Find the equivalent inductance per foot of the above cable? A. 13.5 nF/ft B. 13.5 pF/ft C. 116.8 nH/ft D. 116.8 pF/ft

Find the equivalent inductance per foot of the above cable?
A. 13.5 nF/ft
B. 13.5 pF/ft
C. 116.8 nH/ft
D. 116.8 pF/ft
by

1 Answer

Answer :

C. 116.8 nH/ft
by

Related questions

What is the velocity factor of coaxial cable with a characteristic impedance of 50Ω and capacitance of 30pF/ft and inductance of 75 nH/ft? A. 0.58 B.0.68 C. 0.98 D. 0.81

Description : What is the velocity factor of coaxial cable with a characteristic impedance of 50Ω and capacitance of 30pF/ft and inductance of 75 nH/ft? A. 0.58 B.0.68 C. 0.98 D. 0.81

Last Answer : B.0.68

A transmitted signal 5 meters in wavelength is received by an antenna coil having a 50-Ω resistance and a 0.01 H inductance. What is the capacitance of the tuner shunting the antenna coil at this point? A. 0.704 fF B. 0.704 μF C. 0.704 nF D. 0.704 mF

Description : A transmitted signal 5 meters in wavelength is received by an antenna coil having a 50-Ω resistance and a 0.01 H inductance. What is the capacitance of the tuner shunting the antenna coil at this point? A. 0.704 fF B. 0.704 μF C. 0.704 nF D. 0.704 mF

Last Answer : A. 0.704 fF

Calculate the reverberation time of a living room 8 ft high, 13 ft wide and 20 ft long. The total absorption of the building structure inside the room is 180.7 sabines with four persons present in the room. A. 0.5 ms B. 0.05 s C. 0.5 s D. 5 ms

Description : Calculate the reverberation time of a living room 8 ft high, 13 ft wide and 20 ft long. The total absorption of the building structure inside the room is 180.7 sabines with four persons present in the room. A. 0.5 ms B. 0.05 s C. 0.5 s D. 5 ms

Last Answer : C. 0.5 s

Cable attenuation is usually expressed in terms of a. Loss per foot b. dB/km c. intensity per mile d. voltage drop per inch

Description : Cable attenuation is usually expressed in terms of a. Loss per foot b. dB/km c. intensity per mile d. voltage drop per inch

Last Answer : b. dB/km

What is the time delay introduced by a 75-ft coaxial cable with a dielectric constant of 2.3? A. 1.54 ns B. 11.5 ns C. 115.6 ns D. 1156 ns

Description : What is the time delay introduced by a 75-ft coaxial cable with a dielectric constant of 2.3? A. 1.54 ns B. 11.5 ns C. 115.6 ns D. 1156 ns

Last Answer : C. 115.6 ns

Which of the cable length has the highest attenuation? a. 1 km b. 2 km c. 95 ft d. 5500 ft

Description : Which of the cable length has the highest attenuation? a. 1 km b. 2 km c. 95 ft d. 5500 ft

Last Answer : b. 2 km

A cylindrical cable of core radius 1.25cm and impregnated paper insulation of thickness 2.13cm and relative permittivity 3.5. Compute the capacitance of the cable/km (in nF

Description : A cylindrical cable of core radius 1.25cm and impregnated paper insulation of thickness 2.13cm and relative permittivity 3.5. Compute the capacitance of the cable/km (in nF

Last Answer : To calculate the capacitance of the cable per kilometer, you can use the following formula: C = ε * ε0 * A / d where: C is the capacitance of the cable per kilometer (in farads) ε is ... * 10^9 = 644 nF/km So the capacitance of the cable per kilometer would be approximately 644 nanofarads.

A cable of core radius 1.25cm and impregnated paper insulation of thickness 2.13cm and relative permittivity 3.5. Compute the capacitance of the cable/km(in nF) a) 195.7 b) 179.5 c) 157.9 d) 197.5

Description : A cable of core radius 1.25cm and impregnated paper insulation of thickness 2.13cm and relative permittivity 3.5. Compute the capacitance of the cable/km(in nF) a) 195.7 b) 179.5 c) 157.9 d) 197.5

Last Answer : a) 195.7

The equivalent inductance of two coils with series opposing flux having inductances 7H and 2H with a mutual inductance of 1H. a) 10 b) 7 c) 11 d) 13

Description : The equivalent inductance of two coils with series opposing flux having inductances 7H and 2H with a mutual inductance of 1H. a) 10 b) 7 c) 11 d) 13

Last Answer : b) 7

The equivalent inductances of two coils 2H and 5H in series aiding flux with mutual inductance of 3H is a) 10 b) 30 c) 1 d) 13

Description : The equivalent inductances of two coils 2H and 5H in series aiding flux with mutual inductance of 3H is a) 10 b) 30 c) 1 d) 13

Last Answer : d) 13

The hexadecimal equivalent of a binary 10110010 is ________. 116) A) E216 B) A216 C) C216 D) B216

Description : The hexadecimal equivalent of a binary 10110010 is ________. 116) A) E216 B) A216 C) C216 D) B216

Last Answer : D) B216

If a transmission line has a power loss of 6 dB per 100 feet, what is the power at the feed point to the antenna at the end of a 200 foot transmission line fed by a 100 watt transmitter? A. 70 watts B. 50 watts C. 25 watts D. 6 watts

Description : If a transmission line has a power loss of 6 dB per 100 feet, what is the power at the feed point to the antenna at the end of a 200 foot transmission line fed by a 100 watt transmitter? A. 70 watts B. 50 watts C. 25 watts D. 6 watts

Last Answer : D. 6 watts

Which of the following characteristics is most critical in determining the size of the cable to be used in a particular circuit? A. voltage rating B. weight per unit length C. current rating D. inductance per unit length

Description : Which of the following characteristics is most critical in determining the size of the cable to be used in a particular circuit? A. voltage rating B. weight per unit length C. current rating D. inductance per unit length

Last Answer : Answer: C

Capacitance grading of cable implies (a) use of dielectrics of different permeabilities (b) grading according to capacitance of cables per km length (c) cables using single dielectric in different concentrations (d) capacitance required to be introduced at different lengths to counter the effect of inductance (e) none of the above

Description : Capacitance grading of cable implies (a) use of dielectrics of different permeabilities (b) grading according to capacitance of cables per km length (c) cables using single dielectric in different ... introduced at different lengths to counter the effect of inductance (e) none of the above

Last Answer : (a) use of dielectrics of different permeabilities

13. Which one of the following pairs is isostructural (i.e. having the same shape and hybridization)? (1) 4 4 [BF and NH ]   (2) 3 3 [BCl and BaCl ] (3) 3 3 [NH and NO ]  (4) [NF3 and BF3 ] Sol: [1] In both the compounds, central atom i

Description : 13. Which one of the following pairs is isostructural (i.e. having the same shape and hybridization)? (1) 4 4 [BF and NH ]   (2) 3 3 [BCl and BaCl ] (3) 3 3 [NH and NO ]  (4) [NF3 and BF3 ] Sol: [1] In both the compounds, central atom i

Last Answer : (1) 4 4 [BF and NH ]  

If the length of a Hertz dipole is decreased A. its resonant frequency will be lowered its distributed inductance will be increased B. its distributed inductance will be decreased C. its resonant frequency will be increased D. its distributed capacitance between the antenna and ground will be increased.

Description : If the length of a Hertz dipole is decreased A. its resonant frequency will be lowered its distributed inductance will be increased B. its distributed inductance will be decreased C. its ... frequency will be increased D. its distributed capacitance between the antenna and ground will be increased.

Last Answer : C. its resonant frequency will be increased

If an antenna is too short for the wavelength being used, the effective length can be increased by adding: A. capacitance in series B. inductance in series C. resistance in parallel D. resistance in series

Description : If an antenna is too short for the wavelength being used, the effective length can be increased by adding: A. capacitance in series B. inductance in series C. resistance in parallel D. resistance in series

Last Answer : B. inductance in series

What is the propagation velocity of a signal in a transmission line whose inductance and capacitance are 5μH/m and 20μF/m respectively? A. 100x103 m/s B. 100 m/s C. 10x103 m/s D. 100x106 m/s

Description : What is the propagation velocity of a signal in a transmission line whose inductance and capacitance are 5μH/m and 20μF/m respectively? A. 100x103 m/s B. 100 m/s C. 10x103 m/s D. 100x106 m/s

Last Answer : A. 100x103 m/s

Which of the following determines the characteristics of a transmission line? A. Inductance B. Capacitance C. Physical dimension D. Length

Description : Which of the following determines the characteristics of a transmission line? A. Inductance B. Capacitance C. Physical dimension D. Length

Last Answer : C. Physical dimension

Referred to the dielectric constant of a transmission line material. A. Inductance and capacitance B. Velocity factor C. Characteristic impedance D. Propagation velocity

Description : Referred to the dielectric constant of a transmission line material. A. Inductance and capacitance B. Velocity factor C. Characteristic impedance D. Propagation velocity

Last Answer : B. Velocity factor

If span is 150 mts and sag is 10 ft of a cable carrying a load of 3200 kg per horizontal metre then tension of ends is a.104,000 kg b.107 dynes c.1200,000 kg d.932,000 kg e.584,000 kg

Description : If span is 150 mts and sag is 10 ft of a cable carrying a load of 3200 kg per horizontal metre then tension of ends is a.104,000 kg b.107 dynes c.1200,000 kg d.932,000 kg e.584,000 kg

Last Answer : d. 932,000 kg

The noise from an airplane engine 100 ft from an observer is found to have an intensity of 45dB. What will be the intensity when the plane flies overhead at an altitude of 1 mi? A. 10.5 dB B. 34.5 dB C. 35 dB D. 20.5 dB

Description : The noise from an airplane engine 100 ft from an observer is found to have an intensity of 45dB. What will be the intensity when the plane flies overhead at an altitude of 1 mi? A. 10.5 dB B. 34.5 dB C. 35 dB D. 20.5 dB

Last Answer : A. 10.5 dB

Determine the gain of a 6 ft. parabolic dish operating at 1800 MHz. A. 30 dB B. 11.2 dB C. 15.5 dB D. 28.17 dB

Description : Determine the gain of a 6 ft. parabolic dish operating at 1800 MHz. A. 30 dB B. 11.2 dB C. 15.5 dB D. 28.17 dB

Last Answer : D. 28.17 dB

The length of a Marconi antenna to operate with 985 kHz is ______. A. 200 ft B. 500 ft C. 250 ft D. 999 ft

Description : The length of a Marconi antenna to operate with 985 kHz is ______. A. 200 ft B. 500 ft C. 250 ft D. 999 ft

Last Answer : C. 250 ft

In the above problem, what is the new velocity of sound assuming dry air medium? A. 343 ft/s B. 3430 m/s C. 343 m/s D. 342 m/s

Description : In the above problem, what is the new velocity of sound assuming dry air medium? A. 343 ft/s B. 3430 m/s C. 343 m/s D. 342 m/s

Last Answer : C. 343 m/s

If temperature change is 19°C, what amount of change to sound velocity is possible? A. 11.53 ft/s B. 11.53 m/s C. 19.304 ft/s D. 19.304 m/s

Description : If temperature change is 19°C, what amount of change to sound velocity is possible? A. 11.53 ft/s B. 11.53 m/s C. 19.304 ft/s D. 19.304 m/s

Last Answer : B. 11.53 m/s

At one atmospheric pressure, what is the approximate speed of sound in steel? A. 5150 m/s B. 5150 ft/s C. 4990 m/s D. 4990 ft/s

Description : At one atmospheric pressure, what is the approximate speed of sound in steel? A. 5150 m/s B. 5150 ft/s C. 4990 m/s D. 4990 ft/s

Last Answer : A. 5150 m/s

What is transit time (time delay) of a 50-ft length transmission line of the above problem? A. 50 ns B. 100 ns C. 75 ns D. 65 ns

Description : What is transit time (time delay) of a 50-ft length transmission line of the above problem? A. 50 ns B. 100 ns C. 75 ns D. 65 ns

Last Answer : C. 75 ns

What is the physical length of the above transmission line at 3/8λ long? A.0.82 m B. 0.82 ft C. 0.82 in D. 0.82 cm

Description : What is the physical length of the above transmission line at 3/8λ long? A.0.82 m B. 0.82 ft C. 0.82 in D. 0.82 cm

Last Answer : B. 0.82 ft

If the operating frequency is 450 MHz what length of a pair of conductors is considered to be a transmission line? A. 2.19 ft B. 2.19 m C. 0.219 ft D. 0.219 m

Description : If the operating frequency is 450 MHz what length of a pair of conductors is considered to be a transmission line? A. 2.19 ft B. 2.19 m C. 0.219 ft D. 0.219 m

Last Answer : C. 0.219 ft

What is the maximum line-of-sight distance between a paging antenna 250 ft high and a pager receiver 3.5ft of the ground? A. 25 km B.25mi C. 70.73 km D. 70.73 mi

Description : What is the maximum line-of-sight distance between a paging antenna 250 ft high and a pager receiver 3.5ft of the ground? A. 25 km B.25mi C. 70.73 km D. 70.73 mi

Last Answer : B.25mi

ECE Board Exam March 1996 A car horn outdoors produces a sound intensity level of 90 dB at 10 ft away. At this distance, what is the sound power in watt? A. 12 W B. 0.12 W C. 0.012 W D. 1.2 W

Description : ECE Board Exam March 1996 A car horn outdoors produces a sound intensity level of 90 dB at 10 ft away. At this distance, what is the sound power in watt? A. 12 W B. 0.12 W C. 0.012 W D. 1.2 W

Last Answer : C. 0.012 W

Choose the set of pressure intensities that are equivalent. (A) 4.33 psi, 10 ft. of water, 8.83 inches of Hg (B) 4.33 psi, 10 ft. of water, 20.7 inches of Hg (C) 10 psi, 19.7 ft. of water, 23.3 inches of Hg (D) 10 psi, 19.7 ft. of water, 5.3 inches of Hg

Description : Choose the set of pressure intensities that are equivalent. (A) 4.33 psi, 10 ft. of water, 8.83 inches of Hg (B) 4.33 psi, 10 ft. of water, 20.7 inches of Hg (C) 10 psi, 19.7 ft. of water, 23.3 inches of Hg (D) 10 psi, 19.7 ft. of water, 5.3 inches of Hg

Last Answer : (A) 4.33 psi, 10 ft. of water, 8.83 inches of Hg

A popular light wavelength in fiber-optic cable is a. 0.7 um b. 1.3 um c. 1.5 um d. 1.8 um

Description : A popular light wavelength in fiber-optic cable is a. 0.7 um b. 1.3 um c. 1.5 um d. 1.8 um

Last Answer : b. 1.3 um

If air is at pressure, p, of 3200 lbf/ft2 , and at a temperature, T, of 800 ˚R, what is the specific volume, v? (R=5303 ft-lbf/lbm-˚R, and air can be modeled as an ideal gas.)  A.9.8 ft^3/lbm  B.11.2 ft^3/lbm  C.13.33 ft^3/lbm  D.14.2 ft^3/lbm Formula: pv = RT v = RT / p

Description : If air is at pressure, p, of 3200 lbf/ft2 , and at a temperature, T, of 800 ˚R, what is the specific volume, v? (R=5303 ft-lbf/lbm-˚R, and air can be modeled as an ideal gas.)  A.9.8 ft^3/lbm  B.11.2 ft^3/lbm  C.13.33 ft^3/lbm  D.14.2 ft^3/lbm Formula: pv = RT v = RT / p

Last Answer : 13.33 ft^3/lbm

What is the velocity factor for non-foam dielectric 50 or 75 ohm flexible coaxial cable such as RG 8, 11, 58 and 59? A. 2.70 B. 0.66 C. 0.30 D. 0.10

Description : What is the velocity factor for non-foam dielectric 50 or 75 ohm flexible coaxial cable such as RG 8, 11, 58 and 59? A. 2.70 B. 0.66 C. 0.30 D. 0.10

Last Answer : B. 0.66

What is the velocity factor for non-foam dielectric 50 or 75 ohm flexible coaxial cable such as RG 8, 11, 58 and 59? A. 2.70 B. 0.10 C. 0.66 D. 0.30

Description : What is the velocity factor for non-foam dielectric 50 or 75 ohm flexible coaxial cable such as RG 8, 11, 58 and 59? A. 2.70 B. 0.10 C. 0.66 D. 0.30

Last Answer : C. 0.66

Compute the capacitance between two concentric shells of inner radius 2m and the outer radius is infinitely large. a) 0.111 nF b) 0.222 nF c) 4.5 nF d) 5.4 nF

Description : Compute the capacitance between two concentric shells of inner radius 2m and the outer radius is infinitely large. a) 0.111 nF b) 0.222 nF c) 4.5 nF d) 5.4 nF

Last Answer : b) 0.222 nF

The first stage of a two-stage amplifier has a voltage gain of 10, a 600 Ω input resistor, a 1600Ω equivalent noise resistance and 27kΩ output resistor. For the second stage, these values are 25, 81kΩ, 19kΩ, and 1MΩ, respectively. Calculate the equivalent input-noise resistance of this two stage amplifier. A. 2,518 kΩ B. 2,518 Ω C. 251.8 Ω D. 12,518 Ω

Description : The first stage of a two-stage amplifier has a voltage gain of 10, a 600 Ω input resistor, a 1600Ω equivalent noise resistance and 27kΩ output resistor. For the second stage, these values are 25, 81kΩ, 19kΩ, and 1MΩ, ... this two stage amplifier. A. 2,518 kΩ B. 2,518 Ω C. 251.8 Ω D. 12,518 Ω

Last Answer : B. 2,518 Ω

The speech coding rate in D-AMPS is ____. A. 8 kbps B. 13 kbps C. 15 kbps D. 20 kbps

Description : The speech coding rate in D-AMPS is ____. A. 8 kbps B. 13 kbps C. 15 kbps D. 20 kbps

Last Answer : A. 8 kbps

In GSM cellular system, the speech coding rate is ____. A. 13 kbps B. 8 kbps C. 15 kbps D. 20 kbps

Description : In GSM cellular system, the speech coding rate is ____. A. 13 kbps B. 8 kbps C. 15 kbps D. 20 kbps

Last Answer : A. 13 kbps

Cable attenuation is usually expressed in terms of ∙ A. loss per foot ∙ B. dB/km ∙ C. intensity per mile ∙ D. voltage drop per inch

Description : Cable attenuation is usually expressed in terms of ∙ A. loss per foot ∙ B. dB/km ∙ C. intensity per mile ∙ D. voltage drop per inch

Last Answer : . dB/km

Cable attenuation is usually expressed in terms of ∙ a. Loss per foot ∙ b. dB/km ∙ c. intensity per mile ∙ d. voltage drop per inch

Description : Cable attenuation is usually expressed in terms of ∙ a. Loss per foot ∙ b. dB/km ∙ c. intensity per mile ∙ d. voltage drop per inch

Last Answer : ∙ b. dB/km

"NF" Suffix on answers to "General" questions?

Description : "NF" Suffix on answers to "General" questions?

Last Answer : I think it is unnecessary. If you are not following a question or not makes no difference to me. If I want a response and don’t get one, I’ll PM you.

Who is NF?

Description : Who is NF?

Last Answer : NO U

What famous people have the initials nf?

Description : What famous people have the initials nf?

Last Answer : What is the answer ?

If Nf , Nd and H are total number flow channels, total number of potential drops and total hydraulic head differences respectively, the discharge q through the complete flow is given by (where K is a constant) (A) q = (Nf/Nd) (B) q = KH (Nd/(Nf ) (C) q = KH (Nf/Nd) (D) q = KH Nf/Nd)

Description : If Nf , Nd and H are total number flow channels, total number of potential drops and total hydraulic head differences respectively, the discharge q through the complete flow is given by (where K is a constant) (A) q = (Nf/Nd) (B) q = KH (Nd/(Nf ) (C) q = KH (Nf/Nd) (D) q = KH Nf/Nd)

Last Answer : Answer: Option C

What is 1 NF (Normal Form)?

Description : What is 1 NF (Normal Form)?

Last Answer : The domain of attribute must include only atomic (simple, indivisible) values.

How many square inches 1 in. by 1 in. fit in an area of 1 square foot 1 ft by 1 ft?

Description : How many square inches 1 in. by 1 in. fit in an area of 1 square foot 1 ft by 1 ft?

Last Answer : 144 sq.in.