last Answer : Answer: C

I kgf/cm2 is equal to  (a) 760 mm Hg  (b) zero mm Hg  (c) 735.6 mm Hg  (d) 1 mm Hg  (e) l00 mm Hg.

Description : I kgf/cm2 is equal to  (a) 760 mm Hg  (b) zero mm Hg  (c) 735.6 mm Hg  (d) 1 mm Hg  (e) l00 mm Hg.

Last Answer : Answer : c

At 25°C and 760 mm of Hg pressure a gas occupies 600 mL volume.

Description : At 25°C and 760 mm of Hg pressure a gas occupies 600 mL volume.

Last Answer : At 25°C and 760 mm of Hg pressure a gas occupies 600 mL volume. What will be its pressure at ... temperature is 10°C and volume of the gas 640 mL ?

Oncotic pressure of plasma is about (A) 10 mm of Hg (B) 15 mm of Hg (C) 25 mm of Hg (D) 50 mm of Hg

Description : Oncotic pressure of plasma is about (A) 10 mm of Hg (B) 15 mm of Hg (C) 25 mm of Hg (D) 50 mm of Hg

Last Answer : Answer : C