If a transmitting antenna is 100 meters high and a separate receiving antenna is 64 meters high, what is the maximum space wave communication distance possible between them? A. 18 km B. 72 km C. 164 km D. 656 km

If a transmitting antenna is 100 meters high and a separate receiving antenna is 64 meters
high, what is the maximum space wave communication distance possible between them?
A. 18 km
B. 72 km
C. 164 km
D. 656 km
by

1 Answer

Answer :

B. 72 km
by

Related questions

A receiver is located 64 km from a space wave transmitting antenna that is 100 meters high. Find the required height of the receiving antenna. A. 36 meters high B. 64 meters high C. 100 meters high D. 182.25 meters high

Description : A receiver is located 64 km from a space wave transmitting antenna that is 100 meters high. Find the required height of the receiving antenna. A. 36 meters high B. 64 meters high C. 100 meters high D. 182.25 meters high

Last Answer : A. 36 meters high

For a space wave transmission, the radio horizon distance of a receiving antenna with a height of 64 meters is approximately A. 8 km B. 32 km C. 64 km D. 256 km

Description : For a space wave transmission, the radio horizon distance of a receiving antenna with a height of 64 meters is approximately A. 8 km B. 32 km C. 64 km D. 256 km

Last Answer : B. 32 km

For a space wave transmission, the radio horizon distance of a transmitting antenna with a height of 100 meters is approximately:A. 10 km B. 40 km C. 100 km D. 400 km

Description : For a space wave transmission, the radio horizon distance of a transmitting antenna with a height of 100 meters is approximately: A. 10 km B. 40 km C. 100 km D. 400 km

Last Answer : B. 40 km

ECE Board Exam March 1996 When the transmitting and receiving antennas are in line-of-sight of each other, the mode of propagation is ________ wave. A. space or direct B. ground C. surface D. sky

Description : ECE Board Exam March 1996 When the transmitting and receiving antennas are in line-of-sight of each other, the mode of propagation is ________ wave. A. space or direct B. ground C. surface D. sky

Last Answer : A. space or direct

Stacking elements in a transmitting antenna system A. increases the field strength at the receiving antenna B. increases the directivity of the transmitter antenna C. decrease the size of the lobe in the radiation pattern D. both A and B

Description : Stacking elements in a transmitting antenna system A. increases the field strength at the receiving antenna B. increases the directivity of the transmitter antenna C. decrease the size of the lobe in the radiation pattern D. both A and B

Last Answer : D. both A and B

Designed to receive a signal from a transmitting station on the ground and retransmit it to a receiving station located elsewhere A. Communication satellite B. Repeater C. Relay station D. Transponder

Description : Designed to receive a signal from a transmitting station on the ground and retransmit it to a receiving station located elsewhere A. Communication satellite B. Repeater C. Relay station D. Transponder

Last Answer : A. Communication satellite

What is the resultant field strength at the receiving antenna in space wave propagation under case 2? A. 0 B. ξd C. 2ξd D. 3ξd

Description : What is the resultant field strength at the receiving antenna in space wave propagation under case 2? A. 0 B. ξd C. 2ξd D. 3ξd

Last Answer : C. 2ξd

What is a selective fading effect? A. A fading effect caused by small changes in beam heading at the receiving station. B. A fading effect caused by phase differences between radio wave components of the same transmission, as experienced at the receiving station. C. A fading effect caused by large changes in the height of the ionosphere, as experienced at the receiving station D. A fading effect caused by time differences between the receiving and transmitting stations.

Description : What is a selective fading effect? A. A fading effect caused by small changes in beam heading at the receiving station. B. A fading effect caused by phase differences between radio wave ... station D. A fading effect caused by time differences between the receiving and transmitting stations.

Last Answer : B. A fading effect caused by phase differences between radio wave components of the same transmission, as experienced at the receiving station.

What is the major cause of selective fading? A. Small changes in the beam heading at the receiving station. B. Large changes in the height of the ionosphere, as experience at the receiving station. C. Time differences between the receiving and transmitting stations. D. Phase differences between radio wave components of the same transmission, as experienced at the receiving station.

Description : What is the major cause of selective fading? A. Small changes in the beam heading at the receiving station. B. Large changes in the height of the ionosphere, as experience at the ... Phase differences between radio wave components of the same transmission, as experienced at the receiving station.

Last Answer : D. Phase differences between radio wave components of the same transmission, as experienced at the receiving station.

Refers to an effect of selective fading. A. A fading effect caused by phase differences between radio wave components of the same transmission, as experienced at the receiving station. B. A fading effect caused by small changes in beam heading at the receiving station. C. A fading effect caused by the time differences between the receiving and transmitting stations. D. A fading effect caused by large changes in the height of the ionosphere, as experienced at the receiving station.

Description : Refers to an effect of selective fading. A. A fading effect caused by phase differences between radio wave components of the same transmission, as experienced at the receiving station. B. A fading ... caused by large changes in the height of the ionosphere, as experienced at the receiving station.

Last Answer : A. A fading effect caused by phase differences between radio wave components of the same transmission, as experienced at the receiving station.

Space diversity transmission means transmitting and receiving on _______. A. Two or more antennas operating on two different frequencies B. Two or more identical frequencies C. Two or more antennas operating on the same frequency D. Two or more different frequency

Description : Space diversity transmission means transmitting and receiving on _______. A. Two or more antennas operating on two different frequencies B. Two or more identical frequencies C. Two or more antennas operating on the same frequency D. Two or more different frequency

Last Answer : C. Two or more antennas operating on the same frequency

Space diversity transmission means transmitting and receiving on A. two or more antennas operating on two different frequencies B. two or more identical frequencies C. two or more different frequencies D. two or more antennas operating on the same frequencies

Description : Space diversity transmission means transmitting and receiving on A. two or more antennas operating on two different frequencies B. two or more identical frequencies C. two or more different frequencies D. two or more antennas operating on the same frequencies

Last Answer : D. two or more antennas operating on the same frequencies

What is the maximum line-of-sight distance between a paging antenna 250 ft high and a pager receiver 3.5ft of the ground? A. 25 km B.25mi C. 70.73 km D. 70.73 mi

Description : What is the maximum line-of-sight distance between a paging antenna 250 ft high and a pager receiver 3.5ft of the ground? A. 25 km B.25mi C. 70.73 km D. 70.73 mi

Last Answer : B.25mi

______ is known to be the first satellite capable of receiving and transmitting simultaneously. A. Syncom I B. Telstar I C. Score D. Aguila

Description : ______ is known to be the first satellite capable of receiving and transmitting simultaneously. A. Syncom I B. Telstar I C. Score D. Aguila

Last Answer : B. Telstar I

If 4 kW in antenna produces 50 μV/m in a receiving antenna, a 15 kW will produce _____. A. 200 μV/m B. 10 μV/m C. 100 μV/m D. 20 μV/m

Description : If 4 kW in antenna produces 50 μV/m in a receiving antenna, a 15 kW will produce _____. A. 200 μV/m B. 10 μV/m C. 100 μV/m D. 20 μV/m

Last Answer : C. 100 μV/m

Electromagnetic wave travel at __________ in free space. A. 300,000 km/sec B. 100,000 km/ sec C. 400,000 km/sec D. 200km/sec

Description : Electromagnetic wave travel at __________ in free space. A. 300,000 km/sec B. 100,000 km/ sec C. 400,000 km/sec D. 200km/sec

Last Answer : A. 300,000 km/sec

What radar component permits the use of a single antenna for both transmitting and receiving?

Description : What radar component permits the use of a single antenna for both transmitting and receiving?

Last Answer : Duplexer.

The various properties of a transmitting antenna can apply equally to the same antenna when it is used as a receiving antenna. What term is used for this property?

Description : The various properties of a transmitting antenna can apply equally to the same antenna when it is used as a receiving antenna. What term is used for this property?

Last Answer : Reciprocity of antennas.

A one-quarter wavelength shunt-fed vertical Marconi antenna A. has maximum radiation in a vertical direction B. must have a horizontal receiving antenna for the best reception C. must use a receiving antenna for the best reception D. must have a vertical receiving antenna for the best reception

Description : A one-quarter wavelength shunt-fed vertical Marconi antenna A. has maximum radiation in a vertical direction B. must have a horizontal receiving antenna for the best reception C. must use a receiving antenna for the best reception D. must have a vertical receiving antenna for the best reception

Last Answer : D. must have a vertical receiving antenna for the best reception

When the elevation angle of a geostationary satellite is 23˚ and the transmitting frequency is 3840 MHz, what is the free space loss in dB? A. 196 dB B. 200 dB C. 150 dB D. 100 dB

Description : When the elevation angle of a geostationary satellite is 23˚ and the transmitting frequency is 3840 MHz, what is the free space loss in dB? A. 196 dB B. 200 dB C. 150 dB D. 100 dB

Last Answer : A. 196 dB

What is a dummy antenna? A. One which is used as a reference for gain measurements B. And antenna used for hand-held radio C. An non-directional transmitting antenna D. A non-radiating load for a transmitter used for testing

Description : What is a dummy antenna? A. One which is used as a reference for gain measurements B. And antenna used for hand-held radio C. An non-directional transmitting antenna D. A non-radiating load for a transmitter used for testing

Last Answer : D. A non-radiating load for a transmitter used for testing

The angle of elevation of the antenna beam is 20°. Calculate the transmission-path distance for an ionospheric transmission that utilizes a layer of virtual height 200 km. Use flat-earth approximation. A. 966 km B. 2100 km C. 1100 km D. 405 km

Description : The angle of elevation of the antenna beam is 20°. Calculate the transmission-path distance for an ionospheric transmission that utilizes a layer of virtual height 200 km. Use flat-earth approximation. A. 966 km B. 2100 km C. 1100 km D. 405 km

Last Answer : C. 1100 km

Find the speed and average speed of a bus which leaves salem at 4 p.m. and reaches madurai in the same day at 8 p.m. The distance between the two stations is 216 km and the total time for stoppage is 1 hour between these stations. a) 54,72 b) 62,84 c) 72,54 d) 82,64

Description :  Find the speed and average speed of a bus which leaves salem at 4 p.m. and reaches madurai in the same day at 8 p.m. The distance between the two stations is 216 km and the total time for stoppage is 1 hour between these stations. a) 54,72 b) 62,84 c) 72,54 d) 82,64

Last Answer : C Total time taken = 4 hours; Time of stoppage = 1 hour, that is, actual time taken = 4 hours - 1 hours = 3 hours Speed = Distance/Time = 216/3 = 72 km/hr Average speed = Total Distance/ Total Time = 216/4 = 54 km/hr

Part of a microwave link can be approximated by free space conditions. The antenna gain are each 40 dB, the frequency is 10 GHz, and the path length is 80 km. Calculate the receive power for a transmitted power of 10 W? A. 0.871 μW B. 871 μW C. 0.871 mW D. 871 nW

Description : Part of a microwave link can be approximated by free space conditions. The antenna gain are each 40 dB, the frequency is 10 GHz, and the path length is 80 km. Calculate the receive power for a transmitted power of 10 W? A. 0.871 μW B. 871 μW C. 0.871 mW D. 871 nW

Last Answer : A. 0.871 μW

A radio communications link is to be established via the ionosphere. The maximum virtual height of the layer is 100 km at the midpoint of the path and the critical frequency is 2 MHz. The distance between stations is 600 km. determine the optimum working frequency? A. 6.32 MHz B. 2.1 MHz C. 5.4 MHz D. 1.8 MHz

Description : A radio communications link is to be established via the ionosphere. The maximum virtual height of the layer is 100 km at the midpoint of the path and the critical frequency is 2 MHz. The distance between stations is 600 ... optimum working frequency? A. 6.32 MHz B. 2.1 MHz C. 5.4 MHz D. 1.8 MHz

Last Answer : C. 5.4 MHz

The rhombic antenna is primarily used for A. ground wave propagation B. space wave propagation C. ionosphere scatter propagation D. sky wave propagation

Description : The rhombic antenna is primarily used for A. ground wave propagation B. space wave propagation C. ionosphere scatter propagation D. sky wave propagation

Last Answer : D. sky wave propagation

One of the following is very useful as a multiband HF receiving antenna. A. Parabolic antenna B. Elementary doublet C. Log-periodic D. Square loop

Description : One of the following is very useful as a multiband HF receiving antenna. A. Parabolic antenna B. Elementary doublet C. Log-periodic D. Square loop

Last Answer : C. Log-periodic

Determine the dB gain of a receiving antenna which delivers a microvolt signal to a transmission line over that of an antenna that delivers a 20 microvolt signal under identical circumstances. A. 10 dB B. 6 dB C. 3 dB D. 8 dB

Description : Determine the dB gain of a receiving antenna which delivers a microvolt signal to a transmission line over that of an antenna that delivers a 20 microvolt signal under identical circumstances. A. 10 dB B. 6 dB C. 3 dB D. 8 dB

Last Answer : B. 6 dB

What is the maximum theoretical data rate of the above problem if one transponder is used for binary transmission? A. 36 Mbps B. 72 Mbps C.18 Mbps D. 144 Mbps

Description : What is the maximum theoretical data rate of the above problem if one transponder is used for binary transmission? A. 36 Mbps B. 72 Mbps C.18 Mbps D. 144 Mbps

Last Answer : B. 72 Mbps

In radio-communication, the signals emitted by transmitting antenna are reflected on – (1) stratosphere (2) ozonosphere (3) ionosphere (4) troposphere

Description : In radio-communication, the signals emitted by transmitting antenna are reflected on – (1) stratosphere (2) ozonosphere (3) ionosphere (4) troposphere

Last Answer : (3) ionosphere Explanation: The lower atmosphere is more or less transparent to radio waves. However, the ionosphere reflects back the radio waves. Thus, a signal emitted by an antenna from a ... on the surface of Earth in the following two ways: ground wave propagation and sky wave propagation.

In Radio Communication, the signals emitted by transmitting antenna are reflected on

Description : In Radio Communication, the signals emitted by transmitting antenna are reflected on

Last Answer : Ionosphere

In radio-communication, the signals emitted by transmitting antenna are reflected on (1) stratosphere(2) ozonosphere (3) ionosphere (4) troposphere

Description : In radio-communication, the signals emitted by transmitting antenna are reflected on (1) stratosphere(2) ozonosphere (3) ionosphere (4) troposphere

Last Answer : ionosphere

ECE Board Exam November 1996 What is the applied power if a thermal RF wattmeter is connected to a transmitter through a variable attenuator? The wattmeter reads 84 mW when 15 dB of attenuation is used. A. 4.656 watts B. 2.656 watts C. 3.656 watts D. 2.856 watts

Description : ECE Board Exam November 1996 What is the applied power if a thermal RF wattmeter is connected to a transmitter through a variable attenuator? The wattmeter reads 84 mW when 15 dB of attenuation is used. A. 4.656 watts B. 2.656 watts C. 3.656 watts D. 2.856 watts

Last Answer : B. 2.656 watts

ECE Board Exam November 1996 What is the applied power if a thermal RF wattmeter is connected to a transmitter through a variable attenuator? The wattmeter reads 84 mW when 15 dB of attenuation is used. A. 4.656 watts B. 2.656 watts C. 3.656 watts D. 2.856 watts

Description : ECE Board Exam November 1996 What is the applied power if a thermal RF wattmeter is connected to a transmitter through a variable attenuator? The wattmeter reads 84 mW when 15 dB of attenuation is used. A. 4.656 watts B. 2.656 watts C. 3.656 watts D. 2.856 watts

Last Answer : A. PAM

If a carrier wave of 1000 kHz is used to carry the signal, the length of transmitting antenna will be equal to _______. (1) 300 m (2) 30 m (3) 3 m (4) 0.3 m

Description : If a carrier wave of 1000 kHz is used to carry the signal, the length of transmitting antenna will be equal to _______. (1) 300 m (2) 30 m (3) 3 m (4) 0.3 m

Last Answer : (1) 300 m Explanation: h = 3 × 108/106 = 300 m

At the ends of a half-wave antenna, what values of current and voltage exist compared to the remainder of the antenna? A. Minimum voltage and minimum current B. Equal voltage and current C. Minimum voltage and maximum current D. Maximum voltage and minimum current.

Description : At the ends of a half-wave antenna, what values of current and voltage exist compared to the remainder of the antenna? A. Minimum voltage and minimum current B. Equal voltage and current C. Minimum voltage and maximum current D. Maximum voltage and minimum current.

Last Answer : D. Maximum voltage and minimum current.

The input terminal impedance at the center of a folded dipole antenna is A. 72 Ω B. 300 Ω C. 50 Ω D. 73 Ω

Description : The input terminal impedance at the center of a folded dipole antenna is A. 72 Ω B. 300 Ω C. 50 Ω D. 73 Ω

Last Answer : B. 300 Ω

What is the input terminal impedance at the center if a folded dipole antenna? A. 300 ohms B. 72 ohms C. 50 ohms D. 450 ohms

Description : What is the input terminal impedance at the center if a folded dipole antenna? A. 300 ohms B. 72 ohms C. 50 ohms D. 450 ohms

Last Answer : A. 300 ohms

How far away is the radio horizon of an antenna 100ft high? A. 14.14 mi B. 40km C. 14.14 km D. 40 mi

Description : How far away is the radio horizon of an antenna 100ft high? A. 14.14 mi B. 40km C. 14.14 km D. 40 mi

Last Answer : A. 14.14 mi

What is the gain of the Hertzian dipole over isotropic antenna? A. 1.64 dB B. 2.15 dB C. 1.76 dB D. 1.55 dB

Description : What is the gain of the Hertzian dipole over isotropic antenna? A. 1.64 dB B. 2.15 dB C. 1.76 dB D. 1.55 dB

Last Answer : C. 1.76 dB

If the length of an antenna is changed from 2.5 meters to 2.8 meters, its resonant frequency will A. increase B. depend on the velocity factor so the resonant frequency can either be increased or decreased C. will be unchanged D. decrease

Description : If the length of an antenna is changed from 2.5 meters to 2.8 meters, its resonant frequency will A. increase B. depend on the velocity factor so the resonant frequency can either be increased or decreased C. will be unchanged D. decrease

Last Answer : D. decrease

A transmitted signal 5 meters in wavelength is received by an antenna coil having a 50-Ω resistance and a 0.01 H inductance. What is the capacitance of the tuner shunting the antenna coil at this point? A. 0.704 fF B. 0.704 μF C. 0.704 nF D. 0.704 mF

Description : A transmitted signal 5 meters in wavelength is received by an antenna coil having a 50-Ω resistance and a 0.01 H inductance. What is the capacitance of the tuner shunting the antenna coil at this point? A. 0.704 fF B. 0.704 μF C. 0.704 nF D. 0.704 mF

Last Answer : A. 0.704 fF

Refers to one of the front end circuit of a VHF TV superheterodyne receiver which is usually a separate circuit coupled to the mixer. A. Antenna feed B. AGC C. RF amplifier D. Local oscillator

Description : Refers to one of the front end circuit of a VHF TV superheterodyne receiver which is usually a separate circuit coupled to the mixer. A. Antenna feed B. AGC C. RF amplifier D. Local oscillator

Last Answer : D. Local oscillator

A device that converts high frequency current into electromagnetic wave. A. Antenna B. Loudspeaker C. Microphone D. Transducer

Description : A device that converts high frequency current into electromagnetic wave. A. Antenna B. Loudspeaker C. Microphone D. Transducer

Last Answer : A. Antenna

A satellite transmitter operates at 4GHz with an antenna gain of 4dBi. The receiver 40000 km away has an antenna gain of 50 dBi. If the transmitter has a power of 8 W, find (ignoring feedline losses and mismatch) the EIRP in dBW. A. 50 B. 69 C. 49 D. 30

Description : A satellite transmitter operates at 4GHz with an antenna gain of 4dBi. The receiver 40000 km away has an antenna gain of 50 dBi. If the transmitter has a power of 8 W, find (ignoring feedline losses and mismatch) the EIRP in dBW. A. 50 B. 69 C. 49 D. 30

Last Answer : C. 49

Permitted wind velocity for running of trains on the bridge a) 72 km/h* b) 58 km/h c) 64 km/h d) No limits

Description : Permitted wind velocity for running of trains on the bridge a) 72 km/h* b) 58 km/h c) 64 km/h d) No limits

Last Answer : a) 72 km/h*

A bus can travel 25% faster than a jeep. Both start from point P at the same time and reach point Q, 225 kms away from P, at the same time. On the way, however, the bus lost about 37.5 minutes while stopping at the certain place. What is the speed of the jeep? a) 64 km/hr b) 72 km/hr c) 68 km/hr d) 56 km/hr

Description : A bus can travel 25% faster than a jeep. Both start from point P at the same time and reach point Q, 225 kms away from P, at the same time. On the way, however, the bus lost about 37.5 minutes while stopping at the ... is the speed of the jeep? a) 64 km/hr b) 72 km/hr c) 68 km/hr d) 56 km/hr

Last Answer : B Let speed of the jeep =x kmph Then, speed of the bus =(100+25)x/100 =125x/100 =5x/4 kmph Time taken by the jeep to travel from P to Q =225/x hours Time taken by the bus to travel from p to Q =225/(5x/4) + ... 225/x=900/5x+37.5/60 225/x=180/x+37.5/60 45/x =37.5/60 37.5x=45*60 X=72 km/hr

What is the end impedance of a half-wave dipole? A. 73 Ω B. 72 Ω C. 250 Ω D. 2500 Ω

Description : What is the end impedance of a half-wave dipole? A. 73 Ω B. 72 Ω C. 250 Ω D. 2500 Ω

Last Answer : D. 2500 Ω

When the polarisation of the receiving antenna is unknown, to ensure that it receives atleast half the power, the transmitted wave should be a) Linearly polarised b) Elliptically polarised c) Circularly polarised d) Normally polarised

Description : When the polarisation of the receiving antenna is unknown, to ensure that it receives atleast half the power, the transmitted wave should be a) Linearly polarised b) Elliptically polarised c) Circularly polarised d) Normally polarised

Last Answer : c) Circularly polarised