Alkylation (A) Causes olefins to combine with each other(B) Causes olefins to combine with iso-paraffins(C) Converts iso-paraffin into olefin(D) Converts olefin into paraffin

Alkylation
(A) Causes olefins to combine with each other
(B) Causes olefins to combine with iso-paraffins
(C) Converts iso-paraffin into olefin
(D) Converts olefin into paraffin
by

1 Answer

Answer :

(B) Causes olefins to combine with iso-paraffins
by

Related questions

Pick out the wrong statement. (A) Alkylation produces a larger iso-paraffin (having higher octane number) from the reaction of an olefin with smaller iso-paraffin (B) Catalytic alkylation processes use HF, AlCl3 & H2SO4 as Catalysts (C) All the alkylation processes use very high temperature (> 1000°C) (D) Gasoline having an octane number of 90 can be produced by alkylation process

Description : Pick out the wrong statement. (A) Alkylation produces a larger iso-paraffin (having higher octane number) from the reaction of an olefin with smaller iso-paraffin (B) Catalytic alkylation processes use HF ... (> 1000°C) (D) Gasoline having an octane number of 90 can be produced by alkylation process

Last Answer : (C) All the alkylation processes use very high temperature (> 1000°C)

Calorific value of (A) Light paraffinic fuel oils is equal to that of equivalent olefins (B) n-paraffin is lower than that of iso-paraffins of the same compounds (C) Light paraffinic fuel oils is higher than that of equivalent olefins (D) Light paraffinic fuel oils is lower than that of equivalent olefins

Description : Calorific value of (A) Light paraffinic fuel oils is equal to that of equivalent olefins (B) n-paraffin is lower than that of iso-paraffins of the same compounds (C) Light paraffinic fuel ... than that of equivalent olefins (D) Light paraffinic fuel oils is lower than that of equivalent olefins

Last Answer : (C) Light paraffinic fuel oils is higher than that of equivalent olefins

Reforming converts (A) Olefins into paraffins (B) Naphthenes into aromatics (C) Naphthenes into olefins (D) Naphthenes into paraffin

Description : Reforming converts (A) Olefins into paraffins (B) Naphthenes into aromatics (C) Naphthenes into olefins (D) Naphthenes into paraffin

Last Answer : (B) Naphthenes into aromatics

In catalytic alkylation, higher iso-butane to olefin ratio gives (A) Low final boiling point product (B) Higher yield (C) Both (A) and (B) (D) Neither (A) nor (B

Description : In catalytic alkylation, higher iso-butane to olefin ratio gives (A) Low final boiling point product (B) Higher yield (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (A) Low final boiling point product

__________ converts n-paraffins to i-paraffins. (A) Alkylation (B) Polymerisation (C) Isomerisation (D) None of these

Description : __________ converts n-paraffins to i-paraffins. (A) Alkylation (B) Polymerisation (C) Isomerisation (D) None of these

Last Answer : (C) Isomerisation

Pick out the correct statement. (A) Paraffins have higher octane number than corresponding iso-paraffin (B) Paraffins have lower smoke point than aromatics

Description : Pick out the correct statement. (A) Paraffins have higher octane number than corresponding iso-paraffin (B) Paraffins have lower smoke point than aromatics

Last Answer : (B) Paraffins have lower smoke point than aromatics

Isomerisation converts the __________ tot-paraffins. (A) Paraffins (B) Olefins (C) Naphthenes (D) None of these

Description : Isomerisation converts the __________ tot-paraffins. (A) Paraffins (B) Olefins (C) Naphthenes (D) None of these

Last Answer : (A) Paraffins

Polymerisation (A) Produces i-octane from cracked gases containing i-butane and butene (B) Causes olefins to combine with each other (C) Causes aromatics to combine with each other (D) Is aimed at producing lubricating oil

Description : Polymerisation (A) Produces i-octane from cracked gases containing i-butane and butene (B) Causes olefins to combine with each other (C) Causes aromatics to combine with each other (D) Is aimed at producing lubricating oil

Last Answer : (B) Causes olefins to combine with each other

Aniline point test of an oil qualitatively indicates the __________ content of an oil. (A) Paraffin (B) Olefin (C) Aromatic (D) Naphthene

Description : Aniline point test of an oil qualitatively indicates the __________ content of an oil. (A) Paraffin (B) Olefin (C) Aromatic (D) Naphthene

Last Answer : (C) Aromatic

Aniline point of the diesel is a measure of its __________ content. (A) Aromatic (B) Paraffin (C) Olefin (D) Naphthene

Description : Aniline point of the diesel is a measure of its __________ content. (A) Aromatic (B) Paraffin (C) Olefin (D) Naphthene

Last Answer : (B) Paraffin

Name the hydrocarbon having the poorest oxidation stability. (A) Naphthene (B) Olefin (C) Paraffin (D) Aromatics

Description : Name the hydrocarbon having the poorest oxidation stability. (A) Naphthene (B) Olefin (C) Paraffin (D) Aromatics

Last Answer : (D) Aromatics

Smoke point of a test sample of kerosene is found to be 15 mm. On removal of __________ from it, the smoke point rises to 25 mm. (A) n-paraffins (B) Olefins (C) Aromatics (D) None of these

Description : Smoke point of a test sample of kerosene is found to be 15 mm. On removal of __________ from it, the smoke point rises to 25 mm. (A) n-paraffins (B) Olefins (C) Aromatics (D) None of these

Last Answer : (C) Aromatics

Which of the following has the highest octane number? (A) Aromatics(B) i-paraffins(C) Naphthenes(D) Olefins

Description : Which of the following has the highest octane number? (A) Aromatics (B) i-paraffins (C) Naphthenes (D) Olefins

Last Answer : (A) Aromatics

The main reaction in reforming is the (A) Dehydrogenation of naphthenes (B) Hydrogenation of naphthenes (C) Hydrocracking of paraffins (D) Saturation of olefins

Description : The main reaction in reforming is the (A) Dehydrogenation of naphthenes (B) Hydrogenation of naphthenes (C) Hydrocracking of paraffins (D) Saturation of olefins

Last Answer : (A) Dehydrogenation of naphthenes

Pyrolysis of kerosene or natural gasoline is done to produce mainly the (A) Olefins and aromatics (B) Lighter paraffins (C) Stabilised gasoline (D) Diesel

Description : Pyrolysis of kerosene or natural gasoline is done to produce mainly the (A) Olefins and aromatics (B) Lighter paraffins (C) Stabilised gasoline (D) Diesel

Last Answer : (A) Olefins and aromatic

H/C ratio (by weight) for the same number of carbon atoms is the highest in case of (A) Aromatics (B) Paraffins (C) Olefins (D) Naphthenes

Description : H/C ratio (by weight) for the same number of carbon atoms is the highest in case of (A) Aromatics (B) Paraffins (C) Olefins (D) Naphthenes

Last Answer : (D) Naphthenes

Which of the following is the easiest to crack? (A) Paraffins (B) Olefins (C) Naphthenes (D) Aromatics

Description : Which of the following is the easiest to crack? (A) Paraffins (B) Olefins (C) Naphthenes (D) Aromatics

Last Answer : (A) Paraffins

Which of the following has the lowest cetane number? (A) Aromatics (B) i-paraffins (C) Naphthene (D) Olefins

Description : Which of the following has the lowest cetane number? (A) Aromatics (B) i-paraffins (C) Naphthene (D) Olefins

Last Answer : (A) Aromatics

Coal tar (produced by high temperature carbonisation) is the main source of (A) Aromatic compounds (B) Aliphatic compounds (C) Paraffins (D) Olefins

Description : Coal tar (produced by high temperature carbonisation) is the main source of (A) Aromatic compounds (B) Aliphatic compounds (C) Paraffins (D) Olefins

Last Answer : (A) Aromatic compounds

What is the difference between paraffins and olefins?

Description : What is the difference between paraffins and olefins?

Last Answer : Need answer

For C.I. engines fuel most preferred are a) aromatics b) paraffins c) olefins d) napthenes

Description : For C.I. engines fuel most preferred are a) aromatics b) paraffins c) olefins d) napthenes

Last Answer : Answer: b Explanation: For C.I. engines fuel most preferred are paraffins and for S.I. engines fuel most preferred are aromatics.

For S.I. engines fuel most preferred are a) aromatics b) paraffins c) olefins d) napthenes

Description : For S.I. engines fuel most preferred are a) aromatics b) paraffins c) olefins d) napthenes

Last Answer : Answer: a Explanation: For S.I. engines fuel most preferred are aromatics while for C.I. engines fuel most preferred are paraffins.

In a SI engine, which one of the following is the correct order of the fuels with increasing detonation tendency? (a) Paraffins, olefins, naphthenes, aromatics (b) Aromatics, naphthenes, paraffins, olefins (c) Naphthenes, olefins, aromatics, paraffins (d) Aromatics, naphthenes, olefins, paraffins

Description : In a SI engine, which one of the following is the correct order of the fuels with increasing detonation tendency? (a) Paraffins, olefins, naphthenes, aromatics (b) Aromatics, naphthenes, paraffins, olefins (c) Naphthenes, olefins, aromatics, paraffins (d) Aromatics, naphthenes, olefins, paraffins

Last Answer : Ans :d

Which of the following hydrocarbons of same carbon atoms has minimum smoking tendency? (A) Paraffins (B) Naphthenes (C) Aromatics (D) Iso-paraffins

Description : Which of the following hydrocarbons of same carbon atoms has minimum smoking tendency? (A) Paraffins (B) Naphthenes (C) Aromatics (D) Iso-paraffins

Last Answer : (A) Paraffins

Butadiene is a/an (A) Di-olefin (B) Naphthene (C) Aromatic (D) Olefin

Description : Butadiene is a/an (A) Di-olefin (B) Naphthene (C) Aromatic (D) Olefin

Last Answer : (A) Di-olefin

Used as a laxative, liquid paraffin has the following drawbacks except: A. It interferes with absorption of fat soluble vitamins B. It is unpleasant to swallow C. It causes griping D. It can produce foreign body granulomas

Description : Used as a laxative, liquid paraffin has the following drawbacks except: A. It interferes with absorption of fat soluble vitamins B. It is unpleasant to swallow C. It causes griping D. It can produce foreign body granulomas

Last Answer : C. It causes griping

Which one of the following processes aims at producing higher yield of gaseous unsaturated hydrocarbons and aromatics like benzene & toluene? (A) Reforming (B) Pyrolysis (C) Alkylation (D) Hydrocracking

Description : Which one of the following processes aims at producing higher yield of gaseous unsaturated hydrocarbons and aromatics like benzene & toluene? (A) Reforming (B) Pyrolysis (C) Alkylation (D) Hydrocracking

Last Answer : (A) Reforming

In petroleum refining, the process used for conversion of hydrocarbons to aromatics is (A) Catalytic cracking (B) Catalytic reforming (C) Hydrotreating (D) Alkylation

Description : In petroleum refining, the process used for conversion of hydrocarbons to aromatics is (A) Catalytic cracking (B) Catalytic reforming (C) Hydrotreating (D) Alkylation

Last Answer : (B) Catalytic reforming

Gum formation in stored gasoline is mainly due to the (A) Alkylation of unsaturated (B) Presence of sulphur (C) Oxidation & polymerisation of unsaturated (D) Higher aromatic content

Description : Gum formation in stored gasoline is mainly due to the (A) Alkylation of unsaturated (B) Presence of sulphur (C) Oxidation & polymerisation of unsaturated (D) Higher aromatic content

Last Answer : (B) Presence of sulphur

Catalyst used in alkylation process is (A) Sulphuric acid (B) Nickel (C) Silica gel (D) Alumina

Description : Catalyst used in alkylation process is (A) Sulphuric acid (B) Nickel (C) Silica gel (D) Alumina

Last Answer : (A) Sulphuric acid

Concentration of H2SO4 catalyst in alkylation is kept between 90-98%, because H2SO4 having concentration. (A) Less than 90% promotes polymerisation (B) More than 98% promotes cracking (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Concentration of H2SO4 catalyst in alkylation is kept between 90-98%, because H2SO4 having concentration. (A) Less than 90% promotes polymerisation (B) More than 98% promotes cracking (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Sulphuric acid is used as a catalyst in the (A) Hydrogenation of oils (B) Gas phase oxidation of SO2 in chamber process (C) Alkylation of hydrocarbons(D) None of these

Description : Sulphuric acid is used as a catalyst in the (A) Hydrogenation of oils (B) Gas phase oxidation of SO2 in chamber process (C) Alkylation of hydrocarbons (D) None of these

Last Answer : (C) Alkylation of hydrocarbons

Styrene is produced from ethyl benzene by the process of (A) Dehydrogenation (B) Oxidation (C) Alkylation (D) Dehydration

Description : Styrene is produced from ethyl benzene by the process of (A) Dehydrogenation (B) Oxidation (C) Alkylation (D) Dehydration

Last Answer : (A) Dehydrogenation

Isopropyl benzene produced by alkylation of benzene with propylene is known as (A) Neoprene (B) Cumene (C) Gelatin (D) Mercaptans

Description : Isopropyl benzene produced by alkylation of benzene with propylene is known as (A) Neoprene (B) Cumene (C) Gelatin (D) Mercaptans

Last Answer : (B) Cumene

Cumene (isopropyl benzene) is made by (A) Oxidation of naphthalene (B) Propylene alkylation of benzene (C) Polymerisation of a mixture of benzene & propylene (D) None of these

Description : Cumene (isopropyl benzene) is made by (A) Oxidation of naphthalene (B) Propylene alkylation of benzene (C) Polymerisation of a mixture of benzene & propylene (D) None of these

Last Answer : (B) Propylene alkylation of benzene

Styrene is produced from ethyl benzene by the process of (A) Dehydrogenation (B) Oxidation (C) Alkylation (D) Dehydration

Description : Styrene is produced from ethyl benzene by the process of (A) Dehydrogenation (B) Oxidation (C) Alkylation (D) Dehydration

Last Answer : (A) Dehydrogenation

A carbonyl compound (P) which gives positive iodoform test, undergoes reaction with MeMgBr followed by dehydration to give an olefin (Q). Ozonolysis o

Description : A carbonyl compound (P) which gives positive iodoform test, undergoes reaction with MeMgBr followed by dehydration to give an olefin (Q). Ozonolysis o

Last Answer : A carbonyl compound (P) which gives positive iodoform test, undergoes reaction with MeMgBr followed by dehydration to give ... (S) is: A. B. C. D.

A carbonyl compound (P) which gives positive iodoform test, undergoes reaction with MeMgBr followed by dehydration to give an olefin (Q). Ozonolysis o

Description : A carbonyl compound (P) which gives positive iodoform test, undergoes reaction with MeMgBr followed by dehydration to give an olefin (Q). Ozonolysis o

Last Answer : A carbonyl compound (P) which gives positive iodoform test, undergoes reaction with MeMgBr followed by dehydration ... respectively, are: A. B. C. D.

A carbonyl compound (P) which gives positive iodoform test, undergoes reaction with MeMgBr followed by dehydration to give an olefin (Q). Ozonolysis o

Description : A carbonyl compound (P) which gives positive iodoform test, undergoes reaction with MeMgBr followed by dehydration to give an olefin (Q). Ozonolysis o

Last Answer : A carbonyl compound (P) which gives positive iodoform test, undergoes reaction with MeMgBr followed by dehydration to give ... (P) is: A. B. C. D.

In catalytic cracking process, olefins crack __________ times faster than in thermal cracking process. (A) 100 (B) 200-300 (C) 1000-10000 (D) 10

Description : In catalytic cracking process, olefins crack __________ times faster than in thermal cracking process. (A) 100 (B) 200-300 (C) 1000-10000 (D) 10

Last Answer : (C) 1000-10000

Petroleum (A) Is optically active (B) Constitutes mainly of olefins (C) Does not contain asphalt (D) Does not contain aromatics

Description : Petroleum (A) Is optically active (B) Constitutes mainly of olefins (C) Does not contain asphalt (D) Does not contain aromatics

Last Answer : (A) Is optically active

Which is almost absent in crude petroleum? (A) Olefins (B) Mercaptans (C) Naphthenes (D) Cycloparaffins

Description : Which is almost absent in crude petroleum? (A) Olefins (B) Mercaptans (C) Naphthenes (D) Cycloparaffins

Last Answer : (B) Mercaptans

Olefins are (A) Saturated hydrocarbons(B) Unsaturated cyclic compounds (hydrocarbons)(C) Present in substantially good quantity in crude petroleum(D) None of these

Description : Olefins are (A) Saturated hydrocarbons (B) Unsaturated cyclic compounds (hydrocarbons) (C) Present in substantially good quantity in crude petroleum (D) None of these

Last Answer : (D) None of these

Feedstock for polymerisation is (A) Naphtha (B) Cracked gases rich in C2 & C4 olefins (C) Low boiling aromatics (D) None of these

Description : Feedstock for polymerisation is (A) Naphtha (B) Cracked gases rich in C2 & C4 olefins (C) Low boiling aromatics (D) None of these

Last Answer : (B) Cracked gases rich in C2 & C4 olefins

Liquefied Petroleum Gas (LPG) is mainly a mixture of (A) Propane & butane (B) Methane & ethane (C) High boiling olefins (D) High boiling naphthenes

Description : Liquefied Petroleum Gas (LPG) is mainly a mixture of (A) Propane & butane (B) Methane & ethane (C) High boiling olefins (D) High boiling naphthenes

Last Answer : (A) Propane & butane

The general formula of naphthenes is(A) CnH2n + 2(B) CnH2n-6(where, n ≥ 6)(C) CnHn-4(D) Same as that for olefins i.e. CnH2n

Description : The general formula of naphthenes is (A) CnH2n + 2 (B) CnH2n-6 (where, n ≥ 6) (C) CnHn-4 (D) Same as that for olefins i.e. CnH2n

Last Answer : (B) CnH2n-6 (where, n ≥ 6)

CnH2n is the general formula for (A) Olefins (B) Naphthenes (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : CnH2n is the general formula for (A) Olefins (B) Naphthenes (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

What single isomer would be found in greatest yield when isopropyl chloride undergoes a Friedel-Crafts alkylation with t-butylbenzene ?

Description : What single isomer would be found in greatest yield when isopropyl chloride undergoes a Friedel-Crafts alkylation with t-butylbenzene ?

Last Answer : What single isomer would be found in greatest yield when isopropyl chloride undergoes a Friedel-Crafts ... o-isopropyl-t-butylbenzene D. none of these

Statement-1: In protic solvents phenoxide ion is alkylated primarily at C-alkylation whereas in polar aprotic solvents O-alkylation with alkyl halide.

Description : Statement-1: In protic solvents phenoxide ion is alkylated primarily at C-alkylation whereas in polar aprotic solvents O-alkylation with alkyl halide.

Last Answer : Statement-1: In protic solvents phenoxide ion is alkylated primarily at C-alkylation whereas in polar ... Statement-1 is false, Statement-2 is true

Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming process (C) The most ideal feedstock for thermal reforming is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Description : Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming ... is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Last Answer : (C) The most ideal feedstock for thermal reforming is dearomatised kerosene