Bottom product of atmospheric pressure crude oil distillation column is termed as (A) Reduced crude (B) Heavy ends (C) Asphalt (D) Residuum

Bottom product of atmospheric pressure crude oil distillation column is
termed as
(A) Reduced crude
(B) Heavy ends
(C) Asphalt
(D) Residuum
by

1 Answer

Answer :

(A) Reduced crude
by

Related questions

The terminology used for the bottom most product from the vacuum crude distillation unit is (A) Residual crude (B) Residuum (C) Reduced crude (D) Petrolatum

Description : The terminology used for the bottom most product from the vacuum crude distillation unit is (A) Residual crude (B) Residuum (C) Reduced crude (D) Petrolatum

Last Answer : (B) Residuum

Products drawn from the top to bottom of the crude oil distillation column has progressively increasing (A) Boiling points (B) Molecular weight (C) C/H ratio (D) All (A), (B) and (C)

Description : Products drawn from the top to bottom of the crude oil distillation column has progressively increasing (A) Boiling points (B) Molecular weight (C) C/H ratio (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low boiling products are prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Description : Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low ... prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Last Answer : (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose

The most commonly used feed stock for the reforming reactor is (A) Heavy fuel oil (B) Residuum (C) Straight run gasoline (D) Casing head gasoline

Description : The most commonly used feed stock for the reforming reactor is (A) Heavy fuel oil (B) Residuum (C) Straight run gasoline (D) Casing head gasoline

Last Answer : (C) Straight run gasoline

In the atmospheric pressure crude distillation, the content of __________ from lighter fraction to heavier ones. (A) Sulphur increases (B) Sulphur decreases (C) Nitrogen decreases (D) None of these

Description : In the atmospheric pressure crude distillation, the content of __________ from lighter fraction to heavier ones. (A) Sulphur increases (B) Sulphur decreases (C) Nitrogen decreases (D) None of these

Last Answer : (A) Sulphur increases

In a refinery petroleum crude is fractionated into gas fraction, light ends, intermediate distillates, heavy distillates, residues and by products. The group of products including gas oil, diesel oil and heavy fuel oil belongs to the fraction (A) Heavy distillates (B) Intermediate distillates (C) Light ends (D) Residues

Description : In a refinery petroleum crude is fractionated into gas fraction, light ends, intermediate distillates, heavy distillates, residues and by products. The group of products including gas oil, diesel oil and ... the fraction (A) Heavy distillates (B) Intermediate distillates (C) Light ends (D) Residues

Last Answer : (A) Heavy distillates

Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil

Description : Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil

Last Answer : (A) Higher yield of straight run gasoline

Crude topping column operates at __________ pressure. (A) Atmospheric (B) 10 atm

Description : Crude topping column operates at __________ pressure. (A) Atmospheric (B) 10 atm

Last Answer : (A) Atmospheric

Catalytic cracking compared to thermal cracking of residue of vacuum distillation of crude oil (A) Gives higher yield of petrol (B) Lower octane number of petrol (C) Higher sulphur content in the product (D) Higher gum forming material in petro

Description : Catalytic cracking compared to thermal cracking of residue of vacuum distillation of crude oil (A) Gives higher yield of petrol (B) Lower octane number of petrol (C) Higher sulphur content in the product (D) Higher gum forming material in petro

Last Answer : (A) Gives higher yield of petrol

Pressure maintained in the high pressure primary tower of a three stage crude oil distillation system is about __________ kg/cm2 . (A) 1.5 (B) 3 (C) 6 (D) 12

Description : Pressure maintained in the high pressure primary tower of a three stage crude oil distillation system is about __________ kg/cm2 . (A) 1.5 (B) 3 (C) 6 (D) 12

Last Answer : (B) 3

The vacuum maintained in vacuum distillation unit for reduced crude is about __________ mm Hg. (A) 1.2 (B) 12 (C) 120 (D) 700

Description : The vacuum maintained in vacuum distillation unit for reduced crude is about __________ mm Hg. (A) 1.2 (B) 12 (C) 120 (D) 700

Last Answer : (C) 120

A distillation column with N plates is being operated under normal conditions. At some point of time, the operation is shifted to total reflux condition (i.e., no product and residue are being withdrawn and feed to the column is stopped). At the new steady state, (A) Composition of vapors and that of liquid do not vary throughout the column (B) Reboiler load and condenser load are minimum (C) The top and bottom compositions are unchanged with and without total reflux (D) The top and bottom compositions correspond to the maximum enrichment available

Description : A distillation column with N plates is being operated under normal conditions. At some point of time, the operation is shifted to total reflux condition (i.e., no product and residue are ... and without total reflux (D) The top and bottom compositions correspond to the maximum enrichment available

Last Answer : (D) The top and bottom compositions correspond to the maximum enrichment available

Inside the distillation column, the (A) Driving force for the vapour flow is the pressure drop (B) Liquids are not always at their bubble points (C) Pressure increases gradually from bottom to the top of the column (D) None of these

Description : Inside the distillation column, the (A) Driving force for the vapour flow is the pressure drop (B) Liquids are not always at their bubble points (C) Pressure increases gradually from bottom to the top of the column (D) None of these

Last Answer : (A) Driving force for the vapour flow is the pressure drop

In an operating distillation column, the (A) Vapors and liquids are at their dew point and bubble point respectively (B) Driving force for the liquid flow is its specific weight (C) Driving force for the vapor flow is the pressure drop, as the pressure decreases gradually from the bottom to the top of the column (D) Highest temperature is encountered at the top of the column

Description : In an operating distillation column, the (A) Vapors and liquids are at their dew point and bubble point respectively (B) Driving force for the liquid flow is its specific weight (C) Driving force for ... bottom to the top of the column (D) Highest temperature is encountered at the top of the column

Last Answer : (C) Driving force for the vapor flow is the pressure drop, as the pressure decreases gradually from the bottom to the top of the column

Both asphalt and wax are produced by __________ base crude oils. (A) Naphthenic (B) Asphalt (C) Paraffin (D) Mixed

Description : Both asphalt and wax are produced by __________ base crude oils. (A) Naphthenic (B) Asphalt (C) Paraffin (D) Mixed

Last Answer : (C) Paraffin

Sour crude means the __________ bearing crude. (A) Asphalt (B) Sulphur compounds (C) Wax (D) Nitrogen compounds

Description : Sour crude means the __________ bearing crude. (A) Asphalt (B) Sulphur compounds (C) Wax (D) Nitrogen compounds

Last Answer : (B) Sulphur compounds

Naphtha yield in straight run distillation of crude oil may be about__________ percent.(A) 2(B) 6(C) 12(D) 18

Description : Naphtha yield in straight run distillation of crude oil may be about__________ percent. (A) 2 (B) 6 (C) 12 (D) 18

Last Answer : (B) 6

A typical yield of kerosene in straight run distillation of crude oil may be about __________ percent. (A) 4 (B) 10 (C) 18 (D) 26

Description : A typical yield of kerosene in straight run distillation of crude oil may be about __________ percent. (A) 4 (B) 10 (C) 18 (D) 26

Last Answer : (B) 10

A typical yield of diesel in straight run distillation of crude oil may be about __________ percent. (A) 8 (B) 18 (C) 28 (D) 35

Description : A typical yield of diesel in straight run distillation of crude oil may be about __________ percent. (A) 8 (B) 18 (C) 28 (D) 35

Last Answer : (A) 8

Light oil whose major component is Benzol, is obtained by the distillation of crude tar in the temperature range of __________ °C. (A) 80-170 (B) 200-300 (C) 250-270

Description : Light oil whose major component is Benzol, is obtained by the distillation of crude tar in the temperature range of __________ °C. (A) 80-170 (B) 200-300 (C) 250-270

Last Answer : (A) 80-170

Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point (C) Each ton of petroleum oil on distillation produces about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Description : Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches ... about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Last Answer : (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point

Consider the following statements: 1. Carbyne is an allotrope of carbon. 2. Gasoline, used as a fuel in motor vehicles is a mixture of petrol and alcohol. 3. Petroleum is also known as 'liquid gold'. 4. The various components of crude oil are separated by fractional distillation. The correct statements are: (a) 1, 2 and 4 only (b) 1, 3 and 4 only (c) 1, 2, 3 and 4 (d) 1, 2 and 3 only

Description : Consider the following statements: 1. Carbyne is an allotrope of carbon. 2. Gasoline, used as a fuel in motor vehicles is a mixture of petrol and alcohol. 3. Petroleum is also known as 'liquid gold'. 4. The various components of crude ... (b) 1, 3 and 4 only (c) 1, 2, 3 and 4 (d) 1, 2 and 3 only

Last Answer : Ans:(b)

Consider the following processes: 1. Evaporation 2. Fractional distillation 3. Distillation 4. Filtration The process(es) involved in the refining of crude oil is/ are: (a) 3 only (b) 2 and 3 (c) 3 only (d) 1 only

Description : Consider the following processes: 1. Evaporation 2. Fractional distillation 3. Distillation 4. Filtration The process(es) involved in the refining of crude oil is/ are: (a) 3 only (b) 2 and 3 (c) 3 only (d) 1 only

Last Answer : Ans:(b)

Crude oil is separated into its components by: w) chemical reaction x) simple distillation y) fractional distillation z) settling

Description : Crude oil is separated into its components by: w) chemical reaction x) simple distillation y) fractional distillation z) settling

Last Answer : ANSWER: Y -- FRACTIONAL DISTILLATION 

Which of the following fractions of a crude oil will have the maximum gravity API (i.e. °API)? (A) Diesel (B) Gasoline (C) Atmospheric gas oil (D) Vacuum gas oil

Description : Which of the following fractions of a crude oil will have the maximum gravity API (i.e. °API)? (A) Diesel (B) Gasoline (C) Atmospheric gas oil (D) Vacuum gas oil

Last Answer : (C) Atmospheric gas oil

Plate efficiency in a distillation column is reduced due to the __________ of liquid. (A) Entrainment (B) Foaming (C) Weeping & dumping (D) All (A), (B) & (C)

Description : Plate efficiency in a distillation column is reduced due to the __________ of liquid. (A) Entrainment (B) Foaming (C) Weeping & dumping (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Pick out the wrong statement. (A) With decrease in feed temperature, the number of plates required for binary distillation decreases for a given ‘L/V’ ratio (B) The extraction per unit of total height for a short packed column is more effective than for a tall column, in case of liquid-liquid extraction(C) Natural draft cooling towers are made of ferroconcrete and its cross￾section is wider at the bottom(D) Vander wall adsorption is also called chemisorption

Description : Pick out the wrong statement. (A) With decrease in feed temperature, the number of plates required for binary distillation decreases for a given L/V' ratio (B) The extraction per unit ... and its cross￾section is wider at the bottom (D) Vander wall adsorption is also called chemisorption

Last Answer : (D) Vander wall adsorption is also called chemisorption

According to the Fenske equation, what will be the minimum number of plates required in a distillation column to separate an equimolar binary mixture of components A and B into an overhead fraction containing 99 mol% A and a bottom fraction containing 98 mol% B ? Assume that relative volatility (αAB = 2) does not change appreciably in the column. (A) 5 (B) 9 (C) 12 (D) 28

Description : According to the Fenske equation, what will be the minimum number of plates required in a distillation column to separate an equimolar binary mixture of components A and B into an overhead fraction containing 99 mol% A and a ... in the column. (A) 5 (B) 9 (C) 12 (D) 28

Last Answer : (C) 12

Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if distilled directly at atmospheric pressure (C) Material cannot be distilled by indirect heating even under low pressure, because of the high boiling temperature (D) Material to be distilled is thermally unstable or has the tendency to react with other components associated with it, at the boiling temperature

Description : Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if ... unstable or has the tendency to react with other components associated with it, at the boiling temperature

Last Answer : (A) Azeotropic mixture is to be separated and the final product is miscible with water

Feed for reforming is generally (A) Naphtha or straight run gasoline (B) Reduced crude (C) Vacuum gas oil

Description : Feed for reforming is generally (A) Naphtha or straight run gasoline (B) Reduced crude (C) Vacuum gas oil

Last Answer : (A) Naphtha or straight run gasoline

Crude oil is sometimes termed sweet because it is – (1) sweet in taste due to dissolved sugars (2) mildly sweet due to low sulphur content (3) less acidic (4) less alkaline

Description : Crude oil is sometimes termed sweet because it is – (1) sweet in taste due to dissolved sugars (2) mildly sweet due to low sulphur content (3) less acidic (4) less alkaline

Last Answer : (2) mildly sweet due to low sulphur content Explanation: Crude oil is sometimes termed sweet amount of hydrogen sulphide and Carbon dioxide.

Crude oil is sometimes termed sweet because it is : (1) sweet in taste due to dissolved sugars (2) mildly sweet due to low sulphur content (3) less acidic (4) less alkaline

Description : Crude oil is sometimes termed sweet because it is : (1) sweet in taste due to dissolved sugars (2) mildly sweet due to low sulphur content (3) less acidic (4) less alkaline

Last Answer : mildly sweet due to low sulphur content

Asphalt is obtained from (A) Petroleum distillation (B) Bitumen distillation (C) Plastic distillation (D) None of these

Description : Asphalt is obtained from (A) Petroleum distillation (B) Bitumen distillation (C) Plastic distillation (D) None of these

Last Answer : Answer: Option A

Vacuum maintained in the vacuum distillation column in oil refinery is in the range of about __________ mm Hg absolute. (A) 1 to 5 (B) 30 to 80

Description : Vacuum maintained in the vacuum distillation column in oil refinery is in the range of about __________ mm Hg absolute. (A) 1 to 5 (B) 30 to 80

Last Answer : (B) 30 to 80

The main use of heavy gas oil produced by the vacuum distillation unit is as a (A) Blending component for kerosene (B) Blending component for petrol (C) Feedstock for fluid catalytic cracking unit (D) None of these

Description : The main use of heavy gas oil produced by the vacuum distillation unit is as a (A) Blending component for kerosene (B) Blending component for petrol (C) Feedstock for fluid catalytic cracking unit (D) None of these

Last Answer : (C) Feedstock for fluid catalytic cracking unit

__________ chloride present in crude petroleum as impurity is the most prolific producer of HCl during distillation. (A) Magnesium (B) Potassium (C) Calcium (D) Sodium

Description : __________ chloride present in crude petroleum as impurity is the most prolific producer of HCl during distillation. (A) Magnesium (B) Potassium (C) Calcium (D) Sodium

Last Answer : (A) Magnesium

Vacuum maintained in the vacuum distillation tower of the crude distillation plant is about __________ mm Hg (absolute). (A) 5-10 (B) 30-80 (C) 150-250 (D) 350-400

Description : Vacuum maintained in the vacuum distillation tower of the crude distillation plant is about __________ mm Hg (absolute). (A) 5-10 (B) 30-80 (C) 150-250 (D) 350-400

Last Answer : (B) 30-80

Flash distillation is (A) Same as differential distillation (B) Used for multi-component systems like crude refining (C) Same as simple distillation (D) Most useful for handling binary systems

Description : Flash distillation is (A) Same as differential distillation (B) Used for multi-component systems like crude refining (C) Same as simple distillation (D) Most useful for handling binary systems

Last Answer : (B) Used for multi-component systems like crude refining

If the atmospheric pressure on the surface of an oil tank (sp. gr. 0.8) is 0.2 kg/cm", the pressure at a depth of 50 m below the oil surface will be (A) 2 meters of water column (B) 3 meters of water column (C) 5 meters of water column (D) 6 meters of water Column

Description : If the atmospheric pressure on the surface of an oil tank (sp. gr. 0.8) is 0.2 kg/cm", the pressure at a depth of 50 m below the oil surface will be (A) 2 meters of water column (B) 3 meters of water column (C) 5 meters of water column (D) 6 meters of water Column

Last Answer : Answer: Option D

Pitch (a product of coal tar distillation) is always mixed with creosote oil, when it is to be burnt in a burner, because (A) Its calorific value is very less (B) Tar neutralises the residual acids present in pitch (C) It reduces viscosity and imparts fluidity for its transportation through pipelines at economic pressure drop (D) All (A), (B) and (C)

Description : Pitch (a product of coal tar distillation) is always mixed with creosote oil, when it is to be burnt in a burner, because (A) Its calorific value is very less (B) Tar neutralises the residual acids ... for its transportation through pipelines at economic pressure drop (D) All (A), (B) and (C)

Last Answer : (C) It reduces viscosity and imparts fluidity for its transportation through pipelines at economic pressure drop

Water-ethyl alcohol solution can be concentrated (in respect of alcohol concentration) by __________ distillation. (A) Atmospheric (B) Vacuum (C) High pressure (D) None of these

Description : Water-ethyl alcohol solution can be concentrated (in respect of alcohol concentration) by __________ distillation. (A) Atmospheric (B) Vacuum (C) High pressure (D) None of these

Last Answer : (B) Vacuum

The reflux to a distillation column is 100 moles/hr, when the overhead product rate is 50 moles/hr. The reflux ratio is (A) 2 (B) 0.5 (C) 50 (D) 150

Description : The reflux to a distillation column is 100 moles/hr, when the overhead product rate is 50 moles/hr. The reflux ratio is (A) 2 (B) 0.5 (C) 50 (D) 150

Last Answer : (A) 2

Furnace oil consumption in a furnace for a given duty employing preheated combination air (at 300°) may be reduced by about __________ percent as compared to the use of atmospheric combustion air. (A) 5 (B) 10 (C) 20 (D) 35

Description : Furnace oil consumption in a furnace for a given duty employing preheated combination air (at 300°) may be reduced by about __________ percent as compared to the use of atmospheric combustion air. (A) 5 (B) 10 (C) 20 (D) 35

Last Answer : (C) 20

Which of the following fractions of coal-tar distillation contains naphthalene? (a) Light oil (b) Middle oil (c) Heavy oil (d) Anthracene oil

Description : Which of the following fractions of coal-tar distillation contains naphthalene? (a) Light oil (b) Middle oil (c) Heavy oil (d) Anthracene oil

Last Answer : Middle oil

Which of the following fractions of coal-tar distillation contains benzene? (a) Light oil (b) Middle oil (c) Heavy oil (d) Anthracene oil

Description : Which of the following fractions of coal-tar distillation contains benzene? (a) Light oil (b) Middle oil (c) Heavy oil (d) Anthracene oil

Last Answer : Light oil

The amount of steam required per unit quantity of distillate in case of steam distillation will be reduced by (A) Raising the temperature (B) Lowering the total pressure (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The amount of steam required per unit quantity of distillate in case of steam distillation will be reduced by (A) Raising the temperature (B) Lowering the total pressure (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B

If a1 and a2 are the relative volatilities when the pressure in the distillation column is 1 and 2 atm respectively. Pick out the correct statement. (A) a1 = a2 (B) a1 = 2a2 (C) a1 = 0.5 a2 (D) None of these

Description : If a1 and a2 are the relative volatilities when the pressure in the distillation column is 1 and 2 atm respectively. Pick out the correct statement. (A) a1 = a2 (B) a1 = 2a2 (C) a1 = 0.5 a2 (D) None of these

Last Answer : (D) None of these

Pick out the wrong statement. (A) Critical moisture content is not a property of the material itself (B) A sharp increase in pressure drop gives an indication of the flooding in a distillation column (C) Separation of components is not possible in liquid extraction, if selectivity is unity (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Description : Pick out the wrong statement. (A) Critical moisture content is not a property of the material itself (B) A sharp increase in pressure drop gives an indication of the flooding in a ... unity (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Last Answer : (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Priming in a distillation column (A) Results from very low gas velocity (B) Is desirable from point efficiency consideration (C) Is characterised by the presence of foam throughout the space between trays (D) Reduces the overall pressure drop

Description : Priming in a distillation column (A) Results from very low gas velocity (B) Is desirable from point efficiency consideration (C) Is characterised by the presence of foam throughout the space between trays (D) Reduces the overall pressure drop

Last Answer : (C) Is characterised by the presence of foam throughout the space between trays

. For the same feed, feed quality and separation (in a distillation column), with the increase of total pressure, the number of ideal plates will (A) Increase (B) Decrease (C) Remain same (D) Data insufficient, can't be predicted

Description : . For the same feed, feed quality and separation (in a distillation column), with the increase of total pressure, the number of ideal plates will (A) Increase (B) Decrease (C) Remain same (D) Data insufficient, can't be predicted

Last Answer : (A) Increase