A bird sitting on a high tension electric wire does not get electrocuted because – (1) it has high resistance (2) the body is earthed (3) it does not form a closed path for the flow of current (4) its feet are good insulators

A bird sitting on a high tension electric wire does not get electrocuted because – (1) it has high resistance (2) the body is earthed (3) it does not form a closed path for the flow of current (4) its feet are good insulators
by

1 Answer

Answer :

(3) it does not form a closed path for the flow of current Explanation: Electricity travels from a place of high voltage to low voltage, just as water travels from high elevation to low elevation. A bird, or any living thing, that touches a wire (where electricity is moving from high voltage to low voltage) and also touches the ground (a place with no voltage) creates a path that allows the electricity to travel through that body and into the place with no voltage. When electricity travels through a body in this fashion, electrocution takes place, and the bird can die.
by
selected

Related questions

A bird sitting on a high tension electric wire does not get electrocuted because (1) it has high resistance (2) the body is earthed (3) it does not form a closed path for the flow of current (4) its feet are good insulators

Description : A bird sitting on a high tension electric wire does not get electrocuted because (1) it has high resistance (2) the body is earthed (3) it does not form a closed path for the flow of current (4) its feet are good insulators 

Last Answer : it does not form a closed path for the flow of current

Why don't birds get electrocuted when they land on an electric wire? -Science

Description : Why don't birds get electrocuted when they land on an electric wire? -Science

Last Answer : Birds can sit on power lines and not get electric shocks because the electricity is always looking for a way to get to the ground. The birds are not touching the ground or anything in contact with the ground, so the electricity will stay in the power line.

Nichrome wire is used in an electric heater because _______. (1) It has high resistance (2) It has high melting point (3) It can resist a current upto approx 5 amperes (4) For all of the above reasons

Description : Nichrome wire is used in an electric heater because _______. (1) It has high resistance (2) It has high melting point (3) It can resist a current upto approx 5 amperes (4) For all of the above reasons

Last Answer : (4) For all of the above reasons

An electrical appliance is earthed to 1. Protect the appliance against any damage 2. Prevent electric shocks 3. Avoid short-circuiting Which of the above is/are correct? (a) 1 only (b) 2 only (c) 1 and 2 (d) 2 and 3

Description : An electrical appliance is earthed to 1. Protect the appliance against any damage 2. Prevent electric shocks 3. Avoid short-circuiting Which of the above is/are correct? (a) 1 only (b) 2 only (c) 1 and 2 (d) 2 and 3

Last Answer : Ans:(b)

Why the neutral is earthed through earthing resistance in case of UT and SUT?

Description : Why the neutral is earthed through earthing resistance in case of UT and SUT? 

Last Answer : This is done to limit the earth fault current.  

Superconductors are those elements – (1) Whose conductivity is intermediate between metals and insulators (2) Whose resistance falls almost to zero at very low temperature (3) Which conduct electricity only at super-high temperature (4) Which conduct electricity only, at super-high temperatures

Description : Superconductors are those elements – (1) Whose conductivity is intermediate between metals and insulators (2) Whose resistance falls almost to zero at very low temperature (3) Which conduct electricity only at super-high temperature (4) Which conduct electricity only, at super-high temperatures

Last Answer : (2) Whose resistance falls almost to zero at very low temperature Explanation: Superconductivity is a phenomenon of exactly zero electrical resistance and expulsion of magnetic fields occurring in ... lines from the interior of the superconductor as it transitions into the superconducting state.

Superconductors are those elements (1) Whose conductivity is intermediate between metals and insulators (2) Whose resistance falls almost to zero at very low temperatures (3) which turn into insulators at very low temperatures (4) which conduct electricity only at super-high temperatures

Description : Superconductors are those elements (1) Whose conductivity is intermediate between metals and insulators (2) Whose resistance falls almost to zero at very low temperatures (3) which turn into insulators at very low temperatures (4) which conduct electricity only at super-high temperatures

Last Answer : Whose resistance falls almost to zero at very low temperatures

Electric current in a metal wire is due to the flow of — (1) Electrons (2) Protons (3) Ions (4) Holes

Description : Electric current in a metal wire is due to the flow of — (1) Electrons (2) Protons (3) Ions (4) Holes

Last Answer : (1) Electrons Explanation: A solid conductive metal contains mobile, or free electrons, originating in the conduction electrons. When a metal wire is connected across the two terminals of a DC ... the conductor are forced to drift toward the positive terminal under the influence of this field.

Electric current in a metal wire is due to the flow of— (1) Electrons (2) Protons (3) Ions (4) Holes

Description : Electric current in a metal wire is due to the flow of— (1) Electrons (2) Protons (3) Ions (4) Holes

Last Answer : Electrons

Super conductors are substances that – (1) offer minimum resistance to flow of electric current (2) conduct electricity at low temperature (3) conduct electricity at high temperature (4) offer high resistance to the flow of electric current

Description : Super conductors are substances that – (1) offer minimum resistance to flow of electric current (2) conduct electricity at low temperature (3) conduct electricity at high temperature (4) offer high resistance to the flow of electric current

Last Answer : (1) offer minimum resistance to flow of electric current Explanation: A superconductor is a material that can conduct electricity or transport electrons from one atom to another with no ... is released from the material when it reaches the temperature at which it becomes superconductive.

Super conductors are substances that (1) offer minimum resistance to flow of electric current (2) conduct electricity at low temperature (3) conduct electricity at high temperature (4) offer high resistance to the flow of electric current

Description : Super conductors are substances that (1) offer minimum resistance to flow of electric current (2) conduct electricity at low temperature (3) conduct electricity at high temperature (4) offer high resistance to the flow of electric current

Last Answer : offer minimum resistance to flow of electric current

The distance between a generator and its load is 100 feet. What would be the approximate total voltage drop across a two wire supply cable if the current were 5.5 amperes and the resistance of the wire were 2.525 ohms per 1,000 feet? A. 0.5 volts B. 1.38 volts C. 1.90 volts D. 2.77 volts

Description : The distance between a generator and its load is 100 feet. What would be the approximate total voltage drop across a two wire supply cable if the current were 5.5 amperes and the resistance of the wire were 2.525 ohms per 1,000 feet? A. 0.5 volts B. 1.38 volts C. 1.90 volts D. 2.77 volts

Last Answer : Answer: D

A coil is wound with 400 feet of No. 16 tinned copper wire and connected to a 12 volt battery. What is the current if the resistance per 1000 feet of No. 16 tinned copper wire is 4.26 ohms? A. 4.8 amps B. 7.06 amps C. 10.65 amps D. 11.27 amps

Description : A coil is wound with 400 feet of No. 16 tinned copper wire and connected to a 12 volt battery. What is the current if the resistance per 1000 feet of No. 16 tinned copper wire is 4.26 ohms? A. 4.8 amps B. 7.06 amps C. 10.65 amps D. 11.27 amps

Last Answer : Answer: B

A coil is wound with 200 feet of No. 16 tinned copper wire and connected to a 12 volt battery. What is the current if the resistance per 1000 feet of No. 16 tinned copper wire is 4.26 ohms? A. 1.14 amps B. 7.04 amps C. 10.22 amps D. 14.08 amps

Description : A coil is wound with 200 feet of No. 16 tinned copper wire and connected to a 12 volt battery. What is the current if the resistance per 1000 feet of No. 16 tinned copper wire is 4.26 ohms? A. 1.14 amps B. 7.04 amps C. 10.22 amps D. 14.08 amps

Last Answer : Answer: D

Which of the following statements about copper wire sized by the AWG rating is correct? A. Number 12 AWG wire has a higher current rating than number 10 AWG wire. B. Number 10 AWG wire has a higher dielectric strength than number 12 AWG wire. C. Number 12 AWG wire is larger than Number 10 AWG wire. D. Number 12 AWG wire at 25°C has more resistance per 1000 feet than No. 10 AWG wire at 25°C.

Description : Which of the following statements about copper wire sized by the AWG rating is correct? A. Number 12 AWG wire has a higher current rating than number 10 AWG wire. B. Number 10 AWG wire has a higher ... Number 12 AWG wire at 25°C has more resistance per 1000 feet than No. 10 AWG wire at 25°C.

Last Answer : Answer: D

Magnetic materials (A) provide path to magnetic flux. (B) are good insulators. (C) are semiconductors. (D) None.

Description : Magnetic materials (A) provide path to magnetic flux. (B) are good insulators. (C) are semiconductors. (D) None.

Last Answer : (A) provide path to magnetic flux.

Is it theoretically possible to be electrocuted while using a bidet?

Description : Is it theoretically possible to be electrocuted while using a bidet?

Last Answer : Anything is possible; but. it should be highly unlikely!!!

Why don't birds get electrocuted when they sit on a power line?

Description : Why don't birds get electrocuted when they sit on a power line?

Last Answer : There are two reasons: 1. The wire is insulated (like the cord that goes to a table lamp), so the bird never touches the part with the electricity. 2. Electricity goes from one place to another, like ... end of the battery. There is no where for the electricity to flow, so the bird is not hurt.

Can I Q. Can I become electrocuted by an Earthing product

Description : Can I Q. Can I become electrocuted by an Earthing product

Last Answer : No. When you plug in the cord of A. No. When you plug in the cord of an Earthing she an Earthing sheet or mat into an electrical outlet, et or mat into an electrical outlet, ... the electrical power that operates your at operates yourlights and appliances in the lights and appliances in the house.

A infinite resistance is considered as a/an a) Closed path(short circuit) b) Open path c) Not defined d) Ammeter with zero reading

Description : A infinite resistance is considered as a/an a) Closed path(short circuit) b) Open path c) Not defined d) Ammeter with zero reading

Last Answer : b) Open path

When the current flow through a copper wire increases, its _____________. A. resistance will decrease B. insulation will burn C. temperature will increase D. conductivity will increase

Description : When the current flow through a copper wire increases, its _____________. A. resistance will decrease B. insulation will burn C. temperature will increase D. conductivity will increase

Last Answer : Answer: C

Why control transformer is earthed?

Description : Why control transformer is earthed?

Last Answer : If it is not earthed grounding of control circuit at two different places can cause bypassing of logics. In case of primary and secondary of the control transformer is getting the main fuse ... 415v will be superimposed in the control circuit during short circuit of primary and secondary winding)

Can I wear any type of footwear and still be earthed?

Description : Can I wear any type of footwear and still be earthed?

Last Answer : No. Standard plastic/rubber or composite soles do not conduct the Earth's electric energy. Most shoes today are made from those materials. You need leather or hide soles, which used to be ... . Hopefully soon shoe companies will begi shoe companies will begin making n making grounded grounded shoes.

In a semiconductor diode, p-side is earthed and to n-side is applied a potential of -2 volt; the diode shall (a) Conduct (b) Not conduct (c) Conduct partially (d) Break down

Description : In a semiconductor diode, p-side is earthed and to n-side is applied a potential of -2 volt; the diode shall (a) Conduct (b) Not conduct (c) Conduct partially (d) Break down

Last Answer : a) Conduct

The resistance of a few meters of wire conductor in closed electrical circuit is?

Description : The resistance of a few meters of wire conductor in closed electrical circuit is?

Last Answer : The resistance of a few meters of wire conductor in closed electrical circuit is practically zero.

Change in length and cross-sectional area of metal wire changes A. current B. voltage C. resistance D. magnetic effect

Description : Change in length and cross-sectional area of metal wire changes A. current B. voltage C. resistance D. magnetic effect

Last Answer : resistance

A circular flexible loop of wire of radius r carrying a current I is placed in a uniform magnetic field B . If B is doubled, then tension in the loop

Description : A circular flexible loop of wire of radius r carrying a current I is placed in a uniform magnetic field B . If B is doubled, then tension in the loop

Last Answer : A circular flexible loop of wire of radius r carrying a current I is placed in a uniform magnetic field ... is doubled C. is halved D. becomes 4 times

Pick up the incorrect statement from the following: (A) Plastics are chemical resistant (B) Plastics are durable (C) Plastics are ductile (D) Plastics are excellent electric insulators

Description : Pick up the incorrect statement from the following: (A) Plastics are chemical resistant (B) Plastics are durable (C) Plastics are ductile (D) Plastics are excellent electric insulators

Last Answer : Answer: Option C

Porcelain is used as: (A) Sanitary wares (B) Electric insulators (C) Storage vessels (D) Reactor chambers

Description : Porcelain is used as: (A) Sanitary wares (B) Electric insulators (C) Storage vessels (D) Reactor chambers

Last Answer : Answer: Option D

Using table 1-2, determine the resistance of 1,500 feet of AWG 20 wire at 25º C.

Description : Using table 1-2, determine the resistance of 1,500 feet of AWG 20 wire at 25º C.

Last Answer : 1,000 ft = 10.4 ohms1,500 ft = 1.5 × 0.4 = 15.6 ohms

A hiker stands at the bottom of steep hill. The hiker may follow a straight line path to the top of the hill, a distance of 300 feet, or she may follow a zig-zag path to the top of the hill and walk a distance of 600 feet. The work done by the force of gravity along the zig-zag path is how many times the work going along the straight path? Is it: w) equal x) twice y) 4 times z) 8 times?

Description : A hiker stands at the bottom of steep hill. The hiker may follow a straight line path to the top of the hill, a distance of 300 feet, or she may follow a zig-zag path to the top of the hill and walk a ... times the work going along the straight path? Is it: w) equal x) twice y) 4 times z) 8 times?

Last Answer : ANSWER: W -- EQUAL 

The substances which have a large number of free electrons and offer a low resistance are called (a) insulators (b) inductors (c) semi-conductors (d) conductors

Description : The substances which have a large number of free electrons and offer a low resistance are called (a) insulators (b) inductors (c) semi-conductors (d) conductors

Last Answer : (d) conductors

The fuse in our domestic electric circuit melts when there is a high rise in – (1) Inductance (2) Current (3) Resistance (4) Capacitance

Description : The fuse in our domestic electric circuit melts when there is a high rise in – (1) Inductance (2) Current (3) Resistance (4) Capacitance

Last Answer : (2) Current Explanation: In electronics and electrical engineering, a fuse is a type of low resistance resistor that acts as a sacrificial device to provide over protection, of either the load ... fuse interrupts excessive current (blows) so that further damage by overheating or fire is prevented.

Bird Sitting?

Description : Bird Sitting?

Last Answer : form_title=Bird Sitting form_header=Need someone to take care of your feathered buddy while away? Discover professional bird sitters in your area! What kind of bird do you own?*= _[50] Are you looking for an in-home bird sitter?*= () Yes () No Will you be providing your own cage?*= () Yes () No

Which of the following is the term used for the resistance of a liquid system to flow? w) surface tension x) diffusion y) viscosity

Description : Which of the following is the term used for the resistance of a liquid system to flow? w) surface tension x) diffusion y) viscosity

Last Answer : ANSWER: Y -- VISCOSITY

Pain in the hands and feet and occasional tingling in the hands and tension in the muscles. The body is also weak. Want to know the cause and remedy ?

Description : Pain in the hands and feet and occasional tingling in the hands and tension in the muscles. The body is also weak. Want to know the cause and remedy ?

Last Answer : A lot of the time I sit idle without working or I do some work and it happens again and again because of more effort or work and so it happens because the reason for the weakness of the body ... care you will exercise regularly and more If there is a problem, the doctor will show you the medicine

A Fuse wire is characterized by – (1) High resistance and low melting point (2) High resistance and high melting point (3) Low resistance and high melting point (4) Low resistance and low melting point

Description : A Fuse wire is characterized by – (1) High resistance and low melting point (2) High resistance and high melting point (3) Low resistance and high melting point (4) Low resistance and low melting point

Last Answer : (4) Low resistance and low melting point Explanation: A fuse is a type of low resistance resistor that acts as a sacrificial device to provide over current protection, of either the load or source ... melt if a current more than the safe current for the appliance starts flowing through the circuit.

The nature of .fuse wire is – (1) high resistance and low melting point. (2) high resistance and high melting point. (3) low resistance and high melting point. (4) low resistance and low melting point.

Description : The nature of .fuse wire is – (1) high resistance and low melting point. (2) high resistance and high melting point. (3) low resistance and high melting point. (4) low resistance and low melting point.

Last Answer : (1) high resistance and low melting point. Explanation: A fuse or fusable link works by opening an electrical circuit when the current becomes too high. As the current increases, the temperature ... be connected in series with the appliance. Besides, it should have a comparatively high resistance.

A Fuse wire is characterised by (1) High resistance and low melting point (2) High resistance and high melting point (3) Low resistance and high melting point (4) Low resistance and low melting point

Description : A Fuse wire is characterised by (1) High resistance and low melting point (2) High resistance and high melting point (3) Low resistance and high melting point (4) Low resistance and low melting point

Last Answer : Low resistance and low melting point

The nature of fuse wire is (1) high resistance and low melting point. (2) high resistance and high melting point. (3) low resistance and high melting point. (4) low resistance and low melting point.

Description : The nature of fuse wire is (1) high resistance and low melting point. (2) high resistance and high melting point. (3) low resistance and high melting point. (4) low resistance and low melting point.

Last Answer : high resistance and low melting point.

The resistance furnace produces heat by the (A) Electric arc struck between electrodes and the charge (B) Flow of current through a heating element (C) Combination of induced current and skin effect (D) None of these

Description : The resistance furnace produces heat by the (A) Electric arc struck between electrodes and the charge (B) Flow of current through a heating element (C) Combination of induced current and skin effect (D) None of these

Last Answer : (B) Flow of current through a heating element

Full form of CFL used in place of electric bulbs is – (1) compact fluorescent lamp (2) constantan filament lamp (3) closed filament lamp (4) closed fluorescent lamp

Description : Full form of CFL used in place of electric bulbs is – (1) compact fluorescent lamp (2) constantan filament lamp (3) closed filament lamp (4) closed fluorescent lamp

Last Answer : (1) compact fluorescent lamp Explanation: A compact fluorescent lamp (CFL) is a fluorescent lamp designed to replace an incandescent lamp; some types fit into light fixtures formerly used for incandescent lamps.

Full form of CFL used in place of electric bulbs is (1) compact fluorescent lamp (2) constantan filament lamp (3) closed filament lamp (4) closed fluorescent lamp

Description : Full form of CFL used in place of electric bulbs is (1) compact fluorescent lamp (2) constantan filament lamp (3) closed filament lamp (4) closed fluorescent lamp

Last Answer : compact fluorescent lamp

An egg sinks in soft water but floats in a concentrated solution of salt because – (1) Egg absorbs salt from the solution and expands (2) Albumin dissolves in salt solution and egg becomes lighter (3) The density of salt solution exceeds the density of eggs (4) Water has high surface tension

Description : An egg sinks in soft water but floats in a concentrated solution of salt because – (1) Egg absorbs salt from the solution and expands (2) Albumin dissolves in salt solution and egg becomes lighter (3) The density of salt solution exceeds the density of eggs (4) Water has high surface tension

Last Answer : (3) The density of salt solution exceeds the density of eggs Explanation: Following the density principle, the density of the egg compared to the density of the tap water is lesser (the density principle ... and that is why an egg sinks in soft water but floats in a concentrated solution of salt.

An egg sinks in soft water but floats in a concentrated solution of salt because (1) egg absorbs salt from the solution and expands (2) albumin dissolves in salt solution and egg becomes lighter (3) the density of salt solution exceeds the density of eggs (4) water has high surface tension

Description : An egg sinks in soft water but floats in a concentrated solution of salt because (1) egg absorbs salt from the solution and expands (2) albumin dissolves in salt solution and egg becomes lighter (3) the density of salt solution exceeds the density of eggs (4) water has high surface tension

Last Answer : the density of salt solution exceeds the density of eggs

The resistance of electric wire will decrease as its _______________. A. length increases B. cross-sectional area increases C. temperature increases D. percent of metallic purities increases

Description : The resistance of electric wire will decrease as its _______________. A. length increases B. cross-sectional area increases C. temperature increases D. percent of metallic purities increases

Last Answer : Answer: B

Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent) varies linearly as the radial distance (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid

Description : Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent ... of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid

Last Answer : (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity

What is the function of a fuse wire? (a) To prevent an unduly high electric current from passing through a circuit (b) To increase the current supply (c) To decrease the current supply (d) To stabilise the voltage

Description : What is the function of a fuse wire? (a) To prevent an unduly high electric current from passing through a circuit (b) To increase the current supply (c) To decrease the current supply (d) To stabilise the voltage

Last Answer : Ans:(a)

Insulators perform which of the following functions? a) Conduction b) Convection c) Provide electrical insulation d) Allows current leakage at interfaces

Description : Insulators perform which of the following functions? a) Conduction b) Convection c) Provide electrical insulation d) Allows current leakage at interfaces

Last Answer : c) Provide electrical insulation

To prevent footdrop, the patient is positioned in: a) Order to keep the feet at right angles to the leg When the patient is supine in bed, padded splints or protective boots are used. b) A semi-sitting position in bed Semi-fowlers positioning is used to decrease the pressure of abdominal contents on the diaphragm. c) A sitting position with legs hanging off the side of the bed In order to prevent footdrop, the feet must be supported. d) A side-lying position Side-lying positions do not provide support to prevent footdrop.

Description : To prevent footdrop, the patient is positioned in: a) Order to keep the feet at right angles to the leg When the patient is supine in bed, padded splints or protective boots are used. b) ... must be supported. d) A side-lying position Side-lying positions do not provide support to prevent footdrop.

Last Answer : a) Order to keep the feet at right angles to the leg When the patient is supine in bed, padded splints or protective boots are used.