Condensation of bisphenol A with phosgene produces __________ which possess very good heat resistance. (A) Polyurethane (B) Polysulfone (C) Polycarbonate (D) Polyester

Condensation of bisphenol A with phosgene produces __________
which possess very good heat resistance.
(A) Polyurethane
(B) Polysulfone
(C) Polycarbonate
(D) Polyester
by

1 Answer

Answer :

(C) Polycarbonate
by

Related questions

Bisphenol A is produced by the condensation of acetone with (A) Formaldehyde (B) Ethyl alcohol (C) Diethyl ether (D) Phenol

Description : Bisphenol A is produced by the condensation of acetone with (A) Formaldehyde (B) Ethyl alcohol (C) Diethyl ether (D) Phenol

Last Answer : (D) Phenol

__________ is normally used for the manufacture of refrigerator components and transistor parts. (A) Polypropylene (B) Polystyrene (C) Polyester (D) Polyurethane

Description : __________ is normally used for the manufacture of refrigerator components and transistor parts. (A) Polypropylene (B) Polystyrene (C) Polyester (D) Polyurethane

Last Answer : (B) Polystyrene

Thermocol is a spongy, porous, rigid or flexible foamed plastic, obtained by blowing gas/air through molten (A) Saturated polyester (B) Polyurethane (C) Polystyrene (D) Either (B) or (C)

Description : Thermocol is a spongy, porous, rigid or flexible foamed plastic, obtained by blowing gas/air through molten (A) Saturated polyester (B) Polyurethane (C) Polystyrene (D) Either (B) or (C)

Last Answer : (D) Either (B) or (C)

Transistor parts and refrigerator components are normally made of (A) Polystyrene (B) Polyester (C) High density polythene (D) Polyurethane

Description : Transistor parts and refrigerator components are normally made of (A) Polystyrene (B) Polyester (C) High density polythene (D) Polyurethane

Last Answer : (A) Polystyrene

Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Description : Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Last Answer : (B) Bakelite

Dacron is a/an (A) Addition polymer (B) Condensation polymer (C) Polyester (D) Both (B) and (C)

Description : Dacron is a/an (A) Addition polymer (B) Condensation polymer (C) Polyester (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Description : Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Last Answer : (B) Bakelite

Which of the following statements are correct about chloroform? a. Liquid fuel b. Anaesthetic in nature c. Produces phosgene d. Fire extinguisher (1) a, b (2) a, c (3) b, c (4) d, a

Description : Which of the following statements are correct about chloroform? a. Liquid fuel b. Anaesthetic in nature c. Produces phosgene d. Fire extinguisher (1) a, b (2) a, c (3) b, c (4) d, a

Last Answer : b, c

TLV of ozone (O3 ) and phosgene (COCl2 ) in air is __________ ppm. (A) 0.1 (B) 25 (C) 100(D) 1000

Description : TLV of ozone (O3 ) and phosgene (COCl2 ) in air is __________ ppm. (A) 0.1 (B) 25 (C) 100 (D) 1000

Last Answer : (A) 0.1

Threshold limit value (TLV) means maximum permissible/acceptable concentration. TLV of phosgene in air is about __________ ppm (parts per million). (A) 0.002 (B) 0.2 (C) 1.2 (D) 4.8

Description : Threshold limit value (TLV) means maximum permissible/acceptable concentration. TLV of phosgene in air is about __________ ppm (parts per million). (A) 0.002 (B) 0.2 (C) 1.2 (D) 4.8

Last Answer : (B) 0.2

Threshold limit value (TLV) i.e., the maximum permissible safe limit of phosgene gas which Hitler used to use to kill his enemies in 'gas chamber' is about __________ ppm. (A) < 1 (B) 10-100 (C) 100-200 (D) 100-1000

Description : Threshold limit value (TLV) i.e., the maximum permissible safe limit of phosgene gas which Hitler used to use to kill his enemies in 'gas chamber' is about __________ ppm. (A) < 1 (B) 10-100 (C) 100-200 (D) 100-1000

Last Answer : (A) < 1

Out of the following, TLV of __________ is the minimum (about 0.02 ppm). (A) Phosgene (B) Bromine (C) MIC (Methyl isocyanate) (D) Ozone

Description : Out of the following, TLV of __________ is the minimum (about 0.02 ppm). (A) Phosgene (B) Bromine (C) MIC (Methyl isocyanate) (D) Ozone

Last Answer : (C) MIC (Methyl isocyanate)

Condensation polymerisation of __________ produces Bakelite. (A) Propylene (B) Phenol & formaldehyde (C) Phenol & acetaldehyde (D) Urea & formaldehyde

Description : Condensation polymerisation of __________ produces Bakelite. (A) Propylene (B) Phenol & formaldehyde (C) Phenol & acetaldehyde (D) Urea & formaldehyde

Last Answer : (B) Phenol & formaldehyde

Exothermic condensation reaction of monochlorobenzene with chloral in presence of 20% oleum as catalyst produces DDT. The reaction temperature is maintained at __________ °C. (A) 15-30 (B) 90-100 (C) 250-300 (D) < 0

Description : Exothermic condensation reaction of monochlorobenzene with chloral in presence of 20% oleum as catalyst produces DDT. The reaction temperature is maintained at __________ °C. (A) 15-30 (B) 90-100 (C) 250-300 (D) < 0

Last Answer : (A) 15-30

Reaction of dimethyl terephthalate (DMT) and ethylene glycol produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Description : Reaction of dimethyl terephthalate (DMT) and ethylene glycol produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Last Answer : (B) Dacron

Reaction of ethylene glycol and dimethyl terephthalate (DMT) produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Description : Reaction of ethylene glycol and dimethyl terephthalate (DMT) produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Last Answer : (B) Dacron

What is the safety of the epoxy lining in steel cans called bisphenol A used in canned tomatoes?

Description : What is the safety of the epoxy lining in steel cans called bisphenol A used in canned tomatoes?

Last Answer : Check out this background info by Environment California for details on health risks of Bisphenol A, which is used in many baby bottles. No idea if the tiny amount in your canned ... to be concerned. http://www.environmentcalifornia.org/environmental-health/stop-toxic-toys/bisphenol-a-overview

: Which of the following is a common bisphenol in widespread use in antibacterial soaps? a. Chlorhexidine b. Betadine c. Triclosan d. Alcohol

Description : : Which of the following is a common bisphenol in widespread use in antibacterial soaps? a. Chlorhexidine b. Betadine c. Triclosan d. Alcohol

Last Answer : c. Triclosan

If my eyeglass prescription is +4.75, is a polycarbonate lens going to be too thick for plastic frames?

Description : If my eyeglass prescription is +4.75, is a polycarbonate lens going to be too thick for plastic frames?

Last Answer : Your optician can give you the best answer on that. I do not even know what a polycarbonate lens is. I expect him to know that. I do know, however, that more powerful prescriptions that normally ... be made from materials that will give you a thinner lens. Costs more, so depends on your choices.

Do you recommend the white, polycarbonate MacBook?

Description : Do you recommend the white, polycarbonate MacBook?

Last Answer : The 13” aluminum is now a MacBook Pro. The MacBook is only available in the white polycarbonate.

What are the advantages of polycarbonate roofing?

Description : What are the advantages of polycarbonate roofing?

Last Answer : One advantage of a polycarbonate roof is that it is much less expensive than a glass roof. They are also easy to manipulate if you plan on installing them yourself.

Cellular polycarbonate - what is it and what is it for?

Description : Cellular polycarbonate - what is it and what is it for?

Last Answer : Cellular polycarbonate - what is it and what is it for? Cellular polycarbonate is a type of plastic sheet, an artificially created synthetic material known for its unique ... automotive industry, aircraft construction, the electronics industry, electrical engineering, medicine, and optics.

Condensing film co-efficient for steam on horizontal tubes ranges from 5000 to 15000 Kcal/hr.m2 .°C. Condensation of vapor is carried out inside the tube in a shell and tube heat exchanger, when the (A) Higher condensing film co-efficient is desired (B) Condensate is corrosive in nature (C) Lower pressure drop through the exchanger is desired (D) Temperature of the incoming vapor is very high Answer: Option B

Description : Condensing film co-efficient for steam on horizontal tubes ranges from 5000 to 15000 Kcal/hr.m2 .°C. Condensation of vapor is carried out inside the tube in a shell and tube heat ... drop through the exchanger is desired (D) Temperature of the incoming vapor is very high

Last Answer : (B) Supersaturated

A measure of the extent to which viscous heating is important relative to the heat flow resulting from the impressed temperature difference is represented by the __________ number. (A) Condensation (B) Grashoff (C) Stanton (D) Brinkman

Description : A measure of the extent to which viscous heating is important relative to the heat flow resulting from the impressed temperature difference is represented by the __________ number. (A) Condensation (B) Grashoff (C) Stanton (D) Brinkman

Last Answer : (D) Brinkman

Removal of __________ heat is involved in the condensation of a vapor under saturated conditions. (A) Super (B) Sensible (C) Latent (D) Both (B) & (C)

Description : Removal of __________ heat is involved in the condensation of a vapor under saturated conditions. (A) Super (B) Sensible (C) Latent (D) Both (B) & (C)

Last Answer : (B) Sensible

The heat transfer co-efficient in film type condensation is __________ that for dropwise condensation. (A) Greater than (B) Lower than (C) Is same as (D) Half

Description : The heat transfer co-efficient in film type condensation is __________ that for dropwise condensation. (A) Greater than (B) Lower than (C) Is same as (D) Half

Last Answer : (B) Lower than

Unbreakable crockeries are made from __________ polymers. (A) Polystyrene (B) Melamine (C) Polystyrene (D) Polyurethane

Description : Unbreakable crockeries are made from __________ polymers. (A) Polystyrene (B) Melamine (C) Polystyrene (D) Polyurethane

Last Answer : (B) Melamine

__________ is produced by polymerisation of chloroprene. (A) Thiokol (a polysulphide rubber) (B) Butyl rubber (C) Neoprene (D) Polyurethane rubber

Description : __________ is produced by polymerisation of chloroprene. (A) Thiokol (a polysulphide rubber) (B) Butyl rubber (C) Neoprene (D) Polyurethane rubber

Last Answer : (C) Neoprene

Unbreakable crockeries are made from __________ polymers. (A) Polystyrene (B) Melamine (C) Polystyrene (D) Polyurethane

Description : Unbreakable crockeries are made from __________ polymers. (A) Polystyrene (B) Melamine (C) Polystyrene (D) Polyurethane

Last Answer : (D) Polyurethane

The Killer gas which caused Bhopal gas tragedy in 1984 was (A) Phosgene (B) Methyl isocyanate (MIC) (C) Carbon monoxide (D) Sulphur dioxide

Description : The Killer gas which caused Bhopal gas tragedy in 1984 was (A) Phosgene (B) Methyl isocyanate (MIC) (C) Carbon monoxide (D) Sulphur dioxide

Last Answer : (B) Methyl isocyanate (MIC)

Industrial production of chloroform requires acetone and (A) Phosgene (B) Calcium hypochlorite (C) Chlorine (D) Ammonium chloride

Description : Industrial production of chloroform requires acetone and (A) Phosgene (B) Calcium hypochlorite (C) Chlorine (D) Ammonium chloride

Last Answer : (B) Calcium hypochlorite

Most of the fibre forming polymers are crystalline in nature, one of the exceptions being __________ which is amorphous in nature. (A) Nylon (B) Polyacrylonitrile (C) Polypropylene (D) Polyester

Description : Most of the fibre forming polymers are crystalline in nature, one of the exceptions being __________ which is amorphous in nature. (A) Nylon (B) Polyacrylonitrile (C) Polypropylene (D) Polyester

Last Answer : (B) Polyacrylonitrile

Rayon is a __________ fibre. (A) Cellulosic (B) Polyamide (C) Polyester (D) Natural

Description : Rayon is a __________ fibre. (A) Cellulosic (B) Polyamide (C) Polyester (D) Natural

Last Answer : (A) Cellulosic

Melt spinning of polymers involves the forcing of polymer melt through spinnerates (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter polymer melt to harden into filaments. Melt spinning is not used in case of the __________ fibres. (A) Acrylic (B) Polyester (C) Nylon 6:6 (D) Polypropylene

Description : Melt spinning of polymers involves the forcing of polymer melt through spinnerates (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter ... the __________ fibres. (A) Acrylic (B) Polyester (C) Nylon 6:6 (D) Polypropylene

Last Answer : (A) Acrylic

__________ is not a polyester fibre. (A) Terylene (B) Dacron (C) Nylon (D) Polyacrylonitrile

Description : __________ is not a polyester fibre. (A) Terylene (B) Dacron (C) Nylon (D) Polyacrylonitrile

Last Answer : (C) Nylon

__________ are produced by reacting polybasic acid (e.g. Phthalic anhydride) with polyhydric alcohol (e.g., glycerol). (A) Unsaturated polyester (B) Alkyd resins (C) Saturated polyester (D) Amino resins

Description : __________ are produced by reacting polybasic acid (e.g. Phthalic anhydride) with polyhydric alcohol (e.g., glycerol). (A) Unsaturated polyester (B) Alkyd resins (C) Saturated polyester (D) Amino resins

Last Answer : (B) Alkyd resins

Glyptal used in the manufacture of paints & lacquers is a __________ polymer. (A) Polyamide (B) Polystyrene (C) Polyester (D) Polyacrylonitril

Description : Glyptal used in the manufacture of paints & lacquers is a __________ polymer. (A) Polyamide (B) Polystyrene (C) Polyester (D) Polyacrylonitril

Last Answer : (C) Polyester

In industrial operations fluids with temperature less than __________ are set as the limit for waste heat recovery because of the risk of condensation of corrosive liquids a. 80C b. 100C c. 120C d. 200C

Description : In industrial operations fluids with temperature less than __________ are set as the limit for waste heat recovery because of the risk of condensation of corrosive liquids a. 80C b. 100C c. 120C d. 200C

Last Answer : 100C

Phosgene is obtained by the reaction of carbon monoxide and which gas? -Do You Know?

Description : Phosgene is obtained by the reaction of carbon monoxide and which gas? -Do You Know?

Last Answer : answer:

What intermolecular forces are in phosgene Cl2CO?

Description : What intermolecular forces are in phosgene Cl2CO?

Last Answer : Feel Free to Answer

The Bhopal tragedy was caused by the gas - (1) phosgene (2) carbon monoxide (3) methyl isocyanate (4) chlorine

Description : The Bhopal tragedy was caused by the gas - (1) phosgene (2) carbon monoxide (3) methyl isocyanate (4) chlorine

Last Answer : (3) methyl isocyanate Explanation: The Bhopal disaster occurred on the night of 2-3 December 1984 at the Union Carbide India Limited (UCIL) pesticide plant in Bhopal, Madhya Pradesh. Over 500,000 people were exposed to methyl isocyanate gas and other chemicals.

Phosgene is obtained by the reaction of carbon monoxide and which gas?

Description : Phosgene is obtained by the reaction of carbon monoxide and which gas?

Last Answer : Chlorine

Which of the following poisonous gas is formed when chloroform is exposed to light and air? (a) Mustard gas (b) Carbon monoxide (c) Phosgene (d) Chlorine

Description : Which of the following poisonous gas is formed when chloroform is exposed to light and air? (a) Mustard gas (b) Carbon monoxide (c) Phosgene (d) Chlorine

Last Answer : Phosgene

Phosgene is obtained by the reaction of carbon monoxide and which gas?

Description : Phosgene is obtained by the reaction of carbon monoxide and which gas?

Last Answer : Chlorine

The Bhopal tragedy was caused by the gas (1) phosgene (2) carbon monoxide (3) methyl isocyanate (4) chlorine

Description : The Bhopal tragedy was caused by the gas (1) phosgene (2) carbon monoxide (3) methyl isocyanate (4) chlorine

Last Answer : methyl isocyanate

Shock resisting steels should possess high (A) Hardness (B) Toughness (C) Tensile strength (D) Wear resistance

Description : Shock resisting steels should possess high (A) Hardness (B) Toughness (C) Tensile strength (D) Wear resistance

Last Answer : (B) Toughness

The resistance furnace produces heat by the (A) Electric arc struck between electrodes and the charge (B) Flow of current through a heating element (C) Combination of induced current and skin effect (D) None of these

Description : The resistance furnace produces heat by the (A) Electric arc struck between electrodes and the charge (B) Flow of current through a heating element (C) Combination of induced current and skin effect (D) None of these

Last Answer : (B) Flow of current through a heating element

Is it OK to throw fleece in the dryer? What happens to polyester blends in heat?

Description : Is it OK to throw fleece in the dryer? What happens to polyester blends in heat?

Last Answer : I dry fleece in my dryer--but only on low heat. Polyester blends do well in the dryer, very well. But I don't know what would happen if you set one afire!

Presence of a non-condensing gas in a condensing vapour (A) Increases the rate of condensation (B) Decreases thermal resistance (C) Is desirable to increase the film co-efficient (D) None of these

Description : Presence of a non-condensing gas in a condensing vapour (A) Increases the rate of condensation (B) Decreases thermal resistance (C) Is desirable to increase the film co-efficient (D) None of these

Last Answer : (D) None of these

The change in enthalpy per unit weight of adsorbed gas when adsorbed on gas free or "outgassed" adsorbent to from a definite concentration of adsorbate is called its (A) Integral heat of adsorption (B) Heat of wetting (C) Differential heat of adsorption (D) Heat of normal condensation

Description : The change in enthalpy per unit weight of adsorbed gas when adsorbed on gas free or "outgassed" adsorbent to from a definite concentration of adsorbate is called its (A) Integral heat of adsorption (B) Heat of wetting (C) Differential heat of adsorption (D) Heat of normal condensation

Last Answer : (A) Integral heat of adsorption