The ambient air quaility standard (24 hours' average) for lead in industrial area is (1) 0.65 pg/m3 (2) 0/5 pg/m3 (3) 1.0 pg/m3 (4) 1.5 pg/m3

The ambient air quaility standard (24 hours' average) for lead in industrial area is (1) 0.65 pg/m3 (2) 0/5 pg/m3 (3) 1.0 pg/m3 (4) 1.5 pg/m3
by

1 Answer

Answer :

(4) 1.5 pg/m3 Explanation: The ambient air quality standard (24 hours' average) for lead in industrial area is 1.5 pg/m3
by
selected

Related questions

The ambient air quaility standard (24 hours’ average) for lead in industrial area is (1) 0.65 µg/m3 (2) 0.75 µg/m3 (3) 1.0 µg/m3 (4) 1.5 µg/m3

Description : The ambient air quaility standard (24 hours’ average) for lead in industrial area is (1) 0.65 µg/m3 (2) 0.75 µg/m3 (3) 1.0 µg/m3 (4) 1.5 µg/m3

Last Answer :  1.5 µg/m3

A 30-m vertical column of fluid (density 1878 kg/m3 ) is located where g= 9.65 mps2 . Find the pressure at the base of the column. (Formula: pg= gρhg/k )  a. 543680 N/m2  b. 543.68 kPa (gauge)  c. Both a & b  d. None of the above

Description : A 30-m vertical column of fluid (density 1878 kg/m3 ) is located where g= 9.65 mps2 . Find the pressure at the base of the column. (Formula: pg= gρhg/k )  a. 543680 N/m2  b. 543.68 kPa (gauge)  c. Both a & b  d. None of the above

Last Answer : Both a & b

The normal serum concentration of 1,25- dihydroxycholecalciferol in pg/ml is (A) 26–65 (B) 1–5 (C) 5–20 (D) 80–100

Description : The normal serum concentration of 1,25- dihydroxycholecalciferol in pg/ml is (A) 26–65 (B) 1–5 (C) 5–20 (D) 80–100

Last Answer : Answer : A

The serum estradiol level in men is (A) 0–5 pg/ml (B) 5–10 pg/ml (C) 24–68 pg/ml (D) 40–60 pg/ml

Description : The serum estradiol level in men is (A) 0–5 pg/ml (B) 5–10 pg/ml (C) 24–68 pg/ml (D) 40–60 pg/ml

Last Answer : Answer : C

The serum estradiol level in women during 1–10 days of menstrual cycle is (A) 0–10 pg/ml (B) 12–20 pg/ml (C) 24–68 pg/ml (D) 80–100 pg/ml

Description : The serum estradiol level in women during 1–10 days of menstrual cycle is (A) 0–10 pg/ml (B) 12–20 pg/ml (C) 24–68 pg/ml (D) 80–100 pg/ml

Last Answer : Answer : C

The rated temperature rise of an electric motor is the _____________. A. average temperature at any given latitude B. normal temperature rise above the standard ambient temperature at rated load C. average temperature rise due to resistance at 10% overload D. permissible difference in the ambient temperature of the motor due to existing weather conditions

Description : The rated temperature rise of an electric motor is the _____________. A. average temperature at any given latitude B. normal temperature rise above the standard ambient temperature at rated load ... D. permissible difference in the ambient temperature of the motor due to existing weather conditions

Last Answer : Answer: B

The volume of standard air is _____ m3/kg of dry air. a. 0.533 b. 0.633 c. 0.733 d. 0.833 e. 0.933

Description : The volume of standard air is _____ m3/kg of dry air. a. 0.533 b. 0.633 c. 0.733 d. 0.833 e. 0.933

Last Answer : Answer: D

The specific volume of air is expressed as the volume of: a. 1 kg of air at 101.325 kPa in cm3 b. 0.833 kg of air at standard pressure and temperature in m3 c. 1 kg of air at 101.325 kPa and 21 degrees Celsius in m3 d. 1 g of air occupied at any temperature and pressure e. 1 kg of air, regardless of temperature and pressure

Description : The specific volume of air is expressed as the volume of: a. 1 kg of air at 101.325 kPa in cm3 b. 0.833 kg of air at standard pressure and temperature in m3 c. 1 kg of air at 101.325 ... d. 1 g of air occupied at any temperature and pressure e. 1 kg of air, regardless of temperature and pressure

Last Answer : Answer: C

I'm looking for good quaility in home daycare provider to care for my 3 year old and my 8 month old in Winston salem, NC ?

Description : I'm looking for good quaility in home daycare provider to care for my 3 year old and my 8 month old in Winston salem, NC ?

Last Answer : Children's World Learning Center has daycare service you could enroll you children in, and they are in Winston-Salem. They have a website where you can learn more about them: www.achildsworldnc.com

Standard air is the: a. Mass of 1 cubic meter of dry air at 20°C and atmospheric pressure b. Mass of a cubic meter of air at atmospheric conditions c. Volume of air at ambient temperature and atmospheric pressure d. Volume of 1 kg of dry air at 21°C and atmospheric pressure at sea level or 101.325 kPa e. Volume of 1 kg of air at 15°C and 100 kPa

Description : Standard air is the: a. Mass of 1 cubic meter of dry air at 20°C and atmospheric pressure b. Mass of a cubic meter of air at atmospheric conditions c. Volume of air at ambient temperature and atmospheric pressure ... pressure at sea level or 101.325 kPa e. Volume of 1 kg of air at 15°C and 100 kPa

Last Answer : Answer: D

The distribution of heights of American women aged 18 to 24 is approximately normally distributed with a mean of 65.5 inches and standard deviation of 2.5 inches. Calculate the z-score for a woman six feet tall. a. 2.60 b. 4.11 c. 1.04 d. 1.33

Description : The distribution of heights of American women aged 18 to 24 is approximately normally distributed with a mean of 65.5 inches and standard deviation of 2.5 inches. Calculate the z-score for a woman six feet tall. a. 2.60 b. 4.11 c. 1.04 d. 1.33

Last Answer : a. 2.60

A conducting wire of cross-sectional area `1 cm^(2)` has `3 xx 10^(23)` charge carriers per m3. If wire carries a current of `24 mA`, then drift veloc

Description : A conducting wire of cross-sectional area `1 cm^(2)` has `3 xx 10^(23)` charge carriers per m3. If wire carries a current of `24 mA`, then drift veloc

Last Answer : A conducting wire of cross-sectional area `1 cm^(2)` has `3 xx 10^(23)` charge carriers per m3. If wire carries ... 3)ms^(-1)` D. `5xx10^(-6)ms^(-1)`

If tube feeding is continuous, the placement of the feeding tube should be checked a) every shift. Each nurse caring for the patient is responsible for verifying that the tube is located in the proper area for continuous feeding. b) every hour. Checking for placement each hour is unnecessary unless the patient is extremely restless or there is basis for rechecking the tube based on other patient activities. c) every 24 hours. Checking for placement every 24 hours does not meet the standard of care due the patient receiving continuous tube feedings. d) when a tube feeding is continuous, it is unnecessary to check placement. Even though the feedings are continuous, the placement must be assessed.

Description : If tube feeding is continuous, the placement of the feeding tube should be checked a) every shift. Each nurse caring for the patient is responsible for verifying that the tube is located ... is unnecessary to check placement. Even though the feedings are continuous, the placement must be assessed.

Last Answer : a) every shift. Each nurse caring for the patient is responsible for verifying that the tube is located in the proper area for continuous feeding.

For a homogeneous earth dam 50 m high having 2 m free broad, a flow net was constructed and the results were : Number of potential drops = 2.4 Number of flow channels = 0.4. If co-efficiency of permeability of the dam material is 3 × 10-3 cm3 /sec, the discharge per metre length of dam, is (A) 12 × 10-5 m3 /sec (B) 24 × 10-3 m3 /sec (C) 6 × 10-5 m3 /sec (D) 24 × 10-5 m3 /sec

Description : For a homogeneous earth dam 50 m high having 2 m free broad, a flow net was constructed and the results were : Number of potential drops = 2.4 Number of flow channels = 0.4. If co-efficiency of permeability of the dam material is ... 24 10-3 m3 /sec (C) 6 10-5 m3 /sec (D) 24 10-5 m3 /sec

Last Answer : (D) 24 × 10-5 m3 /sec

An isothermal aqueous phase reversible reaction, P ⇌ R, is to be carried out in a mixed flow reactor. The reaction rate in k.mole/m3 .h is given by, r = 0.5CP - 0.125CR. A stream containing only P enters the reactor. The residence time required (in hours) for 40% conversion of P is (A) 0.80 (B) 1.33 (C) 1.60 (D) 2.67

Description : An isothermal aqueous phase reversible reaction, P ⇌ R, is to be carried out in a mixed flow reactor. The reaction rate in k.mole/m3 .h is given by, r = 0.5CP - 0.125CR. A stream containing only P enters the reactor. The ... (in hours) for 40% conversion of P is (A) 0.80 (B) 1.33 (C) 1.60 (D) 2.67

Last Answer : (C) 1.60

Which of the following statements describes the effects of ambient temperature on local action within lead-acid storage batteries? A. Increasing ambient temperature increases local action. B. Increasing ambient temperature decreases local action. C. Ambient temperature has no effect on local action. D. At 90°F all local action virtually ceases.

Description : Which of the following statements describes the effects of ambient temperature on local action within lead-acid storage batteries? A. Increasing ambient temperature increases local action. B. Increasing ambient ... has no effect on local action. D. At 90°F all local action virtually ceases.

Last Answer : Answer: A

The average speed of a bus in the upward journey is 50% more than that in the return journey. The bus halts for 2 hrs on reaching the destination. The total time taken for the complete to and from trip is 34 hrs covering a distance of 1600 km. the speed of the bus in the upward journey is. a) 63.24 b) 65.67 c) 63.49 d) 62.49

Description : The average speed of a bus in the upward journey is 50% more than that in the return journey. The bus halts for 2 hrs on reaching the destination. The total time taken for the complete to and from trip is 34 hrs ... speed of the bus in the upward journey is. a) 63.24 b) 65.67 c) 63.49 d) 62.49

Last Answer : D Let the speed in return journey be x km/hr Then speed in upward journey = 150 /100 x = (3/2 x)km/hr Average speed = (2*3x/2*x) / (3x/2 +x) =3x2 / (5x/2) =6x2 / 5x =6x/5 km/hr Therefore (1600 ... 192x = 8000 X = 41.66 Speed in upward journey = (3/2 x ) km/hr =(3/2*41.66) =62.49 km/hr 

Ampere hour capacity of an industrial battery is based on ……….hours discharge rate A. 8 B. 12 C. 16 D. 24

Description : Ampere hour capacity of an industrial battery is based on ……….hours discharge rate A. 8 B. 12 C. 16 D. 24

Last Answer : A. 8

While swimming a depth of 13m in a fresh water lake a fish emits an air bubble of volume 2 mm² atmospheric pressure is 100kpa what is the original pressure of the bubble.  a. 217.17 kpa  b. 119 kpa  c. 326.15 kpa  d. 210 kap Pabs = Pg + Patm

Description : While swimming a depth of 13m in a fresh water lake a fish emits an air bubble of volume 2 mm² atmospheric pressure is 100kpa what is the original pressure of the bubble.  a. 217.17 kpa  b. 119 kpa  c. 326.15 kpa  d. 210 kap Pabs = Pg + Patm

Last Answer : 217.17 kpa

An automobile tire has a gauge pressure of 200 kpa at 0°C assuming no air leaks and no change of volume of the tire, what is the gauge pressure at 35ºC.  a. 298.645  b. 398.109  c. 291.167  d. 281.333 Pg = Pabs - Patm

Description : An automobile tire has a gauge pressure of 200 kpa at 0°C assuming no air leaks and no change of volume of the tire, what is the gauge pressure at 35ºC.  a. 298.645  b. 398.109  c. 291.167  d. 281.333 Pg = Pabs - Patm

Last Answer : 298.645

. The inner wall of a furnace is at a temperature of 700°C. The composite wall is made of two substances, 10 and 20 cm thick with thermal conductivities of 0.05 and 0.1 W.m-1.°C-1 respectively. The ambient air is at 30°C and the heat transfer co-efficient between the outer surface of wall and air is 20 W.m-2 .°C-1 . The rate of heat loss from the outer surface in W.m-2 is (A) 165.4 (B) 167.5 (C) 172.5 (D) 175

Description : . The inner wall of a furnace is at a temperature of 700°C. The composite wall is made of two substances, 10 and 20 cm thick with thermal conductivities of 0.05 and 0.1 W.m-1.°C-1 respectively. The ambient air is at 30°C ... from the outer surface in W.m-2 is (A) 165.4 (B) 167.5 (C) 172.5 (D) 175

Last Answer : (A) 165.4

Unit weight of P.C.C . in kN/m3 is (a) 24 KN/m3 (b) 25 kN/m3 (c) 20kN/m3 (d) 26 kN/m3

Description : Unit weight of P.C.C . in kN/m3 is (a) 24 KN/m3 (b) 25 kN/m3 (c) 20kN/m3 (d) 26 kN/m3

Last Answer : (a) 24 KN/m3

The unit weight of cement in kN/m3 (a) 25 kN/m3 (b) 24 kN/m3 (c) 20 kN/m3 (d) 16 kN/m3

Description : The unit weight of cement in kN/m3 (a) 25 kN/m3 (b) 24 kN/m3 (c) 20 kN/m3 (d) 16 kN/m3

Last Answer : (d) 16 kN/m3

Specific weight of Reinforced cement concrete is [ A ] 24 N/m3 [ B ] 24 kN/m3 [ C ] 25 N/m3 [ D ] 25 kN/m3

Description : Specific weight of Reinforced cement concrete is [ A ] 24 N/m3 [ B ] 24 kN/m3 [ C ] 25 N/m3 [ D ] 25 kN/m3

Last Answer : [ D ] 25 kN/m3

What is the specific weight of water at standard condition? (Formula: γ = ρg / k)  a. 1000 kgm/m3  b. 9.8066 m/s2  c. 1000 kgf/m3  d. None of the above

Description : What is the specific weight of water at standard condition? (Formula: γ = ρg / k)  a. 1000 kgm/m3  b. 9.8066 m/s2  c. 1000 kgf/m3  d. None of the above

Last Answer : 1000 kgf/m3

I have a MCH of 32.2, Pg, a given Range by the clinic of 27.0 - 31.0: Is this too high and cause for attention ?

Description : I have a MCH of 32.2, Pg, a given Range by the clinic of 27.0 - 31.0: Is this too high and cause for attention ?

Last Answer : “I have a MCH of 32.2, Pg, a given Range by the clinic of 27.0 -31.0: Is this too high and cause for attention? ”

Normal serum glucagons level in fasting state varies between (A) 0-–10 pg/ml (B) 20–100 pg/ml (C) 200–300 pg/ml (D) 400–500 pg/ml

Description : Normal serum glucagons level in fasting state varies between (A) 0-–10 pg/ml (B) 20–100 pg/ml (C) 200–300 pg/ml (D) 400–500 pg/ml

Last Answer : Answer : B

Thrombolytic therapy has become a useful adjunct in the management of peripheral arterial occlusion. In this setting, direct intraarterial administration rather than intravenous has been advocated to decrease the risk of systemic bleeding. Which of the following true statement(s) concerning the use of thrombolytic agents for arterial occlusion is/are true? a. A standard technique involves infusing high-dose urokinase, 4000 units per minute for 1–2 hours, directly into the clot by a catheter embedded in the thrombus b. If progress is made, further fibrinolytic therapy is given at 1000 to 2000 units per minute until clot lysis has occurred c. The usual infusion time by the above-stated technique is usually in excess of 24 hours d. Successful clot lysis occurs more frequently in arterial graf

Description : Thrombolytic therapy has become a useful adjunct in the management of peripheral arterial occlusion. In this setting, direct intraarterial administration rather than intravenous has been advocated ... may be indicated for situations where complete clot evacuation cannot be accomplished surgically

Last Answer : Answer: a, b, e The most popular method for intraarterial thrombolytic therapy for arterial occlusion involves passing a guidewire through the thrombus with arteriographic guidance and ... acute arterial occlusion) or when distal vasculative is occluded and precludes appropriate inflow patency

One ton of the refrigeration is (a) the standard unit used in refrigeration problems (b) the cooling effect produced by melting 1 ton of ice (c) the refrigeration effect to freeze 1 ton of water at 0°C into ice at 0°C in 24 hours (d) the refrigeration effect to produce 1 ton of ice at NTP conditions

Description : One ton of the refrigeration is (a) the standard unit used in refrigeration problems (b) the cooling effect produced by melting 1 ton of ice (c) the refrigeration effect to freeze 1 ton of water at ... ice at 0°C in 24 hours (d) the refrigeration effect to produce 1 ton of ice at NTP conditions

Last Answer : Ans: c

Char value of Kerosene is the amount of charred oil deposition on the wick obtained after burning it in a standard wick lamp at a standard rate for 24 hours. Char value of a good quality kerosene should be less than __________ mg/kg of kerosene. (A) 1 (B) 20 (C) 100 (D) 500

Description : Char value of Kerosene is the amount of charred oil deposition on the wick obtained after burning it in a standard wick lamp at a standard rate for 24 hours. Char value of a good quality kerosene should be less than __________ mg/kg of kerosene. (A) 1 (B) 20 (C) 100 (D) 500

Last Answer : (B) 20

Threshold limit value of copper in the atmospheric air is - (1) 0.001 mg/m3 (2) 0.01 mg/m3 (3) 1.0 mg/m3 (4) 5.0 mg/m3

Description : Threshold limit value of copper in the atmospheric air is - (1) 0.001 mg/m3 (2) 0.01 mg/m3 (3) 1.0 mg/m3 (4) 5.0 mg/m3

Last Answer : (3) 1.0 mg/m3 Explanation: Inspirable copper dust takes a predominantly fibrous effect. The ALV of copper aerosol in the workplace atmosphere is 0.5 mg/m3, while the threshold limit value (TLV) is 1.0 mg/m3.

A bed consists of particles of density 2000 kg/m3 . If the height of the bed is 1.5 metres and its porosity 0.6, the pressure drop required to fluidise the bed by air is (A) 25.61 kPa (B) 11.77 kPa (C) 14.86 kPa (D) 21.13 kPa

Description : A bed consists of particles of density 2000 kg/m3 . If the height of the bed is 1.5 metres and its porosity 0.6, the pressure drop required to fluidise the bed by air is (A) 25.61 kPa (B) 11.77 kPa (C) 14.86 kPa (D) 21.13 kPa

Last Answer : (B) 11.77 kPa

Bed pressure drop in an air fluidised bed of catalyst particles (ρp = 200 kg/m3, Dp = 0.05 cm) of 60 cm bed depth and bed porosity of 0.5 expressed in cm of water (manometer) is (A) 90 (B) 60 (C) 45 (D) 30

Description : Bed pressure drop in an air fluidised bed of catalyst particles (ρp = 200 kg/m3, Dp = 0.05 cm) of 60 cm bed depth and bed porosity of 0.5 expressed in cm of water (manometer) is (A) 90 (B) 60 (C) 45 (D) 30

Last Answer : (B) 60

The interfacial area per unit volume of dispersion, in a gas-liquid contactor, for fractional hold up of gas = 0.1 and gas bubble diameter = 0.5 mm is given by (in m2 /m3 ) (A) 500 (B) 1200 (C) 900 (D) 800

Description : The interfacial area per unit volume of dispersion, in a gas-liquid contactor, for fractional hold up of gas = 0.1 and gas bubble diameter = 0.5 mm is given by (in m2 /m3 ) (A) 500 (B) 1200 (C) 900 (D) 800

Last Answer : (A) 500

Mean drift velocity of electron in a copper wire having cross-sectional area 5.0 × 10-6 m2 carrying current of 1 A and having number density 8.5 × 1028 m3 is A. 0.015 mm s-1 B. 0.1 mm s-1 C. 0.5 mm s-1 D. 0.25 mm s-1

Description : Mean drift velocity of electron in a copper wire having cross-sectional area 5.0 × 10-6 m2 carrying current of 1 A and having number density 8.5 × 1028 m3 is A. 0.015 mm s-1 B. 0.1 mm s-1 C. 0.5 mm s-1 D. 0.25 mm s-1

Last Answer : 0.015 mm s-1

At equilibrium the concentration of water in vapour phase (C* ) in kg/m3 of air space and the amount of water (m) adsorbed per kg of dry silica gel are related by, C* = 0.0667m. To maintain dry conditions in a room of air space 100m3 containing 2.2 kg of water vapour initially, 10 kg of dry silica gel is kept in the room. The fraction of initial water remaining in the air space after a long time (during which the temperature is maintained constant) is (A) 0.0 (B) 0.2 (C) 0.4 (D) 1.0

Description : At equilibrium the concentration of water in vapour phase (C* ) in kg/m3 of air space and the amount of water (m) adsorbed per kg of dry silica gel are related by, C* = 0.0667m. To maintain dry conditions in a room ... which the temperature is maintained constant) is (A) 0.0 (B) 0.2 (C) 0.4 (D) 1.0

Last Answer : (C) 0.4

The density of Air is-------? A. 0.225 kg/m3 B. 1.025 kg/m3 C. 1.225 kg/m3 (Answer) D. 1.425 kg/m3

Description : The density of Air is-------? A. 0.225 kg/m3 B. 1.025 kg/m3 C. 1.225 kg/m3 (Answer) D. 1.425 kg/m3

Last Answer : C. 1.225 kg/m3 (Answer)

For a catchment area of 120 km², the equilibrium discharge in m3/hour of a Scurve obtained by the summation of 6 hour unit hydro graph is (A) 0.2 × 106 (B) 0.6 × 106 (C) 2.4 × 106 (D) 7.2 × 10

Description : For a catchment area of 120 km², the equilibrium discharge in m3/hour of a Scurve obtained by the summation of 6 hour unit hydro graph is (A) 0.2 × 106 (B) 0.6 × 106 (C) 2.4 × 106 (D) 7.2 × 10

Last Answer : Answer: Option A

Utilizing the answer to the previous problem, estimate the overall or average increase in temperature ( ΔT) of the concrete roof from the energy absorbed from the sun during a12hour day. Assume that all of the radiation absorbed goes into heating the roof. The specific heat of concrete is about 900 J/kg, and the density is about 2,300 kg/m3 .  a. 7.9 °C  b. 8.9°C  c. 9.9°C  d. 10.9°C formula: ΔQ = m c ΔT

Description : Utilizing the answer to the previous problem, estimate the overall or average increase in temperature ( ΔT) of the concrete roof from the energy absorbed from the sun during a12hour day. Assume that all of the radiation absorbed goes into ... °C  b. 8.9°C  c. 9.9°C  d. 10.9°C formula: ΔQ = m c ΔT

Last Answer : 7.9 °C

The serum estradiol level in women during 11–20 days of menstrual cycle is (A) 5–30 pg/ml (B) 50–300 pg/ml (C) 500–900 pg/ml (D) 1000 pg/ml

Description : The serum estradiol level in women during 11–20 days of menstrual cycle is (A) 5–30 pg/ml (B) 50–300 pg/ml (C) 500–900 pg/ml (D) 1000 pg/ml

Last Answer : Answer : B

The _____________ sensor, checks the temperature of the ambient air entering the engine for fine tuning the mixture strength. a) engine temperature b) exhaust gas c) air flow d) air inlet temperature

Description : The _____________ sensor, checks the temperature of the ambient air entering the engine for fine tuning the mixture strength. a) engine temperature b) exhaust gas c) air flow d) air inlet temperature

Last Answer : Answer: d Explanation: The air inlet temperature sensor, checks the temperature of the ambient air entering the engine for fine tuning the mixture strength whereas the engine temperature sensor senses the ... gas senor senses the amount of oxygen in the engine exhaust and calculates air-fuel ratio.

Which one of the following statement is not correct for the volumetric efficiency of a reciprocating air compressor? A. It decreases with increase in ambient temperature B. It increases with decrease in pressure ratio C. It increases with decrease in clearance ratio D. It decreases with increases in delivery pressure

Description : Which one of the following statement is not correct for the volumetric efficiency of a reciprocating air compressor? A. It decreases with increase in ambient temperature B. It increases with ... It increases with decrease in clearance ratio D. It decreases with increases in delivery pressure

Last Answer : ANSWER : A

Consider the following statements 1. Large cold storage plants use ammonia as refrigerant while domestic refrigerators use chlorofluorocarbons. 2. Ammonia can be liquefied at ambient temperatures and at low pressures. 3. Chlorofluorocarbons are air pollutants. The correct statement(s) is/are: (a) 1 and 3 only (b) 2 and 3 only (c) 1, 2 and 3 (d) 3 only

Description : Consider the following statements 1. Large cold storage plants use ammonia as refrigerant while domestic refrigerators use chlorofluorocarbons. 2. Ammonia can be liquefied at ambient temperatures and at low pressures. 3. Chlorofluorocarbons are ... 3 only (b) 2 and 3 only (c) 1, 2 and 3 (d) 3 only

Last Answer : Ans:(a)

The ambient air is stable when the ambient lapse rate is – (1) Neutrally stable (2) Hyper-adiabatic (3) Sub-adiabatic (4) Super-adiabatic

Description : The ambient air is stable when the ambient lapse rate is – (1) Neutrally stable (2) Hyper-adiabatic (3) Sub-adiabatic (4) Super-adiabatic

Last Answer : (3) Sub-adiabatic

Breathing loss" on storage of gasoline occurs due to the (A) Presence of unsaturated air (B) Fluctuation of ambient temperature during day and night (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Breathing loss" on storage of gasoline occurs due to the (A) Presence of unsaturated air (B) Fluctuation of ambient temperature during day and night (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (B) Fluctuation of ambient temperature during day and night

For the air water system under ambient conditions, the adiabatic saturation temperature and the wet bulb temperature are nearly equal, because (A) Water has a high latent heat of evaporation (B) Lewis number is close to unity (C) They are always equal under all circumstances

Description : For the air water system under ambient conditions, the adiabatic saturation temperature and the wet bulb temperature are nearly equal, because (A) Water has a high latent heat of evaporation (B) Lewis number is close to unity (C) They are always equal under all circumstances

Last Answer : (A) Water has a high latent heat of evaporation

For a given ambient air temperature with increase in the thickness of insulation of a hot cylindrical pipe, the rate of heat loss from the surface would (A) Decrease(B) Increase(C) First decrease and then increase(D) First increase and then decrease

Description : For a given ambient air temperature with increase in the thickness of insulation of a hot cylindrical pipe, the rate of heat loss from the surface would (A) Decrease (B) Increase (C) First decrease and then increase (D) First increase and then decrease

Last Answer : (D) First increase and then decrease

Loss of heat from untagged steam pipe to the ambient air is by (A) Conduction (B) Convection (C) Radiation (D) All (A), (B) & (C)

Description : Loss of heat from untagged steam pipe to the ambient air is by (A) Conduction (B) Convection (C) Radiation (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

The minimum temperature to which the water can be cooled in a cooling tower is the __________ temperature of air. (A) Ambient (B) Dry bulb (C) Dew point (D) Wet bulb

Description : The minimum temperature to which the water can be cooled in a cooling tower is the __________ temperature of air. (A) Ambient (B) Dry bulb (C) Dew point (D) Wet bulb

Last Answer : C) Dew point

A thin, flat & square plate measuring 2 m × 2 m is freely hanging in ambient air at 25°C. It is exposed to the solar radiation falling on one side of the plate at the rate of 500 W/m2. The plate temperature will remain constant at 30°C, if the convective heat transfer co-efficient is __________ W/m2 °C. (A) 50 (B) 100 (C) 150 (D) 200

Description : A thin, flat & square plate measuring 2 m 2 m is freely hanging in ambient air at 25°C. It is exposed to the solar radiation falling on one side of the plate at the rate of 500 W/m2. The plate temperature will ... heat transfer co-efficient is __________ W/m2 °C. (A) 50 (B) 100 (C) 150 (D) 200

Last Answer : (B) 100