Polyvinyl chloride (PVC) (A) Is produced by Polycondensation reaction (B) Uses either emulsion or suspension polymerisation methods (C) Can be made thermosetting by adding a plasticiser (D) Softening temperature is 200°C

Polyvinyl chloride (PVC)
(A) Is produced by Polycondensation reaction
(B) Uses either emulsion or suspension polymerisation methods
(C) Can be made thermosetting by adding a plasticiser
(D) Softening temperature is 200°C
by

1 Answer

Answer :

(B) Uses either emulsion or suspension polymerisation methods
by

Related questions

. Polyvinyl chloride (PVC) is (A) A thermosetting material (B) A condensation polymerisation product (C) Made by employing emulsion polymerisation (D) None of these

Description : . Polyvinyl chloride (PVC) is (A) A thermosetting material (B) A condensation polymerisation product (C) Made by employing emulsion polymerisation (D) None of these

Last Answer : (C) Made by employing emulsion polymerisation

. Polyvinyl chloride (PVC) is (A) A thermosetting material (B) A condensation polymerisation product (C) Made by employing emulsion polymerisation (D) None of these

Description : . Polyvinyl chloride (PVC) is (A) A thermosetting material (B) A condensation polymerisation product (C) Made by employing emulsion polymerisation (D) None of these

Last Answer : (C) Made by employing emulsion polymerisation

Pick out the wrong statement. (A) Linear polymers are formed from bifunctional groups only and are normally thermoplastic (B) Cross-linked branched chain polymers are either elastometric or thermosetting (C) Branching in case of cross-linked polymers caused by small amount of impurities in bifunctional monomer formulation reduces its solubility and increases the softening point (D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Description : Pick out the wrong statement. (A) Linear polymers are formed from bifunctional groups only and are normally thermoplastic (B) Cross-linked branched chain polymers are either elastometric or ... (D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Last Answer : D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Which of the following polymers are produced by employing all bulk polymerisation, solution polymerisation & suspension polymerisation technique of addition (chain) polymerisation(A) PVC(B) Bakelite(C) PTFE(D) Epoxy resin

Description : Which of the following polymers are produced by employing all bulk polymerisation, solution polymerisation & suspension polymerisation technique of addition (chain) polymerisation (A) PVC (B) Bakelite (C) PTFE (D) Epoxy resin

Last Answer : (A) PVC

Temperature maintained in the emulsion polymerisation reactor for PVC manufacture is about __________ ° C. (A) -20 (B) 50 (C) 250 (D) 500

Description : Temperature maintained in the emulsion polymerisation reactor for PVC manufacture is about __________ ° C. (A) -20 (B) 50 (C) 250 (D) 500

Last Answer : (B) 50

Styrene butadiene rubber is commercially manufactured by (A) Bulk polymerisation (B) Suspension polymerisation (C) Solution polymerisation (D) Emulsion polymerisation

Description : Styrene butadiene rubber is commercially manufactured by (A) Bulk polymerisation (B) Suspension polymerisation (C) Solution polymerisation (D) Emulsion polymerisation

Last Answer : (D) Emulsion polymerisation

Commercial production of polypropylene employs __________ polymerisation. (A) Emulsion (B) Suspension (C) Solution (D) Bulk

Description : Commercial production of polypropylene employs __________ polymerisation. (A) Emulsion (B) Suspension (C) Solution (D) Bulk

Last Answer : (C) Solution

Reactor used in the production of polyvinyl chloride (PVC) is made of (A) Nickel or glass lined steel (B) Aluminium (C) Tantalum (D) Lead

Description : Reactor used in the production of polyvinyl chloride (PVC) is made of (A) Nickel or glass lined steel (B) Aluminium (C) Tantalum (D) Lead

Last Answer : (A) Nickel or glass lined steel

__________ is a thermosetting plastic. (A) Polyvinyl chloride (B) Polythene (C) Bakelite (D) Teflon

Description : __________ is a thermosetting plastic. (A) Polyvinyl chloride (B) Polythene (C) Bakelite (D) Teflon

Last Answer : (C) Bakelite

__________ is produced using Polycondensation reaction. (A) Polythene (B) Phenol formaldehyde (C) Poly vinyl chloride (D) None of these

Description : __________ is produced using Polycondensation reaction. (A) Polythene (B) Phenol formaldehyde (C) Poly vinyl chloride (D) None of these

Last Answer : (B) Phenol formaldehyde

Polycondensation reaction of polymerisation (A) Does not produce linear polymers (B) Produces only thermoplastic material (C) Produces epoxy polymers (D) Does not need any catalyst

Description : Polycondensation reaction of polymerisation (A) Does not produce linear polymers (B) Produces only thermoplastic material (C) Produces epoxy polymers (D) Does not need any catalyst

Last Answer : (C) Produces epoxy polymers

Bakelite is chemically known as (A) Polyvinyl chloride (PVC) (B) Polybutadiene (C) Phenol formaldehyde (D) Polyurethane

Description : Bakelite is chemically known as (A) Polyvinyl chloride (PVC) (B) Polybutadiene (C) Phenol formaldehyde (D) Polyurethane

Last Answer : (C) Phenol formaldehyde

Poly Vinyl chloride (PVC) is a __________ material. (A) Thermoplastic (B) Thermosetting (C) Fibrous (D) Chemically active

Description : Poly Vinyl chloride (PVC) is a __________ material. (A) Thermoplastic (B) Thermosetting (C) Fibrous (D) Chemically active

Last Answer : (A) Thermoplastic

The term PVC used in the plastic industry stands for - (1) polyvinyl chloride (2) polyvinyl carbonate (3) phosphor vanadium chloride (4) phosphavinyl chloride

Description : The term PVC used in the plastic industry stands for - (1) polyvinyl chloride (2) polyvinyl carbonate (3) phosphor vanadium chloride (4) phosphavinyl chloride

Last Answer : (1) polyvinyl chloride Explanation: Polyvinyl chloride is the world's third-most widely produced synthetic plastic polymer, after polyethylene and polypropylene. About 40 million tones are produced per year.

The term PVC used in the plastic industry stands for-------? A. Phosphavinyl chloride B. Phosphor vanadiu chloride C. Polyvinyl chloride (Answer) D. Polyvinyl carbobate

Description : The term PVC used in the plastic industry stands for-------? A. Phosphavinyl chloride B. Phosphor vanadiu chloride C. Polyvinyl chloride (Answer) D. Polyvinyl carbobate

Last Answer : C. Polyvinyl chloride (Answer)

PVC stands for (a) polyvinyl chloride (b) post varnish conductor (c) pressed and varnished cloth (d) positive voltage conductor (e) none of the above

Description : PVC stands for (a) polyvinyl chloride (b) post varnish conductor (c) pressed and varnished cloth (d) positive voltage conductor (e) none of the above

Last Answer : (a) polyvinyl chloride

Vinyl chloride (CH2 = CH.Cl) is produced by the thermal pyrolysis of ethylene dichloride at a pressure & temperature of (A) 4 kgf/cm2 & 500°C (B) 10 kgf/cm2 & 1000°C (C) 40 kg/cm2 & 200°C (D) 100 kgf/cm2 & 500°C

Description : Vinyl chloride (CH2 = CH.Cl) is produced by the thermal pyrolysis of ethylene dichloride at a pressure & temperature of (A) 4 kgf/cm2 & 500°C (B) 10 kgf/cm2 & 1000°C (C) 40 kg/cm2 & 200°C (D) 100 kgf/cm2 & 500°C

Last Answer : (A) 4 kgf/cm2 & 500°C

Molecular weight of a polymer is equal to the molecular weight of the repeat unit multiplied by the degree of polymerisation. What is the molecular weight of poly vinyl chloride (PVC), if its degree of polymerisation is 800? (A) 50000 (B) 51600 (C) 49200 (D) 50800

Description : Molecular weight of a polymer is equal to the molecular weight of the repeat unit multiplied by the degree of polymerisation. What is the molecular weight of poly vinyl chloride (PVC), if its degree of polymerisation is 800? (A) 50000 (B) 51600 (C) 49200 (D) 50800

Last Answer : (A) 50000

Polymethyl methacrylate (PMMA) which is also known as Perspex and is produced by bulk polymerisation of methyl methacrylate is not a __________ polymer. (A) Thermoplastic (B) Thermosetting (C) Linear (D) Glass like transparent

Description : Polymethyl methacrylate (PMMA) which is also known as Perspex and is produced by bulk polymerisation of methyl methacrylate is not a __________ polymer. (A) Thermoplastic (B) Thermosetting (C) Linear (D) Glass like transparent

Last Answer : (B) Thermosetting

SBR is produced by the copolymerisation of butadiene & styrene by employing emulsion polymerisation. The weight ratio of styrene and butadiene is maintained at (A) 1: 3 (B) 3 : 1 (C) 1 : 2 (D) 2 : 1

Description : SBR is produced by the copolymerisation of butadiene & styrene by employing emulsion polymerisation. The weight ratio of styrene and butadiene is maintained at (A) 1: 3 (B) 3 : 1 (C) 1 : 2 (D) 2 : 1

Last Answer : (A) 1: 3

PVC is obtained by the polymerisation of – (1) Propane (2) Vinyl chloride (3) Styrene (4) Acetylene

Description : PVC is obtained by the polymerisation of – (1) Propane (2) Vinyl chloride (3) Styrene (4) Acetylene

Last Answer : (2) Vinyl chloride Explanation: Polyvinyl chloride is produced by polymerization of the monomer vinyl chloride (17CM). Polyvinyl chloride, commonly abbreviated PVC, is the third-most widely produced ... it is cheaper and stronger than more traditional alternatives such as copper or ductile iron.

PVC is obtained by the polymerisation of (1) Propane (2) Vinyl chloride (3) Styrene (4) Acetylene

Description : PVC is obtained by the polymerisation of (1) Propane (2) Vinyl chloride (3) Styrene (4) Acetylene

Last Answer : Vinyl chloride

Alkyd resin e.g., glyptal resin formed by Phthalic anhydride and glycerine is not used (A) For surface coating of automobiles & air crafts (B) For fibre making (C) As plasticiser for PVC & nitrocellulose (D) For film forming materials

Description : Alkyd resin e.g., glyptal resin formed by Phthalic anhydride and glycerine is not used (A) For surface coating of automobiles & air crafts (B) For fibre making (C) As plasticiser for PVC & nitrocellulose (D) For film forming materials

Last Answer : (B) For fibre making

Linear polymers are normally (A) Thermosetting (B) Thermoplastic (C) Elastometric (D) Having extremely high softening poin

Description : Linear polymers are normally (A) Thermosetting (B) Thermoplastic (C) Elastometric (D) Having extremely high softening poin

Last Answer : (B) Thermoplastic

The major constituent of laminate of safety glass, which holds the broken glass, pieces in their places during accident (and thus minimises the danger from flying glass fragments) is(A) Polyvinyl alcohol(B) Polyvinyl acetate(C) Polyvinyl butyral(D) PVC

Description : The major constituent of laminate of safety glass, which holds the broken glass, pieces in their places during accident (and thus minimises the danger from flying glass fragments) is (A) Polyvinyl alcohol (B) Polyvinyl acetate (C) Polyvinyl butyral (D) PVC

Last Answer : (C) Polyvinyl butyral

Vinyl flooring is done using __________ sheets. (A) Polypropylene (B) PVC (C) Polythene (D) Polyvinyl acetate

Description : Vinyl flooring is done using __________ sheets. (A) Polypropylene (B) PVC (C) Polythene (D) Polyvinyl acetate

Last Answer : (B) PVC

In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament form. Dry spinning is used for __________ fibres. (A) Polythene (B) PVC (C) Rayon (D) Polyvinyl acetate

Description : In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament ... is used for __________ fibres. (A) Polythene (B) PVC (C) Rayon (D) Polyvinyl acetate

Last Answer : (B) PVC

Differentiate between thermosetting and thermo-softening plastics.

Description : Differentiate between thermosetting and thermo-softening plastics. 

Last Answer : Thermosetting Thermo-softening 1. The plastics who possess three dimensional complicated structure with cross linkages are called as thermo setting plastics 1. The plastics who possess ... , Urea formaldehyde, Silicon plastic 11. Examples- Polythene, Polystyrene, PVC, Teflon 

Which of the following is produced when polyvinyl chloride is burned? w) Hydrogen Cyanide x) Hydrogen Chloride y) Nitrogen Oxide z) Oxygen

Description : Which of the following is produced when polyvinyl chloride is burned? w) Hydrogen Cyanide x) Hydrogen Chloride y) Nitrogen Oxide z) Oxygen

Last Answer : ANSWER: X -- HYDROGEN CHLORIDE 

Polymers are classified into four categories namely thermosetting, thermoplastic, elastomer and fibre depending upon their (A) Molecular sizes (B) Magnitude of intermolecular forces (C) Resistance to heat (D) Polymerisation mechanism

Description : Polymers are classified into four categories namely thermosetting, thermoplastic, elastomer and fibre depending upon their (A) Molecular sizes (B) Magnitude of intermolecular forces (C) Resistance to heat (D) Polymerisation mechanism

Last Answer : (B) Magnitude of intermolecular forces

Dacron is a (A) Condensation polymerisation product of Hexamethylene diamine and adipic acid (B) Condensation polymerisation product of dimethyl terephthalate (DMT) and ethylene glycol (C) Thermosetting material (D) None of these

Description : Dacron is a (A) Condensation polymerisation product of Hexamethylene diamine and adipic acid (B) Condensation polymerisation product of dimethyl terephthalate (DMT) and ethylene glycol (C) Thermosetting material (D) None of these

Last Answer : (D) None of these

Thermosetting resins/polymers as compared to thermoplastic ones are (A) Soluble in all organic solvents (B) More brittle (C) Formed by addition polymerisation only (D) Easily reshaped & reused

Description : Thermosetting resins/polymers as compared to thermoplastic ones are (A) Soluble in all organic solvents (B) More brittle (C) Formed by addition polymerisation only (D) Easily reshaped & reused

Last Answer : (B) More brittle

Thermosetting polymers as compared to thermoplastic polymers (A) Are formed by addition polymerisation (B) Have three dimensional structure (C) Have linear structure (D) None of these

Description : Thermosetting polymers as compared to thermoplastic polymers (A) Are formed by addition polymerisation (B) Have three dimensional structure (C) Have linear structure (D) None of these

Last Answer : (B) Have three dimensional structure

Polythene is a/an (A) Addition polymerisation product (B) Condensation polymerisation product (C) Thermosetting material (D) None of these

Description : Polythene is a/an (A) Addition polymerisation product (B) Condensation polymerisation product (C) Thermosetting material (D) None of these

Last Answer : (A) Addition polymerisation product

Polythene is a/an __________ polymerisation product. (A) Addition (B) Condensation (C) Thermosetting (D) None of these

Description : Polythene is a/an __________ polymerisation product. (A) Addition (B) Condensation (C) Thermosetting (D) None of these

Last Answer : (A) Addition

__________ is a thermosetting plastic. (A) PVC (B) Polythene (C) Bakelite (D) Polystyrene

Description : __________ is a thermosetting plastic. (A) PVC (B) Polythene (C) Bakelite (D) Polystyrene

Last Answer : (C) Bakelite

Write one application for the give dielectric material. (i) Polyvinyl Carbide(PVC) (ii) Glass (iii) Mica (iv) Cotton and Silk

Description : Write one application for the give dielectric material. (i) Polyvinyl Carbide(PVC) (ii) Glass (iii) Mica (iv) Cotton and Silk

Last Answer : (i) Polyvinyl Carbide(PVC):it is used in insulation of wires and cables in domestic wiring as well as in aircraft and factory wiring (any one)  (ii) Glass: 1) Alkaline glasses are used for ... with wax or varnishes are used in windings of magnet coils and small medium sized mechanics (any one) 

Which of the following is produced by condensation polymerisation? (A) Bakelite (B) Polythene (C) Poly vinyl chloride (D) Polystyrene

Description : Which of the following is produced by condensation polymerisation? (A) Bakelite (B) Polythene (C) Poly vinyl chloride (D) Polystyrene

Last Answer : (A) Bakelite

Milk is fat dispersed in water. It is an example of (A) Suspension (B) Emulsion (C) Gel (D) Solution

Description : Milk is fat dispersed in water. It is an example of (A) Suspension (B) Emulsion (C) Gel (D) Solution

Last Answer : (B) Emulsion

In step growth polymerisation, condensation occurs in a stepwise manner with or without the elimination of smaller molecules. An example of step growth polymerisation product is (A) Terylene (B) Polybutadiene (C) PVC (D) Polypropylene

Description : In step growth polymerisation, condensation occurs in a stepwise manner with or without the elimination of smaller molecules. An example of step growth polymerisation product is (A) Terylene (B) Polybutadiene (C) PVC (D) Polypropylene

Last Answer : (A) Terylene

The purpose of adding Na2CO3 to water of low alkalinity is to (A) Permit the use of alum as a coagulant (B) Increase the softening capacity of zeolite (C) Facilitate easy regeneration of zeolite (D) All (A), (B) and (C)

Description : The purpose of adding Na2CO3 to water of low alkalinity is to (A) Permit the use of alum as a coagulant (B) Increase the softening capacity of zeolite (C) Facilitate easy regeneration of zeolite (D) All (A), (B) and (C)

Last Answer : (A) Permit the use of alum as a coagulant

Polyesters are manufactured by the Polycondensation reaction of (A) Dibasic acid with dihydric alcohol (B) A single monomer (C) Carboxylic acid with ethylene

Description : Polyesters are manufactured by the Polycondensation reaction of (A) Dibasic acid with dihydric alcohol (B) A single monomer (C) Carboxylic acid with ethylene

Last Answer : (A) Dibasic acid with dihydric alcohol

Is suspension and emulsion the same ?

Description : Is suspension and emulsion the same ?

Last Answer : Suspension is a mixture of solid and liquid. Emulsion, on the other hand, is a mixture of liquids of the same nature. For example, antacids or a mixture of Mg (OH) 2 in water is a suspension and emulsion is a mixture that is obtained by stirring oil in a water bottle.

Milk is - (1) Emulsion (2) Suspension (3) Foam (4) Gel

Description : Milk is - (1) Emulsion (2) Suspension (3) Foam (4) Gel

Last Answer : (1) Emulsion Explanation: An emulsion is a mixture of two liquids that cannot combine into a solution. In the case of milk, butterfat globules are suspended in a water-based fluid. The globules are encased in membranes that prevent them from combining into giant lumps of butterfat.

Milk is an example of - (1) suspension (2) true solution (3) emulsion (4) gel

Description : Milk is an example of - (1) suspension (2) true solution (3) emulsion (4) gel

Last Answer : (3) emulsion Explanation: Milk is an example of the oil-inwater type of emulsion. In milk liquid fat globules are dispersed in water. Other examples are, vanishing cream etc.

Milk is a natural – (1) Solution (2) Emulsion (3) Mixture (4) Suspension

Description : Milk is a natural – (1) Solution (2) Emulsion (3) Mixture (4) Suspension

Last Answer : (2) Emulsion Explanation: An emulsion is a mixture of two or more liquids that are normally immiscible (nonmixable or unblendable). Emulsions are part of a more general class of two-phase systems of ... an emulsion, one liquid (the dispersed phase) is dispersed in the other (the continuous phase).

A mixture of benzene and toluene forms (1) Non-ideal solution (2) Ideal solution (3) Emulsion (4) Suspension

Description : A mixture of benzene and toluene forms (1) Non-ideal solution (2) Ideal solution (3) Emulsion (4) Suspension

Last Answer : (2) Ideal solution Explanation: A mixture of benzene and toluene (60 mole% toluene) enters a distillation column to be separated into two product streams.

Bitumen emulsion is (A) A liquid containing bitumen in suspension (B) A paint (C) Used as anti-corrosive paint (D) All the above

Description : Bitumen emulsion is (A) A liquid containing bitumen in suspension (B) A paint (C) Used as anti-corrosive paint (D) All the above

Last Answer : Answer: Option D

Milk is (1) Emulsion (2) Suspension (3) Foam (4) Gel

Description : Milk is (1) Emulsion (2) Suspension (3) Foam (4) Gel 

Last Answer : Emulsion