What is the term used in telephony and telegraphy for irregular disturbing radiation due to various causes and in a particular produced by arc transmitters causing a rushing sound in receiving telephones? A. Fax tone B. Mush C. Hiss D. Crosstalk

What is the term used in telephony and telegraphy for irregular disturbing radiation due
to various causes and in a particular produced by arc transmitters causing a rushing sound
in receiving telephones?
A. Fax tone
B. Mush
C. Hiss
D. Crosstalk
by

1 Answer

Answer :

B. Mush
by

Related questions

ECE Board Exam March 1996 Crosstalk coupling is ___________. A. dBm (disturbing pair) minus dBm (disturbed pair) B. the difference between readings on a cable pair with a tone and a cable pair without tone read at the far end of a cable C. signals from one circuit that get into another circuit D. All of these are true

Description : ECE Board Exam March 1996 Crosstalk coupling is ___________. A. dBm (disturbing pair) minus dBm (disturbed pair) B. the difference between readings on a cable pair with a tone and a cable pair without ... a cable C. signals from one circuit that get into another circuit D. All of these are true

Last Answer : D. All of these are true

A reading of -50 dBm on the disturbing pair, and -80 on the disturbed pair equals _____ dB of crosstalk coupling. A. 20 B. 30 C. 60 D. 25

Description : A reading of -50 dBm on the disturbing pair, and -80 on the disturbed pair equals _____ dB of crosstalk coupling. A. 20 B. 30 C. 60 D. 25

Last Answer : B. 30

ECE Board Exam March 1996 The modulation system used for telegraphy is A. frequency-shift keying B. two-tone modulation C. pulse-code modulation D. single-tone modulation

Description : ECE Board Exam March 1996 The modulation system used for telegraphy is A. frequency-shift keying B. two-tone modulation C. pulse-code modulation D. single-tone modulation

Last Answer : A. frequency-shift keying

Noise that occurs via capacitive or inductive coupling in a cable. A. Crosstalk B. Quantizing noise C. Reference noise D. Tone interference

Description : Noise that occurs via capacitive or inductive coupling in a cable. A. Crosstalk B. Quantizing noise C. Reference noise D. Tone interference

Last Answer : A. Crosstalk

Noise consisting of irregular pulses of short duration and relatively high amplitude, A. Quantizing noise B. Tone interference C. Impulse noise D. Cross talk

Description : Noise consisting of irregular pulses of short duration and relatively high amplitude, A. Quantizing noise B. Tone interference C. Impulse noise D. Cross talk

Last Answer : C. Impulse noise

Noise consisting of irregular pulses of short duration and relatively high amplitude, A. Quantizing noise B. Tone interference C. Impulse noise D. Cross talk

Description : Noise consisting of irregular pulses of short duration and relatively high amplitude, A. Quantizing noise B. Tone interference C. Impulse noise D. Cross talk

Last Answer : A. Quantizing noise

Crosstalk due to incomplete suppression of sidebands or to intermodulation of two or more frequency-multiplexed channels which is unintelligible is classified as A. Impulse noise B. Thermal noise C. Quantizing noise D. Miscellaneous noise

Description : Crosstalk due to incomplete suppression of sidebands or to intermodulation of two or more frequency-multiplexed channels which is unintelligible is classified as A. Impulse noise B. Thermal noise C. Quantizing noise D. Miscellaneous noise

Last Answer : D. Miscellaneous noise

Sources of impulse noise induced in communication channels. A. Erroneous digital coding bit caused by an error on a transmission facility B. Transients due to relay operation C. Crosstalk from dc signaling systems D. All of these

Description : Sources of impulse noise induced in communication channels. A. Erroneous digital coding bit caused by an error on a transmission facility B. Transients due to relay operation C. Crosstalk from dc signaling systems D. All of these

Last Answer : D. All of these

An interfering current in a telegraph or signaling channel due to telegraph or signaling current by another channel. A. Crosstalk B. Noise current C. Crossfire D. Intermodulation

Description : An interfering current in a telegraph or signaling channel due to telegraph or signaling current by another channel. A. Crosstalk B. Noise current C. Crossfire D. Intermodulation

Last Answer : C. Crossfire

One of the following is not among the major components required on board ship under the global maritime distress and safety system. A. On board radio facilities B. Radio operator telegraphy onboard C. Shore base facilities D. Radio personnel on board

Description : One of the following is not among the major components required on board ship under the global maritime distress and safety system. A. On board radio facilities B. Radio operator telegraphy onboard C. Shore base facilities D. Radio personnel on board

Last Answer : B. Radio operator telegraphy onboard

How many NFL players have had 1,000 yards rushing and receiving in the same season?

Description : How many NFL players have had 1,000 yards rushing and receiving in the same season?

Last Answer : Just three: Roger Craig, Marshall Faulk, and Christian McCaffrey.Most recently, McCaffrey inched over the 1,000-yard receiving mark in the Panthers’ final game of the 2019 season†he finished the year with 1, ... often lining up at receiver.The first to do it was Craig on the 1985 49ers. Like Mc

How many NFL players have had 1,000 yards rushing and receiving in the same season?

Description : How many NFL players have had 1,000 yards rushing and receiving in the same season?

Last Answer : Just three: Roger Craig, Marshall Faulk, and Christian McCaffrey.Most recently, McCaffrey inched over the 1,000-yard receiving mark in the Panthers’ final game of the 2019 season†he finished the year with 1, ... often lining up at receiver.The first to do it was Craig on the 1985 49ers. Like Mc

Stacking elements in a transmitting antenna system A. increases the field strength at the receiving antenna B. increases the directivity of the transmitter antenna C. decrease the size of the lobe in the radiation pattern D. both A and B

Description : Stacking elements in a transmitting antenna system A. increases the field strength at the receiving antenna B. increases the directivity of the transmitter antenna C. decrease the size of the lobe in the radiation pattern D. both A and B

Last Answer : D. both A and B

A one-quarter wavelength shunt-fed vertical Marconi antenna A. has maximum radiation in a vertical direction B. must have a horizontal receiving antenna for the best reception C. must use a receiving antenna for the best reception D. must have a vertical receiving antenna for the best reception

Description : A one-quarter wavelength shunt-fed vertical Marconi antenna A. has maximum radiation in a vertical direction B. must have a horizontal receiving antenna for the best reception C. must use a receiving antenna for the best reception D. must have a vertical receiving antenna for the best reception

Last Answer : D. must have a vertical receiving antenna for the best reception

Noise occurring in the presence of signal resulting from a mismatch between the exact value of an analog signal and the closet available quantizing step in a digital coder. A. Quantizing noise B. Thermal noise C. Impulse noise D. Crosstalk

Description : Noise occurring in the presence of signal resulting from a mismatch between the exact value of an analog signal and the closet available quantizing step in a digital coder. A. Quantizing noise B. Thermal noise C. Impulse noise D. Crosstalk

Last Answer : A. Quantizing noise

Is the interference coming from other communications channels? A. Jitter B. Crosstalk C. RFI D. EMI

Description : Is the interference coming from other communications channels? A. Jitter B. Crosstalk C. RFI D. EMI

Last Answer : B. Crosstalk

Which standard recommends crosstalk limits? A. CCIT G.152 B. CCIT G.150 C. CCIT G.151 D. CCIT G.161

Description : Which standard recommends crosstalk limits? A. CCIT G.152 B. CCIT G.150 C. CCIT G.151 D. CCIT G.161

Last Answer : C. CCIT G.151

In measuring crosstalk using dBx unit the reference power is A. 1 mW B. 1 W C. 1 pW D. 6 mW

Description : In measuring crosstalk using dBx unit the reference power is A. 1 mW B. 1 W C. 1 pW D. 6 mW

Last Answer : C. 1 pW

Best describe as an amplifier used in radio telephony. A. Magnifier B. Class B C. Class C D. Class A

Description : Best describe as an amplifier used in radio telephony. A. Magnifier B. Class B C. Class C D. Class A

Last Answer : C. Class C

Technical study which deals with production, transport and delivery of a quality signal from source to destination. A. Transmission system engineering B. Communication system engineering C. Telephony engineering D. Telegraphic engineering

Description : Technical study which deals with production, transport and delivery of a quality signal from source to destination. A. Transmission system engineering B. Communication system engineering C. Telephony engineering D. Telegraphic engineering

Last Answer : A. Transmission system engineering

Which of the following is designated as the international distress, safety and calling frequency for radio telephony for stations of the maritime mobile service when using frequencies in the authorized bands between 156 and 174 MHz? A. 165.8 MHz B. 156.8 MHz C. 158.6 MHz D. 168.5 MHz

Description : Which of the following is designated as the international distress, safety and calling frequency for radio telephony for stations of the maritime mobile service when using frequencies in the authorized bands between 156 and 174 MHz? A. 165.8 MHz B. 156.8 MHz C. 158.6 MHz D. 168.5 MHz

Last Answer : B. 156.8 MHz

Which of the following terms refers to a muscular, cramp-like pain in the extremities consistently reproduced with the same degree of exercise and relieved by rest? a) Intermittent claudication Intermittent claudication is a sign of peripheral arterial insufficiency. b) Aneurysm An aneurysm is a localized sac of an artery wall formed at a weak point in the vessel. c) Bruit A bruit is the sound produced by turbulent blood flow through an irregular, tortuous, stenotic, or dilated vessel. d) Ischemia Ischemia is a term used to denote deficient blood supply.

Description : Which of the following terms refers to a muscular, cramp-like pain in the extremities consistently reproduced with the same degree of exercise and relieved by rest? a) Intermittent claudication Intermittent ... or dilated vessel. d) Ischemia Ischemia is a term used to denote deficient blood supply.

Last Answer : a) Intermittent claudication Intermittent claudication is a sign of peripheral arterial insufficiency.

What is the process of cancelling the effect on internal device capacitance in radio transmitters? A. Degaussing B. Neutralization C. Ionization D. Stabilization

Description : What is the process of cancelling the effect on internal device capacitance in radio transmitters? A. Degaussing B. Neutralization C. Ionization D. Stabilization

Last Answer : B. Neutralization

Why are frequency modulation transmitters more efficient? A. Because their power is increased by class C amplifiers B. Because their power is increased by class A amplifiers C. Because their power is increased by class B amplifiers D. Because their power is increased by class AB amplifiers

Description : Why are frequency modulation transmitters more efficient? A. Because their power is increased by class C amplifiers B. Because their power is increased by class A amplifiers C. Because their power is increased by class B amplifiers D. Because their power is increased by class AB amplifiers

Last Answer : A. Because their power is increased by class C amplifiers

When measuring a transmitter’s frequency against a suitable standard, the frequency to be measured is taken from the A. oscillator stage B. intermediate amplifier C. buffer stage D. final RF stage

Description : When measuring a transmitter’s frequency against a suitable standard, the frequency to be measured is taken from the A. oscillator stage B. intermediate amplifier C. buffer stage D. final RF stage

Last Answer : D. final RF stage

How can intermodulation interference between two transmitters in close proximity reduced or eliminated? A. Through installing a band-pass filter in the antenna feed line B. Through installing terminated circulator or ferrite isolator in the feed line of the transmitter and duplexer C. By using a class C final amplifier with high driving power D. By installing a low-pass filter in the antenna feed line

Description : How can intermodulation interference between two transmitters in close proximity reduced or eliminated? A. Through installing a band-pass filter in the antenna feed line B. Through installing terminated circulator ... high driving power D. By installing a low-pass filter in the antenna feed line

Last Answer : A. Through installing a band-pass filter in the antenna feed line

What is considered as the most advanced satellite system developed for cellular telephones? A. Iridium B. Globalstar C. ANIK D. Molniya

Description : What is considered as the most advanced satellite system developed for cellular telephones? A. Iridium B. Globalstar C. ANIK D. Molniya

Last Answer : A. Iridium

Has anyone ever had a hiss sound and pressure in the ears from tmj?

Description : Has anyone ever had a hiss sound and pressure in the ears from tmj?

Last Answer : answer:@VikR105 - We've talked about this previously. Schedule a checkup with your dentist and have the TMJ checked by them. You could ask them to refer you to a TMJ specialist. Did your ... Support Group in your area. ATA.org lists support groups and is a valuable resource for tinnitus sufferers.

My fax software is "iffy", i.e., sometimes I'll get a fax, sometimes I get "An error occurred while receiving the fax". What to do?

Description : My fax software is "iffy", i.e., sometimes I'll get a fax, sometimes I get "An error occurred while receiving the fax". What to do?

Last Answer : Have you checked for software upgrades?

A money order received but loss before payment a) The postmaster should then give an intimation to the office of issue by telegraph/fax b) After receiving the intimation the office of issue will prepare duplicate MO in MO 57 and forward to office of payment by service regd post c) A report regarding the issue of a duplicate money order should be made to the home postal account office. d) All the above

Description : A money order received but loss before payment a) The postmaster should then give an intimation to the office of issue by telegraph/fax b) After receiving the intimation the office of issue will prepare ... a duplicate money order should be made to the home postal account office. d) All the above

Last Answer : d) All the above

Which of the following is one of the possible causes for a slow drift of frequency in a self exited transmitter oscillator circuits resulting to a poor frequency stability? A. Poor soldered connections B. Power supply voltage changes C. Loose connections in the oscillator, amplifier, or antenna circuits D. DC and RF heating of resistors, causing then to change values.

Description : Which of the following is one of the possible causes for a slow drift of frequency in a self exited transmitter oscillator circuits resulting to a poor frequency stability? A. Poor soldered connections ... , or antenna circuits D. DC and RF heating of resistors, causing then to change values.

Last Answer : D. DC and RF heating of resistors, causing then to change values.

What is the non-continuous noise of irregular pulses or spikes of duration with high amplitudes? A. Wander B. Jitter C. Hits D. Singing

Description : What is the non-continuous noise of irregular pulses or spikes of duration with high amplitudes? A. Wander B. Jitter C. Hits D. Singing

Last Answer : B. Jitter

What causes the maximum usable frequency to vary? A. The temperature of the ionosphere B. The speed of the winds in the upper atmosphere C. The type of weather just below the ionosphere D. The amount of radiation received from the sun

Description : What causes the maximum usable frequency to vary? A. The temperature of the ionosphere B. The speed of the winds in the upper atmosphere C. The type of weather just below the ionosphere D. The amount of radiation received from the sun

Last Answer : D. The amount of radiation received from the sun

Side tone is the speech heard by (A) the receiving subscriber (B) both the receiving and calling subscriber (C) by on looker (D) by calling subscriber

Description : Side tone is the speech heard by (A) the receiving subscriber (B) both the receiving and calling subscriber (C) by on looker (D) by calling subscriber

Last Answer : (D) by calling subscriber

When an electric bulb breaks, there is a mild bang due to (a) the chemical reaction between the enclosed gases (b) the compressed gases rushing out suddenly (c) the air rushing in to fill the evacuated space (d) some other unknown reason

Description : When an electric bulb breaks, there is a mild bang due to (a) the chemical reaction between the enclosed gases (b) the compressed gases rushing out suddenly (c) the air rushing in to fill the evacuated space (d) some other unknown reason

Last Answer : Ans:(c)

Could my birth control be causing my irregular periods?

Description : Could my birth control be causing my irregular periods?

Last Answer : Irregular periods are common on the pill.

The quality or tone of a musical sound produced by a stringed instrument depends on – (1) frequency of vibration (2) length of the strings in the instrument (3) Amplitude of vibration (4) wave form of the sound

Description : The quality or tone of a musical sound produced by a stringed instrument depends on – (1) frequency of vibration (2) length of the strings in the instrument (3) Amplitude of vibration (4) wave form of the sound

Last Answer : (4) wave form of the sound Explanation: The timbre or quality of a sound depends on its wave form, which varies with the number of over-tones, or harmonics, that are present, their ... particular musical sound have a different sound from another, even when they have the same pitch and loudness.

The quality or tone of a musical sound produced by a stringed instrument depends on (1) frequency of vibration (2) length of the strings in the instrument (3) Amplitude of vibration (4) wave form of the sound

Description : The quality or tone of a musical sound produced by a stringed instrument depends on (1) frequency of vibration (2) length of the strings in the instrument (3) Amplitude of vibration (4) wave form of the sound

Last Answer : wave form of the sound

The electrical energy necessary to power a sound-powered telephone's small vibrating bell is obtained from _________. A. the emergency batteries for the general alarm B. each station's hand-cranked generator C. the emergency switchboard D. normal 115 volt DC supplies

Description : The electrical energy necessary to power a sound-powered telephone's small vibrating bell is obtained from _________. A. the emergency batteries for the general alarm B. each station's hand-cranked generator C. the emergency switchboard D. normal 115 volt DC supplies

Last Answer : Answer: B

The various properties of a transmitting antenna can apply equally to the same antenna when it is used as a receiving antenna. What term is used for this property?

Description : The various properties of a transmitting antenna can apply equally to the same antenna when it is used as a receiving antenna. What term is used for this property?

Last Answer : Reciprocity of antennas.

What is the term for the ration of the radiation resistance of an antenna to the total resistance of the system? A. Effective radiated power B. Beamwidth C. Radiation conversion loss D. Antenna efficiency

Description : What is the term for the ration of the radiation resistance of an antenna to the total resistance of the system? A. Effective radiated power B. Beamwidth C. Radiation conversion loss D. Antenna efficiency

Last Answer : D. Antenna efficiency

What is meant by the term radiation resistance for an antenna? A. The resistance in the trap coils to received signal B. An equivalent resistance that would dissipate the same amount of power as that radiated from an antenna C. The specific impedance of the antenna D. Losses in the antenna elements and feed line

Description : What is meant by the term radiation resistance for an antenna? A. The resistance in the trap coils to received signal B. An equivalent resistance that would dissipate the same amount of power as ... antenna C. The specific impedance of the antenna D. Losses in the antenna elements and feed line

Last Answer : B. An equivalent resistance that would dissipate the same amount of power as that radiated from an antenna

What is meant by the term antenna bandwidth A. Antenna length divided by the number of elements. B. The angle between the half-power radiation points C. The frequency range over which and antenna can be expected to perform well D. The angle formed between two imaginary line drawn through the ends of the elements

Description : What is meant by the term antenna bandwidth A. Antenna length divided by the number of elements. B. The angle between the half-power radiation points C. The frequency range over which and antenna ... perform well D. The angle formed between two imaginary line drawn through the ends of the elements

Last Answer : C. The frequency range over which and antenna can be expected to perform well

What is meant by the term antenna efficiency? A. Efficiency = effective radiated power/transmitter output x 100% B. Efficiency = radiation resistance/ transmission resistance C. Efficiency = total resistance/radiation resistance x 100% D. Efficiency = radiation resistance/total resistance x 100%

Description : What is meant by the term antenna efficiency? A. Efficiency = effective radiated power/transmitter output x 100% B. Efficiency = radiation resistance/ transmission resistance C. Efficiency = total resistance/radiation resistance x 100% D. Efficiency = radiation resistance/total resistance x 100%

Last Answer : D. Efficiency = radiation resistance/total resistance x 100%

What is the reference tone level for dBa? A. -90 dBm B. -82 dBm C. -67 dBm D. -85 dBm

Description : What is the reference tone level for dBa? A. -90 dBm B. -82 dBm C. -67 dBm D. -85 dBm

Last Answer : D. -85 dBm

What is the reference tone level for dBrn? A. -90 dBm B. -82 dBm C. -67 dBm D. -85 dBm

Description : What is the reference tone level for dBrn? A. -90 dBm B. -82 dBm C. -67 dBm D. -85 dBm

Last Answer : A. -90 dBm

Reference noise is ___________. A. a 1000 Hz, -90 dBm tone B. a noise that creates the same interfering effect as a 1000Hz, -90dBm tone C. a noise that creates zero dBrn in a voice channel D. B and C above

Description : Reference noise is ___________. A. a 1000 Hz, -90 dBm tone B. a noise that creates the same interfering effect as a 1000Hz, -90dBm tone C. a noise that creates zero dBrn in a voice channel D. B and C above

Last Answer : D. B and C above

At what power level does a 1 KHz tone cause zero interference (144 weighted)? A. 90 dB B. 90 dBm C. -90 dBm D. -90 dBm

Description : At what power level does a 1 KHz tone cause zero interference (144 weighted)? A. 90 dB B. 90 dBm C. -90 dBm D. -90 dBm

Last Answer : D. -90 dBm

What is the standard test tone used for audio measurements? A. 100 Hz B. 500 Hz C. 1000 Hz D. 2000 Hz

Description : What is the standard test tone used for audio measurements? A. 100 Hz B. 500 Hz C. 1000 Hz D. 2000 Hz

Last Answer : C. 1000 Hz

A 1 Mhz carrier is amplitude modulated by a pure 200-Hz audio test tone. Which of the following combinations of frequencies represent the total content of the AM signal? A. 1 MHz and 200 Hz B. 1 MHz and 1000.2 kHz C. 999.8 kHz, 1000 kHz, and 1000.2 kHz D. 999.8 kHz and 1000.2 kHz

Description : A 1 Mhz carrier is amplitude modulated by a pure 200-Hz audio test tone. Which of the following combinations of frequencies represent the total content of the AM signal? A. 1 MHz and 200 Hz B. 1 MHz and 1000.2 kHz C. 999.8 kHz, 1000 kHz, and 1000.2 kHz D. 999.8 kHz and 1000.2 kHz

Last Answer : C. 999.8 kHz, 1000 kHz, and 1000.2 kHz