What is the stage of the sand becoming a silicon? a. Liquid b. Gas c. Molten d. Hot

What is the stage of the sand becoming a silicon?
a. Liquid
b. Gas
c. Molten
d. Hot
by

1 Answer

Answer :

c. Molten
by

Related questions

What is the stage of the sand becoming silicon? A. Hot B. Gas C. Liquid D. Molten

Description : What is the stage of the sand becoming silicon? A. Hot B. Gas C. Liquid D. Molten

Last Answer : D. Molten

What is the stage of the sand becoming a silicon? ∙ a. Liquid ∙ b. Gas ∙ c. Molten ∙ d. Hot What is the stage of the sand becoming a silicon? ∙ a. Liquid ∙ b. Gas ∙ c. Molten ∙ d. Hot

Description : What is the stage of the sand becoming a silicon? ∙ a. Liquid ∙ b. Gas ∙ c. Molten ∙ d. Hot

Last Answer : c. Molten

During pudding (A) Molten metal is kept clear of the fuel (B) Carbon is converted into carbonic acid gas (C) Silicon forms a slag (D) All the above

Description : During pudding (A) Molten metal is kept clear of the fuel (B) Carbon is converted into carbonic acid gas (C) Silicon forms a slag (D) All the above

Last Answer : Answer: Option D

Uniform ramming of sand in green sand moulding process leads to (A) Reduced chance of gas porosity (B) Greater dimensional stability of the casting (C) Uniform flow of molten metal into the mould cavity (D) Less sand expansion type of casting defect

Description : Uniform ramming of sand in green sand moulding process leads to (A) Reduced chance of gas porosity (B) Greater dimensional stability of the casting (C) Uniform flow of molten metal into the mould cavity (D) Less sand expansion type of casting defect

Last Answer : Option B

What do we call molten hot liquid rock while it is still below the Earth's surface?

Description : What do we call molten hot liquid rock while it is still below the Earth's surface?

Last Answer : fb

Addition of silicon to cast iron (A) Promotes graphite module formation (B) Improves its ductility (C) Does not promote graphite flakes formation (D) Increases the fluidity of molten metal

Description : Addition of silicon to cast iron (A) Promotes graphite module formation (B) Improves its ductility (C) Does not promote graphite flakes formation (D) Increases the fluidity of molten metal

Last Answer : Option D

Slag is a name given for - (1) molten iron (2) molten sand (3) molten alumina (4) molten calcium silicate

Description : Slag is a name given for - (1) molten iron (2) molten sand (3) molten alumina (4) molten calcium silicate

Last Answer : (3) molten alumina Explanation: Slag is a partially vitreous byproduct of the process of smelting ore, which separates the desired metal fraction from the unwanted fraction. A good example is steelmaking ... separated from the metal, and assist in the removal of sulfur and phosphorus from the steel.

furnace slag is mainly molten (A) Sand (B) Magnesium silicate (C) Calcium silicate (D) Iron pyrite

Description : furnace slag is mainly molten (A) Sand (B) Magnesium silicate (C) Calcium silicate (D) Iron pyrite

Last Answer : Option C

Slag is a name given for (1) molten iron (2) molten sand (3) molten alumina (4) molten calcium silicate

Description : Slag is a name given for (1) molten iron (2) molten sand (3) molten alumina (4) molten calcium silicate

Last Answer : molten alumina

What kind of battery panels are used in some advance satellites? A. Gallium Arsenide solar panel B. Germanium based panels C. Silicon based panels D. Gallium Phosphate solar panel

Description : What kind of battery panels are used in some advance satellites? A. Gallium Arsenide solar panel B. Germanium based panels C. Silicon based panels D. Gallium Phosphate solar panel

Last Answer : A. Gallium Arsenide solar panel

why silicon type transistor are more often used than germanium?

Description : why silicon type transistor are more often used than germanium?

Last Answer : because silicon has smaller cutoff current Icbo, small variations in Icbo due to variation in temperature as compared to those in case of germanium.

Write the basic chemical reaction in the epitaxial growth process of pure silicon.

Description : Write the basic chemical reaction in the epitaxial growth process of pure silicon.

Last Answer : The basic chemical reaction in the epitaxial growth process of pure silicon is the hydrogen reduction of silicon tetrachloride. 1200C SiCl4 + 2H2 Si + 4 HCl

The lowest resistance grounding on earth A. Sand B. Clay C. Surface loam soil D. Limestone

Description : The lowest resistance grounding on earth A. Sand B. Clay C. Surface loam soil D. Limestone

Last Answer : C. Surface loam soil

In what medium sound travels the faster? A. Vacuum B. Solid C. Liquid D. Gas

Description : In what medium sound travels the faster? A. Vacuum B. Solid C. Liquid D. Gas

Last Answer : B. Solid

Why does hot water and molten rock tend to rise?

Description : Why does hot water and molten rock tend to rise?

Last Answer : Compared to cold water, hot water has less density; therefore itfloats on the colder water - it tends to rise. I am not surewhether the situation is the same for molten rock; it likely hasless density than non-molten rock, but I am not sure whether that'sthe only reason it rises.

The gas liberated when red hot silicon reacts with steam is

Description : The gas liberated when red hot silicon reacts with steam is

Last Answer : hydrogen.

Which of the following reactors is operated at high neutron flux and low power level? (A) Breeder reactor (B) Research reactor (C) Heterogeneous reactor (D) Liquid metal (e.g., molten sodium) cooled reactor

Description : Which of the following reactors is operated at high neutron flux and low power level? (A) Breeder reactor (B) Research reactor (C) Heterogeneous reactor (D) Liquid metal (e.g., molten sodium) cooled reactor

Last Answer : (B) Research reactor

Liquid metal (e.g., molten sodium) is preferred as a coolant in case of a/an __________ reactor. (A) Homogeneous (B) Graphite moderated (C) Fast breeder (D) Enriched uranium (3% U-235) fuelled

Description : Liquid metal (e.g., molten sodium) is preferred as a coolant in case of a/an __________ reactor. (A) Homogeneous (B) Graphite moderated (C) Fast breeder (D) Enriched uranium (3% U-235) fuelled

Last Answer : (C) Fast breeder

The type of pump used for the recirculation of molten sodium coolant in liquid metal cooled reactor is a/an __________ pump. (A) Electromagnetic (B) Reciprocating (C) Centrifugal (D) Volute

Description : The type of pump used for the recirculation of molten sodium coolant in liquid metal cooled reactor is a/an __________ pump. (A) Electromagnetic (B) Reciprocating (C) Centrifugal (D) Volute

Last Answer : (A) Electromagnetic

Which of the following is not used as a medium for high temperature heating ? (A) Dowtherm (B) Mercury (C) Liquid metal (e.g. molten sodium) (D) Fused salts (e.g., an eutectic mixture of 53% KNO3 , 40% NaNO2and 7% NaNO3 )

Description : Which of the following is not used as a medium for high temperature heating ? (A) Dowtherm (B) Mercury (C) Liquid metal (e.g. molten sodium) (D) Fused salts (e.g., an eutectic mixture of 53% KNO3 , 40% NaNO2and 7% NaNO3 )

Last Answer : (B) Mercury

Which of the following liquid metals has the highest thermal conductivity? (A) Molten sodium (B) Molten lead (C) Mercury (D) Molten potassium

Description : Which of the following liquid metals has the highest thermal conductivity? (A) Molten sodium (B) Molten lead (C) Mercury (D) Molten potassium

Last Answer : (A) Molten sodium

A pycnometer is used for the measurement of (A) Flow rate of molten metal (B) Specific gravity of a liquid (C) Composition of alloys (D) Concentration of a solution

Description : A pycnometer is used for the measurement of (A) Flow rate of molten metal (B) Specific gravity of a liquid (C) Composition of alloys (D) Concentration of a solution

Last Answer : Option B

Sodium sulphur battery is a type of molten-salt battery constructed from _____ sodium and sulphur. • Solid • Liquid • Plasma • Gases

Description : Sodium sulphur battery is a type of molten-salt battery constructed from _____ sodium and sulphur. • Solid • Liquid • Plasma • Gases

Last Answer : • Liquid

The first stage of a two-stage amplifier has a voltage gain of 10, a 600 Ω input resistor, a 1600Ω equivalent noise resistance and 27kΩ output resistor. For the second stage, these values are 25, 81kΩ, 19kΩ, and 1MΩ, respectively. Calculate the equivalent input-noise resistance of this two stage amplifier. A. 2,518 kΩ B. 2,518 Ω C. 251.8 Ω D. 12,518 Ω

Description : The first stage of a two-stage amplifier has a voltage gain of 10, a 600 Ω input resistor, a 1600Ω equivalent noise resistance and 27kΩ output resistor. For the second stage, these values are 25, 81kΩ, 19kΩ, and 1MΩ, ... this two stage amplifier. A. 2,518 kΩ B. 2,518 Ω C. 251.8 Ω D. 12,518 Ω

Last Answer : B. 2,518 Ω

What part or section of a TV receiver that separates the sound and video signals? A. IF stage B. Video amplifier C. Video detector D. Burst separator

Description : What part or section of a TV receiver that separates the sound and video signals? A. IF stage B. Video amplifier C. Video detector D. Burst separator

Last Answer : C. Video detector

What is known as the final stage in the evolution of the GSM standard? A. WAP B. GPRS C. EDGE D. Bluetooth

Description : What is known as the final stage in the evolution of the GSM standard? A. WAP B. GPRS C. EDGE D. Bluetooth

Last Answer : C. EDGE

When measuring a transmitter’s frequency against a suitable standard, the frequency to be measured is taken from the A. oscillator stage B. intermediate amplifier C. buffer stage D. final RF stage

Description : When measuring a transmitter’s frequency against a suitable standard, the frequency to be measured is taken from the A. oscillator stage B. intermediate amplifier C. buffer stage D. final RF stage

Last Answer : D. final RF stage

When no signal is being received, the loudspeaker is not entirely silent as a result of the presence of A. parasitic oscillations in some of the receiver stages. B. negative feedback in each stage. C. spurious frequencies as a result of improper neutralization. D. internal receiver noise.

Description : When no signal is being received, the loudspeaker is not entirely silent as a result of the presence of A. parasitic oscillations in some of the receiver stages. B. negative feedback in each stage. C. spurious frequencies as a result of improper neutralization. D. internal receiver noise.

Last Answer : D. internal receiver noise.

One of the following is a high powered RF ac basic transmitter that has two or more stages, the oscillator stage which determines the frequency opereation and RF amplifier stage orstages that develop the high power output. The purpose of which is to develop a good frequency stability. A. Goldsmith B. MOPA C. Alexanderson D. Hartley

Description : One of the following is a high powered RF ac basic transmitter that has two or more stages, the oscillator stage which determines the frequency opereation and RF amplifier stage orstages that develop the ... to develop a good frequency stability. A. Goldsmith B. MOPA C. Alexanderson D. Hartley

Last Answer : B. MOPA

Referred to as the stage in the radio receiver that contributes most of the noise. A. IF amplifier B. Supply stage C. Speaker D. Mixer

Description : Referred to as the stage in the radio receiver that contributes most of the noise. A. IF amplifier B. Supply stage C. Speaker D. Mixer

Last Answer : D. Mixer

After the IF stages have been aligned, the next stage to align in FM receiver is. A. local oscillator B. limiter stage C. RF amplifier D. mixer stage

Description : After the IF stages have been aligned, the next stage to align in FM receiver is. A. local oscillator B. limiter stage C. RF amplifier D. mixer stage

Last Answer : A. local oscillator

Cross modulation on a receiver is eliminated at the A. RF stage B. mixer stage C. IF stage D. detector stage

Description : Cross modulation on a receiver is eliminated at the A. RF stage B. mixer stage C. IF stage D. detector stage

Last Answer : D. detector stage

what is the stage levels of becoming diabetes?

Description : what is the stage levels of becoming diabetes?

Last Answer : what is the stage level of becoming a Diabetes.

How does the atmosphere protect the earth from becoming too hot?

Description : How does the atmosphere protect the earth from becoming too hot?

Last Answer : Atmosphere blocks the harmful rays of the sun and some reflected back into the space and some are absorbed by the clouds and dust particles. So due to this earth is not become too hot.

Thermocol is a spongy, porous, rigid or flexible foamed plastic, obtained by blowing gas/air through molten (A) Saturated polyester (B) Polyurethane (C) Polystyrene (D) Either (B) or (C)

Description : Thermocol is a spongy, porous, rigid or flexible foamed plastic, obtained by blowing gas/air through molten (A) Saturated polyester (B) Polyurethane (C) Polystyrene (D) Either (B) or (C)

Last Answer : (D) Either (B) or (C)

Which of the following types of nuclear reactors is most prone to radioactive hazards? (A) Pressurised water reactor (B) Gas cooled reactor (C) Molten sodium cooled reactor (D) Boiling water reactor

Description : Which of the following types of nuclear reactors is most prone to radioactive hazards? (A) Pressurised water reactor (B) Gas cooled reactor (C) Molten sodium cooled reactor (D) Boiling water reactor

Last Answer : (D) Boiling water reactor

Which of the following nuclear reactors is the most efficient thermodynamically while operating between the same temperature and pressure limits of the reactor? (A) Molten sodium cooled (B) CO2 gas cooled (C) Pressurised water (D) Boiling water

Description : Which of the following nuclear reactors is the most efficient thermodynamically while operating between the same temperature and pressure limits of the reactor? (A) Molten sodium cooled (B) CO2 gas cooled (C) Pressurised water (D) Boiling water

Last Answer : (D) Boiling water

The electrolysis of molten sodium hydride librates hydrogen gas at the ------------- .

Description : The electrolysis of molten sodium hydride librates hydrogen gas at the ------------- .

Last Answer : Ans. Anode

Satellite engine uses A. jet propulsion B. ion propulsion system C. liquid fuel D. solar jet

Description : Satellite engine uses A. jet propulsion B. ion propulsion system C. liquid fuel D. solar jet

Last Answer : B. ion propulsion system

Satellite engine use A. liquid fuel B. jet propulsion C. ion propulsion system D. solar jet

Description : Satellite engine use A. liquid fuel B. jet propulsion C. ion propulsion system D. solar jet

Last Answer : C. ion propulsion system

Silicon diodes designed for a specific reverse breakdown voltage, become useful as an electronic power supply voltage regulator, called _____________. A. tunnel diodes B. hot-carrier diodes C. compensating diodes D. Zener diodes

Description : Silicon diodes designed for a specific reverse breakdown voltage, become useful as an electronic power supply voltage regulator, called _____________. A. tunnel diodes B. hot-carrier diodes C. compensating diodes D. Zener diodes

Last Answer : Answer: D

How does red hot silicon react with steam?

Description : How does red hot silicon react with steam?

Last Answer : Silicon is insoluble in water. It slowly decomposes with steam. When silicon is in red hot state, it reacts with steam liberating hydrogen.

The usual values of maximum flux densities for distribution transformers using hot rolled silicon steel are (a) 0.5 to 0.8 Wb/m2 (b) 0.8 to 1.0 Wb/m2 (c) 1.1 to 1.35 Wb/m2 (d) 1.4 to 1.8 Wb/m2

Description : The usual values of maximum flux densities for distribution transformers using hot rolled silicon steel are (a) 0.5 to 0.8 Wb/m2 (b) 0.8 to 1.0 Wb/m2 (c) 1.1 to 1.35 Wb/m2 (d) 1.4 to 1.8 Wb/m2

Last Answer : (c) 1.1 to 1.35 Wb/m2

_________ is the transition of a given substance from the solid to the gas phase with no intermediate liquid stage.  a. Convection  b. Conduction  c. Radiation  d. Sublimation

Description : _________ is the transition of a given substance from the solid to the gas phase with no intermediate liquid stage.  a. Convection  b. Conduction  c. Radiation  d. Sublimation

Last Answer : Sublimation

Which of the following metals is in a liquid state at normal room temperature? (a) Sodium (b) Radium (c) Gallium (d) Silicon

Description : Which of the following metals is in a liquid state at normal room temperature? (a) Sodium (b) Radium (c) Gallium (d) Silicon

Last Answer : Ans:(c)

What is the only non-metal element that is a liquid at room temperature and one atmosphere? w) bromine x) argon y) silicon z) selenium

Description : What is the only non-metal element that is a liquid at room temperature and one atmosphere? w) bromine x) argon y) silicon z) selenium

Last Answer : ANSWER: W -- BROMINE

One sunny afternoon, three men go for a ride on a hot air balloon over the Sahara desert. An hour into the trip, the balloon begins to lose altitude. A month later, someone found one of the ballooners laying on the desert sand dead, naked, and holding half a toothpick. What happened to him? -Riddles

Description : One sunny afternoon, three men go for a ride on a hot air balloon over the Sahara desert. An hour into the trip, the balloon begins to lose altitude. A month later, someone found one of the ballooners laying on the desert sand dead, naked, and holding half a toothpick. What happened to him? -Riddles

Last Answer : As the balloon lost altitude, the men took of their clothes and threw them overboard to decrease the weight of the balloon. The balloon continued to drop so the men drew straws to see who would be forced to jump. The dead man in the desert drew the shortest one (the half toothpick).

When you touch the hot sand heat is transferred by?

Description : When you touch the hot sand heat is transferred by?

Last Answer : Conduction

The mirage is seen in a hot desert because of (a) The density of the layer of air increases with altitude (b) The density of the layer of air decreases with altitude (c) The reflection of light from the layers of sand (d) The total internal reflection from sand

Description : The mirage is seen in a hot desert because of (a) The density of the layer of air increases with altitude (b) The density of the layer of air decreases with altitude (c) The reflection of light from the layers of sand (d) The total internal reflection from sand

Last Answer : Ans:(a)