Highest theoretical frequency that can be processed at a sampling rate without aliasing. A. Folding frequency B. Resonant frequency C. Natural frequency D. Critical frequency

Highest theoretical frequency that can be processed at a sampling rate without aliasing.
A. Folding frequency
B. Resonant frequency
C. Natural frequency
D. Critical frequency
by

1 Answer

Answer :

A. Folding frequency
by

Related questions

ECE Board Exam March 1996 According to the Nyquist theorem, the sampling rate that can be used in a PCM system is ________ the highest audio frequency. A. once B. eight times C. twice D. thrice

Description : ECE Board Exam March 1996 According to the Nyquist theorem, the sampling rate that can be used in a PCM system is ________ the highest audio frequency. A. once B. eight times C. twice D. thrice

Last Answer : C. twice

Prior to sampling an anti-aliasing filter is used.

Description : Prior to sampling an anti-aliasing filter is used.

Last Answer : Prior to sampling an anti-aliasing filter is used. It is used to attenuate the high frequency component of the Signal 

Increasing the resonant frequency of an end-fed Marconi antenna can be done by A. adding a capacitor in series and reducing the physical length B. adding an inductor in series C. adding an inductor in series D. All of these

Description : Increasing the resonant frequency of an end-fed Marconi antenna can be done by A. adding a capacitor in series and reducing the physical length B. adding an inductor in series C. adding an inductor in series D. All of these

Last Answer : A. adding a capacitor in series and reducing the physical length

The effect of adding parasitic elements of a Hertz dipole is to A. make the antenna more omnidirectional B. reduce its resonant frequency C. increase the antenna’s power gain D. All of these

Description : The effect of adding parasitic elements of a Hertz dipole is to A. make the antenna more omnidirectional B. reduce its resonant frequency C. increase the antenna’s power gain D. All of these

Last Answer : C. increase the antenna’s power gain

When a capacitor is connected in series with a Marconi antenna? A. Antenna open circuit stops transmission B. An inductor of equal value must be added C. No change occurs to antenna D. Antenna resonant frequency increases

Description : When a capacitor is connected in series with a Marconi antenna? A. Antenna open circuit stops transmission B. An inductor of equal value must be added C. No change occurs to antenna D. Antenna resonant frequency increases

Last Answer : D. Antenna resonant frequency increases

What is the effect of adding a capacitor in series with an antenna? A. The antenna’s resonant frequency will increase B. The antenna’s resonant frequency will decrease C. The antenna will be physically 5% longer than its electrical length D. A capacitor is never added in series with an antenna

Description : What is the effect of adding a capacitor in series with an antenna? A. The antenna’s resonant frequency will increase B. The antenna’s resonant frequency will decrease C. The antenna will be physically 5% longer than its electrical length D. A capacitor is never added in series with an antenna

Last Answer : A. The antenna’s resonant frequency will increase

If the length of an antenna is changed from 2.5 meters to 2.8 meters, its resonant frequency will A. increase B. depend on the velocity factor so the resonant frequency can either be increased or decreased C. will be unchanged D. decrease

Description : If the length of an antenna is changed from 2.5 meters to 2.8 meters, its resonant frequency will A. increase B. depend on the velocity factor so the resonant frequency can either be increased or decreased C. will be unchanged D. decrease

Last Answer : D. decrease

If the length of a Hertz dipole is decreased A. its resonant frequency will be lowered its distributed inductance will be increased B. its distributed inductance will be decreased C. its resonant frequency will be increased D. its distributed capacitance between the antenna and ground will be increased.

Description : If the length of a Hertz dipole is decreased A. its resonant frequency will be lowered its distributed inductance will be increased B. its distributed inductance will be decreased C. its ... frequency will be increased D. its distributed capacitance between the antenna and ground will be increased.

Last Answer : C. its resonant frequency will be increased

How is it possible to lower the resonant frequency of Hertz dipole antenna? A. By reducing the frequency at the transmitter B. By connecting a capacitor in series with the antenna C. By the connecting a resistor in series with the antenna D. By connecting an inductor in series with the antenna

Description : How is it possible to lower the resonant frequency of Hertz dipole antenna? A. By reducing the frequency at the transmitter B. By connecting a capacitor in series with the antenna C. By the connecting a resistor in series with the antenna D. By connecting an inductor in series with the antenna

Last Answer : D. By connecting an inductor in series with the antenna

Determine the lower half-power frequency of a class-C amplifier having upper half-power frequency of 10.025 MHz, a resonant frequency 5 MHz and a circuit Q of 10. A. 1.0025 MHz B. 10.525 MHz C. 0.5 MHz D. 10 MHz

Description : Determine the lower half-power frequency of a class-C amplifier having upper half-power frequency of 10.025 MHz, a resonant frequency 5 MHz and a circuit Q of 10. A. 1.0025 MHz B. 10.525 MHz C. 0.5 MHz D. 10 MHz

Last Answer : A. 1.0025 MHz

Transmission lines when connected to antenna have A. capacitive load B. resistive load whose resistance is less than characteristics impedance C. resistive load at the resonant frequency D. resistive load whose resistance is greater than the characteristic impedance of the line

Description : Transmission lines when connected to antenna have A. capacitive load B. resistive load whose resistance is less than characteristics impedance C. resistive load at the resonant frequency D. resistive load whose resistance is greater than the characteristic impedance of the line

Last Answer : C. resistive load at the resonant frequency

What is the highest frequency that can be sent straight upward and be returned to earth? A. MUF B. Gyro frequency C. Skip frequency D. Critical frequency

Description : What is the highest frequency that can be sent straight upward and be returned to earth? A. MUF B. Gyro frequency C. Skip frequency D. Critical frequency

Last Answer : D. Critical frequency

Highest frequency that can be used for skywave HF communications between two given points on earth. A. Gyro frequency B. Maximum usable frequency C. Critical frequency D. Virtual frequency

Description : Highest frequency that can be used for skywave HF communications between two given points on earth. A. Gyro frequency B. Maximum usable frequency C. Critical frequency D. Virtual frequency

Last Answer : B. Maximum usable frequency

What is the difference between phase and frequency modulation? A. Is purely theoretical because they are the same in practice B. Lies in poorer audio response of phase modulation C. Lies in the different definitions of the modulation index D. Is too great to make two systems compatible

Description : What is the difference between phase and frequency modulation? A. Is purely theoretical because they are the same in practice B. Lies in poorer audio response of phase modulation C. Lies in the different definitions of the modulation index D. Is too great to make two systems compatible

Last Answer : C. Lies in the different definitions of the modulation index

What is the maximum theoretical data rate of the above problem if one transponder is used for binary transmission? A. 36 Mbps B. 72 Mbps C.18 Mbps D. 144 Mbps

Description : What is the maximum theoretical data rate of the above problem if one transponder is used for binary transmission? A. 36 Mbps B. 72 Mbps C.18 Mbps D. 144 Mbps

Last Answer : B. 72 Mbps

Is the total useful information processed or communicated over a specific amount of time A. Baud rate B. Bit rate C. Information theory D. Throughput

Description : Is the total useful information processed or communicated over a specific amount of time A. Baud rate B. Bit rate C. Information theory D. Throughput

Last Answer : D. Throughput

The result whenever the sampling rate is less than twice the highest audio frequency.

Description : The result whenever the sampling rate is less than twice the highest audio frequency.

Last Answer : alias

12 voice channels are sampled at 8000 sampling rate and encoded into 8 bit PCM word. Determine the rate of the data stream. a. 354 kbps b. 750 kbps c. 768 kbps d. 640 kbps

Description : 12 voice channels are sampled at 8000 sampling rate and encoded into 8 bit PCM word. Determine the rate of the data stream. a. 354 kbps b. 750 kbps c. 768 kbps d. 640 kbps

Last Answer : c. 768 kbps

What is the advantage of PTM over PAM? A. All of these B. Low sampling rate is required C. Much better noise immunity D. Simpler to generate

Description : What is the advantage of PTM over PAM? A. All of these B. Low sampling rate is required C. Much better noise immunity D. Simpler to generate

Last Answer : C. Much better noise immunity

Which antenna is not properly terminated? A. Resonant B. Non-resonant C. Isotropic D. Whip

Description : Which antenna is not properly terminated? A. Resonant B. Non-resonant C. Isotropic D. Whip

Last Answer : A. Resonant

Which is a non-resonant antenna? A. Rhombic antenna B. Folded dipole C. End-fire array D. Yagi-Uda antenna

Description : Which is a non-resonant antenna? A. Rhombic antenna B. Folded dipole C. End-fire array D. Yagi-Uda antenna

Last Answer : A. Rhombic antenna

What do you call a transmission line used specifically for the purpose of achieving delay? A. Delay line B. Flat line C. Resonant line D. Non-resonant line

Description : What do you call a transmission line used specifically for the purpose of achieving delay? A. Delay line B. Flat line C. Resonant line D. Non-resonant line

Last Answer : A. Delay line

Antenna which is not properly terminated A. Isotropic B. Non-resonant C. Whip D. Resonant

Description : Antenna which is not properly terminated A. Isotropic B. Non-resonant C. Whip D. Resonant

Last Answer : D. Resonant

Where do the maximum current and minimum voltage values on a resonant Hertz dipole exist? A. Center of the antenna B. Near the end of the antenna C. Near the center of the antenna D. Ends of the antenna

Description : Where do the maximum current and minimum voltage values on a resonant Hertz dipole exist? A. Center of the antenna B. Near the end of the antenna C. Near the center of the antenna D. Ends of the antenna

Last Answer : A. Center of the antenna

Which is the non-resonant antenna? A. Broadside Antenna B. Folded Dipole C. Rhombic antenna D. End fire array

Description : Which is the non-resonant antenna? A. Broadside Antenna B. Folded Dipole C. Rhombic antenna D. End fire array

Last Answer : C. Rhombic antenna

ECE Board Exam March 1996 An antenna which is not resonant at a particular frequencies and so can be used over a wide band of frequencies and so can be used over a wide band of frequencies is called A. aperiodic B. boresight C. cassegrain D. top-loaded

Description : ECE Board Exam March 1996 An antenna which is not resonant at a particular frequencies and so can be used over a wide band of frequencies and so can be used over a wide band of frequencies is called A. aperiodic B. boresight C. cassegrain D. top-loaded

Last Answer : A. aperiodic

The frequency at which maximum amplitude ratio is attained is called the __________ frequency. (A) Corner (B) Resonant (C) Cross-over (D) Natural

Description : The frequency at which maximum amplitude ratio is attained is called the __________ frequency. (A) Corner (B) Resonant (C) Cross-over (D) Natural

Last Answer : (B) Resonant

What is the natural resonant frequency?

Description : What is the natural resonant frequency?

Last Answer : The frequency at which capacitive reactance is equal to inductive reactance.

What ionospheric layer has a daytime approximate critical frequency of 8 MHz? A. F2 layer B. F1 layer C. E layer D. D layer

Description : What ionospheric layer has a daytime approximate critical frequency of 8 MHz? A. F2 layer B. F1 layer C. E layer D. D layer

Last Answer : A. F2 layer

What is the approximate critical frequency of the E layer? A. 4 MHz B. 5 MHz C. 6 MHz D. 3 MHz

Description : What is the approximate critical frequency of the E layer? A. 4 MHz B. 5 MHz C. 6 MHz D. 3 MHz

Last Answer : A. 4 MHz

A radio communications link is to be established via the ionosphere. The maximum virtual height of the layer is 100 km at the midpoint of the path and the critical frequency is 2 MHz. The distance between stations is 600 km. determine the optimum working frequency? A. 6.32 MHz B. 2.1 MHz C. 5.4 MHz D. 1.8 MHz

Description : A radio communications link is to be established via the ionosphere. The maximum virtual height of the layer is 100 km at the midpoint of the path and the critical frequency is 2 MHz. The distance between stations is 600 ... optimum working frequency? A. 6.32 MHz B. 2.1 MHz C. 5.4 MHz D. 1.8 MHz

Last Answer : C. 5.4 MHz

What ionospheric layer has a daytime approximate critical frequency of 8 MHz? A. F2 layer B. F1 layer C. E layer D. D layer

Description : What ionospheric layer has a daytime approximate critical frequency of 8 MHz? A. F2 layer B. F1 layer C. E layer D. D layer

Last Answer : A. F2 layer

To obtain the most reliable sky wave propagation the ____ should be used. A. Lowest useable frequency (LUF). B. Maximum useable frequency (MUF). C. Optimum useable frequency (OUF). D. Critical frequency

Description : To obtain the most reliable sky wave propagation the ____ should be used. A. Lowest useable frequency (LUF). B. Maximum useable frequency (MUF). C. Optimum useable frequency (OUF). D. Critical frequency

Last Answer : C. Optimum useable frequency (OUF).

At a certain time, the MUF for transmission at an angle of incidence of 75° is 17 MHz. What is the critical frequency? A. 4.4 MHz B. 3.5 MHz C. 6.5 MHz D. 1.5 MHz

Description : At a certain time, the MUF for transmission at an angle of incidence of 75° is 17 MHz. What is the critical frequency? A. 4.4 MHz B. 3.5 MHz C. 6.5 MHz D. 1.5 MHz

Last Answer : A. 4.4 MHz

A theoretical reference antenna that provides a comparison for antenna measurements. A. Marconi antenna B. Isotropic radiator C. Yagi-Uda array D. Whip antenna

Description : A theoretical reference antenna that provides a comparison for antenna measurements. A. Marconi antenna B. Isotropic radiator C. Yagi-Uda array D. Whip antenna

Last Answer : B. Isotropic radiator

What is the theoretical gain of a Hertzian dipole? A. 1.76 dB B. 2.15 dB C. 3 dB D. 0 dB

Description : What is the theoretical gain of a Hertzian dipole? A. 1.76 dB B. 2.15 dB C. 3 dB D. 0 dB

Last Answer : A. 1.76 dB

Which of the following is standardized as part of GSM phase 2+ that can offer theoretical data speeds of upto 115 kbit/s? A. EDGE B. GPRS C. WAP D. Bluetooth

Description : Which of the following is standardized as part of GSM phase 2+ that can offer theoretical data speeds of upto 115 kbit/s? A. EDGE B. GPRS C. WAP D. Bluetooth

Last Answer : B. GPRS

Theoretical gain of a hertzian dipole A. 0 dB B. 1.76 dB C. 3 dB D. 2.15 dB

Description : Theoretical gain of a hertzian dipole A. 0 dB B. 1.76 dB C. 3 dB D. 2.15 dB

Last Answer : B. 1.76 dB

Which of the following is/are side effects of scan conversion? a. Aliasing b. Unequal intensity of diagonal lines c. Over striking in photographic applications d. Local or Global aliasing (1) a and b (2) a, b and c (3) a, c and d (4) a, b, c and d

Description : Which of the following is/are side effects of scan conversion? a. Aliasing b. Unequal intensity of diagonal lines c. Over striking in photographic applications d. Local or Global aliasing (1) a and b (2) a, b and c (3) a, c and d (4) a, b, c and d

Last Answer : a, b, c and d 

Steps to follow to produce PCM signal. A. Quantizing, sampling, and coding B. Sampling, quantizing, and coding C. Sampling, coding and quantizing D. Coding, quantizing and coding

Description : Steps to follow to produce PCM signal. A. Quantizing, sampling, and coding B. Sampling, quantizing, and coding C. Sampling, coding and quantizing D. Coding, quantizing and coding

Last Answer : B. Sampling, quantizing, and coding

As per Nyquist criterion the sampling rate is (A) 2fs (B) (1/2)fs (C) (1/2fs) (D) (2/fs) Where fs is the signal frequency

Description : As per Nyquist criterion the sampling rate is (A) 2fs (B) (1/2)fs (C) (1/2fs) (D) (2/fs) Where fs is the signal frequency

Last Answer : (A) 2fs

How to maximize the skip distance? A. Using the smallest possible radiation angle and highest possible frequency B. Using the smallest possible radiation angle and lowest possible frequency C. Using the biggest possible radiation angle and highest possible frequency D. Using the biggest possible radiation angle and lowest possible frequency

Description : How to maximize the skip distance? A. Using the smallest possible radiation angle and highest possible frequency B. Using the smallest possible radiation angle and lowest possible frequency ... highest possible frequency D. Using the biggest possible radiation angle and lowest possible frequency

Last Answer : A. Using the smallest possible radiation angle and highest possible frequency

Skip distance can be maximized by using the ____ radiation angle possible and the ____ frequency that will be refracted at that angle. A. lowest, lowest B. lowest, highest C. highest, lowest D. highest, highest

Description : Skip distance can be maximized by using the ____ radiation angle possible and the ____ frequency that will be refracted at that angle. A. lowest, lowest B. lowest, highest C. highest, lowest D. highest, highest

Last Answer : B. lowest, highest

What is meant by the term modulation index? A. The processor index. B. The ratio between the deviation of a frequency modulated signal and the modulating frequency. C. The FM signal-to-noise ratio. D. The ratio of the maximum carrier frequency deviation to the highest audio modulating frequency.

Description : What is meant by the term modulation index? A. The processor index. B. The ratio between the deviation of a frequency modulated signal and the modulating frequency. C. The FM signal-to-noise ratio. D. The ratio of the maximum carrier frequency deviation to the highest audio modulating frequency.

Last Answer : B. The ratio between the deviation of a frequency modulated signal and the modulating frequency.

What is meant by the term deviation ratio? A. The ratio of the audio modulating frequency to the center carrier frequency. B. The ratio of the maximum carrier frequency deviation to the highest audio modulating frequency. C. The ratio of the carrier center frequency to the audio modulating frequency. D. The ratio of the highest audio modulating frequency to the average audio modulating frequency.

Description : What is meant by the term deviation ratio? A. The ratio of the audio modulating frequency to the center carrier frequency. B. The ratio of the maximum carrier frequency deviation to the highest ... . D. The ratio of the highest audio modulating frequency to the average audio modulating frequency.

Last Answer : B. The ratio of the maximum carrier frequency deviation to the highest audio modulating frequency.

What is meant by the term deviation ratio? A. The ratio of the carrier center frequency to the audio modulating frequency B. The ratio of the highest audio modulating frequency to the average audio modulating frequency C. The ratio of the maximum carrier frequency deviation to the highest audio modulation frequency D. The ratio of the audio modulating frequency to the center carrier frequency

Description : What is meant by the term deviation ratio? A. The ratio of the carrier center frequency to the audio modulating frequency B. The ratio of the highest audio modulating frequency to the ... audio modulation frequency D. The ratio of the audio modulating frequency to the center carrier frequency

Last Answer : C. The ratio of the maximum carrier frequency deviation to the highest audio modulation frequency

In qualitative research paradigm, which of the following features may be considered critical? (A) Data collection with standardised research tools. (B) Sampling design with probability sample techniques. (C) Data collection with bottom-up empirical evidences. (D) Data gathering to take with top-down systematic evidences.

Description : In qualitative research paradigm, which of the following features may be considered critical? (A) Data collection with standardised research tools. (B) Sampling design with probability sample techniques ... evidences. (D) Data gathering to take with top-down systematic evidences.

Last Answer : (C) Data collection with bottom-up empirical evidences.

A resonant system has a fundamental frequency of 100 Hz. If the next higher frequency that gives a resonance are 300 Hz and 500 Hz, the system could be (a) A pip open at both ends (b) A pipe closed at both ends (c) A string vibrating between two fixed points (d) A pipe open at one end and closed at the other

Description : A resonant system has a fundamental frequency of 100 Hz. If the next higher frequency that gives a resonance are 300 Hz and 500 Hz, the system could be (a) A pip open at both ends (b) A pipe ... (c) A string vibrating between two fixed points (d) A pipe open at one end and closed at the other

Last Answer : Ans:(d)

What is Resonant Frequency?

Description : What is Resonant Frequency?

Last Answer : Answer: The frequency at which resonant peak occurs is called the resonant frequency. Resonance frequency explains about the speed of the transient response.