Vinyl flooring is done using __________ sheets. (A) Polypropylene (B) PVC (C) Polythene (D) Polyvinyl acetate

Vinyl flooring is done using __________ sheets.
(A) Polypropylene
(B) PVC
(C) Polythene
(D) Polyvinyl acetate
by

1 Answer

Answer :

(B) PVC
by

Related questions

In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament form. Dry spinning is used for __________ fibres. (A) Polythene (B) PVC (C) Rayon (D) Polyvinyl acetate

Description : In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament ... is used for __________ fibres. (A) Polythene (B) PVC (C) Rayon (D) Polyvinyl acetate

Last Answer : (B) PVC

Benzoyl chloride is not used as a catalyst in the manufacture of (A) Polystyrene (B) Polyvinyl acetate (C) Polypropylene (D) Polyvinyl chloride-co-vinyl acetate

Description : Benzoyl chloride is not used as a catalyst in the manufacture of (A) Polystyrene (B) Polyvinyl acetate (C) Polypropylene (D) Polyvinyl chloride-co-vinyl acetate

Last Answer : (C) Polypropylene

Hot drink (e.g., tea) cups are usually made of (A) Polystyrene (B) Polythene (C) Polypropylene (D) PVC

Description : Hot drink (e.g., tea) cups are usually made of (A) Polystyrene (B) Polythene (C) Polypropylene (D) PVC

Last Answer : (A) Polystyrene

Liners of bags are usually made of (A) Polythene (B) PVC (C) Polypropylene (D) Polyesters

Description : Liners of bags are usually made of (A) Polythene (B) PVC (C) Polypropylene (D) Polyesters

Last Answer : (C) Polypropylene

The major constituent of laminate of safety glass, which holds the broken glass, pieces in their places during accident (and thus minimises the danger from flying glass fragments) is(A) Polyvinyl alcohol(B) Polyvinyl acetate(C) Polyvinyl butyral(D) PVC

Description : The major constituent of laminate of safety glass, which holds the broken glass, pieces in their places during accident (and thus minimises the danger from flying glass fragments) is (A) Polyvinyl alcohol (B) Polyvinyl acetate (C) Polyvinyl butyral (D) PVC

Last Answer : (C) Polyvinyl butyral

Automobile steering wheels are normally made of (A) Cellulose acetate(B) Cellulose nitrate(C) PVC(D) High density polythene

Description : Automobile steering wheels are normally made of (A) Cellulose acetate (B) Cellulose nitrate (C) PVC (D) High density polythene

Last Answer : (A) Cellulose acetate

PVC stands for (A) Plastic very compact (B) Polythene vinyl chloride (C) Polythene vinyl carbon (D) Polythene vanadium carbide

Description : PVC stands for (A) Plastic very compact (B) Polythene vinyl chloride (C) Polythene vinyl carbon (D) Polythene vanadium carbide

Last Answer : Answer: Option B

__________ is a thermosetting plastic. (A) Polyvinyl chloride (B) Polythene (C) Bakelite (D) Teflon

Description : __________ is a thermosetting plastic. (A) Polyvinyl chloride (B) Polythene (C) Bakelite (D) Teflon

Last Answer : (C) Bakelite

__________ is a copolymer. (A) Nylon-66 (B) Polypropylene (C) PVC

Description : __________ is a copolymer. (A) Nylon-66 (B) Polypropylene (C) PVC

Last Answer : (A) Nylon-66

In case of wet spinning of polymers, the polymer solution is forced through spinnerates into, a coagulating bath to give a filament form. Wet spinning is not used in case of the __________ fibres. (A) Viscose rayon (B) Acrylic (C) Polyvinyl acetate (D) Saturated polyeste

Description : In case of wet spinning of polymers, the polymer solution is forced through spinnerates into, a coagulating bath to give a filament form. Wet spinning is not used in case of the __________ fibres. (A) Viscose rayon (B) Acrylic (C) Polyvinyl acetate (D) Saturated polyeste

Last Answer : (D) Saturated polyeste

__________ is produced using Polycondensation reaction. (A) Polythene (B) Phenol formaldehyde (C) Poly vinyl chloride (D) None of these

Description : __________ is produced using Polycondensation reaction. (A) Polythene (B) Phenol formaldehyde (C) Poly vinyl chloride (D) None of these

Last Answer : (B) Phenol formaldehyde

Polypropylene is preferred to polythene, because the former is (A) Non-inflammable (B) Harder (C) Stronger (D) Both (B) & (C)

Description : Polypropylene is preferred to polythene, because the former is (A) Non-inflammable (B) Harder (C) Stronger (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C

Polypropylene compared to polythene is (A) Harder (B) Stronger (C) Lighter (D) All (A), (B) and (C)

Description : Polypropylene compared to polythene is (A) Harder (B) Stronger (C) Lighter (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

__________ is a thermosetting plastic. (A) PVC (B) Polythene (C) Bakelite (D) Polystyrene

Description : __________ is a thermosetting plastic. (A) PVC (B) Polythene (C) Bakelite (D) Polystyrene

Last Answer : (C) Bakelite

__________ tubes are good substitute for human blood vessels on heart by-pass operation. (A) PVC (B) Polythene (C) Teflon/Dacron (D) Polystyrene

Description : __________ tubes are good substitute for human blood vessels on heart by-pass operation. (A) PVC (B) Polythene (C) Teflon/Dacron (D) Polystyrene

Last Answer : (C) Teflon/Dacron

In step growth polymerisation, condensation occurs in a stepwise manner with or without the elimination of smaller molecules. An example of step growth polymerisation product is (A) Terylene (B) Polybutadiene (C) PVC (D) Polypropylene

Description : In step growth polymerisation, condensation occurs in a stepwise manner with or without the elimination of smaller molecules. An example of step growth polymerisation product is (A) Terylene (B) Polybutadiene (C) PVC (D) Polypropylene

Last Answer : (A) Terylene

Polyvinyl chloride (PVC) (A) Is produced by Polycondensation reaction (B) Uses either emulsion or suspension polymerisation methods (C) Can be made thermosetting by adding a plasticiser (D) Softening temperature is 200°C

Description : Polyvinyl chloride (PVC) (A) Is produced by Polycondensation reaction (B) Uses either emulsion or suspension polymerisation methods (C) Can be made thermosetting by adding a plasticiser (D) Softening temperature is 200°C

Last Answer : (B) Uses either emulsion or suspension polymerisation methods

. Polyvinyl chloride (PVC) is (A) A thermosetting material (B) A condensation polymerisation product (C) Made by employing emulsion polymerisation (D) None of these

Description : . Polyvinyl chloride (PVC) is (A) A thermosetting material (B) A condensation polymerisation product (C) Made by employing emulsion polymerisation (D) None of these

Last Answer : (C) Made by employing emulsion polymerisation

Reactor used in the production of polyvinyl chloride (PVC) is made of (A) Nickel or glass lined steel (B) Aluminium (C) Tantalum (D) Lead

Description : Reactor used in the production of polyvinyl chloride (PVC) is made of (A) Nickel or glass lined steel (B) Aluminium (C) Tantalum (D) Lead

Last Answer : (A) Nickel or glass lined steel

Bakelite is chemically known as (A) Polyvinyl chloride (PVC) (B) Polybutadiene (C) Phenol formaldehyde (D) Polyurethane

Description : Bakelite is chemically known as (A) Polyvinyl chloride (PVC) (B) Polybutadiene (C) Phenol formaldehyde (D) Polyurethane

Last Answer : (C) Phenol formaldehyde

. Polyvinyl chloride (PVC) is (A) A thermosetting material (B) A condensation polymerisation product (C) Made by employing emulsion polymerisation (D) None of these

Description : . Polyvinyl chloride (PVC) is (A) A thermosetting material (B) A condensation polymerisation product (C) Made by employing emulsion polymerisation (D) None of these

Last Answer : (C) Made by employing emulsion polymerisation

Polyvinyl acetate is never used for making (A) Moulded articles (B) Fibres (C) Adhesives

Description : Polyvinyl acetate is never used for making (A) Moulded articles (B) Fibres (C) Adhesives

Last Answer : (A) Moulded articles

Which of the following is used to make light weight, but strong plastic? (1) Nylon (2) Polythene (3) Polyvinyl Chloride (4) Methyl Methacrylate

Description : Which of the following is used to make light weight, but strong plastic? (1) Nylon (2) Polythene (3) Polyvinyl Chloride (4) Methyl Methacrylate

Last Answer : (3) Polyvinyl Chloride Explanation: Polyvinyl chloride (PVC) is a common, strong but lightweight plastic that is used in making tough plastic. It is used for flexible applications such ... cables. It is the third-most widely produced synthetic plastic polymer, after polyethylene and polypropylene.

Arrange the following polymer in increasing order of their molecular forces : (a) nylon-6, 6, Buna-S, polythene. (b) nylon-6, Neoprene, polyvinyl chloride.

Description : Arrange the following polymer in increasing order of their molecular forces : (a) nylon-6, 6, Buna-S, polythene. (b) nylon-6, Neoprene, polyvinyl chloride.

Last Answer : Ans. (a) Buna S < Polythene < Nylon-6, 6. (b) Neoprene < Polyvinyl Chloride < Nylon-6.

Which of the following is used to make light weight, but strong plastic ? (1) Nylon (2) Polythene (3) Polyvinyl Chloride (4) Methyl Methacrylate

Description : Which of the following is used to make light weight, but strong plastic ? (1) Nylon (2) Polythene (3) Polyvinyl Chloride (4) Methyl Methacrylate

Last Answer : Polyvinyl Chloride

Why Should Curing Not Be Done By Ponding And Polythene Sheets?

Description : Why Should Curing Not Be Done By Ponding And Polythene Sheets?

Last Answer : Answer : The primary purpose of curing is to reduce the heat loss of concrete that is freshly placed to the atmosphere and in order to reduce the temperature gradient across the cross-section of ... be easily blown away by winds and also the water lost by self-desiccation cannot be replenished.

Identify the group in which all the polymers mentioned can be used to make fibres. (A) Butadiene copolymers, Polyamides, Urea-formaldehyde (B) Cellulose derivatives, Polyisoprene, Polyethylene (C) Cellulose derivatives, Polyamides, Polyurethane (D) Polypropylene, Poly vinyl chloride, Silicon

Description : Identify the group in which all the polymers mentioned can be used to make fibres. (A) Butadiene copolymers, Polyamides, Urea-formaldehyde (B) Cellulose derivatives, Polyisoprene, Polyethylene (C) Cellulose derivatives, Polyamides, Polyurethane (D) Polypropylene, Poly vinyl chloride, Silicon

Last Answer : (B) Cellulose derivatives, Polyisoprene, Polyethylene

What is the difference between polypropylene and PVC?

Description : What is the difference between polypropylene and PVC?

Last Answer : PVC is the most common plastic used in book covering materials, and has been used for many years. Polypropylene has become more common recently. Both of these plastics have different handling characteristics. PVC is ... plastic. PVC is known to have a low level of acidity. PVC is cheaper than PP.

Poly Vinyl chloride (PVC) is a __________ material. (A) Thermoplastic (B) Thermosetting (C) Fibrous (D) Chemically active

Description : Poly Vinyl chloride (PVC) is a __________ material. (A) Thermoplastic (B) Thermosetting (C) Fibrous (D) Chemically active

Last Answer : (A) Thermoplastic

__________ polymer is produced by the copolymerisation of vinyl chloride-vinyl acetate. (A) Fibrous (B) Leathery (C) Rubbery (D) Hard

Description : __________ polymer is produced by the copolymerisation of vinyl chloride-vinyl acetate. (A) Fibrous (B) Leathery (C) Rubbery (D) Hard

Last Answer : (B) Leathery

The term PVC used in the plastic industry stands for - (1) polyvinyl chloride (2) polyvinyl carbonate (3) phosphor vanadium chloride (4) phosphavinyl chloride

Description : The term PVC used in the plastic industry stands for - (1) polyvinyl chloride (2) polyvinyl carbonate (3) phosphor vanadium chloride (4) phosphavinyl chloride

Last Answer : (1) polyvinyl chloride Explanation: Polyvinyl chloride is the world's third-most widely produced synthetic plastic polymer, after polyethylene and polypropylene. About 40 million tones are produced per year.

The term PVC used in the plastic industry stands for-------? A. Phosphavinyl chloride B. Phosphor vanadiu chloride C. Polyvinyl chloride (Answer) D. Polyvinyl carbobate

Description : The term PVC used in the plastic industry stands for-------? A. Phosphavinyl chloride B. Phosphor vanadiu chloride C. Polyvinyl chloride (Answer) D. Polyvinyl carbobate

Last Answer : C. Polyvinyl chloride (Answer)

PVC stands for (a) polyvinyl chloride (b) post varnish conductor (c) pressed and varnished cloth (d) positive voltage conductor (e) none of the above

Description : PVC stands for (a) polyvinyl chloride (b) post varnish conductor (c) pressed and varnished cloth (d) positive voltage conductor (e) none of the above

Last Answer : (a) polyvinyl chloride

Write one application for the give dielectric material. (i) Polyvinyl Carbide(PVC) (ii) Glass (iii) Mica (iv) Cotton and Silk

Description : Write one application for the give dielectric material. (i) Polyvinyl Carbide(PVC) (ii) Glass (iii) Mica (iv) Cotton and Silk

Last Answer : (i) Polyvinyl Carbide(PVC):it is used in insulation of wires and cables in domestic wiring as well as in aircraft and factory wiring (any one)  (ii) Glass: 1) Alkaline glasses are used for ... with wax or varnishes are used in windings of magnet coils and small medium sized mechanics (any one) 

Pick up the non-inflammable plastic from the following: (A) Cellulose acetate plastics (B) Polyvinyl chloride plastics (C) Phenol formaldehyde plastic (D) Urea formaldehyde plastic

Description : Pick up the non-inflammable plastic from the following: (A) Cellulose acetate plastics (B) Polyvinyl chloride plastics (C) Phenol formaldehyde plastic (D) Urea formaldehyde plastic

Last Answer : Answer: Option B

Which of the following is a copolymer? (A) PVC (B) Bakelite (C) Polythene (D) Teflon

Description : Which of the following is a copolymer? (A) PVC (B) Bakelite (C) Polythene (D) Teflon

Last Answer : (B) Bakelite

Which of the following is not a thermoplastic material? (A) Epoxy polymer (B) PVC (C) Polystyrene (D) Polythene

Description : Which of the following is not a thermoplastic material? (A) Epoxy polymer (B) PVC (C) Polystyrene (D) Polythene

Last Answer : (A) Epoxy polymer

Cellulose acetate has very high film permeability among all the polymers of the order of 5000 gm/100 m2 . Which of the following polymers has the maximum film elongation (of the order of 100%)? (A) Water impermeable cellophane(B) Polythene(C) Cellulose acetate(D) Teflon

Description : Cellulose acetate has very high film permeability among all the polymers of the order of 5000 gm/100 m2 . Which of the following polymers has the maximum film elongation (of the order of 100%)? (A) Water impermeable cellophane (B) Polythene (C) Cellulose acetate (D) Teflon

Last Answer : (B) Polythene

Addition polymerisation is not involved in the manufacture of (A) Low density polythene (B) Poly vinyl chloride (C) Polystyrene (D) Polyhexamethylene adipamide

Description : Addition polymerisation is not involved in the manufacture of (A) Low density polythene (B) Poly vinyl chloride (C) Polystyrene (D) Polyhexamethylene adipamide

Last Answer : (D) Polyhexamethylene adipamide

Which of the following is produced by condensation polymerisation? (A) Bakelite (B) Polythene (C) Poly vinyl chloride (D) Polystyrene

Description : Which of the following is produced by condensation polymerisation? (A) Bakelite (B) Polythene (C) Poly vinyl chloride (D) Polystyrene

Last Answer : (A) Bakelite

Arrange the following Polymers in increasing order of inter molecular forces. (a) Nylon 66, Buna-S and Polythene (b) Nylon 6, Neoprene and PVC

Description : Arrange the following Polymers in increasing order of inter molecular forces. (a) Nylon 66, Buna-S and Polythene (b) Nylon 6, Neoprene and PVC

Last Answer : Ans: (a) Buna-S, Polythene and Nylon 66.  (b) Neoprene, PVC and Nylon 6.

Molecular weight of a polymer is equal to the molecular weight of the repeat unit multiplied by the degree of polymerisation. What is the molecular weight of poly vinyl chloride (PVC), if its degree of polymerisation is 800? (A) 50000 (B) 51600 (C) 49200 (D) 50800

Description : Molecular weight of a polymer is equal to the molecular weight of the repeat unit multiplied by the degree of polymerisation. What is the molecular weight of poly vinyl chloride (PVC), if its degree of polymerisation is 800? (A) 50000 (B) 51600 (C) 49200 (D) 50800

Last Answer : (A) 50000

The monomer of poly vinyl chloride (PVC) is (A) Chloroethane (B) Ethylene dichloride (C) Ethyl chloride (D) Chloroform

Description : The monomer of poly vinyl chloride (PVC) is (A) Chloroethane (B) Ethylene dichloride (C) Ethyl chloride (D) Chloroform

Last Answer : (A) Chloroethane

Zeigler - Natta catalyst (AlR3 - AlCl3 ) is used in the polymerisation of (A) Vinyl acetate (B) Vinyl chloride (C) Propylene (D) Styrene

Description : Zeigler - Natta catalyst (AlR3 - AlCl3 ) is used in the polymerisation of (A) Vinyl acetate (B) Vinyl chloride (C) Propylene (D) Styrene

Last Answer : (C) Propylene

What are the disadvantages of curing by ponding and polythene sheets?

Description : What are the disadvantages of curing by ponding and polythene sheets?

Last Answer : The purpose of curing is to reduce the rate of heat loss of freshly placed concrete to the atmosphere and to minimize the temperature gradient across concrete cross ... would be affected. Moreover, for water lost due to self­desiccation, this method cannot replenish these losses.

Vinyl & PVC Fence Installation?

Description : Vinyl & PVC Fence Installation?

Last Answer : form_title=Vinyl & PVC Fence Installation form_header=12043 Please specify the nature of the project.*= () Replace existing fence () Repair existing fence () Install a new fence () Other How tall is the fence ... = {Select One,Less than 100 feet,100 - 200 feet,201 - 300 feet,Over 300 feet,Unsure}

PVC is formed by polymerization of - (1) Styrene (2) Acetylene (3) Propene (4) Vinyl Chloride

Description : PVC is formed by polymerization of - (1) Styrene (2) Acetylene (3) Propene (4) Vinyl Chloride

Last Answer : (4) Vinyl Chloride Explanation: Polyvinyl chloride is produced by polymerization of the vinyl chloride monomer (VCM). About 80% of production involves suspension polymerization.

PVC is obtained by the polymerisation of – (1) Propane (2) Vinyl chloride (3) Styrene (4) Acetylene

Description : PVC is obtained by the polymerisation of – (1) Propane (2) Vinyl chloride (3) Styrene (4) Acetylene

Last Answer : (2) Vinyl chloride Explanation: Polyvinyl chloride is produced by polymerization of the monomer vinyl chloride (17CM). Polyvinyl chloride, commonly abbreviated PVC, is the third-most widely produced ... it is cheaper and stronger than more traditional alternatives such as copper or ductile iron.

PVC is obtained by the polymerisation of (1) Propane (2) Vinyl chloride (3) Styrene (4) Acetylene

Description : PVC is obtained by the polymerisation of (1) Propane (2) Vinyl chloride (3) Styrene (4) Acetylene

Last Answer : Vinyl chloride