Description : Aniline point test of an oil qualitatively indicates the __________ content of an oil. (A) Paraffin (B) Olefin (C) Aromatic (D) Naphthene
Last Answer : (C) Aromatic
Description : Name the hydrocarbon having the poorest oxidation stability. (A) Naphthene (B) Olefin (C) Paraffin (D) Aromatics
Last Answer : (D) Aromatics
Description : Butadiene is a/an (A) Di-olefin (B) Naphthene (C) Aromatic (D) Olefin
Last Answer : (A) Di-olefin
Description : Aniline point is the (A) Characteristic property of diesel & lubricating oils (B) Measure of aromatic content of oil (C) Both (A) and (B) (D) Neither (A) nor (B)
Last Answer : (C) Both (A) and (B
Description : High aniline point of a petrofuel (say diesel) indicates that (A) It is highly aromatic in nature (B) It is highly paraffinic in nature (C) It has a very low diesel index (D) Its ignition quality is very poor
Last Answer : (B) It is highly paraffinic in nature
Description : High aniline point of diesel indicates that, it (A) Is highly aromatic (B) Has a large ignition delay (C) Is highly paraffinic (D) Has a low diesel index
Last Answer : (C) Is highly paraffinic
Description : Illuminating characteristics of kerosene is expressed by its (A) Smoke point (B) Aniline point (C) Luminosity number (D) Aromatic content
Last Answer : (C) Luminosity number
Description : Alkylation (A) Causes olefins to combine with each other (B) Causes olefins to combine with iso-paraffins (C) Converts iso-paraffin into olefin (D) Converts olefin into paraffin
Last Answer : (B) Causes olefins to combine with iso-paraffins
Description : Pick out the wrong statement. (A) Alkylation produces a larger iso-paraffin (having higher octane number) from the reaction of an olefin with smaller iso-paraffin (B) Catalytic alkylation processes use HF ... (> 1000°C) (D) Gasoline having an octane number of 90 can be produced by alkylation process
Last Answer : (C) All the alkylation processes use very high temperature (> 1000°C)
Description : Name the endothermic reaction out of the following: (A) Catalytic cracking (B) Hydrocracking (C) Dehydrogeneration of Naphthene to produce aromatic (D) Catalytic polymerisation
Last Answer : (C) Dehydrogeneration of Naphthene to produce aromatic
Description : Equal volumes of aniline and diesel oil when mixed at room temperature (during summer) was found to be completely miscible. It means that the aniline point of the diesel is __________ the room temperature. (A) ... (B) Less than (C) Same as (D) Either more or less; depends on the room temperature
Last Answer : (C) Same as
Description : Aniline point of high speed diesel may be about __________ °C. (A) 35 (B) 70 (C) 105 (D) 150
Last Answer : (B) 70
Description : Diesel index is defined as (A) (°API) × (Aniline Point, °F)/100 (B) (°API) × (Aniline Point, °C)/100 (C) (°API) × (100)/Aniline Point, °F (D) (°API) × (100)/Aniline Point, °C
Last Answer : (A) (°API) × (Aniline Point, °F)/100
Description : Diesel index (an alternative index for expressing the quality of diesel) is (A) Determined by using a test engine (B) Not related to aniline point (C) Equal to cetane number plus 3 (D) All (A), (B) & (C)
Last Answer : (C) Equal to cetane number plus 3
Description : Aniline point is a property of the (A) Diesel (B) LPG (C) Naphtha (D) Gasoline
Last Answer : (C) Naphtha
Description : Aniline point is the temperature at which (A) Equal weight of diesel & the aniline are completely miscible (B) Equal weight of aniline & the test sample are completely miscible (C) Equal volume of aniline & the test sample are completely miscible (D) Aniline vaporises
Last Answer : (C) Equal volume of aniline & the test sample are completely miscible
Description : Which of the following statements is false about aniline? (a) It is a primary aromatic amine. (b) It is a weak base which forms salts with acids. (c) It liberates nitrogen on treatment with ice-cold nitrous acid. (d) It can be prepared by the reduction of nitrobenzene with tin and HCl
Last Answer : It liberates nitrogen on treatment with ice-cold nitrous acid
Description : Which of the following is not an important property of fuel oil/furnace oil? (A) Sulphur content (B) Viscosity (C) Aniline point (D) Flash point
Last Answer : (C) Aniline point
Description : In catalytic alkylation, higher iso-butane to olefin ratio gives (A) Low final boiling point product (B) Higher yield (C) Both (A) and (B) (D) Neither (A) nor (B
Last Answer : (A) Low final boiling point product
Description : The melting point of paraffin wax (which contracts on solidification) __________ with pressure rise. (A) Increases (B) Decreases (C) Remains unchanged (D) Decreases linearly
Last Answer : (A) Increases
Description : Smoke point of kerosene expresses its (A) Burning characteristics (B) Luminosity characteristics (C) Aromatic content directly (D) Lamp wick wetting characteristics
Last Answer : (A) Burning characteristics
Description : Increase in the specific gravity of petroleum products indicates (A) Decrease in paraffin content (B) Increase in thermal energy per unit weight
Last Answer : (A) Decrease in paraffin content
Description : Which of the following is a Naphthene? (A) Butene (B) Butadiene (C) Cyclohexane (D) Acetylene
Last Answer : (C) Cyclohexan
Description : Which of the following reactions is undesirable in the production of catalytically reformed gasoline? (A) Dehydrogenation of Naphthene (B) Dehydrogenation of lower paraffins (C) Dehydrocyclization of higher paraffins (D) Isomerisation of paraffins
Last Answer : (B) Dehydrogenation of lower paraffins
Description : Which of the following has the lowest cetane number? (A) Aromatics (B) i-paraffins (C) Naphthene (D) Olefins
Last Answer : (A) Aromatics
Description : Both asphalt and wax are produced by __________ base crude oils. (A) Naphthenic (B) Asphalt (C) Paraffin (D) Mixed
Last Answer : (C) Paraffin
Description : Specific gravity of a petroleum product gives an indication of its (A) Degree of refinement (B) Hydrocarbon content type (aromatic or paraffinic) (C) Ease of atomisation (D) Sulphur content
Last Answer : (B) Hydrocarbon content type (aromatic or paraffinic)
Description : Pick out the correct statement. (A) Paraffins have higher octane number than corresponding iso-paraffin (B) Paraffins have lower smoke point than aromatics
Last Answer : (B) Paraffins have lower smoke point than aromatics
Description : Which parameter is used for the grading of paraffin waxes? (A) Specific gravity (B) Melting point (C) Viscosity (D) Penetration number
Last Answer : (C) Viscosity
Description : Gum formation in stored gasoline is mainly due to the (A) Alkylation of unsaturated (B) Presence of sulphur (C) Oxidation & polymerisation of unsaturated (D) Higher aromatic content
Last Answer : (B) Presence of sulphur
Description : In catalytic cracking, the (A) Gasoline obtained has a very low octane number (B) Pressure & temperature is very high (C) Gasoline obtained has very high aromatic content (D) Gasoline obtained has very high amount of gum forming compounds
Last Answer : (C) Gasoline obtained has very high aromatic content
Description : In high temperature carbonisation (as compared to low temperature carbonisation) of coal, the (A) Gas yield is less (B) Tar yield is more (C) Ignition temperature of coke produced is less (D) Aromatic content of tar produced is more
Last Answer : (D) Aromatic content of tar produced is more
Description : In high temperature carbonisation of coal compared to low temperature carbonisation (A) Yield of ammonia is less (B) Aromatic content of tar is low (C) H2 content in the coke oven gas is more (D) Calorific value of the coke oven gas is lower
Last Answer : (C) H2 content in the coke oven gas is more
Description : Cetane number of a diesel fuel is the measure of its (A) Ignition delay (B) Smoke point (C) Viscosity (D) Oxidation stability
Last Answer : (A) Ignition delay
Description : A carbonyl compound (P) which gives positive iodoform test, undergoes reaction with MeMgBr followed by dehydration to give an olefin (Q). Ozonolysis o
Last Answer : A carbonyl compound (P) which gives positive iodoform test, undergoes reaction with MeMgBr followed by dehydration to give ... (S) is: A. B. C. D.
Last Answer : A carbonyl compound (P) which gives positive iodoform test, undergoes reaction with MeMgBr followed by dehydration ... respectively, are: A. B. C. D.
Last Answer : A carbonyl compound (P) which gives positive iodoform test, undergoes reaction with MeMgBr followed by dehydration to give ... (P) is: A. B. C. D.
Description : Which of the following tests is not done for transformer oil? (A) Flash point and acid value (B) Aniline point (C) Dielectric strength (D) Copper strip corrosion test
Last Answer : (B) Aniline poin
Description : A multigrade lubricating oil means an oil having high (A) Viscosity index (B) Viscosity (C) Aniline point (D) Flash point
Last Answer : (A) Viscosity index
Description : Assertion: Euro II norms are framed to reduce the content of CO and aromatic compounds from fuels. Reason: These compounds lead to reduced visibility
Last Answer : Assertion: Euro II norms are framed to reduce the content of CO and aromatic compounds from fuels. Reason ... and Reason are false, then mark (4).
Description : __________ base crude oil is also called asphaltic crude. (A) Paraffinic (B) Naphthenic (C) Mixed (D) Aromatic
Last Answer : (B) Naphthenic
Description : Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil
Last Answer : (A) Higher yield of straight run gasoline
Description : Reforming converts (A) Olefins into paraffins (B) Naphthenes into aromatics (C) Naphthenes into olefins (D) Naphthenes into paraffin
Last Answer : (B) Naphthenes into aromatics
Description : Calorific value of (A) Light paraffinic fuel oils is equal to that of equivalent olefins (B) n-paraffin is lower than that of iso-paraffins of the same compounds (C) Light paraffinic fuel ... than that of equivalent olefins (D) Light paraffinic fuel oils is lower than that of equivalent olefins
Last Answer : (C) Light paraffinic fuel oils is higher than that of equivalent olefins
Description : Which of the following, when pyrolysed, produces Perchloroethylene? (A) Ethylene dichloride (B) Chlorobenzene (C) Carbon tetrachloride (D) Chlorinated paraffin
Last Answer : (C) Carbon tetrachloride
Description : In electrophilic aromatic substitution reactions a chlorine substituent __________. (a) is a deactivator and a m-director (b) is a deactivator and an o,p-director (c) is an activator and a m-director (d) is an activator and an o,p-director
Last Answer : is a deactivator and an o,p-director
Description : Aromatic molecules contain __________ π electrons. (a) no (b) 4n + 2 (with n being an integer) (c) 4n + 2 (with n being 0.5) (d) 4n (with n an integer)
Last Answer : 4n + 2 (with n being an integer)
Description : A parallel polarized wave is incident from air into paraffin having relative permittivity 3, the value of its Brewster angle is: (1) 0° (2) 30° (3) 45° (4) 60°
Last Answer : A parallel polarized wave is incident from air into paraffin having relative permittivity 3, the value of its Brewster angle is:60°
Description : Phthalic anhydride is produced by the oxidation of (A) Naphthalene (B) Benzene (C) Toluene (D) Aniline
Last Answer : (B) Benzene
Description : Gulf wax/paraffin in cooking?
Last Answer : I think it would matter as to how much wax your recipe calls for. My grandmother makes coconut balls every year for Christmas and uses Gulf Wax and they have never had a waxy coating.