Higher vapour pressure of gasoline indicates(A) Low flash point(B) High breathing loss(C) Both (A) and (B)(D) Neither (A) nor (B

Higher vapour pressure of gasoline indicates
(A) Low flash point
(B) High breathing loss
(C) Both (A) and (B)
(D) Neither (A) nor (B
by

1 Answer

Answer :

(D) Neither (A) nor (B
by

Related questions

Breathing loss" on storage of gasoline occurs due to the (A) Presence of unsaturated air (B) Fluctuation of ambient temperature during day and night (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Breathing loss" on storage of gasoline occurs due to the (A) Presence of unsaturated air (B) Fluctuation of ambient temperature during day and night (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (B) Fluctuation of ambient temperature during day and night

Higher viscosity of lubricating oil usually signifies (A) Lower Reid vapour pressure (B) Higher acid number (C) Higher flash point and fire point (D) Lower flash point and fire point

Description : Higher viscosity of lubricating oil usually signifies (A) Lower Reid vapour pressure (B) Higher acid number (C) Higher flash point and fire point (D) Lower flash point and fire point

Last Answer : (C) Higher flash point and fire point

In catalytic alkylation, higher iso-butane to olefin ratio gives (A) Low final boiling point product (B) Higher yield (C) Both (A) and (B) (D) Neither (A) nor (B

Description : In catalytic alkylation, higher iso-butane to olefin ratio gives (A) Low final boiling point product (B) Higher yield (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (A) Low final boiling point product

Coke oven gas produced by high temperature carbonisation of coal (as compared to that produced by low temperature carbonisation), has (A) Higher calorific value (B) Lower hydrogen content (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Coke oven gas produced by high temperature carbonisation of coal (as compared to that produced by low temperature carbonisation), has (A) Higher calorific value (B) Lower hydrogen content (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

Pick out the correct statement about catalytic polymerisation. (A) H2SO4 polymerisation process gives gasoline rich in unsaturates (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive (C) Both (A) and (B) (D) Neither (A) nor (B

Description : Pick out the correct statement about catalytic polymerisation. (A) H2SO4 polymerisation process gives gasoline rich in unsaturates (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive

Adiabatic compression of a saturated water vapour makes it (A) Supersaturated (B) Superheated (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Adiabatic compression of a saturated water vapour makes it (A) Supersaturated (B) Superheated (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : B) Superheated

Reid vapour pressure of gasoline is the measure of its (A) Pour point (B) Cloud point (C) Vapour locking tendency (D) Carbon residue

Description : Reid vapour pressure of gasoline is the measure of its (A) Pour point (B) Cloud point (C) Vapour locking tendency (D) Carbon residue

Last Answer : (C) Vapour locking tendency

For the reversible exothermic reaction, N2 + 3H2 ⇌ 2NH3, increase of pressure would (A) Shift the equilibrium towards right (B) Give higher yield of NH3 (C) Both (B) and (C) (D) Neither (A) nor (B)

Description : For the reversible exothermic reaction, N2 + 3H2 ⇌ 2NH3, increase of pressure would (A) Shift the equilibrium towards right (B) Give higher yield of NH3 (C) Both (B) and (C) (D) Neither (A) nor (B)

Last Answer : (C) Both (B) and (C)

In the reaction, represented by, 2SO2 + O2 ⇌ 2SO3; ΔH = - 42 kcal; the forward reaction will be favoured by (A) Low temperature (B) High pressure (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : In the reaction, represented by, 2SO2 + O2 ⇌ 2SO3; ΔH = - 42 kcal; the forward reaction will be favoured by (A) Low temperature (B) High pressure (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Nominal Pipe Size (NPS) of a pipe less than 12 inches in diameter indicates its(A) Inner diameter(B) Outer diameter(C) Thickness(D) Neither inner nor outer diameter

Description : Nominal Pipe Size (NPS) of a pipe less than 12 inches in diameter indicates its (A) Inner diameter (B) Outer diameter (C) Thickness (D) Neither inner nor outer diameter

Last Answer : (D) Neither inner nor outer diameter

One mole feed of a binary mixture of a given composition is flash vaporised at a fixed P and T. If Raoult's law is obeyed, then changing the feed composition would effect (A) The product composition but not the fraction vaporised (B) The product composition as well as the fraction vaporised (C) The fraction vaporised but not the product composition (D) Neither the product composition nor the fraction vaporised

Description : One mole feed of a binary mixture of a given composition is flash vaporised at a fixed P and T. If Raoult's law is obeyed, then changing the feed composition would effect (A) ... The fraction vaporised but not the product composition (D) Neither the product composition nor the fraction vaporised

Last Answer : (C) The fraction vaporised but not the product composition

Steam distillation is used for separation of high boiling (A) Substances from non-volatile impurities (B) Volatile impurity from still higher boiling substances (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Steam distillation is used for separation of high boiling (A) Substances from non-volatile impurities (B) Volatile impurity from still higher boiling substances (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Stabilisation of gasoline (petrol) means (A) Removal of dissolved gases from it (B) Increasing its oxidation stability (C) Improving its lead susceptibility (D) Increasing its vapour pressure

Description : Stabilisation of gasoline (petrol) means (A) Removal of dissolved gases from it (B) Increasing its oxidation stability (C) Improving its lead susceptibility (D) Increasing its vapour pressure

Last Answer : (A) Removal of dissolved gases from it

Actual flame temperature is always lower than the adiabatic flame temperature, because there is (A) No possibility of obtaining complete combustion at high temperature (B) Always loss of heat from the flame (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Actual flame temperature is always lower than the adiabatic flame temperature, because there is (A) No possibility of obtaining complete combustion at high temperature (B) Always loss of heat from the flame (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Flash point of motor gasoline may be around __________ °C. (A) 10 (B) 45 (C) 100 (D) 150

Description : Flash point of motor gasoline may be around __________ °C. (A) 10 (B) 45 (C) 100 (D) 150

Last Answer : (B) 45

__________ increases with increase in pressure. (A) The melting point of wax (B) The boiling point of a liquid (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : __________ increases with increase in pressure. (A) The melting point of wax (B) The boiling point of a liquid (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Thickness of stock does not affect the fuel economy of furnaces, if thematerial to be heated is of(A) Low emissivity(B) High thermal conductivity(C) Both (A) and (B)(D) Neither (A) nor (B)

Description : Thickness of stock does not affect the fuel economy of furnaces, if thematerial to be heated is of (A) Low emissivity (B) High thermal conductivity (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

The effect of solid boundary on the fluid flow is confined to the boundary layer, except for fluids (A) Having high viscosities (B) Moving at low velocities (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The effect of solid boundary on the fluid flow is confined to the boundary layer, except for fluids (A) Having high viscosities (B) Moving at low velocities (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Refrigeration cycle (A) Violates second law of thermodynamics (B) Involves transfer of heat from low temperature to high temperature (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Refrigeration cycle (A) Violates second law of thermodynamics (B) Involves transfer of heat from low temperature to high temperature (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (B) Involves transfer of heat from low temperature to high temperature

Prime coking coal is always blended with medium or non- coking coal before carbonisation (A) To check against its excessive swelling during heating, which may exert high pressure and damage coke oven walls (B) Because, it alone produces unreactive coke (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Prime coking coal is always blended with medium or non- coking coal before carbonisation (A) To check against its excessive swelling during heating, which may exert high pressure and damage coke oven walls (B) Because, it alone produces unreactive coke (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Higher pressure in the reforming reactor (A) Increases coke formation (B) Increases the rate of reaction(C) Produces high octane number gasoline(D) None of these

Description : Higher pressure in the reforming reactor (A) Increases coke formation (B) Increases the rate of reaction (C) Produces high octane number gasoline (D) None of these

Last Answer : (D) None of these

Use of water as a manometric liquid suffers from the disadvantage of its (A) Low vapour pressure (B) Corrosive nature (C) High vapour pressure (D) High boiling point

Description : Use of water as a manometric liquid suffers from the disadvantage of its (A) Low vapour pressure (B) Corrosive nature (C) High vapour pressure (D) High boiling point

Last Answer : (C) High vapour pressure

A volume of air at constant barometric pressure may be brought to dew point by (A) Increasing the temperature (B) Decreasing the temperature (C) Neither (a) nor (b) (D) Both (a) and (b)

Description : A volume of air at constant barometric pressure may be brought to dew point by (A) Increasing the temperature (B) Decreasing the temperature (C) Neither (a) nor (b) (D) Both (a) and (b)

Last Answer : Answer: Option B

A centrifugal pump is required to be primed before starting if it is located (A) At higher level than water level of reservoir (B) At lower level than water level of reservoir (C) Both (a) and (b) (D) Neither (a) nor (b)

Description : A centrifugal pump is required to be primed before starting if it is located  (A) At higher level than water level of reservoir  (B) At lower level than water level of reservoir  (C) Both (a) and (b)  (D) Neither (a) nor (b) 

Last Answer : (A) At higher level than water level of reservoir

Boiling range of motor gasoline is an indication of the (A) Case of starting (B) Rate of acceleration (C) Vapour locking tendency (D) All (A), (B) and (C)

Description : Boiling range of motor gasoline is an indication of the (A) Case of starting (B) Rate of acceleration (C) Vapour locking tendency (D) All (A), (B) and (C)

Last Answer : (B) Rate of acceleration

Use of natural draft cooling tower is practised, when the air has low (A) Humidity (B) Temperature (C) Both 'a' & 'b' (D) Neither 'a' nor 'b'

Description : Use of natural draft cooling tower is practised, when the air has low (A) Humidity (B) Temperature (C) Both 'a' & 'b' (D) Neither 'a' nor 'b'

Last Answer : (C) Both 'a' & 'b

Oil produced by solvent extraction (A) Has low free fatty acid content (B) Is odourless (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Oil produced by solvent extraction (A) Has low free fatty acid content (B) Is odourless (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

An ideal liquid refrigerant should (A) Not have a sub-atmospheric vapour pressure at the temperature in the refrigerator coils (B) Not have unduly high vapour pressure at the condenser temperature (C) Both (A) and (B) (D) Have low specific heat

Description : An ideal liquid refrigerant should (A) Not have a sub-atmospheric vapour pressure at the temperature in the refrigerator coils (B) Not have unduly high vapour pressure at the condenser temperature (C) Both (A) and (B) (D) Have low specific heat

Last Answer : (C) Both (A) and (B)

The quantity of seepage of water through soils is proportional to (A) Coefficient of permeability of soil (B) Total head loss through the soil (C) Neither (a) nor (b) (D) Both (a) and (b)

Description : The quantity of seepage of water through soils is proportional to (A) Coefficient of permeability of soil (B) Total head loss through the soil (C) Neither (a) nor (b) (D) Both (a) and (b)

Last Answer : Answer: Option D

The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant __________ filtration. (A) Rate(B) Pressure(C) Both (A) & (B)(D) Neither (A) nor (B

Description : The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant __________ filtration. (A) Rate (B) Pressure (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

Gaseous diffusion co-efficient increases with increase in the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Gaseous diffusion co-efficient increases with increase in the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Temperature

The amount of steam required per unit quantity of distillate in case of steam distillation will be reduced by (A) Raising the temperature (B) Lowering the total pressure (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The amount of steam required per unit quantity of distillate in case of steam distillation will be reduced by (A) Raising the temperature (B) Lowering the total pressure (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B

With diminishing cross-sectional area in case of subsonic flow in a converging nozzle, the (A) Velocity increases (B) Pressure decreases (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : With diminishing cross-sectional area in case of subsonic flow in a converging nozzle, the (A) Velocity increases (B) Pressure decreases (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Mass velocity in case of steady flow and through a constant cross￾section conduit is independent of the (A) Temperature (B) Pressure (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Mass velocity in case of steady flow and through a constant cross￾section conduit is independent of the (A) Temperature (B) Pressure (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

. A Rotameter works on the principle of __________ pressure drop. (A) Constant(B) Variable(C) Both (A) & (B)(D) Neither (A) nor (B)

Description : . A Rotameter works on the principle of __________ pressure drop. (A) Constant (B) Variable (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (A) Constant

Isothermal turbulent flow of a fluid results in decrease of its pressure, which depends on the (A) Wall roughness (B) Reynolds number (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Isothermal turbulent flow of a fluid results in decrease of its pressure, which depends on the (A) Wall roughness (B) Reynolds number (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Velocity head on sudden enlargement in a horizontal pipe is converted into __________ head. (A) Elevation (B) Pressure (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Velocity head on sudden enlargement in a horizontal pipe is converted into __________ head. (A) Elevation (B) Pressure (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Pressure

If the catalyst pore size is small in comparison with the mean free path, collisions with the pore wall controls the process'. The diffusivity under this condition is called 'Knudsen diffusivity', which is affected by the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : If the catalyst pore size is small in comparison with the mean free path, collisions with the pore wall controls the process'. The diffusivity under this condition is called 'Knudsen diffusivity', which is affected by the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Temperature

Joule-Thomson co-efficient depends on the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Joule-Thomson co-efficient depends on the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Entropy of an ideal gas depends upon its (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Entropy of an ideal gas depends upon its (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The internal energy of an incompressible fluid depends upon its (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The internal energy of an incompressible fluid depends upon its (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Temperature

For multi-component multiple phases to be in equilibrium at the same pressure and temperature, the __________ of each component must be same in all phases. (A) Chemical potential (B) Fugacity (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : For multi-component multiple phases to be in equilibrium at the same pressure and temperature, the __________ of each component must be same in all phases. (A) Chemical potential (B) Fugacity (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

The heat capacities for the ideal gas state depend upon the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The heat capacities for the ideal gas state depend upon the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Temperature

Aniline point is the (A) Characteristic property of diesel & lubricating oils (B) Measure of aromatic content of oil (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Aniline point is the (A) Characteristic property of diesel & lubricating oils (B) Measure of aromatic content of oil (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B

Plutonium (A) Is recovered from spent fuel from thermal nuclear reactor (B) Has much lower melting point (640°C ) compared to thorium (1690°C) (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Plutonium (A) Is recovered from spent fuel from thermal nuclear reactor (B) Has much lower melting point (640°C ) compared to thorium (1690°C) (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B

Dry bulb temperature of unsaturated air is more than its __________ temperature. (A) Dew point (B) Wet bulb (C) Both 'a' & 'b' (D) Neither 'a' nor 'b

Description : Dry bulb temperature of unsaturated air is more than its __________ temperature. (A) Dew point (B) Wet bulb (C) Both 'a' & 'b' (D) Neither 'a' nor 'b

Last Answer : (C) Both 'a' & 'b

The ratio of Murphree plate efficiency to point efficiency is always > 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The ratio of Murphree plate efficiency to point efficiency is always > 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (A) Plug

The ratio of Murphree plate efficiency to point efficiency is 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The ratio of Murphree plate efficiency to point efficiency is 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Perfectly mixed