__________ of SBR is adversely affected, if more quantity of styrene is added to butadiene during its co-polymerisation to produce SBR. (A) Percent elongation (B) Resilience (C) Freezing point (D) Strength

__________ of SBR is adversely affected, if more quantity of styrene is
added to butadiene during its co-polymerisation to produce SBR.
(A) Percent elongation
(B) Resilience
(C) Freezing point
(D) Strength
by

1 Answer

Answer :

(B) Resilience
by

Related questions

SBR is produced by the copolymerisation of butadiene & styrene by employing emulsion polymerisation. The weight ratio of styrene and butadiene is maintained at (A) 1: 3 (B) 3 : 1 (C) 1 : 2 (D) 2 : 1

Description : SBR is produced by the copolymerisation of butadiene & styrene by employing emulsion polymerisation. The weight ratio of styrene and butadiene is maintained at (A) 1: 3 (B) 3 : 1 (C) 1 : 2 (D) 2 : 1

Last Answer : (A) 1: 3

Polymerisation reactor used for the production of styrene butadiene rubber (SBR) is made of (A) Cast iron (B) Stainless steel or glass lined vessel (C) Karbate (D) Wrought iron

Description : Polymerisation reactor used for the production of styrene butadiene rubber (SBR) is made of (A) Cast iron (B) Stainless steel or glass lined vessel (C) Karbate (D) Wrought iron

Last Answer : (B) Stainless steel or glass lined vessel

Polymerisation reactor used in the production of styrene butadiene rubber (SBR) is made of (A) Stainless steel or glass lined steel (B) Nickel clad steel (C) High silicon cast iron (D) Aluminium

Description : Polymerisation reactor used in the production of styrene butadiene rubber (SBR) is made of (A) Stainless steel or glass lined steel (B) Nickel clad steel (C) High silicon cast iron (D) Aluminium

Last Answer : (A) Stainless steel or glass lined steel

Styrene butadiene rubber (SBR) as compared to natural rubber has (A) Poor tensile strength (B) Poorer resistance (C) Greater amount of heat build up heavy loading (D) All (A), (B) and (C)

Description : Styrene butadiene rubber (SBR) as compared to natural rubber has (A) Poor tensile strength (B) Poorer resistance (C) Greater amount of heat build up heavy loading (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Styrene-butadiene-rubber (SBR) as compared to natural rubber has (A) Poorer tensile strength (B) Poorer resistance to oxidation (C) Greater amount of heat build-up under heavy loading (D) All (A), (B) and (C)

Description : Styrene-butadiene-rubber (SBR) as compared to natural rubber has (A) Poorer tensile strength (B) Poorer resistance to oxidation (C) Greater amount of heat build-up under heavy loading (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

__________ is a copolymer. (A) Styrene butadiene rubber (SBR) (B) Neoprene (C) PVC (D) None of these

Description : __________ is a copolymer. (A) Styrene butadiene rubber (SBR) (B) Neoprene (C) PVC (D) None of these

Last Answer : (A) Styrene butadiene rubber (SBR

Temperature and gage pressure maintained during the manufacture of cold SBR (styrene butadiene rubber) are (A) 5°C and 1 kgf/cm2 (B) - 20°C and 1 kgf/cm2 (C) 0°C and 1 kgf/cm2 (D) 0°C and 3 kgf/cm

Description : Temperature and gage pressure maintained during the manufacture of cold SBR (styrene butadiene rubber) are (A) 5°C and 1 kgf/cm2 (B) - 20°C and 1 kgf/cm2 (C) 0°C and 1 kgf/cm2 (D) 0°C and 3 kgf/cm

Last Answer : (A) 5°C and 1 kgf/cm

Temperature and gage pressure maintained during the manufacture of hot SBR (styrene butadiene rubber) are (A) 50°C and 3 - 4 kg/cm2 (B) 50°C and 1 kgf/cm2 (C) 250°C and 10 kgf/cm2 (D) 250°C and 1 kgf/cm

Description : Temperature and gage pressure maintained during the manufacture of hot SBR (styrene butadiene rubber) are (A) 50°C and 3 - 4 kg/cm2 (B) 50°C and 1 kgf/cm2 (C) 250°C and 10 kgf/cm2 (D) 250°C and 1 kgf/cm

Last Answer : (A) 50°C and 3 - 4 kg/cm

Styrene butadiene rubber (SBR) is never used for making (A) Coated fabrics (B) Front wheel tyres of aeroplanes (i.e., heavy duty tyres)

Description : Styrene butadiene rubber (SBR) is never used for making (A) Coated fabrics (B) Front wheel tyres of aeroplanes (i.e., heavy duty tyres)

Last Answer : (B) Front wheel tyres of aeroplanes (i.e., heavy duty tyres)

Neoprene is chemically known as (A) Polybutadiene (B) Styrene butadiene rubber (SBR) (C) Polyurethane (D) Poly chloroprene

Description : Neoprene is chemically known as (A) Polybutadiene (B) Styrene butadiene rubber (SBR) (C) Polyurethane (D) Poly chloroprene

Last Answer : (D) Poly chloroprene

Neoprene is the trade name of (A) Polyurethane (B) Phenol formaldehyde (C) Polychlorophrene (D) Styrene butadiene rubber (SBR)

Description : Neoprene is the trade name of (A) Polyurethane (B) Phenol formaldehyde (C) Polychlorophrene (D) Styrene butadiene rubber (SBR)

Last Answer : (C) Polychlorophrene

Styrene butadiene rubber (SBR) is (A) A natural rubber (B) Another name of silicone rubber (C) A synthetic polymer (D) A synthetic monome

Description : Styrene butadiene rubber (SBR) is (A) A natural rubber (B) Another name of silicone rubber (C) A synthetic polymer (D) A synthetic monome

Last Answer : (C) A synthetic polymer

Styrene butadiene rubber (SBR) is (A) A natural rubber (B) A synthetic polymer (C) A synthetic monomer (D) Another name of silicone rubber

Description : Styrene butadiene rubber (SBR) is (A) A natural rubber (B) A synthetic polymer (C) A synthetic monomer (D) Another name of silicone rubber

Last Answer : (B) A synthetic polymer

Neoprene is chemically known as (A) Polybutadiene (B) Styrene butadiene rubber (SBR) (C) Polyurethane (D) Polychlorophrene

Description : Neoprene is chemically known as (A) Polybutadiene (B) Styrene butadiene rubber (SBR) (C) Polyurethane (D) Polychlorophrene

Last Answer : (D) Polychlorophrene

Starting material for the production of styrene butadiene rubber (SBR) is (A) Ethyl alcohol (B) Ethylene (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Starting material for the production of styrene butadiene rubber (SBR) is (A) Ethyl alcohol (B) Ethylene (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Styrene butadiene rubber is commercially manufactured by (A) Bulk polymerisation (B) Suspension polymerisation (C) Solution polymerisation (D) Emulsion polymerisation

Description : Styrene butadiene rubber is commercially manufactured by (A) Bulk polymerisation (B) Suspension polymerisation (C) Solution polymerisation (D) Emulsion polymerisation

Last Answer : (D) Emulsion polymerisation

Nitrile rubber is produced by the polymerisation of (A) Acrylonitrile & butadiene (B) Acrylonitrile & styrene (C) Isobutylene & isoprene (D) None of these

Description : Nitrile rubber is produced by the polymerisation of (A) Acrylonitrile & butadiene (B) Acrylonitrile & styrene (C) Isobutylene & isoprene (D) None of these

Last Answer : (A) Acrylonitrile & butadiene

Nitrile rubber is produced by the polymerisation of (A) Acrylonitrile and butadiene (B) Acrylonitrile and styrene (C) Isobutylene and isoprene (D) None of these

Description : Nitrile rubber is produced by the polymerisation of (A) Acrylonitrile and butadiene (B) Acrylonitrile and styrene (C) Isobutylene and isoprene (D) None of these

Last Answer : (A) Acrylonitrile and butadiene

With increasing carbon percent in steel beyond 0.8%, its ultimate tensile strength (UTS) and __________ is not affected. (A) Impact strength (B) Percent elongation (C) Hardness (D) Both 'b' & 'c'

Description : With increasing carbon percent in steel beyond 0.8%, its ultimate tensile strength (UTS) and __________ is not affected. (A) Impact strength (B) Percent elongation (C) Hardness (D) Both 'b' & 'c'

Last Answer : (A) Impact strength

Pick out the wrong statement. (A) For the manufacture of styrene, the major raw materials are benzene and ethylene (B) One important copolymer of styrene is SBR, which is widely used in the manufacture of automobile tyres (C) Manufacture of phenol by chloroben-zene-eaustic process involves. The chlorination of benzene, causticisation and hydrolysis (D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Description : Pick out the wrong statement. (A) For the manufacture of styrene, the major raw materials are benzene and ethylene (B) One important copolymer of styrene is SBR, which is widely ... D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Last Answer : (D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Acrylonitrile-butadiene-styrene (ABS) copolymer, which is produced by blending styrene-acrylonitrile copolymer with butadiene based elastomer, is a/an (A) Rigid foam (B) Engineering plastic (C) Thermosetting polymer

Description : Acrylonitrile-butadiene-styrene (ABS) copolymer, which is produced by blending styrene-acrylonitrile copolymer with butadiene based elastomer, is a/an (A) Rigid foam (B) Engineering plastic (C) Thermosetting polymer

Last Answer : (B) Engineering plastic

Neoprene is the trade name of (A) Polyurethane (B) Phenol formaldehyde (C) Polychlorophrene (D) Styrene-butadiene rubber

Description : Neoprene is the trade name of (A) Polyurethane (B) Phenol formaldehyde (C) Polychlorophrene (D) Styrene-butadiene rubber

Last Answer : (C) Polychlorophrene

Pick out the wrong statement. (A) Cold SBR is superior as compared to hot SBR (B) Polymerisation temperature can modify the properties of SBR (C) Production of cold SBR employs lower pressure as compared to that of hot SBR (D) None of these

Description : Pick out the wrong statement. (A) Cold SBR is superior as compared to hot SBR (B) Polymerisation temperature can modify the properties of SBR (C) Production of cold SBR employs lower pressure as compared to that of hot SBR (D) None of these

Last Answer : (D) None of these

Pick out the wrong statement(A) Cold rubber (SBR) is superior as compared to hot rubber (SBR)(B) Polymerisation temperature can modify the properties of SBR(C) Production of cold SBR employs lower pressure as compared to that ofhot SBR(D) None of these

Description : Pick out the wrong statement (A) Cold rubber (SBR) is superior as compared to hot rubber (SBR) (B) Polymerisation temperature can modify the properties of SBR (C) Production of cold SBR employs lower pressure as compared to that of hot SBR (D) None of these

Last Answer : (D) None of these

Natural rubber is the polymer of : (1) Isoprene (2) Styrene (3) Butadiene (4) Ethylene

Description : Natural rubber is the polymer of : (1) Isoprene (2) Styrene (3) Butadiene (4) Ethylene

Last Answer : (1) Isoprene Explanation: Isoprene was first isolated by thermal decomposition of natural rubber. About 95% of isoprene production is used to produce cis-1,4- polyisoprene—a synthetic version of natural rubber.

Styrene Butadiene Rubber; Neoprene; Thiokole are the examples of?

Description : Styrene Butadiene Rubber; Neoprene; Thiokole are the examples of?

Last Answer : Synthetic rubber

The monomers for Buna-S are 1,3-butadiene and (a) Ethylene glycol (b) Adipic acid (c) Styrene (d) Caprolactum

Description : The monomers for Buna-S are 1,3-butadiene and (a) Ethylene glycol (b) Adipic acid (c) Styrene (d) Caprolactum

Last Answer : Styrene

Natural rubber is the polymer of : (1) Isoprene (2) Styrene (3) Butadiene (4) Ethylene

Description : Natural rubber is the polymer of : (1) Isoprene (2) Styrene (3) Butadiene (4) Ethylene

Last Answer : Isoprene

The ductility of metal is usually expressed in terms of the: A. Yield strength (point where the material is not longer elastic) B. Percent elongation C. Modulus of elasticity (stiffness of the material)

Description : The ductility of metal is usually expressed in terms of the: A. Yield strength (point where the material is not longer elastic) B. Percent elongation C. Modulus of elasticity (stiffness of the material)

Last Answer : B. Percent elongation

Zeigler - Natta catalyst (AlR3 - AlCl3 ) is used in the polymerisation of (A) Vinyl acetate (B) Vinyl chloride (C) Propylene (D) Styrene

Description : Zeigler - Natta catalyst (AlR3 - AlCl3 ) is used in the polymerisation of (A) Vinyl acetate (B) Vinyl chloride (C) Propylene (D) Styrene

Last Answer : (C) Propylene

Chain growth polymerisation is a process, in which the monomers are added in a chain fashion, and it requires an initiator to produce the free radical. An example of chain growth polymerisation products is (A) Nylon-66 (B) Teflon (C) Polyester (D) Bakelite

Description : Chain growth polymerisation is a process, in which the monomers are added in a chain fashion, and it requires an initiator to produce the free radical. An example of chain growth polymerisation products is (A) Nylon-66 (B) Teflon (C) Polyester (D) Bakelite

Last Answer : (B) Teflon

The polymerisation of which of the Following is used in manufacturing of polythene in industry? (1) Methane (2) Styrene (3) Acetylene (4) Ethylene

Description : The polymerisation of which of the Following is used in manufacturing of polythene in industry? (1) Methane (2) Styrene (3) Acetylene (4) Ethylene

Last Answer : (4) Ethylene Explanation: Ethylene is a rather stable molecule that polymerizes only upon contact with catalysts. The conversion is highly exothermic, that is the process releases a lot of heat. ... is the most pervasive technology, which means that metal chlorides or metal oxides are used.

PVC is obtained by the polymerisation of – (1) Propane (2) Vinyl chloride (3) Styrene (4) Acetylene

Description : PVC is obtained by the polymerisation of – (1) Propane (2) Vinyl chloride (3) Styrene (4) Acetylene

Last Answer : (2) Vinyl chloride Explanation: Polyvinyl chloride is produced by polymerization of the monomer vinyl chloride (17CM). Polyvinyl chloride, commonly abbreviated PVC, is the third-most widely produced ... it is cheaper and stronger than more traditional alternatives such as copper or ductile iron.

The polymerisation of which of the following is used in manufacturing of polythene in industry ? (1) Methane (2) Styrene (3) Acetylene (4) Ethylene

Description : The polymerisation of which of the following is used in manufacturing of polythene in industry ? (1) Methane (2) Styrene (3) Acetylene (4) Ethylene

Last Answer : Ethylene

PVC is obtained by the polymerisation of (1) Propane (2) Vinyl chloride (3) Styrene (4) Acetylene

Description : PVC is obtained by the polymerisation of (1) Propane (2) Vinyl chloride (3) Styrene (4) Acetylene

Last Answer : Vinyl chloride

Does freezing meat adversely affect the taste?

Description : Does freezing meat adversely affect the taste?

Last Answer : Short of ice cream, I think freezing anything adversely affects the taste.

.In protein synthesis, the polymerisation of amino acids involves three steps. Which one of the following is not involved in the polymerisation of protein ? (a) Termination (b) Initiation (c) Elongation (d) Transcription

Description : .In protein synthesis, the polymerisation of amino acids involves three steps. Which one of the following is not involved in the polymerisation of protein ? (a) Termination (b) Initiation (c) Elongation (d) Transcription

Last Answer : (a) Termination

In protein synthesis, the polymerisation of amino acids involves three steps. Which one of the following is not involved in the polymerisation of protein ? (a) Termination (b) Initiation (c) Elongation (d) Transcription

Description : In protein synthesis, the polymerisation of amino acids involves three steps. Which one of the following is not involved in the polymerisation of protein ? (a) Termination (b) Initiation (c) Elongation (d) Transcription

Last Answer : Transcription

polymer is termed as an 'elastomer', if its percentage elongation is more than 100%. An elastomer is termed as 'rubber' if its percentage elongation is more than __________ percent. (A) 150 (B) 200 (C) 300 (D) 400

Description : polymer is termed as an 'elastomer', if its percentage elongation is more than 100%. An elastomer is termed as 'rubber' if its percentage elongation is more than __________ percent. (A) 150 (B) 200 (C) 300 (D) 400

Last Answer : Option B

Fermentation is adversely affected by the (A) Presence of air (B) Absence of air (C) High concentration (D) Presence of ammonium salts

Description : Fermentation is adversely affected by the (A) Presence of air (B) Absence of air (C) High concentration (D) Presence of ammonium salts

Last Answer : (C) High concentration

Out of all the elastomers, natural rubber has the longest elongation range & flexibility of the order of __________ percent. (A) 1-1000 (B) 1000-1500 (C) 1500-2000 (D) 2000-2500

Description : Out of all the elastomers, natural rubber has the longest elongation range & flexibility of the order of __________ percent. (A) 1-1000 (B) 1000-1500 (C) 1500-2000 (D) 2000-2500

Last Answer : (A) 1-1000

In case of brasses, with decreasing zinc percentage and increasing copper percentage, its __________ increases. (A) Percentage elongation (B) Brinell hardness (C) Tensile strength (D) All 'a', 'b' & 'c'

Description : In case of brasses, with decreasing zinc percentage and increasing copper percentage, its __________ increases. (A) Percentage elongation (B) Brinell hardness (C) Tensile strength (D) All 'a', 'b' & 'c'

Last Answer : (A) Percentage elongation

Polycaprolactam (Nylon - 6) is produced by the condensation polymerisation of caprolactam at 240-280°C in which the conversion of caprolactam is about __________ percent. (A) 50 (B) 75 (C) 90 (D) 99

Description : Polycaprolactam (Nylon - 6) is produced by the condensation polymerisation of caprolactam at 240-280°C in which the conversion of caprolactam is about __________ percent. (A) 50 (B) 75 (C) 90 (D) 99

Last Answer : (C) 90

If we completely remove the decomposers from an ecosystem, its functioning will be adversely affected, because (a) mineral movement will be blocked (b) the rate of decomposition will be very high (c) energy flow will be blocked (d) herbivores will not receive solar energy.

Description : If we completely remove the decomposers from an ecosystem, its functioning will be adversely affected, because (a) mineral movement will be blocked (b) the rate of decomposition will be very high (c) energy flow will be blocked (d) herbivores will not receive solar energy.

Last Answer : (a) mineral movement will be blocked

The point at which all the three (solid, liquid and gas) phases co-exist, is known as the __________ point. (A) Freezing (B) Triple (C) Boiling (D) Boyle

Description : The point at which all the three (solid, liquid and gas) phases co-exist, is known as the __________ point. (A) Freezing (B) Triple (C) Boiling (D) Boyle

Last Answer : B) Triple

Age and skill selective migration from rural areas has not affected adversely to which of the following demographic attribute? -Geography

Description : Age and skill selective migration from rural areas has not affected adversely to which of the following demographic attribute? -Geography

Last Answer : (d) Balance in age and sex composition

Which announcement of **** Canning, adversely affected the Mughal dynasty in India? -SST 10th

Description : Which announcement of Lord Canning, adversely affected the Mughal dynasty in India? -SST 10th

Last Answer : In 1856, Lord Canning announced that after the death of Bahadur Shah Zafar, his successors would not be allowed to use imperial titles and dignities with their names.

In which of the following interaction both partners are adversely affected ?

Description : In which of the following interaction both partners are adversely affected ?

Last Answer : In which of the following interaction both partners are adversely affected ? A. Mutualism B. Competition C. Predation D. Parasitism

The physical environment has also been adversely affected by human behaviour.

Description : The physical environment has also been adversely affected by human behaviour.

Last Answer : State whether the following statement are true or false with reason : The physical environment has also been adversely affected by human behaviour.

. In which of the following interactions both partners are adversely affected? (a) Parasitism (b) Mutualism (c) Competition (d) Predation

Description : . In which of the following interactions both partners are adversely affected? (a) Parasitism (b) Mutualism (c) Competition (d) Predation

Last Answer : (d) Predation