How can multiple earth stations share a satellite on the same frequencies? A. Frequency reuse B. Multiplexing C. Mixing D. Frequency hopping

How can multiple earth stations share a satellite on the same frequencies?
A. Frequency reuse
B. Multiplexing
C. Mixing
D. Frequency hopping
by

1 Answer

Answer :

A. Frequency reuse
by

Related questions

In cellular system, _____ defines the geographic distance that is required between cells using identical frequencies in order to avoid interference between the radio transmissions at these cells. A. frequency-reuse ratio B. distance-to-reuse ratio (D/R) C. reuse format plan ratio D. reuse factor

Description : In cellular system, _____ defines the geographic distance that is required between cells using identical frequencies in order to avoid interference between the radio transmissions at these cells. A. frequency-reuse ratio B. distance-to-reuse ratio (D/R) C. reuse format plan ratio D. reuse factor

Last Answer : B. distance-to-reuse ratio (D/R)

A good example of a pilot tone system used in commercial frequency modulation stations. A. FDM B. Time division C. Stereo multiplexing D. Frequency modulation

Description : A good example of a pilot tone system used in commercial frequency modulation stations. A. FDM B. Time division C. Stereo multiplexing D. Frequency modulation

Last Answer : C. Stereo multiplexing

Which of the following is designated as the international distress, safety and calling frequency for radio telephony for stations of the maritime mobile service when using frequencies in the authorized bands between 156 and 174 MHz? A. 165.8 MHz B. 156.8 MHz C. 158.6 MHz D. 168.5 MHz

Description : Which of the following is designated as the international distress, safety and calling frequency for radio telephony for stations of the maritime mobile service when using frequencies in the authorized bands between 156 and 174 MHz? A. 165.8 MHz B. 156.8 MHz C. 158.6 MHz D. 168.5 MHz

Last Answer : B. 156.8 MHz

What term is used to describe a spread spectrum communications system in which a very fast binary bit stream is used to shift the phase of an RF carrier? A. Frequency hopping B. Direct sequence C. Binary phase-shift keying D. Phase compandored spread spectrum

Description : What term is used to describe a spread spectrum communications system in which a very fast binary bit stream is used to shift the phase of an RF carrier? A. Frequency hopping B. Direct sequence C. Binary phase-shift keying D. Phase compandored spread spectrum

Last Answer : B. Direct sequence

What is the term used to describe a spread spectrum communications system where the center frequency if a conventional carrier is altered many time per second in accordance with a pseudo-random list of channels? A. Frequency hopping B. Direct sequence C. Time-domain frequency modulation D. Frequency compandored spread spectrum

Description : What is the term used to describe a spread spectrum communications system where the center frequency if a conventional carrier is altered many time per second in accordance with a pseudo ... hopping B. Direct sequence C. Time-domain frequency modulation D. Frequency compandored spread spectrum

Last Answer : A. Frequency hopping

What is the mixing process? A. Distortion caused by auroral propagation B. The combination of two signals to produce sum and difference frequencies. C. The elimination of noise in wideband receiver by phase differentiation D. The elimination of noise in a wideband receiver by phase comparison

Description : What is the mixing process? A. Distortion caused by auroral propagation B. The combination of two signals to produce sum and difference frequencies. C. The elimination of noise in wideband receiver by phase differentiation D. The elimination of noise in a wideband receiver by phase comparison

Last Answer : B. The combination of two signals to produce sum and difference frequencies.

The round-trip propagation delay between two earth stations through a geosynchronous satellite is A. 500 to 600 ms B. 300 to 400 ms C. 600 to 700 ms D. 400 to 500 ms

Description : The round-trip propagation delay between two earth stations through a geosynchronous satellite is A. 500 to 600 ms B. 300 to 400 ms C. 600 to 700 ms D. 400 to 500 ms

Last Answer : A. 500 to 600 ms

In a typical mobile phone system with hexagonal cells, it is forbidden to reuse a frequency band in adjacent cells. If 840 frequencies are available, how many can be used in a given cell? (A) 280 (B) 210 (C) 140 (D) 120

Description : In a typical mobile phone system with hexagonal cells, it is forbidden to reuse a frequency band in adjacent cells. If 840 frequencies are available, how many can be used in a given cell? (A) 280 (B) 210 (C) 140 (D) 120

Last Answer : Answer: A Explanation: Each cell has six other adjacent cells, in a hexagonal grid. If the central cell uses frequency group A, its six adjacent cells can use B, C, B, C, B, and C respectively. In other words, only 3 unique cells are needed. So the answer is 840/3 = 280 frequencies.

Which of the following is oldest multiplexing scheme? A. Frequency Division Multiplexing (FDM) B. Time Division Multiplexing (TDM) C. Code Division Multiplexing (CDM) D. Space Division Multiplexing (SDM)

Description : Which of the following is oldest multiplexing scheme? A. Frequency Division Multiplexing (FDM) B. Time Division Multiplexing (TDM) C. Code Division Multiplexing (CDM) D. Space Division Multiplexing (SDM)

Last Answer : D. Space Division Multiplexing (SDM)

How do you transmit through multiplexing, a thousand of voice channel information over a single fiber optic using on e wavelength? A. Polar division B. Time division C. Fiber division D. Frequency division

Description : How do you transmit through multiplexing, a thousand of voice channel information over a single fiber optic using on e wavelength? A. Polar division B. Time division C. Fiber division D. Frequency division

Last Answer : B. Time division

Used for time division multiplexing. A. Frequency modulation B. Pulsed modulation C. SSB D. Amplitude modulation

Description : Used for time division multiplexing. A. Frequency modulation B. Pulsed modulation C. SSB D. Amplitude modulation

Last Answer : B. Pulsed modulation

Which frequency reuse method is less effective because of Faraday’s effect? A. Dual polarization B. Reducing antenna beamwidth C. Zonal rotation D. Spin stabilization

Description : Which frequency reuse method is less effective because of Faraday’s effect? A. Dual polarization B. Reducing antenna beamwidth C. Zonal rotation D. Spin stabilization

Last Answer : A. Dual polarization

The receive GCE system in an earth station performs what function(s)? A. Modulation and multiplexing B. Up conversion C. Demodulation and demultiplexing D. Down conversion

Description : The receive GCE system in an earth station performs what function(s)? A. Modulation and multiplexing B. Up conversion C. Demodulation and demultiplexing D. Down conversion

Last Answer : C. Demodulation and demultiplexing

While mixing sand, gravel, and cement for the foundation of a house, a worker noticed a small bird hopping along the top of the foundation wall. The bird misjudged a hop and fell down one of the holes between the blocks. The bird was down too far for anyone to reach it and the hole was too small for it to fly out of. Someone suggested using two sticks to reach down into the hole and pull the bird out, but this idea was rejected for fear it would injure the fragile bird. What would be the easiest way to get the bird out of the hole without injuring it? -Riddles

Description : While mixing sand, gravel, and cement for the foundation of a house, a worker noticed a small bird hopping along the top of the foundation wall. The bird misjudged a hop and fell down one of the holes ... . What would be the easiest way to get the bird out of the hole without injuring it? -Riddles

Last Answer : Since they had plenty of sand available, they could pour a little at a time into the hole. The bird would constantly keep shifting its position so that it stood on the rising sand.

Space diversity transmission means transmitting and receiving on _______. A. Two or more antennas operating on two different frequencies B. Two or more identical frequencies C. Two or more antennas operating on the same frequency D. Two or more different frequency

Description : Space diversity transmission means transmitting and receiving on _______. A. Two or more antennas operating on two different frequencies B. Two or more identical frequencies C. Two or more antennas operating on the same frequency D. Two or more different frequency

Last Answer : C. Two or more antennas operating on the same frequency

What is the method of diversity reception where the signal is transmitted on 2 different frequencies over the same path? A. Quadruple B. Frequency C. Polarization D. Space

Description : What is the method of diversity reception where the signal is transmitted on 2 different frequencies over the same path? A. Quadruple B. Frequency C. Polarization D. Space

Last Answer : B. Frequency

Radio communication operation service between mobile and land stations or between mobile stations. A. Land mobile satellite service B. Maritime mobile service C. Mobile service D. Land mobile

Description : Radio communication operation service between mobile and land stations or between mobile stations. A. Land mobile satellite service B. Maritime mobile service C. Mobile service D. Land mobile

Last Answer : C. Mobile service

A porous material is far more efficient at high than low frequency absorption. How to improve sound absorption at lower frequencies using this absorber? A. Increase the thickness B. Decrease the thickness C. Mount with and airspace behind D. Both A and C above

Description : A porous material is far more efficient at high than low frequency absorption. How to improve sound absorption at lower frequencies using this absorber? A. Increase the thickness B. Decrease the thickness C. Mount with and airspace behind D. Both A and C above

Last Answer : D. Both A and C above

Emission on a frequency or frequencies immediately outside the necessary bandwidth which result from the modulation process except spurious emission. A. Radiation B. Noise C. Out of the band D. Interference

Description : Emission on a frequency or frequencies immediately outside the necessary bandwidth which result from the modulation process except spurious emission. A. Radiation B. Noise C. Out of the band D. Interference

Last Answer : C. Out of the band

One of the reasons why FDM is being replaced by TDM is A. noise is amplified with voice when an FDM system is used B. it is difficult to place channels side by side C. there is more time than frequency D. Most available frequencies has been used

Description : One of the reasons why FDM is being replaced by TDM is A. noise is amplified with voice when an FDM system is used B. it is difficult to place channels side by side C. there is more time than frequency D. Most available frequencies has been used

Last Answer : A. noise is amplified with voice when an FDM system is used

What does the noise weighting curve shows? A. Noise signals measured with a 144 handset B. Power levels of noise found in carrier systems C. The interfering effect of other frequencies in a voice channel compared with a reference frequency of one kilohertz D. Interfering effects of signals compared with a 3-kHz tone

Description : What does the noise weighting curve shows? A. Noise signals measured with a 144 handset B. Power levels of noise found in carrier systems C. The interfering effect of other frequencies in a voice ... a reference frequency of one kilohertz D. Interfering effects of signals compared with a 3-kHz tone

Last Answer : C. The interfering effect of other frequencies in a voice channel compared with a reference frequency of one kilohertz

In radio signal emission designation, the fifth symbol means A. Details of signals B. Type of information transmitted C. Nature of multiplexing D. Nature of signal modulating the main carrier

Description : In radio signal emission designation, the fifth symbol means A. Details of signals B. Type of information transmitted C. Nature of multiplexing D. Nature of signal modulating the main carrier

Last Answer : C. Nature of multiplexing

Multiplexing in a time division multiplexer occurs based upon A. the position of a frame within the group of frames B. the positioning of data within a frame C. the priority assigned to a connected device D. the activity of a connected device

Description : Multiplexing in a time division multiplexer occurs based upon A. the position of a frame within the group of frames B. the positioning of data within a frame C. the priority assigned to a connected device D. the activity of a connected device

Last Answer : B. the positioning of data within a frame

Multiplexing scheme use by baseband transmission. A. FDM B. Space multiplexing C. TDM D. Statistical multiplexing

Description : Multiplexing scheme use by baseband transmission. A. FDM B. Space multiplexing C. TDM D. Statistical multiplexing

Last Answer : C. TDM

The process of assigning PCM codes to absolute magnitudes A. Overloading B. All of these C. Quantizing D. Multiplexing

Description : The process of assigning PCM codes to absolute magnitudes A. Overloading B. All of these C. Quantizing D. Multiplexing

Last Answer : C. Quantizing

_______ is designed to be usedin wirelessapplications in which stations must be ableto sharethe medium without interception by an eavesdropperand without beingsubject tojamming from a malicious intruder. A) Spread spectrum B) Multiplexing C) Modulation D) None of the above

Description : _______ is designed to be usedin wirelessapplications in which stations must be ableto sharethe medium without interception by an eavesdropperand without beingsubject tojamming from a malicious intruder. A) Spread spectrum B) Multiplexing C) Modulation D) None of the above

Last Answer : Spread spectrum

The total space loss of transmission and reception for two ground stations with uplink frequency 8GHz and a downlink of 6 GHz with angle of elevations of 3˚ and 7˚ A respectively is A. 403 dB B. 100 dB C. 20 dB D. 215 dB

Description : The total space loss of transmission and reception for two ground stations with uplink frequency 8GHz and a downlink of 6 GHz with angle of elevations of 3˚ and 7˚ A respectively is A. 403 dB B. 100 dB C. 20 dB D. 215 dB

Last Answer : A. 403 dB

A radio communications link is to be established via the ionosphere. The maximum virtual height of the layer is 100 km at the midpoint of the path and the critical frequency is 2 MHz. The distance between stations is 600 km. determine the optimum working frequency? A. 6.32 MHz B. 2.1 MHz C. 5.4 MHz D. 1.8 MHz

Description : A radio communications link is to be established via the ionosphere. The maximum virtual height of the layer is 100 km at the midpoint of the path and the critical frequency is 2 MHz. The distance between stations is 600 ... optimum working frequency? A. 6.32 MHz B. 2.1 MHz C. 5.4 MHz D. 1.8 MHz

Last Answer : C. 5.4 MHz

One of the following prevents a transmitter from emitting a signal that interferes with other stations on frequency during the test. A. Use of low height antenna B. Use of grounded antenna C. Use of dummy antenna D. Use of shielded antenna radiator

Description : One of the following prevents a transmitter from emitting a signal that interferes with other stations on frequency during the test. A. Use of low height antenna B. Use of grounded antenna C. Use of dummy antenna D. Use of shielded antenna radiator

Last Answer : C. Use of dummy antenna

The ability of a single network to span multiple physical networks is known as ______ a. Subnettingb. Masking c. Fragmenting d. Hopping

Description : The ability of a single network to span multiple physical networks is known as ______ a. Subnetting b. Masking c. Fragmenting d. Hopping

Last Answer : a. Subnetting

An invitation from the primary to a secondary to transmit a message. A. Retransmission B. Selection C. Reuse D. Polling

Description : An invitation from the primary to a secondary to transmit a message. A. Retransmission B. Selection C. Reuse D. Polling

Last Answer : D. Polling

In communication satellite, multiple repeaters are known as a. detector b. modulator c. stations d. transponders

Description : In communication satellite, multiple repeaters are known as a. detector b. modulator c. stations d. transponders

Last Answer : transponders

What is the propagation delay when a signal is transmitter by an earth station to a geosynchronous satellite about 38,500 km above earth’s equator and then received by the same earth station? A. 256 msec B. 128 msec C. 300 msec D. 400 msec

Description : What is the propagation delay when a signal is transmitter by an earth station to a geosynchronous satellite about 38,500 km above earth’s equator and then received by the same earth station? A. 256 msec B. 128 msec C. 300 msec D. 400 msec

Last Answer : A. 256 msec

Which of the following types of HPA is not used in earth stations? A. TWT B. Transistor C. Klystron D. Magnetron

Description : Which of the following types of HPA is not used in earth stations? A. TWT B. Transistor C. Klystron D. Magnetron

Last Answer : D. Magnetron

Space diversity transmission means transmitting and receiving on A. two or more antennas operating on two different frequencies B. two or more identical frequencies C. two or more different frequencies D. two or more antennas operating on the same frequencies

Description : Space diversity transmission means transmitting and receiving on A. two or more antennas operating on two different frequencies B. two or more identical frequencies C. two or more different frequencies D. two or more antennas operating on the same frequencies

Last Answer : D. two or more antennas operating on the same frequencies

Which circuit is most common to both frequency-hopping and direct-sequence spread spectrum transmitters?

Description : Which circuit is most common to both frequency-hopping and direct-sequence spread spectrum transmitters?

Last Answer : PSN code generator

Which of the following scheme is used by Bluetooth? a) Frequency hopping TDD scheme b) Frequency hopping FDD scheme c) DSSS TDD scheme d) DSSS FDD scheme

Description : Which of the following scheme is used by Bluetooth? a) Frequency hopping TDD scheme b) Frequency hopping FDD scheme c) DSSS TDD scheme d) DSSS FDD scheme

Last Answer : a) Frequency hopping TDD scheme

Explain fast frequency hopping techniques with suitable waveforms. State its advantage and disadvantages.

Description : Explain fast frequency hopping techniques with suitable waveforms. State its advantage and disadvantages. 

Last Answer : In Fast Frequency hopping multiple frequencies or hops are used to transmit one symbol. The hop rate is higher than symbol rate but chip rate is equal to hop rate For each symbol ... at receiver 3. Complex and expensive digital frequency synthesizers are required 4. Data rates are low

When the elevation angle of a geostationary satellite is 23˚ and the transmitting frequency is 3840 MHz, what is the free space loss in dB? A. 196 dB B. 200 dB C. 150 dB D. 100 dB

Description : When the elevation angle of a geostationary satellite is 23˚ and the transmitting frequency is 3840 MHz, what is the free space loss in dB? A. 196 dB B. 200 dB C. 150 dB D. 100 dB

Last Answer : A. 196 dB

The bandwidth of C-band satellite frequency band in U.S. A. 500 GHz B. 1000 GHz C. 1000 MHz D. 500 MHz

Description : The bandwidth of C-band satellite frequency band in U.S. A. 500 GHz B. 1000 GHz C. 1000 MHz D. 500 MHz

Last Answer : D. 500 MHz

The frequency of Ku band for satellite communications. A. 6/4 GHz B. 14/11 GHz C. 12/14 GHz D. 4/8 GHz

Description : The frequency of Ku band for satellite communications. A. 6/4 GHz B. 14/11 GHz C. 12/14 GHz D. 4/8 GHz

Last Answer : B. 14/11 GHz

What is the local oscillator (mixer) frequency of the satellite with an uplink frequency in GHz band? A. 3500 MHz B. 4500 MHz C. 2225 MHz D. 2555 MHz

Description : What is the local oscillator (mixer) frequency of the satellite with an uplink frequency in GHz band? A. 3500 MHz B. 4500 MHz C. 2225 MHz D. 2555 MHz

Last Answer : C. 2225 MHz

_________ detects the satellite signal relayed from the feed and converts it to an electric current, amplifies and lower its frequency. A. Horn antenna B. LNA C. Satellite receiver D. Satellite dish

Description : _________ detects the satellite signal relayed from the feed and converts it to an electric current, amplifies and lower its frequency. A. Horn antenna B. LNA C. Satellite receiver D. Satellite dish

Last Answer : B. LNA

What is the current frequency band given most attenuation for satellite communications? A. Ku B. C band C. J D. P

Description : What is the current frequency band given most attenuation for satellite communications? A. Ku B. C band C. J D. P

Last Answer : A. Ku

A satellite receives an uplink frequency of _______ MHz from a ground station of 3700 MHz. A. 8150 MHz B. 1475 MHz C. 2225 MHz D. 5925 MHz

Description : A satellite receives an uplink frequency of _______ MHz from a ground station of 3700 MHz. A. 8150 MHz B. 1475 MHz C. 2225 MHz D. 5925 MHz

Last Answer : D. 5925 MHz

relayed from the feed and converts it to an electric current, amplifies and lower its frequency. A. Feedhorn B. Satellite dish C. Satellite receiver D. LNB

Description : _______ detects the satellite signal relayed from the feed and converts it to an electric current, amplifies and lower its frequency. A. Feedhorn B. Satellite dish C. Satellite receiver D. LNB

Last Answer : D. LNB

________is the set of techniques that allows the simultaneous transmission of multiple signalsacrossa single data link. A) Demodulating B) Multiplexing C) Compressing D) None of the above

Description : ________is the set of techniques that allows the simultaneous transmission of multiple signalsacrossa single data link. A) Demodulating B) Multiplexing C) Compressing D) None of the above

Last Answer : Multiplexing

A single channel is shared by multiple signals by _____ a. analog modulation b. digital modulation c. multiplexing d. phase modulation

Description : A single channel is shared by multiple signals by _____ a. analog modulation b. digital modulation c. multiplexing d. phase modulation

Last Answer : c. multiplexing

A method of multiple accessing where a given RF channel bandwidth is divided inot smaller frequency band. A. CDMA B. ANIK-D C. TDMA D. FDMA

Description : A method of multiple accessing where a given RF channel bandwidth is divided inot smaller frequency band. A. CDMA B. ANIK-D C. TDMA D. FDMA

Last Answer : D. FDMA

What is a selective fading effect? A. A fading effect caused by small changes in beam heading at the receiving station. B. A fading effect caused by phase differences between radio wave components of the same transmission, as experienced at the receiving station. C. A fading effect caused by large changes in the height of the ionosphere, as experienced at the receiving station D. A fading effect caused by time differences between the receiving and transmitting stations.

Description : What is a selective fading effect? A. A fading effect caused by small changes in beam heading at the receiving station. B. A fading effect caused by phase differences between radio wave ... station D. A fading effect caused by time differences between the receiving and transmitting stations.

Last Answer : B. A fading effect caused by phase differences between radio wave components of the same transmission, as experienced at the receiving station.