Catalytic desulphurisation process used for sweetening of straight run gasoline and kerosene uses __________ as catalyst. (A) Bauxite (B) Fuller’s earth (C) Activated clay(D) All (A), (B) & (C)

Catalytic desulphurisation process used for sweetening of straight run
gasoline and kerosene uses __________ as catalyst.
(A) Bauxite
(B) Fuller’s earth
(C) Activated clay
(D) All (A), (B) & (C)
by

1 Answer

Answer :

(D) All (A), (B) & (C)
by

Related questions

Clay treatment of petroleum products (A) Decolorizes & stabilises cracked gasoline (B) Desulphurise straight run gasoline & kerosene(C) Adsorb arsenic from feedstock to catalytic reforming(D) All (A), (B) & (C)

Description : Clay treatment of petroleum products (A) Decolorizes & stabilises cracked gasoline (B) Desulphurise straight run gasoline & kerosene (C) Adsorb arsenic from feedstock to catalytic reforming (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

In Hydrofining catalytic desulphurisation process for sweetening of petroleum products, use of hydrogen (A) Enhances the desulphurisation process (B) Minimises coke formation (C) Both (A) and (B) (D) Neither (A) nor (B

Description : In Hydrofining catalytic desulphurisation process for sweetening of petroleum products, use of hydrogen (A) Enhances the desulphurisation process (B) Minimises coke formation (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) and (B)

__________ is the most commonly used 'filter aid'. (A) Diatomaceous earth (B) Fuller's earth (C) Vermiculite (D) Semi-plastic clay

Description : __________ is the most commonly used 'filter aid'. (A) Diatomaceous earth (B) Fuller's earth (C) Vermiculite (D) Semi-plastic clay

Last Answer : (A) Diatomaceous earth

Which of the following adsorbent is used to decolourise yellow glycerine? (A) Silica gel (B) Alumina (C) Fuller's earth (D) Activated carbon

Description : Which of the following adsorbent is used to decolourise yellow glycerine? (A) Silica gel (B) Alumina (C) Fuller's earth (D) Activated carbon

Last Answer : (D) Activated carbon

Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming process (C) The most ideal feedstock for thermal reforming is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Description : Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming ... is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Last Answer : (C) The most ideal feedstock for thermal reforming is dearomatised kerosene

Straight run naphtha is converted into high octane number petrol (gasoline) by catalytic (A) Cracking (B) Polymerisation (C) Reforming (D) Isomerisation

Description : Straight run naphtha is converted into high octane number petrol (gasoline) by catalytic (A) Cracking (B) Polymerisation (C) Reforming (D) Isomerisation

Last Answer : (C) Reforming

Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given conversion (C) Percentage conversion increases with increase in the catalyst to oil ratio (D) All (A), (B) and (C)

Description : Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given ... with increase in the catalyst to oil ratio (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Catalyst used in desulphurisation of naphtha is (A) Co-Mo (B) Pt-Rh (C) Silica gel (D) Nickel

Description : Catalyst used in desulphurisation of naphtha is (A) Co-Mo (B) Pt-Rh (C) Silica gel (D) Nickel

Last Answer : (A) Co-Mo

A typical yield of kerosene in straight run distillation of crude oil may be about __________ percent. (A) 4 (B) 10 (C) 18 (D) 26

Description : A typical yield of kerosene in straight run distillation of crude oil may be about __________ percent. (A) 4 (B) 10 (C) 18 (D) 26

Last Answer : (B) 10

Pick out the correct statement about catalytic polymerisation. (A) H2SO4 polymerisation process gives gasoline rich in unsaturates (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive (C) Both (A) and (B) (D) Neither (A) nor (B

Description : Pick out the correct statement about catalytic polymerisation. (A) H2SO4 polymerisation process gives gasoline rich in unsaturates (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive

Pick out the wrong statement. (A) Alkylation produces a larger iso-paraffin (having higher octane number) from the reaction of an olefin with smaller iso-paraffin (B) Catalytic alkylation processes use HF, AlCl3 & H2SO4 as Catalysts (C) All the alkylation processes use very high temperature (> 1000°C) (D) Gasoline having an octane number of 90 can be produced by alkylation process

Description : Pick out the wrong statement. (A) Alkylation produces a larger iso-paraffin (having higher octane number) from the reaction of an olefin with smaller iso-paraffin (B) Catalytic alkylation processes use HF ... (> 1000°C) (D) Gasoline having an octane number of 90 can be produced by alkylation process

Last Answer : (C) All the alkylation processes use very high temperature (> 1000°C)

Yellow glycerine is made into white, using (A) Activated carbon (B) Diatomaceous earth (C) Bauxite (D) Bentonite

Description : Yellow glycerine is made into white, using (A) Activated carbon (B) Diatomaceous earth (C) Bauxite (D) Bentonite

Last Answer : (A) Activated carbon

Gasoline extracted from natural gas (by compression and cooling) is called the __________ gasoline. (A) Polymer (B) Unleaded (C) Casing head (D) Straight run

Description : Gasoline extracted from natural gas (by compression and cooling) is called the __________ gasoline. (A) Polymer (B) Unleaded (C) Casing head (D) Straight run

Last Answer : (B) Unleaded

Gasoline yield in catalytic reforming of naphtha may be about __________ percent by weight. (A) 85 (B) 65 (C) 50 (D) 98

Description : Gasoline yield in catalytic reforming of naphtha may be about __________ percent by weight. (A) 85 (B) 65 (C) 50 (D) 98

Last Answer : (A) 85

Visbreaking process is used mainly for making (A) High cetane diesel (B) High octane gasoline (C) Fuel oil (D) Smoke free kerosene

Description : Visbreaking process is used mainly for making (A) High cetane diesel (B) High octane gasoline (C) Fuel oil (D) Smoke free kerosene

Last Answer : (C) Fuel oil

In catalytic cracking, the (A) Gasoline obtained has a very low octane number (B) Pressure & temperature is very high (C) Gasoline obtained has very high aromatic content (D) Gasoline obtained has very high amount of gum forming compounds

Description : In catalytic cracking, the (A) Gasoline obtained has a very low octane number (B) Pressure & temperature is very high (C) Gasoline obtained has very high aromatic content (D) Gasoline obtained has very high amount of gum forming compounds

Last Answer : (C) Gasoline obtained has very high aromatic content

During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98

Description : During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98

Last Answer : (D) 98

A reaction in which one of the products of reaction acts as a catalyst is called a/an __________ reaction. (A) Catalytic (B) Autocatalytic (C) Photochemical

Description : A reaction in which one of the products of reaction acts as a catalyst is called a/an __________ reaction. (A) Catalytic (B) Autocatalytic (C) Photochemical

Last Answer : (C) Photochemical

The reaction in which one of the products of reaction acts as a catalyst is called a/an __________ reaction. (A) Biochemical (B) Photochemical (C) Catalytic (D) Autocatalytic

Description : The reaction in which one of the products of reaction acts as a catalyst is called a/an __________ reaction. (A) Biochemical (B) Photochemical (C) Catalytic (D) Autocatalytic

Last Answer : (D) Autocatalytic

Overall rate of reaction in a heterogeneous catalytic reaction depends upon the mass and energy transfer from the fluid to solid surface and its rate of reaction is usually __________ the concentration of catalyst, if it doesnot entail a chain mechanism.(A) Proportional to(B) Independent of(C) Inversely proportional to(D) Proportional to the square o

Description : Overall rate of reaction in a heterogeneous catalytic reaction depends upon the mass and energy transfer from the fluid to solid surface and its rate of reaction is usually __________ the concentration of ... to (B) Independent of (C) Inversely proportional to (D) Proportional to the square o

Last Answer : (A) Proportional to

The equilibrium constant of a catalytic chemical reaction __________ due to the presence of a catalyst. (A) Increases (B) Decreases (C) Remain unaffected (D) Unpredictable from the data

Description : The equilibrium constant of a catalytic chemical reaction __________ due to the presence of a catalyst. (A) Increases (B) Decreases (C) Remain unaffected (D) Unpredictable from the data

Last Answer : (C) Remain unaffected

Octane number of gasoline produced by two stage fluidised catalytic cracking process is (A) 80 (B) 87 (C) 92 (D) 97

Description : Octane number of gasoline produced by two stage fluidised catalytic cracking process is (A) 80 (B) 87 (C) 92 (D) 97

Last Answer : (D) 97

Solvent naphtha' used mostly as a solvent in paints and perfumery is produced by the __________ of virgin naphtha into small boiling range cuts. (A) Steam reforming (B) Distillation (C) Desulphurisation (D) None of these

Description : Solvent naphtha' used mostly as a solvent in paints and perfumery is produced by the __________ of virgin naphtha into small boiling range cuts. (A) Steam reforming (B) Distillation (C) Desulphurisation (D) None of these

Last Answer : (B) Distillation

Catalyst used in the production of high density polythene by low pressure Ziegler process is(A) Aluminium triethyl activated with TiCl4(B) Platinum(C) Molybdenum(D) Nickel

Description : Catalyst used in the production of high density polythene by low pressure Ziegler process is (A) Aluminium triethyl activated with TiCl4 (B) Platinum (C) Molybdenum (D) Nickel

Last Answer : (A) Aluminium triethyl activated with TiCl4

The most commonly used feed stock for the reforming reactor is (A) Heavy fuel oil (B) Residuum (C) Straight run gasoline (D) Casing head gasoline

Description : The most commonly used feed stock for the reforming reactor is (A) Heavy fuel oil (B) Residuum (C) Straight run gasoline (D) Casing head gasoline

Last Answer : (C) Straight run gasoline

Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil

Description : Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil

Last Answer : (A) Higher yield of straight run gasoline

Percentage of straight run gasoline in a typical crude oil may be around (A) 6 (B) 18 (C) 38 (D) 52

Description : Percentage of straight run gasoline in a typical crude oil may be around (A) 6 (B) 18 (C) 38 (D) 52

Last Answer : (D) 52

Feed for reforming is generally (A) Naphtha or straight run gasoline (B) Reduced crude (C) Vacuum gas oil

Description : Feed for reforming is generally (A) Naphtha or straight run gasoline (B) Reduced crude (C) Vacuum gas oil

Last Answer : (A) Naphtha or straight run gasoline

Which of the following gasoline (unleaded) has the least octane number? (A) Catalytically cracked gasoline (B) Straight run gasoline (C) Catalytically reformed gasoline (D) Polymer gasoline

Description : Which of the following gasoline (unleaded) has the least octane number? (A) Catalytically cracked gasoline (B) Straight run gasoline (C) Catalytically reformed gasoline (D) Polymer gasoline

Last Answer : (B) Straight run gasoline

Which of the following categories of gasoline has the highest lead susceptibility? (A) Straight run gasoline (B) Platinum reformed gasoline (C) Catalytical cracked gasoline (D) Polymer gasoline

Description : Which of the following categories of gasoline has the highest lead susceptibility? (A) Straight run gasoline (B) Platinum reformed gasoline (C) Catalytical cracked gasoline (D) Polymer gasoline

Last Answer : (A) Straight run gasoline

Power alcohol as compared to straight run gasoline has lower (A) Calorific value (B) Octane number (C) Specific gravity (D) Viscosity

Description : Power alcohol as compared to straight run gasoline has lower (A) Calorific value (B) Octane number (C) Specific gravity (D) Viscosity

Last Answer : (A) Calorific value

The main use of heavy gas oil produced by the vacuum distillation unit is as a (A) Blending component for kerosene (B) Blending component for petrol (C) Feedstock for fluid catalytic cracking unit (D) None of these

Description : The main use of heavy gas oil produced by the vacuum distillation unit is as a (A) Blending component for kerosene (B) Blending component for petrol (C) Feedstock for fluid catalytic cracking unit (D) None of these

Last Answer : (C) Feedstock for fluid catalytic cracking unit

Clay treatment is used to remove (A) Salt from the crude oil (B) Colour & dissolved gases from cracked gasoline (C) Wax from lube oil (D) None of these

Description : Clay treatment is used to remove (A) Salt from the crude oil (B) Colour & dissolved gases from cracked gasoline (C) Wax from lube oil (D) None of these

Last Answer : (C) Wax from lube oi

Carbon/hydrogen ratio (by weight) is maximum (out of following) for (A) Gasoline (B) Kerosene (C) Light gas oil (D) Heavy fuel oil

Description : Carbon/hydrogen ratio (by weight) is maximum (out of following) for (A) Gasoline (B) Kerosene (C) Light gas oil (D) Heavy fuel oil

Last Answer : (A) Gasoline

Pyrolysis of kerosene or natural gasoline is done to produce mainly the (A) Olefins and aromatics (B) Lighter paraffins (C) Stabilised gasoline (D) Diesel

Description : Pyrolysis of kerosene or natural gasoline is done to produce mainly the (A) Olefins and aromatics (B) Lighter paraffins (C) Stabilised gasoline (D) Diesel

Last Answer : (A) Olefins and aromatic

Which of the following is desirable in diesel and kerosene but is undesirable in gasoline? (A) Aromatics (B) Mercaptans (C) Paraffins (D) Naphthenic acid

Description : Which of the following is desirable in diesel and kerosene but is undesirable in gasoline? (A) Aromatics (B) Mercaptans (C) Paraffins (D) Naphthenic acid

Last Answer : (A) Aromatics

Which of the following is desirable in petrol (gasoline) but undesirable in kerosene? (A) Paraffins (B) Aromatics (C) Mercaptans

Description : Which of the following is desirable in petrol (gasoline) but undesirable in kerosene? (A) Paraffins (B) Aromatics (C) Mercaptans

Last Answer : (C) Mercaptans

Laboratory gas is obtained by the cracking of (A) Gasoline (B) Diesel (C) Fuel oil (D) Kerosene

Description : Laboratory gas is obtained by the cracking of (A) Gasoline (B) Diesel (C) Fuel oil (D) Kerosene

Last Answer : (D) Kerosene

Catalyst used in steam reforming of naphtha is (A) Bauxite (B) Cobalt (C) Nickel oxide on alumina support (D) Chromium

Description : Catalyst used in steam reforming of naphtha is (A) Bauxite (B) Cobalt (C) Nickel oxide on alumina support (D) Chromium

Last Answer : (C) Nickel oxide on alumina support

The molecular structure of the straight-run gasoline is changed by a) reforming b) refining c) cracking d) boiling

Description : The molecular structure of the straight-run gasoline is changed by a) reforming b) refining c) cracking d) boiling

Last Answer : Answer: a Explanation: The molecular structure of the straight-run gasoline is changed by reforming and hydrocarbons are decomposed into smaller hydrocarbons by cracking.

The catalytic cracking of heavier petroleum fraction is done to produce mainly (A) Gasoline (B) Asphalt (C) Diesel oil (D) Tar

Description : The catalytic cracking of heavier petroleum fraction is done to produce mainly (A) Gasoline (B) Asphalt (C) Diesel oil (D) Tar

Last Answer : (C) Diesel oil

Sweetening of petroleum product means the removal of (A) Sulphur & its compounds (B) Water (C) Organic impurities (D) Wax

Description : Sweetening of petroleum product means the removal of (A) Sulphur & its compounds (B) Water (C) Organic impurities (D) Wax

Last Answer : (A) Sulphur & its compounds

In solutizer sweetening process, solutizer solution used is (A) Methanol in Unisol process (B) Naphthenic acid in Mercapsol process (C) Both (A) and (B)

Description : In solutizer sweetening process, solutizer solution used is (A) Methanol in Unisol process (B) Naphthenic acid in Mercapsol process (C) Both (A) and (B)

Last Answer : (C) Both (A) and (B)

In sweetening process, solutizer agent used with caustic alkali is (A) Potassium isobutyrate(B) Sodium plumbite(C) Methanol(D) Phenol

Description : In sweetening process, solutizer agent used with caustic alkali is (A) Potassium isobutyrate (B) Sodium plumbite (C) Methanol (D) Phenol

Last Answer : (A) Potassium isobutyrate

. Which of the following is used as a catalyst in fluidised bed catalytic cracking? (A) Silica-magnesia (B) Silica-alumina (C) Bentonite clays (D) All (A), (B) and (C

Description : . Which of the following is used as a catalyst in fluidised bed catalytic cracking? (A) Silica-magnesia (B) Silica-alumina (C) Bentonite clays (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

Catalyst used in the catalytic cracking is (A) Silica-alumina (B) Silica gel (C) Vanadium pentoxide (D) Nickel

Description : Catalyst used in the catalytic cracking is (A) Silica-alumina (B) Silica gel (C) Vanadium pentoxide (D) Nickel

Last Answer : (A) Silica-alumina

Catalyst used in catalytic reforming is (A) Platinum on alumina (B) Nickel (C) Iron (D) Aluminium chloride

Description : Catalyst used in catalytic reforming is (A) Platinum on alumina (B) Nickel (C) Iron (D) Aluminium chloride

Last Answer : (A) Platinum on alumina

Catalyst used in the catalytic polymerisation is (A) Phosphoric acid on kieselguhr (B) Aluminium chloride (C) Nickel (D) Vanadium pentoxide

Description : Catalyst used in the catalytic polymerisation is (A) Phosphoric acid on kieselguhr (B) Aluminium chloride (C) Nickel (D) Vanadium pentoxide

Last Answer : (A) Phosphoric acid on kieselguhr

Catalyst used in catalytic polymerisation which produces polymergasoline is(A) H2SO4(B) H3PO4(C) Both (A) and (B)(D) AlCl3

Description : Catalyst used in catalytic polymerisation which produces polymergasoline is (A) H2SO4 (B) H3PO4 (C) Both (A) and (B) (D) AlCl3

Last Answer : (C) Both (A) and (B)

Which is a catalyst promoter used in catalytic ammonia synthesis reaction? (A) Al2O3 (B) Cr2O3 (C) K2O (D) MnO

Description : Which is a catalyst promoter used in catalytic ammonia synthesis reaction? (A) Al2O3 (B) Cr2O3 (C) K2O (D) MnO

Last Answer : (C) K2O