A distillation column with N plates is being operated under normal conditions. At some point of time, the operation is shifted to total reflux condition (i.e., no product and residue are being withdrawn and feed to the column is stopped). At the new steady state, (A) Composition of vapors and that of liquid do not vary throughout the column (B) Reboiler load and condenser load are minimum (C) The top and bottom compositions are unchanged with and without total reflux (D) The top and bottom compositions correspond to the maximum enrichment available

A distillation column with N plates is being operated under normal
conditions. At some point of time, the operation is shifted to total reflux
condition (i.e., no product and residue are being withdrawn and feed to the
column is stopped). At the new steady state,
(A) Composition of vapors and that of liquid do not vary throughout the
column
(B) Reboiler load and condenser load are minimum
(C) The top and bottom compositions are unchanged with and without total
reflux
(D) The top and bottom compositions correspond to the maximum
enrichment available
by

1 Answer

Answer :

(D) The top and bottom compositions correspond to the maximum
enrichment available
by

Related questions

Total reflux in a distillation operation requires minimum (A) Reboiler load (B) Number of plates (C) Condenser load (D) All (A), (B) and (C)

Description : Total reflux in a distillation operation requires minimum (A) Reboiler load (B) Number of plates (C) Condenser load (D) All (A), (B) and (C)

Last Answer : (B) Number of plates

Pick out the wrong statement: (A) Reboiler is not used in open steam distillation (B) The separation of solutes of different molecular sizes in a liquid solution by use of a suitable membrane is called dialysis (C) Freeze drying is used for the drying of fish (D) Fenske-Underwood equation is used for calculating theoretical number of plates in a distillation column at normal operating reflux condition

Description : Pick out the wrong statement: (A) Reboiler is not used in open steam distillation (B) The separation of solutes of different molecular sizes in a liquid solution by use of a ... is used for calculating theoretical number of plates in a distillation column at normal operating reflux condition

Last Answer : (D) Fenske-Underwood equation is used for calculating theoretical number of plates in a distillation column at normal operating reflux condition

Minimum reflux ratio in a distillation column results in (A) Optimum number of trays (B) Minimum reboiler size (C) Maximum condenser size (D) Minimum number of trays

Description : Minimum reflux ratio in a distillation column results in (A) Optimum number of trays (B) Minimum reboiler size (C) Maximum condenser size (D) Minimum number of trays

Last Answer : (C) Maximum condenser size

Pick out the wrong statement. (A) Different solids have different equilibrium moisture curves (B) Total condenser or reboiler is considered equivalent to one theoretical plate in McCabe-Thiele method of theoretical plate calculation for distillation column (C) Heat removal load on cooler remains constant, even with increase of the reflux ratio in a distillation column (D) Even a forced draft cooling tower cannot cool water below the wet bulb temperature

Description : Pick out the wrong statement. (A) Different solids have different equilibrium moisture curves (B) Total condenser or reboiler is considered equivalent to one theoretical plate in McCabe-Thiele method of ... (D) Even a forced draft cooling tower cannot cool water below the wet bulb temperature

Last Answer : (C) Heat removal load on cooler remains constant, even with increase of the reflux ratio in a distillation column

In an operating distillation column, the (A) Vapors and liquids are at their dew point and bubble point respectively (B) Driving force for the liquid flow is its specific weight (C) Driving force for the vapor flow is the pressure drop, as the pressure decreases gradually from the bottom to the top of the column (D) Highest temperature is encountered at the top of the column

Description : In an operating distillation column, the (A) Vapors and liquids are at their dew point and bubble point respectively (B) Driving force for the liquid flow is its specific weight (C) Driving force for ... bottom to the top of the column (D) Highest temperature is encountered at the top of the column

Last Answer : (C) Driving force for the vapor flow is the pressure drop, as the pressure decreases gradually from the bottom to the top of the column

Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is important in problems involving gas absorption without chemical reaction (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion (D) Total reflux in case of distillation operation requires infinite number of plates for a binary system separation

Description : Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is ... reflux in case of distillation operation requires infinite number of plates for a binary system separation

Last Answer : (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion

As the reflux ratio in a distillation column is increased from the minimum, the (A) Slope of the operating line in stripping section decreases (B) Number of plates decreases very slowly first and then more and more rapidly (C) Total cost first decreases and then increases (D) Liquid flow increases while the vapor flow decreases for a system

Description : As the reflux ratio in a distillation column is increased from the minimum, the (A) Slope of the operating line in stripping section decreases (B) Number of plates decreases very slowly first ... decreases and then increases (D) Liquid flow increases while the vapor flow decreases for a system

Last Answer : (C) Total cost first decreases and then increases

For a distillation column operating at minimum reflux, the (A) Concentration of liquid and vapour leaving a plate will be same (B) Reflux ratio will be maximum (C) Number of plates required will be maximum

Description : For a distillation column operating at minimum reflux, the (A) Concentration of liquid and vapour leaving a plate will be same (B) Reflux ratio will be maximum (C) Number of plates required will be maximum

Last Answer : (C) Number of plates required will be maximum

Pick out the wrong statement. (A) With decrease in feed temperature, the number of plates required for binary distillation decreases for a given ‘L/V’ ratio (B) The extraction per unit of total height for a short packed column is more effective than for a tall column, in case of liquid-liquid extraction(C) Natural draft cooling towers are made of ferroconcrete and its cross￾section is wider at the bottom(D) Vander wall adsorption is also called chemisorption

Description : Pick out the wrong statement. (A) With decrease in feed temperature, the number of plates required for binary distillation decreases for a given L/V' ratio (B) The extraction per unit ... and its cross￾section is wider at the bottom (D) Vander wall adsorption is also called chemisorption

Last Answer : (D) Vander wall adsorption is also called chemisorption

In case of binary distillation, increasing the reflux ratio above optimum does not result in the increase of (A) Area between operating line and 45° diagonal x-y diagram (B) Condenser and reboiler surfaces (C) Tower cross-section (D) None of these

Description : In case of binary distillation, increasing the reflux ratio above optimum does not result in the increase of (A) Area between operating line and 45° diagonal x-y diagram (B) Condenser and reboiler surfaces (C) Tower cross-section (D) None of these

Last Answer : (A) Area between operating line and 45° diagonal x-y diagram

The minimum number of theoretical plates is required for achieving a given separation in distillation column with (A) No reflux (B) Total reflux (C) Zero reflux ratio (D) Minimum reflux ratio

Description : The minimum number of theoretical plates is required for achieving a given separation in distillation column with (A) No reflux (B) Total reflux (C) Zero reflux ratio (D) Minimum reflux ratio

Last Answer : (B) Total reflux

Fenske-Underwood equation used for calculating the minimum number of theoretical plates in distillation column is valid for (A) Constant molal overflow (B) Total reflux (C) Constant relative volatility (D) All (A), (B) and (C)

Description : Fenske-Underwood equation used for calculating the minimum number of theoretical plates in distillation column is valid for (A) Constant molal overflow (B) Total reflux (C) Constant relative volatility (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Fenske equation determines the (A) Maximum number of ideal plates (B) Height of the distillation column (C) Minimum number of theoretical plates (D) Optimum reflux ratio

Description : Fenske equation determines the (A) Maximum number of ideal plates (B) Height of the distillation column (C) Minimum number of theoretical plates (D) Optimum reflux ratio

Last Answer : (C) Minimum number of theoretical plates

. In a distillation column, with increase in the reflux ratio, the heat removed in the cooler (A) Increases (B) Decreases (C) Remains unaffected (D) And the heat required in reboiler decreases

Description : . In a distillation column, with increase in the reflux ratio, the heat removed in the cooler (A) Increases (B) Decreases (C) Remains unaffected (D) And the heat required in reboiler decreases

Last Answer : (A) Increases

For a fixed number of ideal stages in a distillation column, as the reflux ratio is increased, the difference in composition between the top and bottomproduct streams(A) Increases(B) Decreases(C) Remain unaffected(D) Passes through a maximum

Description : For a fixed number of ideal stages in a distillation column, as the reflux ratio is increased, the difference in composition between the top and bottom product streams (A) Increases (B) Decreases (C) Remain unaffected (D) Passes through a maximum

Last Answer : (A) Increases

The feed to fractionating column is changed from saturated vapour to saturated liquid. If the separation and reflux ratio remains unchanged, the number of ideal stages will (A) Increase (B) Decrease (C) Remain same (D) Depend on saturated boiling point; may increase or decrease

Description : The feed to fractionating column is changed from saturated vapour to saturated liquid. If the separation and reflux ratio remains unchanged, the number of ideal stages will (A) Increase (B) Decrease (C) Remain same (D) Depend on saturated boiling point; may increase or decrease

Last Answer : (A) Increase

In batch distillation with constant reflux, overhead product composition __________ with time. (A) Increases (B) Decreases (C) Does not vary (D) May increase on decrease, depends on the system

Description : In batch distillation with constant reflux, overhead product composition __________ with time. (A) Increases (B) Decreases (C) Does not vary (D) May increase on decrease, depends on the system

Last Answer : (B) Decreases

At what value of reflux ratio, number of theoretical plates in a distillation column is minimum? (A) 0 (B) 1 (C) ∞ (D) < 1

Description : At what value of reflux ratio, number of theoretical plates in a distillation column is minimum? (A) 0 (B) 1 (C) ∞ (D) < 1

Last Answer : (C) ∞

At __________ reflux, theoretical number of plates in a distillation coloumn is calculated using Fenske-Underwood equation. (A) Operating (B) Total (C) Minimum (D) Maximum permissible

Description : At __________ reflux, theoretical number of plates in a distillation coloumn is calculated using Fenske-Underwood equation. (A) Operating (B) Total (C) Minimum (D) Maximum permissible

Last Answer : (B) Total

When a multistage tray tower uses a minimum reflux ratio, it implies (A) Infinite trays and maximum reboiler heat load (B) Infinite trays and minimum reboiler heat load (C) Minimum trays and minimum reboiler heat load (D) Minimum trays and maximum reboiler heat load

Description : When a multistage tray tower uses a minimum reflux ratio, it implies (A) Infinite trays and maximum reboiler heat load (B) Infinite trays and minimum reboiler heat load (C) Minimum trays and minimum reboiler heat load (D) Minimum trays and maximum reboiler heat load

Last Answer : (A) Infinite trays and maximum reboiler heat load

In McCabe-Thiele method of theoretical plate calculation for a distillation column, the operating lines of stripping and rectifying sections coincide with the diagonal at __________ reflux. (A) Total (B) Minimum (C) Operating (D) Maximum permissible

Description : In McCabe-Thiele method of theoretical plate calculation for a distillation column, the operating lines of stripping and rectifying sections coincide with the diagonal at __________ reflux. (A) Total (B) Minimum (C) Operating (D) Maximum permissible

Last Answer : (A) Total

In distillation column design, the McCabe-Thiele procedure is inadequate and a Ponchan-Savarit procedure is needed, when (A) Saturated feed is not used (B) An azeotrope forms (C) The latent heat of vaporisation of the more and less volatile components are greatly different (D) A total condenser is used

Description : In distillation column design, the McCabe-Thiele procedure is inadequate and a Ponchan-Savarit procedure is needed, when (A) Saturated feed is not used (B) An azeotrope forms (C) The latent ... vaporisation of the more and less volatile components are greatly different (D) A total condenser is used

Last Answer : (D) A total condenser is used

Inside the distillation columns, the (A) Highest temperatures is near the feed plate (B) Driving force for the liquid flow is its weight (C) Vapors are not always at their dew points (D) All (A), (B) and (C)

Description : Inside the distillation columns, the (A) Highest temperatures is near the feed plate (B) Driving force for the liquid flow is its weight (C) Vapors are not always at their dew points (D) All (A), (B) and (C)

Last Answer : (B) Driving force for the liquid flow is its weigh

According to the Fenske equation, what will be the minimum number of plates required in a distillation column to separate an equimolar binary mixture of components A and B into an overhead fraction containing 99 mol% A and a bottom fraction containing 98 mol% B ? Assume that relative volatility (αAB = 2) does not change appreciably in the column. (A) 5 (B) 9 (C) 12 (D) 28

Description : According to the Fenske equation, what will be the minimum number of plates required in a distillation column to separate an equimolar binary mixture of components A and B into an overhead fraction containing 99 mol% A and a ... in the column. (A) 5 (B) 9 (C) 12 (D) 28

Last Answer : (C) 12

Pick out the correct statement. (A) The slope of the stripping line is always less than unity (B) For a given separation in a binary distillation column, with increase in reflux ratio (above the minimum reflux ratio), the fixed cost of the distillation column first increases and then decreases (C) In Ponchon-Savarit method of no. of theoretical plate determination, the stripping and rectifying operating lines are vertical at total reflux (D) Kremser-Brown-Souder's equation is used to calculate the efficiency of a plate tower

Description : Pick out the correct statement. (A) The slope of the stripping line is always less than unity (B) For a given separation in a binary distillation column, with increase in reflux ratio ( ... (D) Kremser-Brown-Souder's equation is used to calculate the efficiency of a plate tower

Last Answer : C) In Ponchon-Savarit method of no. of theoretical plate determination, the stripping and rectifying operating lines are vertical at total reflux

. For the same feed, feed quality and separation (in a distillation column), with the increase of total pressure, the number of ideal plates will (A) Increase (B) Decrease (C) Remain same (D) Data insufficient, can't be predicted

Description : . For the same feed, feed quality and separation (in a distillation column), with the increase of total pressure, the number of ideal plates will (A) Increase (B) Decrease (C) Remain same (D) Data insufficient, can't be predicted

Last Answer : (A) Increase

The operating cost of a distillation column at minimum reflux ratio is (A) Minimum (B) Maximum (C) Infinite (D) Zero

Description : The operating cost of a distillation column at minimum reflux ratio is (A) Minimum (B) Maximum (C) Infinite (D) Zero

Last Answer : (A) Minimum

Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of gases in solvent increases at a fixed temperature (C) Decrease in Murphree plate efficiency is an indication of entrainment in distillation column (D) The capacity of a distillation column is maximum at total reflux

Description : Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of ... in distillation column (D) The capacity of a distillation column is maximum at total reflux

Last Answer : (D) The capacity of a distillation column is maximum at total reflux

Choose the wrong statement (a) Temperature of medium being cooled must be below that of the evaporator (b) Refrigerant leaves the condenser as liquid (c) All solar thermally operated absorption systems are capable only of intermittent operation (d) frost on evaporator reduces heat transfer

Description : Choose the wrong statement (a) Temperature of medium being cooled must be below that of the evaporator (b) Refrigerant leaves the condenser as liquid (c) All solar thermally operated absorption systems are capable only of intermittent operation (d) frost on evaporator reduces heat transfer

Last Answer : Ans: a

On moving the feed line (q-line) from saturated liquid feed (vertical position) to saturated vapor feed (horizontal feed), if the slope of both the operating lines are to be increased, then it will result in (A) Greater degree of separation with a fixed number of trays (B) Increased reboiler load

Description : On moving the feed line (q-line) from saturated liquid feed (vertical position) to saturated vapor feed (horizontal feed), if the slope of both the operating lines are to be increased, then it will result in (A) Greater degree of separation with a fixed number of trays (B) Increased reboiler load

Last Answer : (C) Increased reflux ratio

Pick out the wrong statement. (A) In a batch reactor, which is exclusively used for liquid phase reactions; temperature pressure and composition may vary with time (B) In a semi-batch reactor, one reactant is charged batch wise, while the other reactant is fed continuously (C) In a continuous flow reactor, uniform concentration cannot be maintained throughout the vessel even in a well agitated system (D) In a continuous flow reactor, both the reactants and the products flow out continuously

Description : Pick out the wrong statement. (A) In a batch reactor, which is exclusively used for liquid phase reactions; temperature pressure and composition may vary with time (B) In a semi-batch reactor, ... system (D) In a continuous flow reactor, both the reactants and the products flow out continuously

Last Answer : (C) In a continuous flow reactor, uniform concentration cannot be maintained throughout the vessel even in a well agitated system

For the same process conditions, the reflux ratio of an unlagged distillation column (A) Decreases in winter (B) Increases in winter (C) Increases in summer (D) None of these

Description : For the same process conditions, the reflux ratio of an unlagged distillation column (A) Decreases in winter (B) Increases in winter (C) Increases in summer (D) None of these

Last Answer : (B) Increases in winter

Can the efficiency of a plate in the distillation tower be greater than 100%? (A) Yes (B) Normally not; but is possible if infinite number of plates are put(C) Never(D) Yes; if the reflux ratio is maximum

Description : Can the efficiency of a plate in the distillation tower be greater than 100%? (A) Yes (B) Normally not; but is possible if infinite number of plates are put (C) Never (D) Yes; if the reflux ratio is maximum

Last Answer : (C) Never

In a Rankine cycle, with the maximum steam temperature being fixed from metallurgical considerations, as the boiler pressure increases (a) The condenser load will increase [IES-1997] (b) The quality of turbine exhaust will decrease (c) The quality of turbine exhaust will increase (d) The quality of turbine exhaust will remain unchanged

Description : In a Rankine cycle, with the maximum steam temperature being fixed from metallurgical considerations, as the boiler pressure increases (a) The condenser load will increase [IES-1997] (b) The ... The quality of turbine exhaust will increase (d) The quality of turbine exhaust will remain unchanged

Last Answer : (b) The quality of turbine exhaust will decrease 

Which of the following is considered equivalent to one theoretical stage in Mc-Cabe Thiele's method? (A) Partial condenser (B) Total condenser (C) Reboiler (D) Both (B) and (C)

Description : Which of the following is considered equivalent to one theoretical stage in Mc-Cabe Thiele's method? (A) Partial condenser (B) Total condenser (C) Reboiler (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

According to Bernoulli's equation for steady ideal fluid flow (A) Principle of conservation of mass holds (B) Velocity and pressure are inversely proportional (C) Total energy is constant throughout (D) The energy is constant along a streamline but may vary across streamlines

Description : According to Bernoulli's equation for steady ideal fluid flow (A) Principle of conservation of mass holds (B) Velocity and pressure are inversely proportional (C) Total energy is constant throughout (D) The energy is constant along a streamline but may vary across streamlines

Last Answer : Answer: Option D

The reflux to a distillation column is 100 moles/hr, when the overhead product rate is 50 moles/hr. The reflux ratio is (A) 2 (B) 0.5 (C) 50 (D) 150

Description : The reflux to a distillation column is 100 moles/hr, when the overhead product rate is 50 moles/hr. The reflux ratio is (A) 2 (B) 0.5 (C) 50 (D) 150

Last Answer : (A) 2

A journal bearing with hydrodynamic lubrication is running steadily with a certain amount of minimum film thickness. When the load and speed are doubled, how does the minimum film thickness vary? [IES-2008] (a) Remains unchanged (b) Gets doubled (c) Gets reduced to one-fourth of original value (d) Gets reduced to half of original value

Description : A journal bearing with hydrodynamic lubrication is running steadily with a certain amount of minimum film thickness. When the load and speed are doubled, how does the minimum film thickness vary? [IES-2008 ... Gets reduced to one-fourth of original value (d) Gets reduced to half of original value

Last Answer : (a) Remains unchanged

For steady ideal fluid flow, the Bernoulli's equation states that the (A) Velocity is constant along a stream line (B) Energy is constant throughout the fluid (C) Energy is constant along a stream line, but may vary across stream lines (D) None of these

Description : For steady ideal fluid flow, the Bernoulli's equation states that the (A) Velocity is constant along a stream line (B) Energy is constant throughout the fluid (C) Energy is constant along a stream line, but may vary across stream lines (D) None of these

Last Answer : (C) Energy is constant along a stream line, but may vary across stream lines

A reversible liquid phase endothermic reaction is to be carried out in a plug flow reactor. For minimum reactor volume, it should be operated such that the temperature along the length (A) Decreases (B) Increases (C) Is at the highest allowable temperature throughout (D) First increases and then decreases

Description : A reversible liquid phase endothermic reaction is to be carried out in a plug flow reactor. For minimum reactor volume, it should be operated such that the temperature along the length (A) ... Increases (C) Is at the highest allowable temperature throughout (D) First increases and then decreases

Last Answer : (C) Is at the highest allowable temperature throughout

With lapse of time, the overhead composition of light component in case of batch distillation with constant reflux (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on system

Description : With lapse of time, the overhead composition of light component in case of batch distillation with constant reflux (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on system

Last Answer : (B) Decreases

In an ideal P.F.R. at steady state conditions (A) The composition of reactants remains constant along a flow path (B) The conversion of the reactant varies from point to point along a flow path (C) There is no lateral mixing of fluid (D) There may be diffusion along the flow path

Description : In an ideal P.F.R. at steady state conditions (A) The composition of reactants remains constant along a flow path (B) The conversion of the reactant varies from point to point along a flow path (C) There is no lateral mixing of fluid (D) There may be diffusion along the flow path

Last Answer : (B) The conversion of the reactant varies from point to point along a flow path

Reboiler is considered as one theoretical plate, because (A) Of the assumption that vapour and liquid leaving the reboiler are in equilibrium (B) Vapour is recycled to the column (C) Reboiler itself contains one plate (D) None of these

Description : Reboiler is considered as one theoretical plate, because (A) Of the assumption that vapour and liquid leaving the reboiler are in equilibrium (B) Vapour is recycled to the column (C) Reboiler itself contains one plate (D) None of these

Last Answer : (A) Of the assumption that vapour and liquid leaving the reboiler are in equilibrium

When the feed to a distillation column is a saturated liquid, slope of thefeed line is(A) Zero(B) Unity(C) Infinity(D) None of these

Description : When the feed to a distillation column is a saturated liquid, slope of thefeed line is (A) Zero (B) Unity (C) Infinity (D) None of these

Last Answer : (C) Infinity

In an ideal mixed reactor (at steady state), the (A) Space time is equivalent to holding time for constant density systems (B) Composition throughout the reactor remains same (C) Exit stream has the same composition as the fluid within the reactor (D) All (A), (B) and (C)

Description : In an ideal mixed reactor (at steady state), the (A) Space time is equivalent to holding time for constant density systems (B) Composition throughout the reactor remains same (C) Exit stream has the same composition as the fluid within the reactor (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Overall efficiency of the distillation column is (A) The ratio of number of ideal plates to actual plates (B) The ratio of number of actual plates to ideal plates (C) Same as the Murphree efficiency (D) Always more than the point efficiency

Description : Overall efficiency of the distillation column is (A) The ratio of number of ideal plates to actual plates (B) The ratio of number of actual plates to ideal plates (C) Same as the Murphree efficiency (D) Always more than the point efficiency

Last Answer : (A) The ratio of number of ideal plates to actual plates

Products drawn from the top to bottom of the crude oil distillation column has progressively increasing (A) Boiling points (B) Molecular weight (C) C/H ratio (D) All (A), (B) and (C)

Description : Products drawn from the top to bottom of the crude oil distillation column has progressively increasing (A) Boiling points (B) Molecular weight (C) C/H ratio (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Inside the distillation column, the (A) Driving force for the vapour flow is the pressure drop (B) Liquids are not always at their bubble points (C) Pressure increases gradually from bottom to the top of the column (D) None of these

Description : Inside the distillation column, the (A) Driving force for the vapour flow is the pressure drop (B) Liquids are not always at their bubble points (C) Pressure increases gradually from bottom to the top of the column (D) None of these

Last Answer : (A) Driving force for the vapour flow is the pressure drop