Clay treatment is used to remove (A) Salt from the crude oil (B) Colour & dissolved gases from cracked gasoline (C) Wax from lube oil (D) None of these

Clay treatment is used to remove
(A) Salt from the crude oil
(B) Colour & dissolved gases from cracked gasoline
(C) Wax from lube oil
(D) None of these
by

1 Answer

Answer :

(C) Wax from lube oi
by

Related questions

Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil

Description : Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil

Last Answer : (A) Higher yield of straight run gasoline

Clay treatment of petroleum products (A) Decolorizes & stabilises cracked gasoline (B) Desulphurise straight run gasoline & kerosene(C) Adsorb arsenic from feedstock to catalytic reforming(D) All (A), (B) & (C)

Description : Clay treatment of petroleum products (A) Decolorizes & stabilises cracked gasoline (B) Desulphurise straight run gasoline & kerosene (C) Adsorb arsenic from feedstock to catalytic reforming (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Pick out the undesirable property for a solvent meant for dewaxing of lube oil. (A) Complete miscibility with oil (B) High solubility of wax in the solvent (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Pick out the undesirable property for a solvent meant for dewaxing of lube oil. (A) Complete miscibility with oil (B) High solubility of wax in the solvent (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

. The main aim of cracking is to produce (A) Gasoline (B) Lube oil (C) Petrolatum (D) Coke

Description : . The main aim of cracking is to produce (A) Gasoline (B) Lube oil (C) Petrolatum (D) Coke

Last Answer : (A) Gasoline

The function of skimming tank in sewage treatment is to remove __________ substances. (A) Dissolved solid (B) Suspended solid (C) Oil & fatty (D) Gritty & inorganic

Description : The function of skimming tank in sewage treatment is to remove __________ substances. (A) Dissolved solid (B) Suspended solid (C) Oil & fatty (D) Gritty & inorganic

Last Answer : (C) Oil & fatty

Stabilisation of gasoline (petrol) means (A) Removal of dissolved gases from it (B) Increasing its oxidation stability (C) Improving its lead susceptibility (D) Increasing its vapour pressure

Description : Stabilisation of gasoline (petrol) means (A) Removal of dissolved gases from it (B) Increasing its oxidation stability (C) Improving its lead susceptibility (D) Increasing its vapour pressure

Last Answer : (A) Removal of dissolved gases from it

Which of the following fractions of a crude oil will have the maximum gravity API (i.e. °API)? (A) Diesel (B) Gasoline (C) Atmospheric gas oil (D) Vacuum gas oil

Description : Which of the following fractions of a crude oil will have the maximum gravity API (i.e. °API)? (A) Diesel (B) Gasoline (C) Atmospheric gas oil (D) Vacuum gas oil

Last Answer : (C) Atmospheric gas oil

Percentage of straight run gasoline in a typical crude oil may be around (A) 6 (B) 18 (C) 38 (D) 52

Description : Percentage of straight run gasoline in a typical crude oil may be around (A) 6 (B) 18 (C) 38 (D) 52

Last Answer : (D) 52

Feed for reforming is generally (A) Naphtha or straight run gasoline (B) Reduced crude (C) Vacuum gas oil

Description : Feed for reforming is generally (A) Naphtha or straight run gasoline (B) Reduced crude (C) Vacuum gas oil

Last Answer : (A) Naphtha or straight run gasoline

Gasoline is 1. Same as diesel oil 2. Same as petrol 3. Obtained from natural gas 4. Obtained from crude oil The correct answers are: (a) 1 and 3 (b) 2 and 4 (c) 3 and 4 (d) 1 and 4

Description : Gasoline is 1. Same as diesel oil 2. Same as petrol 3. Obtained from natural gas 4. Obtained from crude oil The correct answers are: (a) 1 and 3 (b) 2 and 4 (c) 3 and 4 (d) 1 and 4

Last Answer : Ans:(b)

Consider the following statements: 1. Carbyne is an allotrope of carbon. 2. Gasoline, used as a fuel in motor vehicles is a mixture of petrol and alcohol. 3. Petroleum is also known as 'liquid gold'. 4. The various components of crude oil are separated by fractional distillation. The correct statements are: (a) 1, 2 and 4 only (b) 1, 3 and 4 only (c) 1, 2, 3 and 4 (d) 1, 2 and 3 only

Description : Consider the following statements: 1. Carbyne is an allotrope of carbon. 2. Gasoline, used as a fuel in motor vehicles is a mixture of petrol and alcohol. 3. Petroleum is also known as 'liquid gold'. 4. The various components of crude ... (b) 1, 3 and 4 only (c) 1, 2, 3 and 4 (d) 1, 2 and 3 only

Last Answer : Ans:(b)

Crude oil is sometimes termed sweet because it is – (1) sweet in taste due to dissolved sugars (2) mildly sweet due to low sulphur content (3) less acidic (4) less alkaline

Description : Crude oil is sometimes termed sweet because it is – (1) sweet in taste due to dissolved sugars (2) mildly sweet due to low sulphur content (3) less acidic (4) less alkaline

Last Answer : (2) mildly sweet due to low sulphur content Explanation: Crude oil is sometimes termed sweet amount of hydrogen sulphide and Carbon dioxide.

Crude oil is sometimes termed sweet because it is : (1) sweet in taste due to dissolved sugars (2) mildly sweet due to low sulphur content (3) less acidic (4) less alkaline

Description : Crude oil is sometimes termed sweet because it is : (1) sweet in taste due to dissolved sugars (2) mildly sweet due to low sulphur content (3) less acidic (4) less alkaline

Last Answer : mildly sweet due to low sulphur content

Polymerisation (A) Produces i-octane from cracked gases containing i-butane and butene (B) Causes olefins to combine with each other (C) Causes aromatics to combine with each other (D) Is aimed at producing lubricating oil

Description : Polymerisation (A) Produces i-octane from cracked gases containing i-butane and butene (B) Causes olefins to combine with each other (C) Causes aromatics to combine with each other (D) Is aimed at producing lubricating oil

Last Answer : (B) Causes olefins to combine with each other

Solvent used in duo-sol extraction for lube oil upgradation is a mixture of (A) Propane & phenol-cresol mixture(B) Methyl ethyl ketone & glycol(C) Phenol & furfural(D) Propane & liquid sulphur dioxide

Description : Solvent used in duo-sol extraction for lube oil upgradation is a mixture of (A) Propane & phenol-cresol mixture (B) Methyl ethyl ketone & glycol (C) Phenol & furfural (D) Propane & liquid sulphur dioxide

Last Answer : (A) Propane & phenol-cresol mixture

Salt content (measured as sodium chloride) in electrically desalted crude oil comes down to a level of about __________ ptb (pounds per thousand barrel). (A) 0.03 (B) 3 (C) 35 (D) 70

Description : Salt content (measured as sodium chloride) in electrically desalted crude oil comes down to a level of about __________ ptb (pounds per thousand barrel). (A) 0.03 (B) 3 (C) 35 (D) 70

Last Answer : (B) 3

Which of the following gasoline (unleaded) has the least octane number? (A) Catalytically cracked gasoline (B) Straight run gasoline (C) Catalytically reformed gasoline (D) Polymer gasoline

Description : Which of the following gasoline (unleaded) has the least octane number? (A) Catalytically cracked gasoline (B) Straight run gasoline (C) Catalytically reformed gasoline (D) Polymer gasoline

Last Answer : (B) Straight run gasoline

Which of the following categories of gasoline has the highest lead susceptibility? (A) Straight run gasoline (B) Platinum reformed gasoline (C) Catalytical cracked gasoline (D) Polymer gasoline

Description : Which of the following categories of gasoline has the highest lead susceptibility? (A) Straight run gasoline (B) Platinum reformed gasoline (C) Catalytical cracked gasoline (D) Polymer gasoline

Last Answer : (A) Straight run gasoline

Feedstock for polymerisation is (A) Naphtha (B) Cracked gases rich in C2 & C4 olefins (C) Low boiling aromatics (D) None of these

Description : Feedstock for polymerisation is (A) Naphtha (B) Cracked gases rich in C2 & C4 olefins (C) Low boiling aromatics (D) None of these

Last Answer : (B) Cracked gases rich in C2 & C4 olefins

Catalytic desulphurisation process used for sweetening of straight run gasoline and kerosene uses __________ as catalyst. (A) Bauxite (B) Fuller’s earth (C) Activated clay(D) All (A), (B) & (C)

Description : Catalytic desulphurisation process used for sweetening of straight run gasoline and kerosene uses __________ as catalyst. (A) Bauxite (B) Fuller’s earth (C) Activated clay (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Both asphalt and wax are produced by __________ base crude oils. (A) Naphthenic (B) Asphalt (C) Paraffin (D) Mixed

Description : Both asphalt and wax are produced by __________ base crude oils. (A) Naphthenic (B) Asphalt (C) Paraffin (D) Mixed

Last Answer : (C) Paraffin

Sour crude means the __________ bearing crude. (A) Asphalt (B) Sulphur compounds (C) Wax (D) Nitrogen compounds

Description : Sour crude means the __________ bearing crude. (A) Asphalt (B) Sulphur compounds (C) Wax (D) Nitrogen compounds

Last Answer : (B) Sulphur compounds

Identify the correct statement with respect to Biogas. (1) Mixture of gases from volcanoes (2) Gas produced from certain crude oil wells (3) Gas produced by incomplete combustion of biomass (4) Gas produced by fermentertian of biomass

Description : Identify the correct statement with respect to Biogas. (1) Mixture of gases from volcanoes (2) Gas produced from certain crude oil wells (3) Gas produced by incomplete combustion of biomass (4) Gas produced by fermentertian of biomass

Last Answer : (4) Gas produced by fermentertian of biomass Explanation: Biogas is produced by the anaerobic digestion or fermentation of biodegradable materials such as biomass, manure, sewage, municipal waste, green waste ... (CO2) and may have small amounts of hydrogen sulphide (H2S), moisture and siloxanes.

Identify the correct stateme-nt with respect to Biogas. (1) Mixture of gases from volcanoes (2) Gas produced from certain crude oil wells (3) Gas produced by incomplete combustion of biomass (4) Gas produced by fermen-tation of biomass

Description : Identify the correct stateme-nt with respect to Biogas. (1) Mixture of gases from volcanoes (2) Gas produced from certain crude oil wells (3) Gas produced by incomplete combustion of biomass (4) Gas produced by fermen-tation of biomass

Last Answer : Gas produced by fermen-tation of biomass

Pick out the true statement pertaining to water treatment. (A) Slow sand filters can remove colour completely (B) Activated carbon can be used for taste & odour control without subsequent filtration (C) Application of activated carbon reduces the temporary hardness of water (D) Normally, the turbidity is removed by adding a coagulant prior to sedimentation

Description : Pick out the true statement pertaining to water treatment. (A) Slow sand filters can remove colour completely (B) Activated carbon can be used for taste & odour control without subsequent filtration ... of water (D) Normally, the turbidity is removed by adding a coagulant prior to sedimentation

Last Answer : (D) Normally, the turbidity is removed by adding a coagulant prior to sedimentation

I submerged my clay pot in water for 30 minutes, then oven-baked vegetables in it for 45 minutes at 450; when I took it out it cracked ...what did I do wrong?

Description : I submerged my clay pot in water for 30 minutes, then oven-baked vegetables in it for 45 minutes at 450; when I took it out it cracked ...what did I do wrong?

Last Answer : answer:You cooked in a clay pot. No seriously, bakingware is of a very different composition. Outdoor clay pits are meant to be porous – the steam expanded and broke the pot. I’m surprised it didn’t shatter!

Which one is preferred for aircraft engine? (A) High viscosity index lube oil (B) Low viscosity index lube oil (C) High freezing point aviation fuel (D) None of these

Description : Which one is preferred for aircraft engine? (A) High viscosity index lube oil (B) Low viscosity index lube oil (C) High freezing point aviation fuel (D) None of these

Last Answer : (A) High viscosity index lube oil

Which of the following has the lowest viscosity (at a given temperature) of all? (A) Naphtha (B) Kerosene (C) Diesel (D) Lube oil

Description : Which of the following has the lowest viscosity (at a given temperature) of all? (A) Naphtha (B) Kerosene (C) Diesel (D) Lube oil

Last Answer : (A) Naphtha

Pick out the additive property of lube oil out of following. (A) °API gravity (B) Specific gravity (C) Viscosity (D) Flashpoint

Description : Pick out the additive property of lube oil out of following. (A) °API gravity (B) Specific gravity (C) Viscosity (D) Flashpoint

Last Answer : (A) °API gravity

Which of the following can be most effectively used for clarification of lube oil and printing ink? (A) Sparkler filter (B) Pre-coat filter (C) Disc-bowl centrifuge (D) Sharpies super-centrifuge

Description : Which of the following can be most effectively used for clarification of lube oil and printing ink? (A) Sparkler filter (B) Pre-coat filter (C) Disc-bowl centrifuge (D) Sharpies super-centrifuge

Last Answer : (D) Sharpies super-centrifuge

The colour of gasoline is an indication of its (A) Octane number (B) Lead susceptibility (C) Gum forming tendency & thoroughness of refining (D) None of these

Description : The colour of gasoline is an indication of its (A) Octane number (B) Lead susceptibility (C) Gum forming tendency & thoroughness of refining (D) None of these

Last Answer : (C) Gum forming tendency & thoroughness of refining

Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low boiling products are prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Description : Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low ... prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Last Answer : (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose

Crude petroleum oil is a __________ fuel. (A) Primary (B) Fossil (C) Both (A) & (B) (D) Secondary

Description : Crude petroleum oil is a __________ fuel. (A) Primary (B) Fossil (C) Both (A) & (B) (D) Secondary

Last Answer : (C) Both (A) & (B)

Operating condition in the electrical dehydrators for crude oil is about (A) 6.5 kgf/Cm2 & 95°C (B) 1 atm. & 110 °C (C) 20 kgf/cm2 & 110°C (D) 50 atm. and 150°C

Description : Operating condition in the electrical dehydrators for crude oil is about (A) 6.5 kgf/Cm2 & 95°C (B) 1 atm. & 110 °C (C) 20 kgf/cm2 & 110°C (D) 50 atm. and 150°C

Last Answer : (A) 6.5 kgf/Cm2 & 95°C

Which of the following theories of origin of petroleum does not explain the presence of nitrogen & sulphur compounds in crude oil? (A) Modern theory (B) Carbide theory (C) Engler theory (D) All (A), (B) and (C

Description : Which of the following theories of origin of petroleum does not explain the presence of nitrogen & sulphur compounds in crude oil? (A) Modern theory (B) Carbide theory (C) Engler theory (D) All (A), (B) and (C

Last Answer : (B) Carbide theory

Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point (C) Each ton of petroleum oil on distillation produces about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Description : Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches ... about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Last Answer : (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point

. __________ is not an important refinery process for upgrading the quality of lubricating oil.(A) Deoiling (B) Solvent refining (C) Clay treatment (D) Hydro-treatment

Description : . __________ is not an important refinery process for upgrading the quality of lubricating oil. (A) Deoiling (B) Solvent refining (C) Clay treatment (D) Hydro-treatment

Last Answer : (A) Deoiling

__________ treatment is done for appreciable improvement in viscosity index of lubricating oil. (A) Acid (B) Solvent extraction (C) Alkali (D) Clay

Description : __________ treatment is done for appreciable improvement in viscosity index of lubricating oil. (A) Acid (B) Solvent extraction (C) Alkali (D) Clay

Last Answer : (B) Solvent extraction

_______ is one of the product formed during refining of petroleum which is black and sticky solid used for making roads. a) paraffin wax b)asphalt c)kerosene d) gasoline

Description : _______ is one of the product formed during refining of petroleum which is black and sticky solid used for making roads. a) paraffin wax b)asphalt c)kerosene d) gasoline

Last Answer : b)asphalt

Where to give Lube Oil (Mobil) ?

Last Answer : In the upper part of the engine, you have to open the cap on the designated port of the head cover or tap cover and give the mobil.

What is the harm of running engine with low mobil or lube oil ?

Last Answer : The bearings may overheat and melt and the piston cylinder may become jammed or clogged.

How much does Jiffy Lube charge for an oil change?

Description : How much does Jiffy Lube charge for an oil change?

Last Answer : Although Jiffy Lube charges a variety of prices around the country, the average for an oil change there is $30-$40. However, they use coupons a great deal, so most people actually pay $25-$35 for their oil change from Jiffy Lube.

What does lube oil viscosity refer to?

Description : What does lube oil viscosity refer to?

Last Answer : The viscosity of a liquid is a measure of of "thick" the liquid is. E.g. Honey is very viscous, while water is not. In terms of motor oil, more viscous oil will thin out less at very ... temperature viscosity and 40 is the high temperature viscosity. (scale of 0-60, with 60 being the most viscous)

Where can I buy lube oil for my car?

Description : Where can I buy lube oil for my car?

Last Answer : You can buy lube oil almost anywhere. Wal-Mart, Canadian Tire, Jiffy Lube, gas stations etc. You can probably also go to any dealership in your area, as they will know exactly what kind of oil your should be using and they would offer a variety.

According to Coast Guard Regulation (46 CFR) for emergency power and lighting systems, which of the listed items is the only permissible starting aid for the emergency diesel generator engine? A. Ether B. Lube oil heater C. Jacket water heater D. Fuel oil heater

Description : According to Coast Guard Regulation (46 CFR) for emergency power and lighting systems, which of the listed items is the only permissible starting aid for the emergency diesel generator engine? A. Ether B. Lube oil heater C. Jacket water heater D. Fuel oil heater

Last Answer : Answer: C

The main purpose of an electric space heater installed in a large AC generator is to _____________. A. keep the lube oil warm for quick starting B. prevent moisture from condensing in the windings when the machine is shutdown C. prevent the windings from becoming brittle D. prevent acidic pitting of the slip rings

Description : The main purpose of an electric space heater installed in a large AC generator is to _____________. A. keep the lube oil warm for quick starting B. prevent moisture from condensing in the ... is shutdown C. prevent the windings from becoming brittle D. prevent acidic pitting of the slip rings

Last Answer : Answer: B

Diesel generators #1 and #2 are operating in parallel at near full load capacity. Diesel generator #1 suddenly trips out mechanically due to low lube oil pressure. The reverse power relay functions properly and trips generator #1 electrically off the bo A. Start the emergency generator. B. Ascertain cause of the low lube oil pressure. C. Strip the board of all nonvital circuits. D. Secure alarms, reset reverse power relay, and restart #1 engine.

Description : Diesel generators #1 and #2 are operating in parallel at near full load capacity. Diesel generator #1 suddenly trips out mechanically due to low lube oil pressure. The reverse power relay functions ... all nonvital circuits. D. Secure alarms, reset reverse power relay, and restart #1 engine.

Last Answer : Answer: C

On large generators, space heaters are used to ____________. A. keep the machine at ambient tmperature of the machinery space B. maintain rotor and stator winding temperatures above the dew point to prevent the formation of condensation C. prevent condensation in the lube oil D. prevent electrolysis due to condensation in the bearings

Description : On large generators, space heaters are used to ____________. A. keep the machine at ambient tmperature of the machinery space B. maintain rotor and stator winding temperatures above the dew point ... C. prevent condensation in the lube oil D. prevent electrolysis due to condensation in the bearings

Last Answer : Answer: B