Water vapour beyond the dew point result in A. Precipitation B. Hailstorm C. Condensation D. Formation of ice

1 Answer

Answer :

ANSWER: C

Related questions

Description : Water vapour beyond the dew point result in-----? A. Precipitation B. Hailstorm C. Condensation (Answer) D. Formation of ice

Last Answer : C. Condensation (Answer)

Description : What is the temperature at which the water vapour in the mixture of water vapour in air, starts condensing called? A. condensation temperature B. dew point temperature C. vaporization temperature D. all of the above

Last Answer : ANSWER : B

Description : What is Water vapour beyond the dew point? -Do You Know?

Last Answer : answer:

Description : What is Water vapour beyond the dew point?

Last Answer : Condensation

Description : On large generators, space heaters are used to ____________. A. keep the machine at ambient tmperature of the machinery space B. maintain rotor and stator winding temperatures above the dew point ... C. prevent condensation in the lube oil D. prevent electrolysis due to condensation in the bearings

Last Answer : Answer: B

Description : What has to happen for Condensation to occur in nature air must be cooled to its dew point and there must be some kind of solid surface present true or false?

Last Answer : 1

Description : Moist air is cooled along the line of constant __________ , when it is passed over a cold & dry cooling coil, such that no condensation occurs? (A) Enthalpy (B) Relative humidity (C) Wet bulb temperature (D) Dew point temperature

Last Answer : (D) Dew point temperature

Description : Condensation starts at ________ point. A Dew B Bubble C Triple D none of the mentioned

Last Answer : A Dew

Description : Condensation starts ________ point. A] Dew point B] Bubble point C] Triple point D] None of the mentioned

Last Answer : A] Dew point

Description : When dew point la reached it is said that at that temperature (a) the atmosphere is said to be saturated with water vapour (b) the relative humidity of the atmosphere is 100% (c) the atmosphere can hold no more water vapour (d) All the above

Last Answer : Ans: (a)

Description : The dew point is the: a. Dry bulb temperature on a psychrometer b. Temperature at which water vapour will start to be absorbed into the air c. Temperature below which water vapour will start to ... vapour will start to condense out of the air e. Temperature at which water will start to evaporate

Last Answer : Answer: C

Description : The temperature at which the air cannot hold all the water vapour mixed in it and some vapour starts condensing is called as A. humidification temperature B. dehumidification temperature C. dew point temperature D. none of the above

Last Answer : ANSWER : C

Description : An air-water vapour mixture has a dry bulb temperature of 60°C and a dew point temperature of 40°C. The total pressure is 101.3 kPa and the vapour pressure of water at 40°C and 60°C are 7.30 kPa and 19.91 kPa respectively ... air is: (A) 0.048 (B) 0.079 (C) 0.122 (D) 0.152

Last Answer : (D) 0.152

Description : Water vapour turns into clouds in the atmosphere when: A. It rains B. The temperature rise C. Dew point is reached (Answer) D. Evaporation takes place

Last Answer : C. Dew point is reached (Answer)

Description : When dry bulb temperature & wet bulb temperature of moist air is the same, it means that the (A) Partial pressure of water vapour is less than the total pressure (B) Humidity is < 100% & dew ... Dew point temperature of air has not reached & air is not saturated fully (D) Air is fully saturated

Last Answer : (D) Air is fully saturated

Description : An indication of sensible heat content in air-water vapour mixture is a) wet bulb temperature b) dew point temperature c) density of air d) dry bulb temperature

Last Answer : d) dry bulb temperature

Description : A mixture of 10% C6H6 vapour in air at 25°C and 750 mm Hg has a dew point of 20°C. Its dew point at 30°C and 700 mm Hg will be around __________ °C. (A) 21.7 (B) 20 (C) 27.3 (D) 18.7

Last Answer : (D) 18.7

Description : Dew point of a gas-vapour mixture (A) Increases with temperature rise (B) Decreases with temperature rise (C) Decreases with decrease in pressure (D) Increases with increase in pressure

Last Answer : (C) Decreases with decrease in pressure

Description : The temperature to which a vapour gas mixture must be cooled (at varying humidity) to become saturated is called the __________ temperature. (A) Dew point (B) Wet bulb (C) Dry bulb (D) None of these

Last Answer : (D) None of these

Description : Steady state temperature reached by a small amount of liquid evaporating into a large amount of unsaturated vapour-gas mixture is called the __________ temperature. (A) Dry-bulb (B) Wet-bulb (C) Dew point (D) Adiabatic saturation

Last Answer : (B) Wet-bulb

Description : The degree of aridness of a geographic region is generally defined as the ratio of precipitation to: w) condensation x) evaporation y) transpiration z) snowpack depth

Last Answer : ANSWER: X -- EVAPORATION

Description : The chapter used the phrase -soul filled with sadness . Which of the following expressions is TRUE with respect to the phrase? (a) Hailstorm destroyed the entire crop. (b) Very large hailstones began to ... c) The flowers were gone from the plants. (d) A plague of locusts destroyed Lencho s crops.

Last Answer : (a) Hailstorm destroyed the entire crop.

Description : A Mixture of dry air and water,the formation of fog starts when, A. air temperature is equal to the dew point temperature B. air temperature is greater than the dew point temperature C. both a. and b. D. none of the above

Last Answer : ANSWER : A

Description : When air passes through silica gel, A. it absorbs water vapour molecules B. latent heat of condensation is released C.dbt of air increases D. all of the mentioned

Last Answer : ANSWER : D

Description : Condensation process refers to : (1) Conversion of water into water vapour (2) Conversion of water vapour into solid form (3) Conversion of water into solid form (4) Conversion of water vapour into its liquid form

Last Answer : (4) Conversion of water vapour into its liquid form Explanation: Condensation is the change of the physical state of matter from gas phase into liquid phase. It is also defined as teh change in the state of water vapour to liquid water when in contact with a liquid or solid surface.

Description : Use of excess of combustion air in the combustion of fuels results in (A) Heat losses (B) Long flame (C) Condensation of water vapour from the fuel gas (D) None of these

Last Answer : (A) Heat losses

Description : The lower horizontal line of the refrigeration cycle plotted on pressure-enthalpy-diagram represents (a) condensation of the refrigerant vapour (b) evaporation of the refrigerant liquid (c) compression of the refrigerant vapour (d) metering of the refrigerant liquid

Last Answer : Ans: b

Description : Condensation of a vapour-gas mixture just begins, when (where, p = partial pressure of the vapour P = vapour pressure of the liquid). (A) p = P (B) p >>P (C) p < P (D) p

Last Answer : (A) p = P

Description : Presence of a non-condensing gas in a condensing vapour (A) Increases the rate of condensation (B) Decreases thermal resistance (C) Is desirable to increase the film co-efficient (D) None of these

Last Answer : (D) None of these

Description : LMTD can't be used as such without a correction factor for the (A) Multipass heat exchanger (B) Baffled heat exchanger (C) Condensation of mixed vapour in a condenser (D) All (A) (B) and (C)

Last Answer : (D) All (A) (B) and (C)

Description : In steam and other vapour cycles, the process of removing noncondensable is called [GATE-1992] (a) Scavenging process (b) Deaeration process (c) Exhaust process (d) Condensation process  

Last Answer : (b) Deaeration process  

Description : Pick out the correct statement about the condensation. (A) Filmwise condensation gives a lower heat transfer rate than the dropwise condensation (B) Suitable coating or vapour additive is used to promote film ... place on it (D) Reynolds number of condensing liquid is based on its mass flow rate

Last Answer : (B) Suitable coating or vapour additive is used to promote film wise condensation

Description : A standard ice point temperature corresponds to the temperature of (a) water at 0°C (b) ice at - 4°C (c) mixture of ice, water and vapour under equilibrium conditions under NTP conditions (d) mixture of ice and water Under equilibrium conditions.

Last Answer : Ans: D

Description : Frozen dew is also known as----? A. Frost B. Black ice (Answer) C. Frozen ice D. Black hail

Last Answer : B. Black ice (Answer)

Description : In ice cap climate extremely meagre precipitation in the form of snow is found. 

Last Answer : Identify the correct correlation: A - In ice cap climate extremely meagre precipitation in the form of ... but R is not the correct explanation of A.

Description : Gallstones are most often the result of: a) gallbladder irritation b) eating cherries and swallowing the pits c) precipitation of cholesterol d) accumulated bile pigment

Last Answer : ANSWER: C -- precipitation of cholesterol 

Description : Which books from the "Song of Ice and Fire" series can I read if I don't want to go beyond where we are at the end of Season 4?

Last Answer : You can safely read books 1 & 2 for sure. I have not finished the others to tell you if you are safe to read them, but I think the television series is working on book 4. Hopefully someone else can tell you a definitely stopping point, but while you wait, you can start with the first two.

Description : What is A long period of climate cooling during which ice sheets spread beyond the polar regions is called a?

Last Answer : ?

Description : $ The process of formation of polysaccharides by condensation of monomers is called hydrolysis. Glycogen is a stored food materials found in plants.

Last Answer : $ The process of formation of polysaccharides by condensation of monomers is called hydrolysis. Glycogen is a ... D. If both As and R are wrong.

Description : The initial step of the citric acid cycle is (A) Conversion of pyruvate to acetyl-CoA (B) Condensation of acetyl-CoA with oxaloacetate (C) Conversion of citrate to isocitrate (D) Formation of α -ketoglutarate catalysed by isocitrate dehydrogenase

Last Answer : Answer : B

Description : The formation of citrate from oxalo acetate and acetyl CoA is (A) Oxidation (B) Reduction (C) Condensation (D) Hydrolysis CARBOHYDRATES AND CARBOHYDRATE METABOLISM 17

Last Answer : C

Description : In case of physical adsorption, the difference between heat of adsorption and heat of normal condensation is (A) Equal to the heat of formation of surface compound (B) Equal to the heat of wetting (C) Zero (D) Called integral heat of adsorption

Last Answer : (B) Equal to the heat of wetting

Description : Function of matrix band: A. Substitute for the missing wall so adequate condensation forces can be applied B. Permit re-establishment of proper contact lines C. Restrict extrusion of amalgam and prevent ... E. Provide an acceptable surface texture to the proximal surface F. All of the above

Last Answer : F. All of the above

Description : Mist is caused by – (1) dry ice (2) ice at low temperature (3) water vapour at low temperature (4) carbon-monoxide in solid form

Last Answer : (3) water vapour at low temperature Explanation: Mist is a phenomenon caused by small droplets of water suspended in air. It can occur as part of natural weather or volcanic activity, and ... canisters if the humidity conditions are right. The only difference between mist and fog is visibility.

Description : Degree of freedom of the system ice-water-vapour will be (A) 0 (B) 1 (C) 2 (D) 3

Last Answer : (A) 0

Description : Mist is caused by (1) dry ice (2) ice at low temperature (3) water vapour at low temperature (4) carbon-monoxide in solid form 

Last Answer : water vapour at low temperature

Description : Moisture damage, as a result of condensation occurring inside of the cargo winch master switches, can be reduced by __________________. A. installing a light bulb in the pedestal stand B. coating the ... epoxy sealer C. venting the switch box regularly D. using strip heaters inside the switch box

Last Answer : Answer: D

Description : Rough surface/Porosity of porcelain is a result of: A. Lack of compression/ condensation B. Sudden high temperature

Last Answer : A. Lack of compression/ condensation

Description : The formation of micelles occurs only beyond a certain temperature. What is the temperature called ?

Last Answer : Ans. Kraft temperature