Stabilisation of gasoline (petrol) means (A) Removal of dissolved gases from it (B) Increasing its oxidation stability (C) Improving its lead susceptibility (D) Increasing its vapour pressure

Stabilisation of gasoline (petrol) means
(A) Removal of dissolved gases from it
(B) Increasing its oxidation stability
(C) Improving its lead susceptibility
(D) Increasing its vapour pressure
by

1 Answer

Answer :

(A) Removal of dissolved gases from it
by

Related questions

Use of catalyst is a must in the ammonia manufacture, because the reaction is reversible as well as the heat of dissociation of N2 & H2 is high. The presence of promoter along with the catalyst helps in __________ of the catalyst. (A) Stabilisation (B) Increasing the effectiveness (C) Improving the strength & heat resistance (D) All a, b & c

Description : Use of catalyst is a must in the ammonia manufacture, because the reaction is reversible as well as the heat of dissociation of N2 & H2 is high. The presence of promoter along with the catalyst helps in ... B) Increasing the effectiveness (C) Improving the strength & heat resistance (D) All a, b & c

Last Answer : (D) All a, b & c

Pick out the wrong statement. (A) Higher temperature is employed in visbreaking than in thermal cracking (B) Pyrolysis is a mild thermal cracking process (C) Lead susceptibility of petrol produced by catalytic process is more than that produced by thermal cracking (D) Operating pressure and temperature in thermal cracking process is more than that in catalytic cracking process

Description : Pick out the wrong statement. (A) Higher temperature is employed in visbreaking than in thermal cracking (B) Pyrolysis is a mild thermal cracking process (C) Lead susceptibility of ... Operating pressure and temperature in thermal cracking process is more than that in catalytic cracking process

Last Answer : (A) Higher temperature is employed in visbreaking than in thermal cracking (B) Pyrolysis is a mild thermal cracking process

The colour of gasoline is an indication of its (A) Octane number (B) Lead susceptibility (C) Gum forming tendency & thoroughness of refining (D) None of these

Description : The colour of gasoline is an indication of its (A) Octane number (B) Lead susceptibility (C) Gum forming tendency & thoroughness of refining (D) None of these

Last Answer : (C) Gum forming tendency & thoroughness of refining

Presence of sulphur in gasoline (A) Leads to corrosion (B) Increases lead susceptibility (C) Decreases gum formation (D) Helps during stabilisatio

Description : Presence of sulphur in gasoline (A) Leads to corrosion (B) Increases lead susceptibility (C) Decreases gum formation (D) Helps during stabilisatio

Last Answer : (A) Leads to corrosion

Which of the following categories of gasoline has the highest lead susceptibility? (A) Straight run gasoline (B) Platinum reformed gasoline (C) Catalytical cracked gasoline (D) Polymer gasoline

Description : Which of the following categories of gasoline has the highest lead susceptibility? (A) Straight run gasoline (B) Platinum reformed gasoline (C) Catalytical cracked gasoline (D) Polymer gasoline

Last Answer : (A) Straight run gasoline

The ratio of oxygen available to the oxygen required for stabilisation of sewage is called the (A) Bacterial stability factor (B) Relative stability (C) Biological oxygen demand (BOD) (D) Oxygen ion concentration

Description : The ratio of oxygen available to the oxygen required for stabilisation of sewage is called the (A) Bacterial stability factor (B) Relative stability (C) Biological oxygen demand (BOD) (D) Oxygen ion concentration

Last Answer : (B) Relative stability

Clay treatment is used to remove (A) Salt from the crude oil (B) Colour & dissolved gases from cracked gasoline (C) Wax from lube oil (D) None of these

Description : Clay treatment is used to remove (A) Salt from the crude oil (B) Colour & dissolved gases from cracked gasoline (C) Wax from lube oil (D) None of these

Last Answer : (C) Wax from lube oi

Lead exhausted in the atmosphere by automobiles using leaded petrol (i.e. tetraethyl lead for improving octane number) is a lethal air pollutant which causes (A) Paralysis of muscles & loss of appetite (B) Nervous depression (C) Gastritis and diarrhea (D) All (A), (B) and (C)

Description : Lead exhausted in the atmosphere by automobiles using leaded petrol (i.e. tetraethyl lead for improving octane number) is a lethal air pollutant which causes (A) Paralysis of muscles & loss of appetite (B) Nervous depression (C) Gastritis and diarrhea (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Removal of light fractions from crude oil is called its (A) Sweetening (B) Dehydration (C) Stabilisation (D) Visbreaking

Description : Removal of light fractions from crude oil is called its (A) Sweetening (B) Dehydration (C) Stabilisation (D) Visbreaking

Last Answer : (C) Stabilisation

Removal of __________ is accomplished by aeration of water. (A) Dissolved gases (B) Suspended solids (C) Dissolved solids (D) None of these

Description : Removal of __________ is accomplished by aeration of water. (A) Dissolved gases (B) Suspended solids (C) Dissolved solids (D) None of these

Last Answer : (A) Dissolved gases

The amount of tetraethyl lead added to improve the octane number of motor gasoline is around __________ c.c per gallon of petrol. (A) 3 (B) 300 (C) 3000 (D) 1000

Description : The amount of tetraethyl lead added to improve the octane number of motor gasoline is around __________ c.c per gallon of petrol. (A) 3 (B) 300 (C) 3000 (D) 1000

Last Answer : (A) 3

The vent valve provided in a liquid handling centrifugal pump is (A) Generally a needle valve (B) Used to release any gases that might be vapour locking the pump (C) Helpful in easy removal of samples (D) All (A), (B) and (C)

Description : The vent valve provided in a liquid handling centrifugal pump is (A) Generally a needle valve (B) Used to release any gases that might be vapour locking the pump (C) Helpful in easy removal of samples (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Mastication of rubber means (A) Its softening (B) A treatment to retard its deterioration due to oxidation (C) Improving its curing rate (D) Depression of its freezing point

Description : Mastication of rubber means (A) Its softening (B) A treatment to retard its deterioration due to oxidation (C) Improving its curing rate (D) Depression of its freezing point

Last Answer : (A) Its softening

The aim of genomic medicine is a) improving predictions about individuals’ susceptibility to diseases Predictions regarding the time of their onset, their extent and eventual severity as well as which treatments or medications are likely to be most effective or harmful are the focus of genomic medicine. b) reproduction The focus of genomic medicine is broader than the reproduction of cells. c) cure of disease The focus of genomic medicine is broader than the cure of disease. d) cloning Genomic medicine is gene-based health care.

Description : The aim of genomic medicine is a) improving predictions about individuals' susceptibility to diseases Predictions regarding the time of their onset, their extent and eventual severity as well as which ... broader than the cure of disease. d) cloning Genomic medicine is gene-based health care.

Last Answer : a) improving predictions about individuals’ susceptibility to diseases Predictions regarding the time of their onset, their extent and eventual severity as well as which treatments or medications are likely to be most effective or harmful are the focus of genomic medicine.

Give reason for the following observation (L-III) (a)- The tendency for catenation decreases down the group in group 14 (b)- The decreasing stability of+3 oxidation state with increasing atomic no. in group 13. (c)- Molten aluminum bromide is a poor conductor of electricity.

Description : Give reason for the following observation (L-III) (a)- The tendency for catenation decreases down the group in group 14 (b)- The decreasing stability of+3 oxidation state with increasing atomic no. in group 13. (c)- Molten aluminum bromide is a poor conductor of electricity.

Last Answer : Ans. -(a) it is due to decrease in bond dissociation energy which is due to increase in atomic size C-C > Si-Si >Ge-Ge>Sn-Sn>Pb-Pb. (b)- It is due to inert pair effect. (c)- Molten AlBr3 is poor conductor of electricity because it is covalent compound.

Reid vapour pressure of gasoline is the measure of its (A) Pour point (B) Cloud point (C) Vapour locking tendency (D) Carbon residue

Description : Reid vapour pressure of gasoline is the measure of its (A) Pour point (B) Cloud point (C) Vapour locking tendency (D) Carbon residue

Last Answer : (C) Vapour locking tendency

Higher vapour pressure of gasoline indicates(A) Low flash point(B) High breathing loss(C) Both (A) and (B)(D) Neither (A) nor (B

Description : Higher vapour pressure of gasoline indicates (A) Low flash point (B) High breathing loss (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (D) Neither (A) nor (B

Vacuum filter is most suitable for the (A) Removal of fines from liquid (B) Liquids having high vapour pressure (C) Liquids of very high viscosity (D) None of these

Description : Vacuum filter is most suitable for the (A) Removal of fines from liquid (B) Liquids having high vapour pressure (C) Liquids of very high viscosity (D) None of these

Last Answer : (D) None of these

Pick out the wrong statement. (A) Caustic embrittlement of boiler's metallic parts is caused by highconcentration of caustic soda in boiler feed water(B) Cooling and freezing of water kills the bacteria present in it(C) With increasing boiler operating pressure of steam, the maximumallowable concentration of silica in feed water goes on decreasing(D) Dissolved oxygen content in high pressure boiler feed water should benil

Description : Pick out the wrong statement. (A) Caustic embrittlement of boiler's metallic parts is caused by highconcentration of caustic soda in boiler feed water (B) Cooling and freezing of water kills the ... goes on decreasing (D) Dissolved oxygen content in high pressure boiler feed water should be nil

Last Answer : (B) Cooling and freezing of water kills the bacteria present in it

Boiling range of motor gasoline is an indication of the (A) Case of starting (B) Rate of acceleration (C) Vapour locking tendency (D) All (A), (B) and (C)

Description : Boiling range of motor gasoline is an indication of the (A) Case of starting (B) Rate of acceleration (C) Vapour locking tendency (D) All (A), (B) and (C)

Last Answer : (B) Rate of acceleration

Which of the following is desirable in petrol (gasoline) but undesirable in kerosene? (A) Paraffins (B) Aromatics (C) Mercaptans

Description : Which of the following is desirable in petrol (gasoline) but undesirable in kerosene? (A) Paraffins (B) Aromatics (C) Mercaptans

Last Answer : (C) Mercaptans

Straight run naphtha is converted into high octane number petrol (gasoline) by catalytic (A) Cracking (B) Polymerisation (C) Reforming (D) Isomerisation

Description : Straight run naphtha is converted into high octane number petrol (gasoline) by catalytic (A) Cracking (B) Polymerisation (C) Reforming (D) Isomerisation

Last Answer : (C) Reforming

The relative saturation of a partially saturated mixture of vapour and gas can be increased by __________ of the mixture. (A) Reducing the total pressure (B) Increasing the total pressure (C) Reducing the temperature (D) Both (B) and (C)

Description : The relative saturation of a partially saturated mixture of vapour and gas can be increased by __________ of the mixture. (A) Reducing the total pressure (B) Increasing the total pressure (C) Reducing the temperature (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Which of the following performance characteristics of a S.I engine is not affected by the front end volatility of the petrol used? (A) Vapour locking (B) Hot starting (C) Spark plug fouling (D) All 'a', 'b' & 'c'

Description : Which of the following performance characteristics of a S.I engine is not affected by the front end volatility of the petrol used? (A) Vapour locking (B) Hot starting (C) Spark plug fouling (D) All 'a', 'b' & 'c'

Last Answer : (C) Spark plug fouling

Complete removal of __________ from gasoline is done by Unisol process using caustic soda and methyl alcohol. (A) Waxes (B) Mercaptans (C) Asphalt (D) Diolefins

Description : Complete removal of __________ from gasoline is done by Unisol process using caustic soda and methyl alcohol. (A) Waxes (B) Mercaptans (C) Asphalt (D) Diolefins

Last Answer : (B) Mercaptans

Hydrazine is used in water treatment for the removal of (A) Colloidal impurities (B) Dissolved oxygen (C) Turbidity (D) Chlorinous taste

Description : Hydrazine is used in water treatment for the removal of (A) Colloidal impurities (B) Dissolved oxygen (C) Turbidity (D) Chlorinous taste

Last Answer : (B) Dissolved oxygen

Which furnace employs an I.D. fan for the removal of flue gases from the furnace? (A) Coke oven(B) Blast furnace stoves(C) Beehive coke oven(D) High pressure boiler

Description : Which furnace employs an I.D. fan for the removal of flue gases from the furnace? (A) Coke oven (B) Blast furnace stoves (C) Beehive coke oven (D) High pressure boiler

Last Answer : (D) High pressure boiler

Pick out the wrong statement. (A) A slight haze at the top of chimney indicates good combustion in the furnace (B) A bag filter incurs very small pressure drop and is very efficient for removal of submicronic dust particles from flue gases at very high temperature (C) Electrostatic precipitator is the most efficient dust collection equipment for removal of submicronic dust particles present in flue gas (D) None of these

Description : Pick out the wrong statement. (A) A slight haze at the top of chimney indicates good combustion in the furnace (B) A bag filter incurs very small pressure drop and is very efficient for ... dust collection equipment for removal of submicronic dust particles present in flue gas (D) None of these

Last Answer : (B) A bag filter incurs very small pressure drop and is very efficient for removal of submicronic dust particles from flue gases at very high temperature

Which of the following processes is used for the production of petroleum coke? (A) Stabilisation (B) Visbreaking (C) Cracking (D) Reforming

Description : Which of the following processes is used for the production of petroleum coke? (A) Stabilisation (B) Visbreaking (C) Cracking (D) Reforming

Last Answer : (C) Cracking

What is the difference between petrol and gasoline?

Description : What is the difference between petrol and gasoline?

Last Answer : Petrol and gasoline are the same thing - gasoline is simply the American term for petrol.

Gasoline is 1. Same as diesel oil 2. Same as petrol 3. Obtained from natural gas 4. Obtained from crude oil The correct answers are: (a) 1 and 3 (b) 2 and 4 (c) 3 and 4 (d) 1 and 4

Description : Gasoline is 1. Same as diesel oil 2. Same as petrol 3. Obtained from natural gas 4. Obtained from crude oil The correct answers are: (a) 1 and 3 (b) 2 and 4 (c) 3 and 4 (d) 1 and 4

Last Answer : Ans:(b)

Consider the following statements: 1. Carbyne is an allotrope of carbon. 2. Gasoline, used as a fuel in motor vehicles is a mixture of petrol and alcohol. 3. Petroleum is also known as 'liquid gold'. 4. The various components of crude oil are separated by fractional distillation. The correct statements are: (a) 1, 2 and 4 only (b) 1, 3 and 4 only (c) 1, 2, 3 and 4 (d) 1, 2 and 3 only

Description : Consider the following statements: 1. Carbyne is an allotrope of carbon. 2. Gasoline, used as a fuel in motor vehicles is a mixture of petrol and alcohol. 3. Petroleum is also known as 'liquid gold'. 4. The various components of crude ... (b) 1, 3 and 4 only (c) 1, 2, 3 and 4 (d) 1, 2 and 3 only

Last Answer : Ans:(b)

(4) water and petrol are immiscible with each other and petrol which forms the upper layer continues to burn Explanation: Water is not effective in extinguishing a fire caused by petrol because water and petrol are immiscible with each other and petrol which forms the upper layer continues to burn. The specific gravity (or relative density) of gasoline ranges from 0.71-0.77 kg/l (719.7 kg/m3) while the specific gravity of water is 1000 kg/m3 and that is why gasoline or petrol floats on the upper surface of the water. Water cannot generally be used to extinguish a gasoline fire, unless used in a fine mist.

Description : (4) water and petrol are immiscible with each other and petrol which forms the upper layer continues to burn Explanation: Water is not effective in extinguishing a fire caused by petrol because water and ... . Water cannot generally be used to extinguish a gasoline fire, unless used in a fine mist.

Last Answer : "All the four quantum numbers of two electrons in an atom are not the same." It is the law of (1) Hund’s (2) Exclusion Principle of Pauli (3) Uncertainty Principle of Giesenberg (4) Avogadro’s law

Glycol is added to aviation gasoline because it (1) reduces evaporation of petrol (2) increases efficiency of petrol (3) prevents freezing of petrol (4) reduces consumption of petrol

Description : Glycol is added to aviation gasoline because it (1) reduces evaporation of petrol (2) increases efficiency of petrol (3) prevents freezing of petrol (4) reduces consumption of petrol

Last Answer : prevents freezing of petrol

An eudiometer measures (1) Atmospheric pressure (2) Time (3) Volume of gases (4) Vapour pressure

Description : An eudiometer measures (1) Atmospheric pressure (2) Time (3) Volume of gases (4) Vapour pressure

Last Answer : Volume of gases

Addition of lead, sulphur and phosphorus to low carbon steel helps in improving its (A) Corrosion resistance (B) Tensile strength (C) Machinability (D) Compressive strength

Description : Addition of lead, sulphur and phosphorus to low carbon steel helps in improving its (A) Corrosion resistance (B) Tensile strength (C) Machinability (D) Compressive strength

Last Answer : (C) Machinability

Addition of __________ to steel does not help in improving its machinability. (A) Sulphur (B) Silicon (C) Lead (D) Phosphorous

Description : Addition of __________ to steel does not help in improving its machinability. (A) Sulphur (B) Silicon (C) Lead (D) Phosphorous

Last Answer : (B) Silicon

Addition of __________ to steel does not help in improving its machinability. (A) Sulphur (B) Silicon (C) Lead (D) Phosphorous

Description : Addition of __________ to steel does not help in improving its machinability. (A) Sulphur (B) Silicon (C) Lead (D) Phosphorous

Last Answer : Option B

5. In "Imperial Smelting Process" for extraction of zinc, zinc vapour thus produced is quenched in the external condenser by the use of the following: (A) Jet of water at high pressure (B) Blast of air (C) Mixture of water and air (D) Rain of molten lead

Description : 5. In "Imperial Smelting Process" for extraction of zinc, zinc vapour thus produced is quenched in the external condenser by the use of the following: (A) Jet of water at high pressure (B) Blast of air (C) Mixture of water and air (D) Rain of molten lead

Last Answer : Option D

Removal of __________ exemplifies an adsorption unit operation. (A) Uranium from its ore (B) Water from petrol (C) Ammonia from coke oven gas (D) Mustard oil from mustard seed

Description : Removal of __________ exemplifies an adsorption unit operation. (A) Uranium from its ore (B) Water from petrol (C) Ammonia from coke oven gas (D) Mustard oil from mustard seed

Last Answer : (B) Water from petro

Neoprene which is used for making shoe heels & belts is superior to natural rubber in its stability to aerial oxidation and resistance to oils & other solvents. The monomer used for making neoprene is (A) Chloroethane (B) Chloroprene (C) Isoprene (D) None of these

Description : Neoprene which is used for making shoe heels & belts is superior to natural rubber in its stability to aerial oxidation and resistance to oils & other solvents. The monomer used for making neoprene is (A) Chloroethane (B) Chloroprene (C) Isoprene (D) None of these

Last Answer : (B) Chloroprene

Cetane number of a diesel fuel is the measure of its (A) Ignition delay (B) Smoke point (C) Viscosity (D) Oxidation stability

Description : Cetane number of a diesel fuel is the measure of its (A) Ignition delay (B) Smoke point (C) Viscosity (D) Oxidation stability

Last Answer : (A) Ignition delay

Dearomatization of kerosene (by liquid sulphur dioxide extraction) is done to (A) Increase its smoke point (B) Improve its oxidation stability (C) Decrease the breathing loss (D) None of these

Description : Dearomatization of kerosene (by liquid sulphur dioxide extraction) is done to (A) Increase its smoke point (B) Improve its oxidation stability (C) Decrease the breathing loss (D) None of these

Last Answer : (B) Improve its oxidation stability

Mineral oils (e.g. petroleum oils) are preferred over fatty oils (e.g. mustard oil, ghee, tallow, palm oil, olive oil etc.) as a lubricant due to its (A) Poor oxidation stability and high gum forming tendency (B) Greater tendency of decomposition at elevated temperature (C) Hydrolysis tendency in presence of water (D) All (A), (B) and (C)

Description : Mineral oils (e.g. petroleum oils) are preferred over fatty oils (e.g. mustard oil, ghee, tallow, palm oil, olive oil etc.) as a lubricant due to its (A) Poor oxidation stability and high gum forming ... at elevated temperature (C) Hydrolysis tendency in presence of water (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Gum formation in stored gasoline is mainly due to the (A) Alkylation of unsaturated (B) Presence of sulphur (C) Oxidation & polymerisation of unsaturated (D) Higher aromatic content

Description : Gum formation in stored gasoline is mainly due to the (A) Alkylation of unsaturated (B) Presence of sulphur (C) Oxidation & polymerisation of unsaturated (D) Higher aromatic content

Last Answer : (B) Presence of sulphur

Which of the following is an additive used for improving the cetane number of diesel? (A) Tetraethyl lead (B) Tetramethyllead (C) Ethyl nitrate or acetone (D) None of these

Description : Which of the following is an additive used for improving the cetane number of diesel? (A) Tetraethyl lead (B) Tetramethyllead (C) Ethyl nitrate or acetone (D) None of these

Last Answer : (A) Tetraethyl lead

Lagoons used for purification of polluted water (A) Are large shallow artificial lakes also known as clarification lakes, maturation ponds or oxidation ponds (B) Use micro-organisms/bacteria in presence of dissolved oxygen (C) Gives an excellent final effluent (with 3 to 4 lagoons arranged in series) having suspended solid < 1 mg/litre and BOD = 3.8 mg/litre (D) All (A), (B) & (C)

Description : Lagoons used for purification of polluted water (A) Are large shallow artificial lakes also known as clarification lakes, maturation ponds or oxidation ponds (B) Use micro-organisms/bacteria in presence of dissolved oxygen (C) Gives an ... 1 mg/litre and BOD = 3.8 mg/litre (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

When the gas to be dissolved in liquid is a/an __________ then normally co-current adsorber are used. (A) Mixture of two gases (B) Pure gas (C) Ideal gas (D) Sparingly soluble gas

Description : When the gas to be dissolved in liquid is a/an __________ then normally co-current adsorber are used. (A) Mixture of two gases (B) Pure gas (C) Ideal gas (D) Sparingly soluble gas

Last Answer : (B) Pure gas

The phenomenon occuring during pumping of a liquid solution containing dissolved gases, which may come out of the solution giving rise to gas pockets, is termed as (A) Evaporation (B) Cavitation (C) Sublimation (D) Stripping

Description : The phenomenon occuring during pumping of a liquid solution containing dissolved gases, which may come out of the solution giving rise to gas pockets, is termed as (A) Evaporation (B) Cavitation (C) Sublimation (D) Stripping

Last Answer : (B) Cavitation

Turbidity of water is an indication of the presence of (A) Suspended inorganic matter (B) Dissolved solids (C) Floating solids (D) Dissolved gases

Description : Turbidity of water is an indication of the presence of (A) Suspended inorganic matter (B) Dissolved solids (C) Floating solids (D) Dissolved gases

Last Answer : (A) Suspended inorganic matter