Description : Aniline point test of an oil qualitatively indicates the __________ content of an oil. (A) Paraffin (B) Olefin (C) Aromatic (D) Naphthene
Last Answer : (C) Aromatic
Description : Aniline point of the diesel is a measure of its __________ content. (A) Aromatic (B) Paraffin (C) Olefin (D) Naphthene
Last Answer : (B) Paraffin
Description : Name the hydrocarbon having the poorest oxidation stability. (A) Naphthene (B) Olefin (C) Paraffin (D) Aromatics
Last Answer : (D) Aromatics
Description : Which of the following is a Naphthene? (A) Butene (B) Butadiene (C) Cyclohexane (D) Acetylene
Last Answer : (C) Cyclohexan
Description : Name the endothermic reaction out of the following: (A) Catalytic cracking (B) Hydrocracking (C) Dehydrogeneration of Naphthene to produce aromatic (D) Catalytic polymerisation
Last Answer : (C) Dehydrogeneration of Naphthene to produce aromatic
Description : Which of the following reactions is undesirable in the production of catalytically reformed gasoline? (A) Dehydrogenation of Naphthene (B) Dehydrogenation of lower paraffins (C) Dehydrocyclization of higher paraffins (D) Isomerisation of paraffins
Last Answer : (B) Dehydrogenation of lower paraffins
Description : Which of the following has the lowest cetane number? (A) Aromatics (B) i-paraffins (C) Naphthene (D) Olefins
Last Answer : (A) Aromatics
Description : In catalytic alkylation, higher iso-butane to olefin ratio gives (A) Low final boiling point product (B) Higher yield (C) Both (A) and (B) (D) Neither (A) nor (B
Last Answer : (A) Low final boiling point product
Description : Alkylation (A) Causes olefins to combine with each other (B) Causes olefins to combine with iso-paraffins (C) Converts iso-paraffin into olefin (D) Converts olefin into paraffin
Last Answer : (B) Causes olefins to combine with iso-paraffins
Description : Pick out the wrong statement. (A) Alkylation produces a larger iso-paraffin (having higher octane number) from the reaction of an olefin with smaller iso-paraffin (B) Catalytic alkylation processes use HF ... (> 1000°C) (D) Gasoline having an octane number of 90 can be produced by alkylation process
Last Answer : (C) All the alkylation processes use very high temperature (> 1000°C)
Description : A carbonyl compound (P) which gives positive iodoform test, undergoes reaction with MeMgBr followed by dehydration to give an olefin (Q). Ozonolysis o
Last Answer : A carbonyl compound (P) which gives positive iodoform test, undergoes reaction with MeMgBr followed by dehydration to give ... (S) is: A. B. C. D.
Last Answer : A carbonyl compound (P) which gives positive iodoform test, undergoes reaction with MeMgBr followed by dehydration ... respectively, are: A. B. C. D.
Last Answer : A carbonyl compound (P) which gives positive iodoform test, undergoes reaction with MeMgBr followed by dehydration to give ... (P) is: A. B. C. D.
Description : Which of the following is not an elastomer? (A) Polyisoprene (B) Neoprene (C) Nitrile-butadiene (D) None of these
Last Answer : (D) None of these
Description : Styrene butadiene rubber (SBR) is never used for making (A) Coated fabrics (B) Front wheel tyres of aeroplanes (i.e., heavy duty tyres)
Last Answer : (B) Front wheel tyres of aeroplanes (i.e., heavy duty tyres)
Description : Styrene butadiene rubber is commercially manufactured by (A) Bulk polymerisation (B) Suspension polymerisation (C) Solution polymerisation (D) Emulsion polymerisation
Last Answer : (D) Emulsion polymerisation
Description : __________ is a copolymer. (A) Styrene butadiene rubber (SBR) (B) Neoprene (C) PVC (D) None of these
Last Answer : (A) Styrene butadiene rubber (SBR
Description : __________ of SBR is adversely affected, if more quantity of styrene is added to butadiene during its co-polymerisation to produce SBR. (A) Percent elongation (B) Resilience (C) Freezing point (D) Strength
Last Answer : (B) Resilience
Description : Starting material for the production of butadiene in India is (A) Naphthalene (B) Benzol (C) Ethyl alcohol (D) Phthalic anhydride
Last Answer : (C) Ethyl alcohol
Description : Nitrile rubber is produced by the polymerisation of (A) Acrylonitrile & butadiene (B) Acrylonitrile & styrene (C) Isobutylene & isoprene (D) None of these
Last Answer : (A) Acrylonitrile & butadiene
Description : Neoprene is chemically known as (A) Polybutadiene (B) Styrene butadiene rubber (SBR) (C) Polyurethane (D) Poly chloroprene
Last Answer : (D) Poly chloroprene
Description : SBR is produced by the copolymerisation of butadiene & styrene by employing emulsion polymerisation. The weight ratio of styrene and butadiene is maintained at (A) 1: 3 (B) 3 : 1 (C) 1 : 2 (D) 2 : 1
Last Answer : (A) 1: 3
Description : Temperature and gage pressure maintained during the manufacture of cold SBR (styrene butadiene rubber) are (A) 5°C and 1 kgf/cm2 (B) - 20°C and 1 kgf/cm2 (C) 0°C and 1 kgf/cm2 (D) 0°C and 3 kgf/cm
Last Answer : (A) 5°C and 1 kgf/cm
Description : Styrene butadiene rubber (SBR) as compared to natural rubber has (A) Poor tensile strength (B) Poorer resistance (C) Greater amount of heat build up heavy loading (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : Neoprene is the trade name of (A) Polyurethane (B) Phenol formaldehyde (C) Polychlorophrene (D) Styrene butadiene rubber (SBR)
Last Answer : (C) Polychlorophrene
Description : Identify the group in which all the polymers mentioned can be used to make fibres. (A) Butadiene copolymers, Polyamides, Urea-formaldehyde (B) Cellulose derivatives, Polyisoprene, Polyethylene (C) Cellulose derivatives, Polyamides, Polyurethane (D) Polypropylene, Poly vinyl chloride, Silicon
Last Answer : (B) Cellulose derivatives, Polyisoprene, Polyethylene
Description : Acrylonitrile-butadiene-styrene (ABS) copolymer, which is produced by blending styrene-acrylonitrile copolymer with butadiene based elastomer, is a/an (A) Rigid foam (B) Engineering plastic (C) Thermosetting polymer
Last Answer : (B) Engineering plastic
Description : Temperature and gage pressure maintained during the manufacture of hot SBR (styrene butadiene rubber) are (A) 50°C and 3 - 4 kg/cm2 (B) 50°C and 1 kgf/cm2 (C) 250°C and 10 kgf/cm2 (D) 250°C and 1 kgf/cm
Last Answer : (A) 50°C and 3 - 4 kg/cm
Description : The main use of butadiene is (A) As a plasticiser for unsaturated polyester (B) In the manufacture of synthetic rubber (C) As an anti-skimming agent in paint (D) None of these
Last Answer : (B) In the manufacture of synthetic rubber
Description : Perspex can be used as a substitute of glass. Its monomer is (A) Methyl methacrylate (B) DMT (C) Butadiene (D) Tetrafluoroethylene
Last Answer : (A) Methyl methacrylate
Description : Styrene butadiene rubber (SBR) is (A) A natural rubber (B) Another name of silicone rubber (C) A synthetic polymer (D) A synthetic monome
Last Answer : (C) A synthetic polymer
Description : Iso-octane is used as a reference substance in the definition of octane number and it is assigned an octane number value of 100. Iso-octane is chemically known as (A) α-methyl naphthalene (B) 2-2-4 tri methyl pentane (C) 1, 3 butadiene (D) Tetra methyl ethylene
Last Answer : (B) 2-2-4 tri methyl pentane
Description : Polymerisation reactor used for the production of styrene butadiene rubber (SBR) is made of (A) Cast iron (B) Stainless steel or glass lined vessel (C) Karbate (D) Wrought iron
Last Answer : (B) Stainless steel or glass lined vessel
Description : Polymerisation reactor used in the production of styrene butadiene rubber (SBR) is made of (A) Stainless steel or glass lined steel (B) Nickel clad steel (C) High silicon cast iron (D) Aluminium
Last Answer : (A) Stainless steel or glass lined steel
Description : Styrene butadiene rubber (SBR) is (A) A natural rubber (B) A synthetic polymer (C) A synthetic monomer (D) Another name of silicone rubber
Last Answer : (B) A synthetic polymer
Description : Neoprene is the trade name of (A) Polyurethane (B) Phenol formaldehyde (C) Polychlorophrene (D) Styrene-butadiene rubber
Description : Neoprene is chemically known as (A) Polybutadiene (B) Styrene butadiene rubber (SBR) (C) Polyurethane (D) Polychlorophrene
Last Answer : (D) Polychlorophrene
Description : Styrene-butadiene-rubber (SBR) as compared to natural rubber has (A) Poorer tensile strength (B) Poorer resistance to oxidation (C) Greater amount of heat build-up under heavy loading (D) All (A), (B) and (C)
Description : The major use of butadiene is (A) As a plasticiser for unsaturated polyester (B) In the manufacture of synthetic rubber (C) As an anti-skinning agent in paint (D) None of these
Description : Starting material for the production of styrene butadiene rubber (SBR) is (A) Ethyl alcohol (B) Ethylene (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (C) Both (A) & (B)
Description : Which one of the following is not an elastomer? (A) Polyisoprene (B) Neoprene (C) Nitrile-butadiene (D) None of these
Description : Nitrile rubber is produced by the polymerisation of (A) Acrylonitrile and butadiene (B) Acrylonitrile and styrene (C) Isobutylene and isoprene (D) None of these
Last Answer : (A) Acrylonitrile and butadiene
Description : __________ rubber is generally used for making 'O' rings used for vacuum sealings. (A) Natural (B) Neoprene (C) Butadiene (D) Nitrile
Last Answer : (B) Neoprene
Description : Rock phosphate constitutes mainly of (A) Fluorapatite (B) Di-calcium phosphate (C) Mono-calcium phosphate (D) Di-ammonium phosphate
Last Answer : (A) Fluorapatite
Description : The main constituent of rock phosphate is (A) Mono-calcium phosphate (B) Di-calcium phosphate (C) Fluorspar (D) None of these
Last Answer : (B) Di-calcium phosphate
Description : Pick out the wrong statement. (A) Exit age description function (E) and internal age distribution function (I) are related as, E = -(dI/dθ) (B) Chemisorption studies are useful in the ... energy (D) A catalyst increases the potential energy barrier over which the reactants must pass to form products
Last Answer : (D) A catalyst increases the potential energy barrier over which the reactants must pass to form products
Description : Which of the following polymer does not contain 1,3-butadiene as one of the monomers?
Last Answer : Which of the following polymer does not contain 1,3-butadiene as one of the monomers? A. Butyl rubber B. Nitrile rubber C. ABS rubber D. SBR
Description : Buna-S is obtained by the copolymerisation of butadiene and:
Last Answer : Buna-S is obtained by the copolymerisation of butadiene and: A. Chloroprene B. styrene C. acrylonitrile D. adipic acid
Description : Natural rubber is a polymer derived from? (1) ethylene (2) propylene (3) isoprene (4) butadiene
Last Answer : (3) isoprene Explanation: Natural rubber is an addition polymer that is obtained as a milky white fluid known as latex from a tropical rubber tree.