Which of the following performance characteristics of a S.I engine is not affected by the front end volatility of the petrol used? (A) Vapour locking (B) Hot starting (C) Spark plug fouling (D) All 'a', 'b' & 'c'

Which of the following performance characteristics of a S.I engine is not affected by the front end volatility of the petrol used? (A) Vapour locking
(B) Hot starting
(C) Spark plug fouling
(D) All 'a', 'b' & 'c'
by

1 Answer

Answer :

(C) Spark plug fouling
by

Related questions

When is spark plug fouling most likely to occur? a. In the climb if you have not adjusted the mixture b. Cruise power c. In the descent if you have not adjusted the mixture d. Max take-off power

Description : When is spark plug fouling most likely to occur? a. In the climb if you have not adjusted the mixture b. Cruise power c. In the descent if you have not adjusted the mixture d. Max take-off power

Last Answer : a. In the climb if you have not adjusted the mixture

When is spark plug fouling most likely to occur? a. In the climb if you have not adjusted the mixture b. Cruise power c. In the descent if you have not adjusted the mixture d. Max take-off power

Description : When is spark plug fouling most likely to occur? a. In the climb if you have not adjusted the mixture b. Cruise power c. In the descent if you have not adjusted the mixture d. Max take-off power

Last Answer : a. In the climb if you have not adjusted the mixture

A spark plug is used in a. petrol engine b. diesel engine c. gas engine d. steam engine

Description : A spark plug is used in a. petrol engine b. diesel engine c. gas engine d. steam engine

Last Answer : ANSWER a. petrol engine

Spark plug is provided in a/an (A) Engine having carburettor (B) Diesel engine (C) Compression ignition engine (D) Both (B) & (C)

Description : Spark plug is provided in a/an (A) Engine having carburettor (B) Diesel engine (C) Compression ignition engine (D) Both (B) & (C)

Last Answer : (A) Engine having carburettor

Boiling range of motor gasoline is an indication of the (A) Case of starting (B) Rate of acceleration (C) Vapour locking tendency (D) All (A), (B) and (C)

Description : Boiling range of motor gasoline is an indication of the (A) Case of starting (B) Rate of acceleration (C) Vapour locking tendency (D) All (A), (B) and (C)

Last Answer : (B) Rate of acceleration

Vapour lock is a. complete or partial stoppage of fuel supply due to vaporization of the fuel b. locking of carburetor due to high vapor pressure c. excess fuel supply to the engine d. supply of liquid fuel to the engine

Description : Vapour lock is a. complete or partial stoppage of fuel supply due to vaporization of the fuel b. locking of carburetor due to high vapor pressure c. excess fuel supply to the engine d. supply of liquid fuel to the engine

Last Answer : ANSWER a. complete or partial stoppage of fuel supply due to vaporization of the fuel

When a vehicle passes, TV reception gets distorted. This is because – (1) metal reflects radiowaves (2) spark plug creates electromagnetic disturbances (3) vehicle pollution affects the performance of the TV components (4) modern vehicles use electro ignition system

Description : When a vehicle passes, TV reception gets distorted. This is because – (1) metal reflects radiowaves (2) spark plug creates electromagnetic disturbances (3) vehicle pollution affects the performance of the TV components (4) modern vehicles use electro ignition system

Last Answer : (2) spark plug creates electromagnetic disturbances Explanation: This is caused due to the interference caused by the electromagnetic waves generated by a passing vehicle. These waves were within the same ... in which two waves superimpose to form a resultant wave of greater or lower amplitude.

When a vehicle passes, TV reception gets distorted. This is because – (1) metal reflects radiowaves (2) spark plug creates electromagnetic disturbances (3) vehicle pollution affects the performance of the TV components (4) modern vehicles use electro ignition system

Description : When a vehicle passes, TV reception gets distorted. This is because – (1) metal reflects radiowaves (2) spark plug creates electromagnetic disturbances (3) vehicle pollution affects the performance of the TV components (4) modern vehicles use electro ignition system

Last Answer : (2) spark plug creates electromagnetic disturbances Explanation: This is caused due to the interference caused by the electromagnetic waves generated by a passing vehicle. These waves were within the same ... in which two waves superimpose to form a resultant wave of greater or lower amplitude.

When a vehicle passes, TV reception gets distorted. This is because (1) metal reflects radiowaves (2) spark plug creates electromagnetic disturbances (3) vehicle pollution affects the performance of the TV components (4) modern vehicles use electroignition system

Description : When a vehicle passes, TV reception gets distorted. This is because (1) metal reflects radiowaves (2) spark plug creates electromagnetic disturbances (3) vehicle pollution affects the performance of the TV components (4) modern vehicles use electroignition system

Last Answer : spark plug creates electromagnetic disturbances

With increase in __________ Knocking tendency in a spark ignition petrol engine decreases. (A) Supercharging (B) Wall temperature (C) Compression ratio (D) Engine speed

Description : With increase in __________ Knocking tendency in a spark ignition petrol engine decreases. (A) Supercharging (B) Wall temperature (C) Compression ratio (D) Engine speed

Last Answer : Option D

Air-petrol ratio for maximum power generation in spark ignition engine is about (A) 6 : 1 (B) 12 : 1 (C) 18 : 1

Description : Air-petrol ratio for maximum power generation in spark ignition engine is about (A) 6 : 1 (B) 12 : 1 (C) 18 : 1

Last Answer : Option B

Why Joel's engine is unable to power his car the way it used to. The spark plug is working and the engine is compressing properly so what could be the problem?

Description : Why Joel's engine is unable to power his car the way it used to. The spark plug is working and the engine is compressing properly so what could be the problem?

Last Answer : Could be a fuel delivery problem such as a dirty fuelfilter.

Which of the following is not related to spark ignition engine? a. fuel injector b. spark plug c. flywheel d. distributor

Description : Which of the following is not related to spark ignition engine? a. fuel injector b. spark plug c. flywheel d. distributor

Last Answer : ANSWER a. fuel injector

ernal combustion engine that does not use spark plug is

Description : ernal combustion engine that does not use spark plug is

Last Answer : Diesel engine.

State the function of the following parts in a heat engine: a) Crank shaft b) spark plug c) carburettord) kick starter e) inlet valve f) outlet valve

Description : State the function of the following parts in a heat engine: a) Crank shaft b) spark plug c) carburettord) kick starter e) inlet valve f) outlet valve

Last Answer : a) Crankshaft converts the linear movement of piston into circular motion. b) Spark plug is used in petrol engine to ignite the mixture of petrol and air in the cylinder. c) Carburettorhelps to mix ... -air or air into the cylinder. f) Outlet Valve allows the exhaust gases out of the cylinder.

Show the following components in an engine with neat sketch: piston, connecting rod, valves, spark plug

Description : Show the following components in an engine with neat sketch: piston, connecting rod, valves, spark plug

Last Answer : OR

The tendency of a petrol engine to knock increases by a. supercharging b. scavenging c. increasing the engine horse power d. reducing the spark advance

Description : The tendency of a petrol engine to knock increases by a. supercharging b. scavenging c. increasing the engine horse power d. reducing the spark advance

Last Answer : ANSWER a. supercharging

Which of the following parameters of the fluid is not very important, while deciding its route in a shell and tube heat exchanger? (A) Corrosiveness & fouling characteristics (B) Pressure (C) Viscosity (D) Density

Description : Which of the following parameters of the fluid is not very important, while deciding its route in a shell and tube heat exchanger? (A) Corrosiveness & fouling characteristics (B) Pressure (C) Viscosity (D) Density

Last Answer : (D) Density

Reid vapour pressure of gasoline is the measure of its (A) Pour point (B) Cloud point (C) Vapour locking tendency (D) Carbon residue

Description : Reid vapour pressure of gasoline is the measure of its (A) Pour point (B) Cloud point (C) Vapour locking tendency (D) Carbon residue

Last Answer : (C) Vapour locking tendency

The vent valve provided in a liquid handling centrifugal pump is (A) Generally a needle valve (B) Used to release any gases that might be vapour locking the pump (C) Helpful in easy removal of samples (D) All (A), (B) and (C)

Description : The vent valve provided in a liquid handling centrifugal pump is (A) Generally a needle valve (B) Used to release any gases that might be vapour locking the pump (C) Helpful in easy removal of samples (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Relative volatility does not change appreciably with the change in (A) Temperature (B) Vapour pressure of either component (C) Total pressure (D) None of these

Description : Relative volatility does not change appreciably with the change in (A) Temperature (B) Vapour pressure of either component (C) Total pressure (D) None of these

Last Answer : (A) Temperature

When the liquid phase and vapour phase of a binary system obeys Raoult's and Dalton's law respectively, the relative volatility is the ratio of (A) Vapour pressure of component A to that of component B (B) Vapour pressure of component A to the total pressure (C) Vapour pressure of component A to the partial pressure of A (D) Partial pressure of component A to the total pressure

Description : When the liquid phase and vapour phase of a binary system obeys Raoult's and Dalton's law respectively, the relative volatility is the ratio of (A) Vapour pressure of component A to that of ... to the partial pressure of A (D) Partial pressure of component A to the total pressure

Last Answer : (A) Vapour pressure of component A to that of component B

The part of a petrol engine in which petrol vapour and air are mixed is

Description : The part of a petrol engine in which petrol vapour and air are mixed is

Last Answer : carburetor.

Out of the following refrigeration cycles, which one has the minimum COP (Co-efficient of performance)? (A) Air cycle (B) Carnot cycle (C) Ordinary vapour compression cycle (D) Vapour compression with a reversible expansion engine

Description : Out of the following refrigeration cycles, which one has the minimum COP (Co-efficient of performance)? (A) Air cycle (B) Carnot cycle (C) Ordinary vapour compression cycle (D) Vapour compression with a reversible expansion engine

Last Answer : A) Air cycle

If you are beset by hordes of chiggers, and are itching like mad, would grabbing a live spark plug wire on a lawn mower kill the suckers?

Description : If you are beset by hordes of chiggers, and are itching like mad, would grabbing a live spark plug wire on a lawn mower kill the suckers?

Last Answer : WTF is a chigger?

Does a hotter spark on a spark plug mean that you will get better gas mileage?

Description : Does a hotter spark on a spark plug mean that you will get better gas mileage?

Last Answer : Need Answer

if you make the gap on the spark plug closer? Will that improve gas mileage?

Description : if you make the gap on the spark plug closer? Will that improve gas mileage?

Last Answer : Need Answer

how to change spark plug wires 2002 gmc saffari

Description : how to change spark plug wires 2002 gmc saffari

Last Answer : Need Answer

Is the cap on the spark plug on the 4and 6 cylinder the same?

Description : Is the cap on the spark plug on the 4and 6 cylinder the same?

Last Answer : do they use the same plugs

What is the Spark plug number for a 2005 Ford Escape?

Description : What is the Spark plug number for a 2005 Ford Escape?

Last Answer : Feel Free to Answer

What is the Spark plug gap for a 2004 ford freestar?

Description : What is the Spark plug gap for a 2004 ford freestar?

Last Answer : Look on the sticker under the hood. The emissions sticker.

What is the spark plug setting for 1949 8n tractor?

Description : What is the spark plug setting for 1949 8n tractor?

Last Answer : what is the spark plug setting for 1949 8n tractor

Spark Plug Replacement?

Description : Spark Plug Replacement?

Last Answer : form_title=Spark Plug Replacement form_header=Keep your engine running smoothly with new spark plugs! If you need your spark plugs replaced, we can help you find an auto technician to get the job done. What ... ?=_ When was the last time you had your spark plugs replaced?=_ Describe the problem=_

What is the spark plug gap for a 1990Chevy 2500 with a 305?

Description : What is the spark plug gap for a 1990Chevy 2500 with a 305?

Last Answer : Spark plug gap is where spark plug spark discharge is designed to take place. On a conventional spark plug, it is the area between the center and the ground electrode.

The sparking voltage of the spark plug is A. 6 to 12 V B. 100 to 450 V C. 1 to 2 kV D. 20 to 30kV

Description : The sparking voltage of the spark plug is A. 6 to 12 V B. 100 to 450 V C. 1 to 2 kV D. 20 to 30kV

Last Answer : ANSWER : D

The potential difference across the gap of a spark plug ranges between a) 10-20 mV b) 10-20 V c) 10-20 kV d) 10-20 MV

Description : The potential difference across the gap of a spark plug ranges between a) 10-20 mV b) 10-20 V c) 10-20 kV d) 10-20 MV

Last Answer : ans a

How to Gap a Spark Plug

Description : How to Gap a Spark Plug

Last Answer : How to Gap a Spark Plug For car customizers and auto enthusiasts, engine performance is a priority. One way to accomplish this is to set new gaps on your car engine's spark plugs. Here are ... With these steps, you can safely gap the spark plugs on your car to improve efficiency and performance.

State the functions following ignition system components (i) Ignition coil (ii) Distributor (iii)Condenser (iv)Spark plug

Description : State the functions following ignition system components (i) Ignition coil (ii) Distributor (iii)Condenser (iv)Spark plug

Last Answer : Functions following ignition system components: (i) Ignition coil: Ignition coil receives voltage from primary circuit and convert it to very high voltage up to 28000 volts required for spark by means of ... Charge of air and petrol is ignited by means of the spark produced by spark plug.

The air requirement of a petrol engine during starting compared to the theoretical air requirement for complete combustion is A. more B.unpredictable C. same D. less

Description : The air requirement of a petrol engine during starting compared to the theoretical air requirement for complete combustion is A. more B.unpredictable C. same D. less

Last Answer : ANSWER : D

The air requirement of a petrol engine during starting compared to theoretical air required for complete combustion is a. more b. less c. same d. may be more or less depending on engine capacity

Description : The air requirement of a petrol engine during starting compared to theoretical air required for complete combustion is a. more b. less c. same d. may be more or less depending on engine capacity

Last Answer : ANSWER b. less

Flash point of a liquid petroleum fuel gives an idea about its (A) Volatility (B) Explosion hazards characteristics (C) Nature of boiling point diagram (D) All (A), (B) and (C)

Description : Flash point of a liquid petroleum fuel gives an idea about its (A) Volatility (B) Explosion hazards characteristics (C) Nature of boiling point diagram (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Baffles provided on the shell side of a shell and tube heat exchanger are meant for (A) Providing support for the tubes (B) Improving heat transfer (C) Both 'a' & 'b' (D) Preventing the fouling of tubes & stagnation of shell side fluid

Description : Baffles provided on the shell side of a shell and tube heat exchanger are meant for (A) Providing support for the tubes (B) Improving heat transfer (C) Both 'a' & 'b' (D) Preventing the fouling of tubes & stagnation of shell side fluid

Last Answer : C) Both 'a' & 'b'

In a morse test for a 2 cylinder, 2 S SI engine, the brake power was 9 kW. Whereas the brake power of individual cylinders with spark cut off were 4.25 kW and 3.75 kW. The mecheffic of the engine is (a) 90% (b) 80% (c) 45.5% (d) 52.5%

Description : In a morse test for a 2 cylinder, 2 S SI engine, the brake power was 9 kW. Whereas the brake power of individual cylinders with spark cut off were 4.25 kW and 3.75 kW. The mecheffic of the engine is (a) 90% (b) 80% (c) 45.5% (d) 52.5%

Last Answer : Ans :a

Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger, the shell pressure drop is maximum for orifice baffles (C) S.I. unit of fouling factor is Watt/m2 .°K (D) Longitudinal fins are used in extended surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Description : Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger ... surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Last Answer : (C) S.I. unit of fouling factor is Watt/m2 .°K

Stabilisation of gasoline (petrol) means (A) Removal of dissolved gases from it (B) Increasing its oxidation stability (C) Improving its lead susceptibility (D) Increasing its vapour pressure

Description : Stabilisation of gasoline (petrol) means (A) Removal of dissolved gases from it (B) Increasing its oxidation stability (C) Improving its lead susceptibility (D) Increasing its vapour pressure

Last Answer : (A) Removal of dissolved gases from it

Which of the following is a device used on a tractor or stationary engine for maintaining nearly constant engine speed under varying loads? 1. Volatility of fuel 2. Governor 3. Pre-ignition 4. carburetor

Description : Which of the following is a device used on a tractor or stationary engine for maintaining nearly constant engine speed under varying loads? 1. Volatility of fuel 2. Governor 3. Pre-ignition 4. carburetor

Last Answer : <!-- [if !supportLists] -->1.   <!-- [endif] -->ans 2  

Pick out the wrong statement (A) Low ozone layer thickness in polar regions is due to cold climatic conditions (B) Amount of unburnt hydrocarbons emitted by two stroke petrol engine is more as compared to that emitted by a four stroke engine (C) Carbon monoxide present in the two stroke petrol engine exhaust is much less as compared to that emitted from a four stroke engine (D) Mercury as a pollutant can enter the blood stream & the digestive system/ lungs and is responsible for causing Minamata disease

Description : Pick out the wrong statement (A) Low ozone layer thickness in polar regions is due to cold climatic conditions (B) Amount of unburnt hydrocarbons emitted by two stroke petrol engine is more ... can enter the blood stream & the digestive system/ lungs and is responsible for causing Minamata disease

Last Answer : (D) Mercury as a pollutant can enter the blood stream & the digestive system/ lungs and is responsible for causing Minamata disease

In a battery ignition system, the intensity of spark is A. minimum at low engine speed B. minimum at low engine speed and increases with engine speed C. maximum al low engine speed and decreases with engine speed D. maximum at low engine speed

Description : In a battery ignition system, the intensity of spark is A. minimum at low engine speed B. minimum at low engine speed and increases with engine speed C. maximum al low engine speed and decreases with engine speed D. maximum at low engine speed

Last Answer : ANSWER : C

The compression ratio in a Spark Ignition (SI) engine is generally in between a. 7 to 10 b. 10 to 14 c. 14 to 18 d. 18 to 22 (Ans:a)

Description : The compression ratio in a Spark Ignition (SI) engine is generally in between a. 7 to 10 b. 10 to 14 c. 14 to 18 d. 18 to 22 (Ans:a)

Last Answer : Which of the following is not true for two stroke engine as compared to four stroke engine? a. Less cooling is required b. Greater lubrication is required c. More uniform torque on crankshaft d. Complete exhaust of products of combustion (Ans:a)

The knocking in spark ignition engines can be reduced by a. Retarding the spark. b. Increasing the engine speed. c. Both a and b d. None of these.

Description : The knocking in spark ignition engines can be reduced by a. Retarding the spark. b. Increasing the engine speed. c. Both a and b d. None of these.

Last Answer : ANSWER c. Both a and b.