Which of the following can be most effectively used for clarification of lube oil and printing ink? (A) Sparkler filter (B) Pre-coat filter (C) Disc-bowl centrifuge (D) Sharpies super-centrifuge

Which of the following can be most effectively used for clarification of
lube oil and printing ink?
(A) Sparkler filter
(B) Pre-coat filter
(C) Disc-bowl centrifuge
(D) Sharpies super-centrifuge
by

1 Answer

Answer :

(D) Sharpies super-centrifuge
by

Related questions

Where the density difference of the two liquid phase to be separated is very small (as in milk cream separator), the most suitable separator is a (A) Disc bowl centrifuge (B) Sharpies super-centrifuge (C) Batch basket centrifuge

Description : Where the density difference of the two liquid phase to be separated is very small (as in milk cream separator), the most suitable separator is a (A) Disc bowl centrifuge (B) Sharpies super-centrifuge (C) Batch basket centrifuge

Last Answer : (A) Disc bowl centrifuge

Moisture can be removed from lubricating oil using (A) Tubular centrifuge (B) Clarifier (C) Sparkler filter (D) Vacuum leaf filter

Description : Moisture can be removed from lubricating oil using (A) Tubular centrifuge (B) Clarifier (C) Sparkler filter (D) Vacuum leaf filter

Last Answer : (A) Tubular centrifuge

Gelatinous solid (which plug the septum) can be filtered by a __________ filter. (A) Sparkler (B) Plate and frame (C) Vacuum leaf (D) Pre-coat

Description : Gelatinous solid (which plug the septum) can be filtered by a __________ filter. (A) Sparkler (B) Plate and frame (C) Vacuum leaf (D) Pre-coat

Last Answer : (D) Pre-coat

Which of the following is not a wet classifier? (A) Sharpies super-centrifuge (B) Hydrocyclones (C) Dorr Oliver rake classifier (D) None of these

Description : Which of the following is not a wet classifier? (A) Sharpies super-centrifuge (B) Hydrocyclones (C) Dorr Oliver rake classifier (D) None of these

Last Answer : (D) None of these

Which of the following is not an industrial screening equipment? (A) Sharpies centrifuge (B) Vibrating screen (C) Grizzly (D) Trommel

Description : Which of the following is not an industrial screening equipment? (A) Sharpies centrifuge (B) Vibrating screen (C) Grizzly (D) Trommel

Last Answer : (A) Sharpies centrifug

The most suitable equipment used to devulcanise rubber scrap and to make water dispersion & rubber solution is a (A) Boundary mixer (B) Propeller agitator (C) Sharpies centrifuge

Description : The most suitable equipment used to devulcanise rubber scrap and to make water dispersion & rubber solution is a (A) Boundary mixer (B) Propeller agitator (C) Sharpies centrifuge

Last Answer : (A) Boundary mixer

__________ Centrifuge is normally used in sugar mills. (A) Tubular bowl (B) Disc-bowl (C) Suspended batch basket (D) Perforated horizontal basket continuous

Description : __________ Centrifuge is normally used in sugar mills. (A) Tubular bowl (B) Disc-bowl (C) Suspended batch basket (D) Perforated horizontal basket continuous

Last Answer : (C) Suspended batch basket

__________ centrifuge is the most suitable for separation of non-friable crystals. (A) Tubular bowl (B) Disc-bowl (C) Perforated horizontal basket continuous (D) Suspended batch baske

Description : __________ centrifuge is the most suitable for separation of non-friable crystals. (A) Tubular bowl (B) Disc-bowl (C) Perforated horizontal basket continuous (D) Suspended batch baske

Last Answer : (C) Perforated horizontal basket continuous

Which of the following is a vacuum filter? (A) Filter press (B) Rotary disc filter (C) Batch basket centrifuge (D) Tank filter (Nutsche filter)

Description : Which of the following is a vacuum filter? (A) Filter press (B) Rotary disc filter (C) Batch basket centrifuge (D) Tank filter (Nutsche filter)

Last Answer : (B) Rotary disc filter

For separation of sugar solution from settled out mud, we use a __________ filter. (A) Sparkler (B) Plate and frame (C) Centrifugal (D) Rotary drum vacuum

Description : For separation of sugar solution from settled out mud, we use a __________ filter. (A) Sparkler (B) Plate and frame (C) Centrifugal (D) Rotary drum vacuum

Last Answer : (C) Centrifugal

Filtration of water in a paper mill is done by a/an __________ filter. (A) Open sand (B) Plate and frame (C) Vacuum leaf (D) Sparkler

Description : Filtration of water in a paper mill is done by a/an __________ filter. (A) Open sand (B) Plate and frame (C) Vacuum leaf (D) Sparkler

Last Answer : (A) Open sand

Can a salad spinner be used effectively as a centrifuge?

Description : Can a salad spinner be used effectively as a centrifuge?

Last Answer : Looks like it could.

Separation of isotopes is generally done using a/an __________ centrifuge. (A) Ultra (B) Disk-bowl (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Separation of isotopes is generally done using a/an __________ centrifuge. (A) Ultra (B) Disk-bowl (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (A) Ultra

Dust laden air can be purified using a (A) Cyclone separator (B) Bag filter (C) Gravity settler (D) Tubular centrifuge

Description : Dust laden air can be purified using a (A) Cyclone separator (B) Bag filter (C) Gravity settler (D) Tubular centrifuge

Last Answer : (A) Cyclone separator

Removal of activated carbon from glycerine is done by (A) Plate and frame filter (B) Rotary vacuum filter (C) Batch basket centrifuge (D) None of these

Description : Removal of activated carbon from glycerine is done by (A) Plate and frame filter (B) Rotary vacuum filter (C) Batch basket centrifuge (D) None of these

Last Answer : (A) Plate and frame filter

Which of the following is the most suitable filter for separation ofabrasive solids suspended in a corrosive liquid?(A) Sand bed filter(B) Plate and frame filter press(C) Vacuum filter(D) Batch basket centrifuge

Description : Which of the following is the most suitable filter for separation ofabrasive solids suspended in a corrosive liquid? (A) Sand bed filter (B) Plate and frame filter press (C) Vacuum filter (D) Batch basket centrifuge

Last Answer : (C) Vacuum filter

Define The term Clarification. Write the working of filter candle with neat diagram.

Description : Define The term Clarification. Write the working of filter candle with neat diagram.

Last Answer : Clarification:-  When solids are present in a very small proportion i.e. not exceeding 1.0 % the process of its separation from liquid, is called clarification. Working :-   1) These are ... the candle & gets collected inside the candle from where it is removed. Diagram :

Differentiate between filtration and clarification. Enlist various filter media used in Pharmacy.

Description : Differentiate between filtration and clarification. Enlist various filter media used in Pharmacy.

Last Answer : Sr. no. Filtration Clarification 1 It is process of removal of solids or suspended matter in a liquid or gas by passing through a porous medium in which solids are retained. ... wool iv) Asbestos v) Fine muslin vi) Filter cloth vii) Membrane filters viii) Sintered glass filters.

Which one is preferred for aircraft engine? (A) High viscosity index lube oil (B) Low viscosity index lube oil (C) High freezing point aviation fuel (D) None of these

Description : Which one is preferred for aircraft engine? (A) High viscosity index lube oil (B) Low viscosity index lube oil (C) High freezing point aviation fuel (D) None of these

Last Answer : (A) High viscosity index lube oil

Which of the following has the lowest viscosity (at a given temperature) of all? (A) Naphtha (B) Kerosene (C) Diesel (D) Lube oil

Description : Which of the following has the lowest viscosity (at a given temperature) of all? (A) Naphtha (B) Kerosene (C) Diesel (D) Lube oil

Last Answer : (A) Naphtha

Solvent used in duo-sol extraction for lube oil upgradation is a mixture of (A) Propane & phenol-cresol mixture(B) Methyl ethyl ketone & glycol(C) Phenol & furfural(D) Propane & liquid sulphur dioxide

Description : Solvent used in duo-sol extraction for lube oil upgradation is a mixture of (A) Propane & phenol-cresol mixture (B) Methyl ethyl ketone & glycol (C) Phenol & furfural (D) Propane & liquid sulphur dioxide

Last Answer : (A) Propane & phenol-cresol mixture

Pick out the undesirable property for a solvent meant for dewaxing of lube oil. (A) Complete miscibility with oil (B) High solubility of wax in the solvent (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Pick out the undesirable property for a solvent meant for dewaxing of lube oil. (A) Complete miscibility with oil (B) High solubility of wax in the solvent (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil

Description : Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil

Last Answer : (A) Higher yield of straight run gasoline

Pick out the additive property of lube oil out of following. (A) °API gravity (B) Specific gravity (C) Viscosity (D) Flashpoint

Description : Pick out the additive property of lube oil out of following. (A) °API gravity (B) Specific gravity (C) Viscosity (D) Flashpoint

Last Answer : (A) °API gravity

Clay treatment is used to remove (A) Salt from the crude oil (B) Colour & dissolved gases from cracked gasoline (C) Wax from lube oil (D) None of these

Description : Clay treatment is used to remove (A) Salt from the crude oil (B) Colour & dissolved gases from cracked gasoline (C) Wax from lube oil (D) None of these

Last Answer : (C) Wax from lube oi

. The main aim of cracking is to produce (A) Gasoline (B) Lube oil (C) Petrolatum (D) Coke

Description : . The main aim of cracking is to produce (A) Gasoline (B) Lube oil (C) Petrolatum (D) Coke

Last Answer : (A) Gasoline

Tapper roller bearing are used in disc harrow because a) It can take heavy radial loads b) It can take both radial as well as end thrust c) It can operate effectively at low speed and in contact with dirt d) Both (b) and (c) are true

Description : Tapper roller bearing are used in disc harrow because a) It can take heavy radial loads b) It can take both radial as well as end thrust c) It can operate effectively at low speed and in contact with dirt d) Both (b) and (c) are true

Last Answer : d) Both (b) and (c) are true

Where to give Lube Oil (Mobil) ?

Last Answer : In the upper part of the engine, you have to open the cap on the designated port of the head cover or tap cover and give the mobil.

What is the harm of running engine with low mobil or lube oil ?

Last Answer : The bearings may overheat and melt and the piston cylinder may become jammed or clogged.

How much does Jiffy Lube charge for an oil change?

Description : How much does Jiffy Lube charge for an oil change?

Last Answer : Although Jiffy Lube charges a variety of prices around the country, the average for an oil change there is $30-$40. However, they use coupons a great deal, so most people actually pay $25-$35 for their oil change from Jiffy Lube.

What does lube oil viscosity refer to?

Description : What does lube oil viscosity refer to?

Last Answer : The viscosity of a liquid is a measure of of "thick" the liquid is. E.g. Honey is very viscous, while water is not. In terms of motor oil, more viscous oil will thin out less at very ... temperature viscosity and 40 is the high temperature viscosity. (scale of 0-60, with 60 being the most viscous)

Where can I buy lube oil for my car?

Description : Where can I buy lube oil for my car?

Last Answer : You can buy lube oil almost anywhere. Wal-Mart, Canadian Tire, Jiffy Lube, gas stations etc. You can probably also go to any dealership in your area, as they will know exactly what kind of oil your should be using and they would offer a variety.

According to Coast Guard Regulation (46 CFR) for emergency power and lighting systems, which of the listed items is the only permissible starting aid for the emergency diesel generator engine? A. Ether B. Lube oil heater C. Jacket water heater D. Fuel oil heater

Description : According to Coast Guard Regulation (46 CFR) for emergency power and lighting systems, which of the listed items is the only permissible starting aid for the emergency diesel generator engine? A. Ether B. Lube oil heater C. Jacket water heater D. Fuel oil heater

Last Answer : Answer: C

The main purpose of an electric space heater installed in a large AC generator is to _____________. A. keep the lube oil warm for quick starting B. prevent moisture from condensing in the windings when the machine is shutdown C. prevent the windings from becoming brittle D. prevent acidic pitting of the slip rings

Description : The main purpose of an electric space heater installed in a large AC generator is to _____________. A. keep the lube oil warm for quick starting B. prevent moisture from condensing in the ... is shutdown C. prevent the windings from becoming brittle D. prevent acidic pitting of the slip rings

Last Answer : Answer: B

Diesel generators #1 and #2 are operating in parallel at near full load capacity. Diesel generator #1 suddenly trips out mechanically due to low lube oil pressure. The reverse power relay functions properly and trips generator #1 electrically off the bo A. Start the emergency generator. B. Ascertain cause of the low lube oil pressure. C. Strip the board of all nonvital circuits. D. Secure alarms, reset reverse power relay, and restart #1 engine.

Description : Diesel generators #1 and #2 are operating in parallel at near full load capacity. Diesel generator #1 suddenly trips out mechanically due to low lube oil pressure. The reverse power relay functions ... all nonvital circuits. D. Secure alarms, reset reverse power relay, and restart #1 engine.

Last Answer : Answer: C

On large generators, space heaters are used to ____________. A. keep the machine at ambient tmperature of the machinery space B. maintain rotor and stator winding temperatures above the dew point to prevent the formation of condensation C. prevent condensation in the lube oil D. prevent electrolysis due to condensation in the bearings

Description : On large generators, space heaters are used to ____________. A. keep the machine at ambient tmperature of the machinery space B. maintain rotor and stator winding temperatures above the dew point ... C. prevent condensation in the lube oil D. prevent electrolysis due to condensation in the bearings

Last Answer : Answer: B

An open-circuit fault between the pressure switch and the 'annunciator module' shown in the illustration would cause the alarm circuit to react in the same manner as if ___________. EL-0094 A. 3.5 volts were applied to the 'setpoint module' B. 'reduction gear lube oil pressure' fell below switch setting C. 50 PSI were applied to the 'setpoint module' D. the pressure switch closed

Description : An open-circuit fault between the pressure switch and the 'annunciator module' shown in the illustration would cause the alarm circuit to react in the same manner as if ___________. EL-0094 A. 3.5 ... below switch setting C. 50 PSI were applied to the 'setpoint module' D. the pressure switch closed

Last Answer : Answer: B

The main purpose of an electric space heater installed in a large AC generator is to _____________. A. prevent the windings from becoming brittle B. prevent moisture from condensing in the windings during shutdown C. prevent acidic pitting of the slip rings D. keep the lube oil warm for quick starting

Description : The main purpose of an electric space heater installed in a large AC generator is to _____________. A. prevent the windings from becoming brittle B. prevent moisture from condensing in the windings during ... C. prevent acidic pitting of the slip rings D. keep the lube oil warm for quick starting

Last Answer : Answer: B

Which of the damages listed can occur to the components of a winch master control switch, if the cover gasket becomes deteriorated? A. Overheating of the winch motor. B. Contamination of lube oil. C. Sparking at the winch motor brushes. D. Rapid corrosion of switch components.

Description : Which of the damages listed can occur to the components of a winch master control switch, if the cover gasket becomes deteriorated? A. Overheating of the winch motor. B. Contamination of lube oil. C. Sparking at the winch motor brushes. D. Rapid corrosion of switch components.

Last Answer : Answer: D

Have you ever been burned by the sparks from a sparkler?

Description : Have you ever been burned by the sparks from a sparkler?

Last Answer : answer:This is a really great question. My experience with sparklers is similar to yours none of the sparks ever burned my bare hands. So why the fuss? A quick internet search provided some insightful ... when it comes to using sparklers. It is often the children who end up paying the price.

Pre-operatively, the nurse identified the nursing dagnosis, “Knowledge Deficit: Post-operative communication strategies”. Which of the following is a relevant nursing intervention? A. Clarify information on purpose, anticipate benefits and consequences of total laryngectomy B. Explain that total laryngectomy results in loss of ability to verbally communicate C. Arrange a visit to a post-laryngectomy client who effectively uses an alternative form of verbal communication D. Illustrate means of communicating post- operatively

Description : Pre-operatively, the nurse identified the nursing dagnosis, Knowledge Deficit: Post-operative communication strategies . Which of the following is a relevant nursing intervention? A. ... uses an alternative form of verbal communication D. Illustrate means of communicating post- operatively

Last Answer : D. Illustrate means of communicating post- operatively

. Herbicide effectively controls Saccharum and Sorghum halepense only at pre flowering stage a). Diuron b). Atrazine c). Amitrole d). Both a and c

Description : . Herbicide effectively controls Saccharum and Sorghum halepense only at pre flowering stage a). Diuron b). Atrazine c). Amitrole d). Both a and c

Last Answer : d). Both a and c

Are Sharpies bad for your skin?

Description : Are Sharpies bad for your skin?

Last Answer : it’s not great… and from my experience as a kid, they take a few days to wash off. But it’s not toxic or anything.

Are sharpies polar or non polar?

Description : Are sharpies polar or non polar?

Last Answer : What is the answer ?

My printer is not printing black ink, but its not out of black ink.

Description : My printer is not printing black ink, but its not out of black ink.

Last Answer : Check to make sure that you nozzles on the ink cartridge isn't clogged.

Identify dispersed phase and dispersion medium in the following colloidal dispersions : a. milk  b. blood  c. printing ink

Description : Identify dispersed phase and dispersion medium in the following colloidal dispersions : a. milk  b. blood  c. printing ink

Last Answer : Identify dispersed phase and dispersion medium in the following colloidal dispersions : a. milk b. blood c. printing ink d. fog

What ink is used in printing a shirt using the silk screen process?

Description : What ink is used in printing a shirt using the silk screen process?

Last Answer : Basically, it is the process of using a stencil to apply ink onto another material, Traditionally the process was called screen printing or silkscreen printing .

How do I find out which printing ink cartridge I need for my printer?

Description : How do I find out which printing ink cartridge I need for my printer?

Last Answer : The first place to look would be the owners manual that came with the printer. That will list the cartridges that fit your printer. An alternative would be to go to a store and ask a representative. ... sure to write down the name of your printer and any details that would be helpful to identify it.