The weight of a rusted iron object compared to that of an unrusted one is (a) Appreciably more than (b) The same as (c) Less than (d) More or less the same as

The weight of a rusted iron object compared to that of an unrusted one is (a) Appreciably more than (b) The same as (c) Less than (d) More or less the same as
by

1 Answer

Answer :

Ans:(a)
by
selected

Related questions

Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal mixed reactor at steady state, the exit stream has the samecomposition as fluid within the reactor and the space time is equivalent toholding time for constant density system(C) Plug flow reactor (PFR) is always smaller than mixed reactor for allpositive reaction orders for a particular duty(D) Reaction rate does not decrease appreciably as the reaction proceeds incase of an autocatalytic reaction

Description : Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal ... D) Reaction rate does not decrease appreciably as the reaction proceeds in case of an autocatalytic reaction

Last Answer : (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity

Which of the following conditions indicates a short circuited capacitor when checking its condition with an ohmmeter? A. The capacitor shows charging, but the final resistance reading is appreciably less than normal. B. The reading is practically zero and remains there. C. The capacitor shows no charging action, but indicates a very high resistance. D. The pointer moves quickly to the low resistance side of the scale, then slowly recedes toward infinity.

Description : Which of the following conditions indicates a short circuited capacitor when checking its condition with an ohmmeter? A. The capacitor shows charging, but the final resistance reading is appreciably less ... moves quickly to the low resistance side of the scale, then slowly recedes toward infinity.

Last Answer : Answer: B

Rusted wrought iron outdoor furniture?

Description : Rusted wrought iron outdoor furniture?

Last Answer : Due to the nature of damage to the furniture being variable, there's no one kit that would be universally applicable. Instead, you'll want to start with an iron brush to remove rust. And move on from there to determine what the next step will be.

To protect the iron from getting rusted, the coat of zinc is applied on it. This process is known as–

Description : To protect the iron from getting rusted, the coat of zinc is applied on it. This process is known as–

Last Answer : Galvanization

When iron is rusted, it is (A) Converted to a fine powder (B) Reduced (C) Oxidised (D) None of these

Description : When iron is rusted, it is (A) Converted to a fine powder (B) Reduced (C) Oxidised (D) None of these

Last Answer : (C) Oxidised

To protect the iron from getting rusted, the coat of zinc is applied on it. This process is known as

Description : To protect the iron from getting rusted, the coat of zinc is applied on it. This process is known as

Last Answer : Galvanization

raft increases with increase in forward speed for most of the implement, mainly due to a) More rapid acceleration of any soil particles that is moved appreciably b) More working width c) Increased working depth d) Draft decreases with increase in speed of implement

Description : raft increases with increase in forward speed for most of the implement, mainly due to a) More rapid acceleration of any soil particles that is moved appreciably b) More working width c) Increased working depth d) Draft decreases with increase in speed of implement

Last Answer : a) More rapid acceleration of any soil particles that is moved appreciably

Relative volatility does not change appreciably with the change in (A) Temperature (B) Vapour pressure of either component (C) Total pressure (D) None of these

Description : Relative volatility does not change appreciably with the change in (A) Temperature (B) Vapour pressure of either component (C) Total pressure (D) None of these

Last Answer : (A) Temperature

Pick out the wrong statement. (A) Constant pressure distillation cannot separate an Azeotropic mixture (B) Relative volatility of a binary mixture changes appreciably with the minor change in temperature (C) The relative volatility of a binary mixture at Azeotropic composition is unity (D) Flash distillation is practised on wide spread scale in petroleum refinery

Description : Pick out the wrong statement. (A) Constant pressure distillation cannot separate an Azeotropic mixture (B) Relative volatility of a binary mixture changes appreciably with the minor change in ... unity (D) Flash distillation is practised on wide spread scale in petroleum refinery

Last Answer : (B) Relative volatility of a binary mixture changes appreciably with the minor change in temperature

According to the Fenske equation, what will be the minimum number of plates required in a distillation column to separate an equimolar binary mixture of components A and B into an overhead fraction containing 99 mol% A and a bottom fraction containing 98 mol% B ? Assume that relative volatility (αAB = 2) does not change appreciably in the column. (A) 5 (B) 9 (C) 12 (D) 28

Description : According to the Fenske equation, what will be the minimum number of plates required in a distillation column to separate an equimolar binary mixture of components A and B into an overhead fraction containing 99 mol% A and a ... in the column. (A) 5 (B) 9 (C) 12 (D) 28

Last Answer : (C) 12

In case of __________ reactions, the reaction rate does not decrease appreciably as the reaction proceeds. (A) Catalytic (B) Parallel (C) Series (D) Auto catalytic

Description : In case of __________ reactions, the reaction rate does not decrease appreciably as the reaction proceeds. (A) Catalytic (B) Parallel (C) Series (D) Auto catalytic

Last Answer : (D) Auto catalytic

The rate of reaction does not decrease appreciably as the reaction proceeds in case of __________ reactions. (A) Autocatalytic (B) Exothermic (C) Endothermic (D) Autothermal

Description : The rate of reaction does not decrease appreciably as the reaction proceeds in case of __________ reactions. (A) Autocatalytic (B) Exothermic (C) Endothermic (D) Autothermal

Last Answer : (A) Autocatalytic

Which halogen does not appreciably react with methane in a free-radical substitution reaction? (a) chlorine (b) bromine (c) iodine (d) fluorine

Description : Which halogen does not appreciably react with methane in a free-radical substitution reaction? (a) chlorine (b) bromine (c) iodine (d) fluorine

Last Answer : iodine

What is the name of the device that provides an increase in current, voltage, or power of a signal without appreciably altering the original signal?

Description : What is the name of the device that provides an increase in current, voltage, or power of a signal without appreciably altering the original signal?

Last Answer : Amplifier.

Found a rusted, circular floor grate from the 1800's. What should I do with it?

Description : Found a rusted, circular floor grate from the 1800's. What should I do with it?

Last Answer : Turn it into a wall hanging.

A box contains 50 bolts and 150 nuts. On checking the box, it was found that half of the bolts and half of the nuts are rusted. -Maths 9th

Description : A box contains 50 bolts and 150 nuts. On checking the box, it was found that half of the bolts and half of the nuts are rusted. -Maths 9th

Last Answer : Total number of nuts and bolts in the box = 150 + 50 = 200 Number of nuts and bolts rusted = 1 / 2 × 200 = 100 P(a rusted nut or bolt) = 100 / 200 = 1 / 2

A box contains 50 bolts and 150 nuts. On checking the box, it was found that half of the bolts and half of the nuts are rusted. -Maths 9th

Description : A box contains 50 bolts and 150 nuts. On checking the box, it was found that half of the bolts and half of the nuts are rusted. -Maths 9th

Last Answer : Total number of nuts and bolts in the box = 150 + 50 = 200 Number of nuts and bolts rusted = 1 / 2 × 200 = 100 P(a rusted nut or bolt) = 100 / 200 = 1 / 2

What to lubricate rusted pliers with?

Description : How to lubricate splitter pliers that are rusty and do not want to work?

Last Answer : They need to be cut off first. For relaxation and agitation, the WD 40, perhaps an even better MD40, could help, but it's time to let it go. Sometimes to loosen rust, soaking in kerosene or diesel ... WD 40 will be good and functional. Of course, another oil can also be used. But never kitchen.

Why does not stainless steel get rusted easily ?

Description : Why does not stainless steel get rusted easily ?

Last Answer : Why does not stainless steel get rusted easily ? A. Chromium and nickel combine with iron B. ... a hard chemical compound with chromium present in it.

I am a single parent and my roof needs to be replaced I have a metal roof and it has leaked in 2 spots and is all rusted. Is there any assistance for me Thank you Candi Clinard ?

Description : I am a single parent and my roof needs to be replaced I have a metal roof and it has leaked in 2 spots and is all rusted. Is there any assistance for me Thank you Candi Clinard ?

Last Answer : sweetie there sure is, those old tin roofs are not the best for living I would remove the old roof and replace it with a more modern one about $800 or do

can the floor under the drivers seat be repaired. It is all rusted out.?

Description : can the floor under the drivers seat be repaired. It is all rusted out.?

Last Answer : Any metal area can either be repaired or replaced, just depending on the car how easy or not that will be. If repair or replacement panels are not available they can be made. Floyd West Klassic Rides LLC 704- ... It also depends on how new the car is and if they can find an old one at the junkyard.

is a common troubles in the operation of Mower. a) Knives get twisted. b) Knives get melted. c) Knives gets rusted. d) Knives gets break

Description : is a common troubles in the operation of Mower. a) Knives get twisted. b) Knives get melted. c) Knives gets rusted. d) Knives gets break

Last Answer : Knives gets break

How to Repair Rusted Truck Frames

Description : How to Repair Rusted Truck Frames

Last Answer : How to Repair Rusted Truck Frames If you love your truck and more importantly love to work on trucks, one project that many tackle is to restore older trucks, jeeps, SUV's, etc to their old glory. ... the patch was welded. Now that the primer has dried, finish the frame with paint and you are done.

What is the weight of an object on the moon compared to the earth ?

Description : What is the weight of an object on the moon compared to the earth ?

Last Answer : The weight of an object on the moon will be one sixth of that of the earth.

Weight of 1 m3 of humid air as compared to 1 m3 of dry air, under the same conditions, is (A) Less (B) More (C) Same (D) Unpredictable

Description : Weight of 1 m3 of humid air as compared to 1 m3 of dry air, under the same conditions, is (A) Less (B) More (C) Same (D) Unpredictable

Last Answer : (A) Less

The most important function of a washer is to provide bearing area and washers are normally specified by their hole diameters. The diameter of washer as compared to the nut is (A) More (B) Less (C) Same (D) More but less than the diameter of bolt

Description : The most important function of a washer is to provide bearing area and washers are normally specified by their hole diameters. The diameter of washer as compared to the nut is (A) More (B) Less (C) Same (D) More but less than the diameter of bolt

Last Answer : (A) More

merchandising company using a perpetual system will make a. the same number of adjusting entries as a service company does. b. one more adjusting entry than a service company does. c. one less adjusting entry than a service company does. d. different types of adjusting entries compared to a service company.

Description : merchandising company using a perpetual system will make a. the same number of adjusting entries as a service company does. b. one more adjusting entry than a service company does. c. one ... than a service company does. d. different types of adjusting entries compared to a service company.

Last Answer : c. one less adjusting entry than a service company does.

The weight of the object is less at the equator than at the poles.

Description : The weight of the object is less at the equator than at the poles.

Last Answer : Ans: The weight of an object is the product of mass and force of gravity. The equatorial diameter is more than the polar diameter. Thus, the force of gravity is more at the poles and the weight is more there.

The weight of the object is less at the equator than at the poles.

Description : The weight of the object is less at the equator than at the poles.

Last Answer : Ans: At equator, the distance from the earth's center is greater than any other point of the earth's surface. Since, weight is defined as the force with which a body is attracted towards the earth's ... the force applied. Hence, the object's weight is lightest at the earth's equator, than at poles.

What is the mass of an object on the moon compared to the earth ?

Description : What is the mass of an object on the moon compared to the earth ?

Last Answer : The mass of an object on the moon will be one-fifth of that of the earth.

In radiocarbon dating the carbon -14 levels in the object being dated are compared with?

Description : In radiocarbon dating the carbon -14 levels in the object being dated are compared with?

Last Answer : In radiocarbon dating, the carbon-14 levels in the object beingdated are compared with _____.

In radiocarbon dating the carbon-14 levels in the object being dated are compared with .?

Description : In radiocarbon dating the carbon-14 levels in the object being dated are compared with .?

Last Answer : In radiocarbon dating, the carbon-14 levels in the object beingdated are compared with _____.

Convex mirrors are used as a rear view mirror in motor cycles because (1) it forms real image (2) it forms erect (upright) image (3) it forms smaller image as compared with object (4) All of the above

Description : Convex mirrors are used as a rear view mirror in motor cycles because (1) it forms real image (2) it forms erect (upright) image (3) it forms smaller image as compared with object (4) All of the above

Last Answer : (3) it forms smaller image as compared with object Explanation: It is because image formed by an convex mirror is always virtual, erect and smaller than the object.

When the image formed by a convex mirror is compared to its object, the image is usually: w) erect and smaller x) inverted and imaginary y) real and inverted z) real and erect

Description : When the image formed by a convex mirror is compared to its object, the image is usually: w) erect and smaller x) inverted and imaginary y) real and inverted z) real and erect

Last Answer : ANSWER: W -- ERECT AND SMALLER

Convex mirrors are used as a rear view mirror in motor cycles because (1) it forms real image (2) it forms erect (upright) image (3) it forms smaller image as compared with object (4) All of the above

Description : Convex mirrors are used as a rear view mirror in motor cycles because (1) it forms real image (2) it forms erect (upright) image (3) it forms smaller image as compared with object (4) All of the above

Last Answer : it forms smaller image as compared with object

The refrigeration effect in a dry evaporator compared to flooded evaporator in a similar plant is (a) same (b) more (c) less (d) more or less depending on ambient conditions

Description : The refrigeration effect in a dry evaporator compared to flooded evaporator in a similar plant is (a) same (b) more (c) less (d) more or less depending on ambient conditions

Last Answer : Ans: c

The specific fuel consumption of a petrol engine compared to diesel engine of same H.P is A. same B.more C. less D. unpredictable

Description : The specific fuel consumption of a petrol engine compared to diesel engine of same H.P is A. same B.more C. less D. unpredictable

Last Answer : ANSWER : B

The air requirement of a petrol engine during starting compared to the theoretical air requirement for complete combustion is A. more B.unpredictable C. same D. less

Description : The air requirement of a petrol engine during starting compared to the theoretical air requirement for complete combustion is A. more B.unpredictable C. same D. less

Last Answer : ANSWER : D

The area of actual indicator diagram on an air compressor as compared to area of ideal indicator diagram is A. Less B. More C. Same D. Unpredictable

Description : The area of actual indicator diagram on an air compressor as compared to area of ideal indicator diagram is A. Less B. More C. Same D. Unpredictable

Last Answer : ANSWER : B

The air requirement of a petrol engine during starting compared to theoretical air required for complete combustion is a. more b. less c. same d. may be more or less depending on engine capacity

Description : The air requirement of a petrol engine during starting compared to theoretical air required for complete combustion is a. more b. less c. same d. may be more or less depending on engine capacity

Last Answer : ANSWER b. less

Diesel as compared to petrol is a. more difficult to ignite b. less difficult to ignite c. highly ignitable d. just about the same difficult to ignite

Description : Diesel as compared to petrol is a. more difficult to ignite b. less difficult to ignite c. highly ignitable d. just about the same difficult to ignite

Last Answer : ANSWER a. more difficult to ignite

In diesel engine, the compression ratio as compared with the expansion ratio is a. same b. less c. more d. variable

Description : In diesel engine, the compression ratio as compared with the expansion ratio is a. same b. less c. more d. variable

Last Answer : ANSWER c. more

The sum of masses of two nuclei produced in nuclear fission compared to the mass of original nucleus is (A) Less (B) More (C) Same (D) Much more

Description : The sum of masses of two nuclei produced in nuclear fission compared to the mass of original nucleus is (A) Less (B) More (C) Same (D) Much more

Last Answer : (A) Less

The equilibrium liquid composition compared to the vapor composition in case of Azeotropic mixture is (A) More (B) Less (C) Same (D) Either more or less; depends on the system

Description : The equilibrium liquid composition compared to the vapor composition in case of Azeotropic mixture is (A) More (B) Less (C) Same (D) Either more or less; depends on the system

Last Answer : (C) Same

Pressure drop through plate tower as compared to that through packed tower, for the same duty will be (A) Less (B) More (C) Equal (D) Either (A) or (B); depends on the packing height

Description : Pressure drop through plate tower as compared to that through packed tower, for the same duty will be (A) Less (B) More (C) Equal (D) Either (A) or (B); depends on the packing height

Last Answer : (B) More

The equivalent diameter for the annulus of a double pipe heat exchanger, whose inner pipe has fins on the outside is __________ compared to the same size pipes without fins. (A) More (B) Less (C) Same (D) Unpredictable

Description : The equivalent diameter for the annulus of a double pipe heat exchanger, whose inner pipe has fins on the outside is __________ compared to the same size pipes without fins. (A) More (B) Less (C) Same (D) Unpredictable

Last Answer : (B) Less

In case of a super-cooled solution, which is on the verge of crystallisation, the free energy of the solution as compared to that of the solid is (A) More (B) Less (C) Same (D) More or less; depends on the nature of solution

Description : In case of a super-cooled solution, which is on the verge of crystallisation, the free energy of the solution as compared to that of the solid is (A) More (B) Less (C) Same (D) More or less; depends on the nature of solution

Last Answer : (A) More

A concentric double pipe heat exchanger as compared to the shell and tube heat exchanger for the same heat load requires (A) Less heating surface (B) More space (C) Lower maintenance cost (D) None of these

Description : A concentric double pipe heat exchanger as compared to the shell and tube heat exchanger for the same heat load requires (A) Less heating surface (B) More space (C) Lower maintenance cost (D) None of these

Last Answer : (B) More space

Power required in case of forced draught as compared to induced draught (for the same draught produced) is (A) Same (B) Less (C) More (D) Either more or less; depends on the flue gas density

Description : Power required in case of forced draught as compared to induced draught (for the same draught produced) is (A) Same (B) Less (C) More (D) Either more or less; depends on the flue gas density

Last Answer : (B) Less

Ceramic recuperators compared to metallic recuperators for the same duty (A) Are lighter (B) Occupy more space (C) Are less costly (D) Have higher pressure differential between flue gas & air side

Description : Ceramic recuperators compared to metallic recuperators for the same duty (A) Are lighter (B) Occupy more space (C) Are less costly (D) Have higher pressure differential between flue gas & air side

Last Answer : (B) Occupy more space