Thermocol (expanded polystyrene) is not used for (A) Low temperature thermal insulation as in refrigerator and air conditioners (B) Acoustic control and ceiling for building (C) High temperature thermal insulation in furnaces (D) Packing of delicate electronic gadgets

Thermocol (expanded polystyrene) is not used for
(A) Low temperature thermal insulation as in refrigerator and air
conditioners
(B) Acoustic control and ceiling for building
(C) High temperature thermal insulation in furnaces
(D) Packing of delicate electronic gadgets
by

1 Answer

Answer :

(C) High temperature thermal insulation in furnaces
by

Related questions

A ribbed slab is provided for (A) A plain ceiling (B) Thermal insulation (C) Acoustic insulation (D) All the above

Description : A ribbed slab is provided for (A) A plain ceiling (B) Thermal insulation (C) Acoustic insulation (D) All the above

Last Answer : Answer: Option D

Thermocol is a spongy, porous, rigid or flexible foamed plastic, obtained by blowing gas/air through molten (A) Saturated polyester (B) Polyurethane (C) Polystyrene (D) Either (B) or (C)

Description : Thermocol is a spongy, porous, rigid or flexible foamed plastic, obtained by blowing gas/air through molten (A) Saturated polyester (B) Polyurethane (C) Polystyrene (D) Either (B) or (C)

Last Answer : (D) Either (B) or (C)

Why are large air conditioners so delicate?

Description : Why are large air conditioners so delicate?

Last Answer : answer:A couple things could be going on. Power failures in general should not be the cause of total equipment failure and more often will cause electrical issues that should only require electrical components to ... a year and twice a year lubing of the drive shafts is minimum for our roof tops.

Thickness of stock does not affect the fuel economy of furnaces, if thematerial to be heated is of(A) Low emissivity(B) High thermal conductivity(C) Both (A) and (B)(D) Neither (A) nor (B)

Description : Thickness of stock does not affect the fuel economy of furnaces, if thematerial to be heated is of (A) Low emissivity (B) High thermal conductivity (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Polyurethane cannot be used to make (A) Automobile cushion (B) Thermal insulation in refrigerator (C) Coating and adhesive (D) Fibre reinforced plastic (FRP)

Description : Polyurethane cannot be used to make (A) Automobile cushion (B) Thermal insulation in refrigerator (C) Coating and adhesive (D) Fibre reinforced plastic (FRP)

Last Answer : (D) Fibre reinforced plastic (FRP)

Thiokol is nothing but (A) Polysulphide rubber (B) Polyamide fibre (C) Engineering plastic (D) Expanded polystyrene

Description : Thiokol is nothing but (A) Polysulphide rubber (B) Polyamide fibre (C) Engineering plastic (D) Expanded polystyrene

Last Answer : (A) Polysulphide rubber

Lavatory cisterns are normally made of (A) Expanded polystyrene (B) Saturated polyester (C) Perspex (D) PVC

Description : Lavatory cisterns are normally made of (A) Expanded polystyrene (B) Saturated polyester (C) Perspex (D) PVC

Last Answer : (A) Expanded polystyrene

Transistor parts and refrigerator components are normally made of (A) Polystyrene (B) Polyester (C) High density polythene (D) Polyurethane

Description : Transistor parts and refrigerator components are normally made of (A) Polystyrene (B) Polyester (C) High density polythene (D) Polyurethane

Last Answer : (A) Polystyrene

The heat recoverable from flue gases of furnaces depends on the (A) Thermal efficiency of furnace (B) Quantity of flue gases (C) Flue gas temperature drop through the furnace (D) All (A), (B) and (C)

Description : The heat recoverable from flue gases of furnaces depends on the (A) Thermal efficiency of furnace (B) Quantity of flue gases (C) Flue gas temperature drop through the furnace (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

It is used in refrigerator and air conditioners and it is a source of `Cl^(-)` :

Description : It is used in refrigerator and air conditioners and it is a source of `Cl^(-)` :

Last Answer : It is used in refrigerator and air conditioners and it is a source of `Cl^(-)` : A. Benzene B. `CH_(4)` C. Benzopyrene D. Freon.

Labeling is mandatory on product f. Frost Free Refrigerator c) Colour TV g. Room Air-conditioners d) All of the above

Description : Labeling is mandatory on product f. Frost Free Refrigerator c) Colour TV g. Room Air-conditioners d) All of the above

Last Answer : ALL OF THE ABOVE

Products on which labeling is mandatory are _____. a) Colour TV b) Direct cool refrigerator b) Room air conditioners d) All of the above

Description : Products on which labeling is mandatory are _____. a) Colour TV b) Direct cool refrigerator b) Room air conditioners d) All of the above

Last Answer : ALL OF THE ABOVE

Plate towers are preferred to packed towers, when large temperature changes are involved, because of the reason that the (A) Packing may be crushed due to thermal expansion/contraction of the components of the equipments (B) Pressure drop in the equipment will be very high (C) Viscosity variation of the fluids may cause channelling/flooding (D) None of these

Description : Plate towers are preferred to packed towers, when large temperature changes are involved, because of the reason that the (A) Packing may be crushed due to thermal expansion/contraction of the ... C) Viscosity variation of the fluids may cause channelling/flooding (D) None of these

Last Answer : (A) Packing may be crushed due to thermal expansion/contraction of the components of the equipments

Polystyrene is a light, transparent, thermoplastic material used for making (A) Toys and combs (B) Packaging bags (C) Non-sticking utensils (D) Electrical insulation

Description : Polystyrene is a light, transparent, thermoplastic material used for making (A) Toys and combs (B) Packaging bags (C) Non-sticking utensils (D) Electrical insulation

Last Answer : (A) Toys and combs

__________ is normally used for the manufacture of refrigerator components and transistor parts. (A) Polypropylene (B) Polystyrene (C) Polyester (D) Polyurethane

Description : __________ is normally used for the manufacture of refrigerator components and transistor parts. (A) Polypropylene (B) Polystyrene (C) Polyester (D) Polyurethane

Last Answer : (B) Polystyrene

Pick up correct statement from the following: (A) Fibre boards are used for thermal and acoustic control (B) Fibre boards are used for light weight standing members (C) Fibre boards are obtained by impregnating a resin product on fibres (D) All the above

Description : Pick up correct statement from the following: (A) Fibre boards are used for thermal and acoustic control (B) Fibre boards are used for light weight standing members (C) Fibre boards are obtained by impregnating a resin product on fibres (D) All the above

Last Answer : Answer: Option D

Can polystyrene ceiling cassettes be painted?

Description : Several cassettes fell off during the reconstruction of the terrace above my apartment and after gluing the new ones they do not have the same color (the new ones are whiter). Could it all be combined with paint? I can't do it with a brush, but I can handle a roller. Thank you :)

Last Answer : I think it would work, and especially with a roller, fine. They will just be greasy, clogged and wash them, degrease, that will be a problem.

Which of the following furnaces will have maximum thermal efficiency? (A) Soaking pits (B) Walking beam reheating furnace (C) Boiler furnace (D) Rotary kilns

Description : Which of the following furnaces will have maximum thermal efficiency? (A) Soaking pits (B) Walking beam reheating furnace (C) Boiler furnace (D) Rotary kilns

Last Answer : (C) Boiler furnace

Thermal efficiency of furnaces can be improved by (A) Waste heat recovery from flue gas (B) Minimising heat losses from furnace walls(C) Maintaining proper draught(D) All (A), (B) and (C

Description : Thermal efficiency of furnaces can be improved by (A) Waste heat recovery from flue gas (B) Minimising heat losses from furnace walls (C) Maintaining proper draught (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

Insulation of HUPky with polystyrene?

Description : Hi. I have such a problem, we have thin walls and since there is a built-in HUP in the northern wall, only 10 cm of masonry remains behind it and a room follows. The wall in this place is ... contents except for the clock, or HUPs where polystyrene was all over the door, is there a rule? Thanks

Last Answer : It is not advisable to play with gas, so I would not rely on lay advice. Try to contact the gas provider or the supplier that built the HUP. It had to be according to the project and therefore according to the valid standard. But it's definitely not okay. :)

When a solid-state component of an electronic circuit is mounted to a metallic mass, the general purpose of that mass is to ____________. A. prevent vibration damage to delicate components B. prevent mechanical damage to solid-state components C. dissipate stray magnetic currents D. act as a heat sink

Description : When a solid-state component of an electronic circuit is mounted to a metallic mass, the general purpose of that mass is to ____________. A. prevent vibration damage to delicate components B. prevent ... damage to solid-state components C. dissipate stray magnetic currents D. act as a heat sink

Last Answer : Answer: D

Pick out the wrong statement pertaining to the properties of glasses. Glasses generally have (A) High electrical insulation properties (B) Sharp melting points (C) Low co-efficient of thermal expansion (D) Compressive strength much greater than their tensile strengths

Description : Pick out the wrong statement pertaining to the properties of glasses. Glasses generally have (A) High electrical insulation properties (B) Sharp melting points (C) Low co-efficient of thermal expansion (D) Compressive strength much greater than their tensile strengths

Last Answer : (B) Sharp melting points

If a delicate component must be soldered into a circuit, the component may be protected from the heat of the soldering process by _____________. A. operating the soldering gun not more than 60 seconds at a time B. using a thermal shunt C. pre-oxidizing the leads to be soldered D. coating the leads to be soldered with a light oil film

Description : If a delicate component must be soldered into a circuit, the component may be protected from the heat of the soldering process by _____________. A. operating the soldering gun not more than 60 seconds at ... oxidizing the leads to be soldered D. coating the leads to be soldered with a light oil film

Last Answer : Answer: B

Soft coke is not (A) Produced by low temperature carbonisation of coal (B) A domestic fuel (C) Used in blast furnaces (D) None of these

Description : Soft coke is not (A) Produced by low temperature carbonisation of coal (B) A domestic fuel (C) Used in blast furnaces (D) None of these

Last Answer : (C) Used in blast furnaces

Ingress of cold air in the furnaces through cracks, charging doors, openings etc(A) Reduces the flue gas temperature and makes the furnace atmosphereoxidising(B) Increases the load on the induced draft fan(C) Reduces the furnace draught(D) All (A), (B) and (C)

Description : Ingress of cold air in the furnaces through cracks, charging doors, openings etc (A) Reduces the flue gas temperature and makes the furnace atmosphere oxidising (B) Increases the load on the induced draft fan (C) Reduces the furnace draught (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

LSHS is a type of furnace oil, which (A) Is more viscous than high viscosity furnace oil (HVFO) (B) Stands for low sulphur heavy stock (C) Is an ideal fuel for metallurgical furnaces due to its lower sulphur content (< 1%(D) All (A), (B) and (C))

Description : LSHS is a type of furnace oil, which (A) Is more viscous than high viscosity furnace oil (HVFO) (B) Stands for low sulphur heavy stock (C) Is an ideal fuel for metallurgical furnaces due to its lower sulphur content (< 1%) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which gas is produced while burning thermocol?

Description : Which gas is produced while burning thermocol?

Last Answer : When the combustion is complete 99 % of polystyrene is transformed in carbon dioxide and water.

Do manufacturers purposely make computers, and other electronic gadgets with a limited life span?

Description : Do manufacturers purposely make computers, and other electronic gadgets with a limited life span?

Last Answer : answer:Yes. It's called obsolescence. Products are designed to become out-of-date or to have a limited lifespan. I remember as a kid we owned a Hoover vacuum cleaner. That thing went for ... Now, washing machines break down within a few years. Keeps manufacturers in business though doesn't it?

Does anyone know what happened to Golden-Shellback? Supposedly a company developed a technique for waterproofing electronic gadgets, but after a lot of intial hype and media attention, they seem to have disappeared. Where'd they go?

Description : Does anyone know what happened to Golden-Shellback? Supposedly a company developed a technique for waterproofing electronic gadgets, but after a lot of intial hype and media attention, they seem to have disappeared. Where'd they go?

Last Answer : I remember them, but their treatment was really expensive. There were youtube clips of an iphone playing songs under water, even using the screen to navigate to show it wasn't a dummy phone. That's ... and Gorilla Glass. Then I wouldn't be so paranoid about dropping it in a rain puddle : )

Are there any electronic gadgets available that measure moisture and other soil factors in a garden?

Description : Are there any electronic gadgets available that measure moisture and other soil factors in a garden?

Last Answer : Yes there is the HQRP 4-Pin Moisture Analizer Gauge Tester.

Mention some electronic gadgets.

Description : Mention some electronic gadgets.

Last Answer : Mobile phone, Laptop, tablet, computers, ultra sound scanner, X-ray etc.

The gas used in a refrigerator is - (1) cooled down on flowing (2) heated up on flowing (3) cooled down when compressed (4) cooled down when expanded

Description : The gas used in a refrigerator is - (1) cooled down on flowing (2) heated up on flowing (3) cooled down when compressed (4) cooled down when expanded

Last Answer : (4) cooled down when expanded Explanation: Common refrigerants used in various applications are ammonia, sulfur dioxide, and non-halogenated hydrocarbons such as propane. Compressing these gasses into liquids they are made to give up their heat.

When a gas is expanded from high pressure region to low pressure region; temperature change occurs". This phenomenon is related to the (A) Gibbs-Duhem equation (B) Gibbs-Helmholtz equation (C) Third law of thermodynamics (D) Joule-Thomson effect

Description : When a gas is expanded from high pressure region to low pressure region; temperature change occurs". This phenomenon is related to the (A) Gibbs-Duhem equation (B) Gibbs-Helmholtz equation (C) Third law of thermodynamics (D) Joule-Thomson effect

Last Answer : (D) Joule-Thomson effect

In furnaces operating at very high temperature (say) 1250°C, e.g. soaking pit), the maximum heat transfer takes place by (A) Conduction (B) Convection (C) Radiation (D) Cannot be predicted

Description : In furnaces operating at very high temperature (say) 1250°C, e.g. soaking pit), the maximum heat transfer takes place by (A) Conduction (B) Convection (C) Radiation (D) Cannot be predicted

Last Answer : (C) Radiation

Maximum heat transfer in high temperature furnaces is by (A) Conduction (B) Convection (C) Radiation (D) Either (A), (B) or (C); depends on the type of furnace

Description : Maximum heat transfer in high temperature furnaces is by (A) Conduction (B) Convection (C) Radiation (D) Either (A), (B) or (C); depends on the type of furnace

Last Answer : (C) Radiation

Noise from random acoustic or electric noise that has equal energy per cycle over a specified total frequency band. A. Gaussian noise B. Whiter noise C. Thermal noise D. All of the above

Description : Noise from random acoustic or electric noise that has equal energy per cycle over a specified total frequency band. A. Gaussian noise B. Whiter noise C. Thermal noise D. All of the above

Last Answer : D. All of the above

Noise from random acoustic or electric noise that has equal per cycle over a specified total frequency band. A. Thermal noise B. White noise C. Gaussian noise D. All of these

Description : Noise from random acoustic or electric noise that has equal per cycle over a specified total frequency band. A. Thermal noise B. White noise C. Gaussian noise D. All of these

Last Answer : D. All of these

A steam pipe is intended to be insulated with two layers of insulating materials of different thermal conductivities. For minimum heat transfer to take place (A) The better insulation material should be put just next to pipe (i.e., inside) (B) The better insulating material should be put outside (C) Either of the insulating material could be put on either side (D) Steam temperature is considered before deciding as to which insulating material is to be put inside (i.e., just next to the pipe)

Description : A steam pipe is intended to be insulated with two layers of insulating materials of different thermal conductivities. For minimum heat transfer to take place (A) The better insulation material should be put just ... to which insulating material is to be put inside (i.e., just next to the pipe)

Last Answer : (A) The better insulation material should be put just next to pipe (i.e., inside)

Need a lot of home repairs roof Leaking, floor tile bathroom coming off of floor, toilet leaks not able to use bedroom no insulation on home addition. plaster falling from ceiling ,retired on fixed income?

Description : Need a lot of home repairs roof Leaking, floor tile bathroom coming off of floor, toilet leaks not able to use bedroom no insulation on home addition. plaster falling from ceiling ,retired on fixed income?

Last Answer : Where can I get grants that don,t need to pay bacK?

Fuel economy in furnaces can be achieved by (A) Using oxygen enriched combustion air (B) Preheating the combustion air (C) Reducing the heat loss through furnace openings & doors (D) All (A), (B) and (C

Description : Fuel economy in furnaces can be achieved by (A) Using oxygen enriched combustion air (B) Preheating the combustion air (C) Reducing the heat loss through furnace openings & doors (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

Product of which labelling is voluntary .... v. Frost Free Refrigerator.C) Colour TV D) Distribution TransformeR vi. Ceiling Fans

Description : Product of which labelling is voluntary .... v. Frost Free Refrigerator.C) Colour TV D) Distribution TransformeR vi. Ceiling Fans

Last Answer : CEILING FANS

On which products is Labeling Voluntary a) Direct cool Refrigerator b) Ceiling fans c) Colour TV d) Tubular Florescent Lamps

Description : On which products is Labeling Voluntary a) Direct cool Refrigerator b) Ceiling fans c) Colour TV d) Tubular Florescent Lamps

Last Answer : ceiling fans

Following product have big BEE Star Rating label a. Ceiling fans c. Tube light b. Refrigerator d. Television

Description : Following product have big BEE Star Rating label a. Ceiling fans c. Tube light b. Refrigerator d. Television

Last Answer : Refrigerator

Following product have small BEE Star Rating label a. Refrigerator c. Geysers b. Washing machine d. Ceiling fans

Description : Following product have small BEE Star Rating label a. Refrigerator c. Geysers b. Washing machine d. Ceiling fans

Last Answer : Ceiling fans

Follow product has big label. A) Ceiling fan. C) Tubelight B) Computer. D) Refrigerator

Description : Follow product has big label. A) Ceiling fan. C) Tubelight B) Computer. D) Refrigerator

Last Answer : Refrigerator

Forced recirculation of furnace gases is practised (A) To increase heat transfer by convection (B) To ensure uniform temperature (C) In furnaces, operating below 750°C (D) All (A), (B) and (C)

Description : Forced recirculation of furnace gases is practised (A) To increase heat transfer by convection (B) To ensure uniform temperature (C) In furnaces, operating below 750°C (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point (C) Each ton of petroleum oil on distillation produces about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Description : Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches ... about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Last Answer : (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point

Due to which of the following reasons the cables should not be operated too hot ? (a) The oil may loose its viscosity and it may start drawing off from higher levels (b) Expansion of the oil may cause the sheath to burst (c) Unequal expansion may create voids in the insulation which will lead to ionization (d) The thermal instability may rise due to the rapid increase of dielectric losses with temperature (e) All of the above

Description : Due to which of the following reasons the cables should not be operated too hot ? (a) The oil may loose its viscosity and it may start drawing off from higher levels (b) Expansion of the ... instability may rise due to the rapid increase of dielectric losses with temperature (e) All of the above

Last Answer : (e) All of the above

Which of the following statements is true concerning the cleaning of electrical contacts? A. Compressed air should be used to blow out metallic dust. B. Magnetic brushes should be used to remove metallic dust. C. The contact surfaces should be greased to increase contact resistance. D. Delicate parts should be cleaned with a brush and an approved safety solvent.

Description : Which of the following statements is true concerning the cleaning of electrical contacts? A. Compressed air should be used to blow out metallic dust. B. Magnetic brushes should be used to remove ... contact resistance. D. Delicate parts should be cleaned with a brush and an approved safety solvent.

Last Answer : Answer: D