The width of the frequency band which is just sufficient to ensure the transmission of information at the rate and with the quality required under a specified condition and class of emission. A. Occupied bandwidth B. Reference frequency C. Necessary bandwidth D. Frequency tolerance bandwidth

The width of the frequency band which is just sufficient to ensure the transmission of
information at the rate and with the quality required under a specified condition and class of
emission.
A. Occupied bandwidth
B. Reference frequency
C. Necessary bandwidth
D. Frequency tolerance bandwidth
by

1 Answer

Answer :

C. Necessary bandwidth
by

Related questions

Width of frequency band just enough to ensure the transmission of information at a required rate and quality required, and under a specified condition and class of emission. A. Occupied bandwidth B. Transmission bandwidth C. Necessary bandwidth D. Frequency bandwidth

Description : Width of frequency band just enough to ensure the transmission of information at a required rate and quality required, and under a specified condition and class of emission. A. Occupied bandwidth B. Transmission bandwidth C. Necessary bandwidth D. Frequency bandwidth

Last Answer : C. Necessary bandwidth

Emission on a frequency or frequencies immediately outside the necessary bandwidth which result from the modulation process except spurious emission. A. Radiation B. Noise C. Out of the band D. Interference

Description : Emission on a frequency or frequencies immediately outside the necessary bandwidth which result from the modulation process except spurious emission. A. Radiation B. Noise C. Out of the band D. Interference

Last Answer : C. Out of the band

The third symbol in the designation of radio emission under the ITU rules refers to A. Type of the modulation of the main carrier B. Bandwidth C. Nature of the signals modulating the main carrier D. Type of information to be transmitted

Description : The third symbol in the designation of radio emission under the ITU rules refers to A. Type of the modulation of the main carrier B. Bandwidth C. Nature of the signals modulating the main carrier D. Type of information to be transmitted

Last Answer : D. Type of information to be transmitted

The first symbol in the designation of radio emission under the ITU rules to A. Nature of signals modulating the main carrier B. Type of information to be transmitted C. Bandwidth D. Type of modulation of the main carrier

Description : The first symbol in the designation of radio emission under the ITU rules to A. Nature of signals modulating the main carrier B. Type of information to be transmitted C. Bandwidth D. Type of modulation of the main carrier

Last Answer : D. Type of modulation of the main carrier

The ratio of the level of the modulated output of a transmitter under conditions of standard test modulation to the level of the demodulated output with no modulation applied both measured with the same bandwidth. A. Reference audio output B. None of these C. Audio frequency response D. Residual noise level

Description : The ratio of the level of the modulated output of a transmitter under conditions of standard test modulation to the level of the demodulated output with no modulation applied both measured with the ... . Reference audio output B. None of these C. Audio frequency response D. Residual noise level

Last Answer : D. Residual noise level

It is an average power of a radio transmitter supplied to the antenna transmission line taken during a long sufficient interval of time and compared with the lowest frequency encountered in the modulation, taken under the normal operating conditions. A. Carrier power B. Rated power C. Mean power D. Peak envelop power

Description : It is an average power of a radio transmitter supplied to the antenna transmission line taken during a long sufficient interval of time and compared with the lowest frequency encountered in the modulation ... operating conditions. A. Carrier power B. Rated power C. Mean power D. Peak envelop power

Last Answer : C. Mean power

In radio regulation, the first symbol in the designation of radio emission is ______. A. Bandwidth B. Nature of signal(s) modulation the main carrier C. Type of modulation of the main carrier D. Type of information to be transmitted

Description : In radio regulation, the first symbol in the designation of radio emission is ______. A. Bandwidth B. Nature of signal(s) modulation the main carrier C. Type of modulation of the main carrier D. Type of information to be transmitted

Last Answer : C. Type of modulation of the main carrier

A method of multiple accessing where a given RF channel bandwidth is divided inot smaller frequency band. A. CDMA B. ANIK-D C. TDMA D. FDMA

Description : A method of multiple accessing where a given RF channel bandwidth is divided inot smaller frequency band. A. CDMA B. ANIK-D C. TDMA D. FDMA

Last Answer : D. FDMA

The bandwidth of C-band satellite frequency band in U.S. A. 500 GHz B. 1000 GHz C. 1000 MHz D. 500 MHz

Description : The bandwidth of C-band satellite frequency band in U.S. A. 500 GHz B. 1000 GHz C. 1000 MHz D. 500 MHz

Last Answer : D. 500 MHz

Noise from random acoustic or electric noise that has equal energy per cycle over a specified total frequency band. A. Gaussian noise B. Whiter noise C. Thermal noise D. All of the above

Description : Noise from random acoustic or electric noise that has equal energy per cycle over a specified total frequency band. A. Gaussian noise B. Whiter noise C. Thermal noise D. All of the above

Last Answer : D. All of the above

Noise from random acoustic or electric noise that has equal per cycle over a specified total frequency band. A. Thermal noise B. White noise C. Gaussian noise D. All of these

Description : Noise from random acoustic or electric noise that has equal per cycle over a specified total frequency band. A. Thermal noise B. White noise C. Gaussian noise D. All of these

Last Answer : D. All of these

An audit process is a well-defined methodology for organizing an audit to ensure that a. The evidence gathered is both sufficient and competent. b. All appropriate audit objectives are specified. c. All appropriate audit objectives are met. d. All of these

Description : An audit process is a well-defined methodology for organizing an audit to ensure that a. The evidence gathered is both sufficient and competent. b. All appropriate audit objectives are specified. c. All appropriate audit objectives are met. d. All of these

Last Answer : All of these

Which of the following contributes to the broadening of laser emission bandwidth? a. Doppler shift of moving atoms and molecules b. Amplification within the laser medium c. Coherence of the laser light d. Optical pumping of the laser transition

Description : Which of the following contributes to the broadening of laser emission bandwidth? a. Doppler shift of moving atoms and molecules b. Amplification within the laser medium c. Coherence of the laser light d. Optical pumping of the laser transition

Last Answer : a. Doppler shift of moving atoms and molecules

In the designation of bandwidth and emission, what letter in the first symbol represents a double-sideband type of modulation? A. A B. B C. C D. H

Description : In the designation of bandwidth and emission, what letter in the first symbol represents a double-sideband type of modulation? A. A B. B C. C D. H

Last Answer : A. A

What is the principal difference between asynchronous and synchronous transmission? A. The clocking is mixed with the data in synchronous transmission B. The pulse height are difficult C. The clocking is derived from the data in synchronous D. The bandwidth required is difficult.

Description : What is the principal difference between asynchronous and synchronous transmission? A. The clocking is mixed with the data in synchronous transmission B. The pulse height are difficult C. The clocking is derived from the data in synchronous D. The bandwidth required is difficult.

Last Answer : C. The clocking is derived from the data in synchronous

ECE Board Exam March 1996 What is the one principal difference between synchronous and asynchronous transmission? A. the pulse height are different B. the clocking is derived from the data in synchronous transmission C. the clocking is mixed with the data in asynchronous D. the bandwidth required is different

Description : ECE Board Exam March 1996 What is the one principal difference between synchronous and asynchronous transmission? A. the pulse height are different B. the clocking is derived from the data in ... C. the clocking is mixed with the data in asynchronous D. the bandwidth required is different

Last Answer : B. the clocking is derived from the data in synchronous transmission

Average power of a radio transmitter supplied to the antenna transmission line by a transmitter during one radio frequency cycle taken under the condition of no modulation. A. Peak envelop power B. Rated power C. Carrier power D. Mean power

Description : Average power of a radio transmitter supplied to the antenna transmission line by a transmitter during one radio frequency cycle taken under the condition of no modulation. A. Peak envelop power B. Rated power C. Carrier power D. Mean power

Last Answer : C. Carrier power

How can receiver desensitizing be reduced? A. Increase the receiver bandwidth B. Ensure good RF shielding between the transmitter and receiver C. Increase the transmitter audio gain D. Decrease the receiver squelch, gain.

Description : How can receiver desensitizing be reduced? A. Increase the receiver bandwidth B. Ensure good RF shielding between the transmitter and receiver C. Increase the transmitter audio gain D. Decrease the receiver squelch, gain.

Last Answer : D. Decrease the receiver squelch, gain.

Probably the best reminder a beginning teacher might take with him into his class room is Options: A) Knowledge of one's subject is the crucial thing B) Liking children is a necessary and a sufficient condition for effective teaching C) Pupil adjustment is the paramount educational objective D) Learning is effective to the extent that it involves the goals and purposes of individual children

Description : Probably the best reminder a beginning teacher might take with him into his class room is Options: A) Knowledge of one's subject is the crucial thing B) Liking children is a necessary and ... D) Learning is effective to the extent that it involves the goals and purposes of individual children

Last Answer : D) Learning is effective to the extent that it involves the goals and purposes of individual children

Is the width of the range of wavelengths emitted by the light source a. Bandwidth b. Chromatic Dispersion c. Spectral width d. Beamwidth

Description : Is the width of the range of wavelengths emitted by the light source a. Bandwidth b. Chromatic Dispersion c. Spectral width d. Beamwidth

Last Answer : c. Spectral width

What is the typical bandwidth of a satellite band? A. 36 MHz B. 40 MHz C. 70 MHz D. 500 MHz

Description : What is the typical bandwidth of a satellite band? A. 36 MHz B. 40 MHz C. 70 MHz D. 500 MHz

Last Answer : D. 500 MHz

What is the bandwidth available in the commercial C-band? A. 1000 MHz B. 36 MHz C. 250 MHz D. 500 MHz

Description : What is the bandwidth available in the commercial C-band? A. 1000 MHz B. 36 MHz C. 250 MHz D. 500 MHz

Last Answer : D. 500 MHz

A third symbol radio emission which represent telephone transmission including sound broadcasting. A. W B. F C. C D. E

Description : A third symbol radio emission which represent telephone transmission including sound broadcasting. A. W B. F C. C D. E

Last Answer : D. E

Production of radiation by a radio transmitting station A. Monitoring B. Emission C. Radiation D. Transmission

Description : Production of radiation by a radio transmitting station A. Monitoring B. Emission C. Radiation D. Transmission

Last Answer : B. Emission

ECE Board Exam March 1996 The letter-number designation B8E is a form of modulation also known as ___________. A. pilot carrier system B. independent sideband emission C. lincomplex D. vestigial sideband transmission

Description : ECE Board Exam March 1996 The letter-number designation B8E is a form of modulation also known as ___________. A. pilot carrier system B. independent sideband emission C. lincomplex D. vestigial sideband transmission

Last Answer : B. independent sideband emission

The frequency tolerance of an AM radio broadcast station A. 200 Hz B. 2000 Hz C. 20 Hz D. 2 Hz

Description : The frequency tolerance of an AM radio broadcast station A. 200 Hz B. 2000 Hz C. 20 Hz D. 2 Hz

Last Answer : C. 20 Hz

In data communication the transmission of binary signals will require _______. A. Same bandwidth as analog B. More bandwidth than analog C. Less bandwidth than analog D. Bigger cable diameter

Description : In data communication the transmission of binary signals will require _______. A. Same bandwidth as analog B. More bandwidth than analog C. Less bandwidth than analog D. Bigger cable diameter

Last Answer : B. More bandwidth than analog

ECE Board Exam March 1996 SSB transmission requires only ______ of the bandwidth for a DSBFC transmission. A. ¼ B. 2/3 C. ½ D. ¾

Description : ECE Board Exam March 1996 SSB transmission requires only ______ of the bandwidth for a DSBFC transmission. A. ¼ B. 2/3 C. ½ D. ¾

Last Answer : C. ½

What is antenna bandwidth? A. Antenna length divided by the number of elements B. The angle between the half-power radiation points C. The angle formed between two imaginary lines drawn through D. The frequency range over which an antenna can be expected to operate satisfactorily

Description : What is antenna bandwidth? A. Antenna length divided by the number of elements B. The angle between the half-power radiation points C. The angle formed between two imaginary lines drawn through D. The frequency range over which an antenna can be expected to operate satisfactorily

Last Answer : D. The frequency range over which an antenna can be expected to operate satisfactorily

Indicate the false statement. A. HF mixer are generally noisier than HF amplifiers. B. Impulse noise voltage is dependent on bandwidth C. Thermal noise is independent of the frequency at which is measured. D. Industrial noise is usually of the impulse type.

Description : Indicate the false statement. A. HF mixer are generally noisier than HF amplifiers. B. Impulse noise voltage is dependent on bandwidth C. Thermal noise is independent of the frequency at which is measured. D. Industrial noise is usually of the impulse type.

Last Answer : B. Impulse noise voltage is dependent on bandwidth

What is the approximate bandwidth of an FM system with 10 kHz of modulating frequency and a 150 kHz of frequency deviation? A. 300 kHz B. 320 kHz C. 150 kHz D. 200 kHz

Description : What is the approximate bandwidth of an FM system with 10 kHz of modulating frequency and a 150 kHz of frequency deviation? A. 300 kHz B. 320 kHz C. 150 kHz D. 200 kHz

Last Answer : B. 320 kHz

What is meant by the term antenna bandwidth A. Antenna length divided by the number of elements. B. The angle between the half-power radiation points C. The frequency range over which and antenna can be expected to perform well D. The angle formed between two imaginary line drawn through the ends of the elements

Description : What is meant by the term antenna bandwidth A. Antenna length divided by the number of elements. B. The angle between the half-power radiation points C. The frequency range over which and antenna ... perform well D. The angle formed between two imaginary line drawn through the ends of the elements

Last Answer : C. The frequency range over which and antenna can be expected to perform well

The method of determining the bandwidth of any processing system is ______. A. Bandwidth analysis B. Frequency spectrum C. Spectral analysis D. Frequency analysis

Description : The method of determining the bandwidth of any processing system is ______. A. Bandwidth analysis B. Frequency spectrum C. Spectral analysis D. Frequency analysis

Last Answer : C. Spectral analysis

Determine from the following radio frequency that falls under the very high frequency band of the radio spectrum. A. 345.00 MHz B. 144.50 MHz C. 235.50 MHz D. 450.00 MHz

Description : Determine from the following radio frequency that falls under the very high frequency band of the radio spectrum. A. 345.00 MHz B. 144.50 MHz C. 235.50 MHz D. 450.00 MHz

Last Answer : C. 235.50 MHz

Which of the following fall under the high frequency band of the radio spectrum? A. 8.2345 MHz B. 150.50 MHz C. 2.4555 MHz D. 35.535 MHz

Description : Which of the following fall under the high frequency band of the radio spectrum? A. 8.2345 MHz B. 150.50 MHz C. 2.4555 MHz D. 35.535 MHz

Last Answer : A. 8.2345 MHz

Which of the following is not done during the client selection and retention phase of planning? a. Obtain and review financial information b. Consider the need for special skills c. Ensure that the firm has sufficient resources to complete the engagement in a timely manner. d. Obtain an understanding of internal controls

Description : Which of the following is not done during the client selection and retention phase of planning? a. Obtain and review financial information b. Consider the need for special skills c. Ensure ... resources to complete the engagement in a timely manner. d. Obtain an understanding of internal controls

Last Answer : Obtain an understanding of internal controls

ECE Board Exam March 1996 Modems are required to connect computer to telephone lines because ___________. A. telephone company rules required them B. the telephone network bandwidth is too high C. none of the above D. the telephone network will pass direct current

Description : ECE Board Exam March 1996 Modems are required to connect computer to telephone lines because ___________. A. telephone company rules required them B. the telephone network bandwidth is too high C. none of the above D. the telephone network will pass direct current

Last Answer : D. the telephone network will pass direct current

What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000

Description : What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000

Last Answer : C. 125,000

The main aspect of 'casual research' is ____________ 1. necessary condition 2. sufficient condition 3. both 1 & 2 4. neither 1 nor 2 5. none of these

Description : The main aspect of 'casual research' is ____________ 1. necessary condition 2. sufficient condition 3. both 1 & 2 4. neither 1 nor 2 5. none of these

Last Answer : both 1 & 2

The necessary and sufficient condition for equilibrium between two phases is (A) The concentration of each component should be same in the two phases (B) The temperature of each phase should be same (C) The pressure should be same in the two phases (D) The chemical potential of each component should be same in the two phases

Description : The necessary and sufficient condition for equilibrium between two phases is (A) The concentration of each component should be same in the two phases (B) The temperature of each phase should be same ( ... the two phases (D) The chemical potential of each component should be same in the two phases

Last Answer : (D) The chemical potential of each component should be same in the two phases

What is the necessary and sufficient condition for stability?

Description : What is the necessary and sufficient condition for stability?

Last Answer : The necessary and sufficient condition for stability is that all of the elements in the first column of the routh array should be positive

The necessary and sufficient condition for a rational function of, T(s) to be driving point impedance of an RC

Description : The necessary and sufficient condition for a rational function of, T(s) to be driving point impedance of an RC network is that all poles and zeros should be

Last Answer : The necessary and sufficient condition for a rational function of, T(s) to be driving point impedance of an RC network is that all poles and zeros should be simple and and lie on the negative axis in the s -plane

It is the ratio of the transmission bit rate to the minimum bandwidth required for a particular modulation scheme

Description : It is the ratio of the transmission bit rate to the minimum bandwidth required for a particular modulation scheme

Last Answer : Bandwidth efficiency, Information density, or Spectral efficiency

Referred to as an average power from the radio transmitter supplied to the antenna transmission line taken during one radio frequency cycle under no modulation. A. Carrier power B. Rated power C. Peak envelop power D. Mean power

Description : Referred to as an average power from the radio transmitter supplied to the antenna transmission line taken during one radio frequency cycle under no modulation. A. Carrier power B. Rated power C. Peak envelop power D. Mean power

Last Answer : A. Carrier power

It indicates what signal frequencies can be propagated through a given distance of fiber cable. ∙ A. Bandwidth Distance Product ∙ B. Pulse width dispersion ∙ C. Rise time ∙ D. Cutoff frequency

Description : It indicates what signal frequencies can be propagated through a given distance of fiber cable. ∙ A. Bandwidth Distance Product ∙ B. Pulse width dispersion ∙ C. Rise time ∙ D. Cutoff frequency

Last Answer : A. Bandwidth Distance Product

In radio signal emission designation, the fifth symbol means A. Details of signals B. Type of information transmitted C. Nature of multiplexing D. Nature of signal modulating the main carrier

Description : In radio signal emission designation, the fifth symbol means A. Details of signals B. Type of information transmitted C. Nature of multiplexing D. Nature of signal modulating the main carrier

Last Answer : C. Nature of multiplexing

The carrier swing necessary to provide 80% modulation in the FM broadcasting band is __________. A. 150 kHz B. 120 kHz C. 60 kHz D. 75 kHz

Description : The carrier swing necessary to provide 80% modulation in the FM broadcasting band is __________. A. 150 kHz B. 120 kHz C. 60 kHz D. 75 kHz

Last Answer : B. 120 kHz

Which of the following is not a way of minimizing if not eliminating noise? A. Use redundancy B. Increase transmitted power C. Reduce signaling rate D. Increase channel bandwidth

Description : Which of the following is not a way of minimizing if not eliminating noise? A. Use redundancy B. Increase transmitted power C. Reduce signaling rate D. Increase channel bandwidth

Last Answer : D. Increase channel bandwidth

In modulation technique, which of the following is referred to audible pitch? A. Width B. Frequency C. Harmonic D. Amplitude

Description : In modulation technique, which of the following is referred to audible pitch? A. Width B. Frequency C. Harmonic D. Amplitude

Last Answer : B. Frequency

What is the first symbol of a radio signal transmission having an amplitude modulated signal carrier, double side band? A. C B. B C. H D. A

Description : What is the first symbol of a radio signal transmission having an amplitude modulated signal carrier, double side band? A. C B. B C. H D. A

Last Answer : D. A