Which of the following exemplifies an adiabatic process? (A) Melting of ice (B) CWhich of the following exemplifies an adiabatic process? (A) Melting of ice (B) Condensation of alcohol vapor (C) Sudden bursting of a cycle tube (D) Evaporation of water ondensation of alcohol vapor (C) Sudden bursting of a cycle tube (D) Evaporation of water

Which of the following exemplifies an adiabatic process? (A) Melting of ice
(B) Condensation of alcohol vapor
(C) Sudden bursting of a cycle tube
(D) Evaporation of water
by

1 Answer

Answer :

C) Sudden bursting of a cycle tube
by

Related questions

Melting of ice exemplifies a/an (A) Adiabatic process (B) Endothermic reaction (C) Exothermic reaction (D) Process involving a chemical reaction

Description : Melting of ice exemplifies a/an (A) Adiabatic process (B) Endothermic reaction (C) Exothermic reaction (D) Process involving a chemical reaction

Last Answer : (B) Endothermic reaction

Change of state namely evaporation condensation, freezing and melting is an __________ process. (A) Isothermal (B) Adiabatic (C) Isobaric (D) Isochoric

Description : Change of state namely evaporation condensation, freezing and melting is an __________ process. (A) Isothermal (B) Adiabatic (C) Isobaric (D) Isochoric

Last Answer : (A) Isothermal

Leidenfrost point is a term concerned with the (A) Condensation of the saturated vapor on a cold surface (B) Concentration of a corrosive solution by evaporation (C) Heat transfer between two highly viscous liquids (D) Boiling of a liquid on a hot surface

Description : Leidenfrost point is a term concerned with the (A) Condensation of the saturated vapor on a cold surface (B) Concentration of a corrosive solution by evaporation (C) Heat transfer between two highly viscous liquids (D) Boiling of a liquid on a hot surface

Last Answer : (D) Boiling of a liquid on a hot surface

An approximately __________ process exemplifies the flow of a gas through a very long pipe of uniform cross-section. (A) Adiabatic (B) Isothermal (C) Isentropic (D) Isochoric

Description : An approximately __________ process exemplifies the flow of a gas through a very long pipe of uniform cross-section. (A) Adiabatic (B) Isothermal (C) Isentropic (D) Isochoric

Last Answer : (B) Isothermal

The changing of solid directly to vapor without passing through liquid state is called  a. Evaporation  b. Vaporization  c. Sublimation  d. Condensation

Description : The changing of solid directly to vapor without passing through liquid state is called  a. Evaporation  b. Vaporization  c. Sublimation  d. Condensation

Last Answer : Sublimation

Melting of ice is an example of an __________ process. (A) Adiabatic (B) Isothermal (C) Isometric (D) None of these

Description : Melting of ice is an example of an __________ process. (A) Adiabatic (B) Isothermal (C) Isometric (D) None of these

Last Answer : (B) Isothermal

How is the relationship between freezing and melting similar to the relationship between condensation and evaporation?

Description : How is the relationship between freezing and melting similar to the relationship between condensation and evaporation?

Last Answer : do not knowhow 2 do this problemcan u plz help me

Define the term melting, boiling, evaporation, condensation, freezing.

Description : Define the term melting, boiling, evaporation, condensation, freezing.

Last Answer : ∗ Melting:- The temperature at which things melt is called melting. ∗ Boiling:- The temperature at which liquid things boil is called boiling point. ∗ Evaporation:- When water is heated, it changes into ... . ∗ Freezing. When water is cooled, it freezes into form of ice. This is called freezing.

Which of the following illustrations is not based on the principle of pressure? (a) Swelling of raisins in water (b) Collecting lotion with an eye dropper (c) Bursting of a cycle tube in summer (d) Rise I water in a drinking straw

Description : Which of the following illustrations is not based on the principle of pressure? (a) Swelling of raisins in water (b) Collecting lotion with an eye dropper (c) Bursting of a cycle tube in summer (d) Rise I water in a drinking straw

Last Answer : Ans:(a)

Condensing film co-efficient for steam on horizontal tubes ranges from 5000 to 15000 Kcal/hr.m2 .°C. Condensation of vapor is carried out inside the tube in a shell and tube heat exchanger, when the (A) Higher condensing film co-efficient is desired (B) Condensate is corrosive in nature (C) Lower pressure drop through the exchanger is desired (D) Temperature of the incoming vapor is very high Answer: Option B

Description : Condensing film co-efficient for steam on horizontal tubes ranges from 5000 to 15000 Kcal/hr.m2 .°C. Condensation of vapor is carried out inside the tube in a shell and tube heat ... drop through the exchanger is desired (D) Temperature of the incoming vapor is very high

Last Answer : (B) Supersaturated

In a refrigerator what produces the cooling? (1) The ice which deposits on the freezer (2) The sudden expansion of a compressed gas (3) The evaporation of a volatile liquid (4) None of these

Description : In a refrigerator what produces the cooling? (1) The ice which deposits on the freezer (2) The sudden expansion of a compressed gas (3) The evaporation of a volatile liquid (4) None of these

Last Answer : (4) None of these Explanation: Basically, refrigeration system consists of devices that compress and expand refrigerant gas. When refrigerant gas is compressed it expels heat and when it is suddenly ... inside of the fridge is cooled to a temperature below the ambient temperature of the room.

In a refrigerator what produces the cooling ? (1) The ice which deposits on the freezer (2) The sudden expansion of a compressed gas (3) The evaporation of a volatile liquid (4) None of these

Description : In a refrigerator what produces the cooling ? (1) The ice which deposits on the freezer (2) The sudden expansion of a compressed gas (3) The evaporation of a volatile liquid (4) None of these

Last Answer : None of these

The lower horizontal line of the refrigeration cycle plotted on pressure-enthalpy-diagram represents (a) condensation of the refrigerant vapour (b) evaporation of the refrigerant liquid (c) compression of the refrigerant vapour (d) metering of the refrigerant liquid

Description : The lower horizontal line of the refrigeration cycle plotted on pressure-enthalpy-diagram represents (a) condensation of the refrigerant vapour (b) evaporation of the refrigerant liquid (c) compression of the refrigerant vapour (d) metering of the refrigerant liquid

Last Answer : Ans: b

The process of breaking up or liquid into fine droplets by spraying is A. vaporization B. atomization C. condensation D. evaporation

Description : The process of breaking up or liquid into fine droplets by spraying is A. vaporization B. atomization C. condensation D. evaporation

Last Answer : ANSWER : B

When a gas turns into a liquid the process is called: A. Condensation B. Evaporation C. Deposition D. Sublimation

Description : When a gas turns into a liquid the process is called: A. Condensation B. Evaporation C. Deposition D. Sublimation

Last Answer : ANSWER: A

When a gas turns into a liquid the process is called: A. Condensation B. Evaporation C. Deposition D. Sublimation

Description : When a gas turns into a liquid the process is called: A. Condensation B. Evaporation C. Deposition D. Sublimation

Last Answer : ANSWER: A

When a gas turns into a liquid the process is called: A. Condensation B. Evaporation C. Deposition D. Sublimation

Description : When a gas turns into a liquid the process is called: A. Condensation B. Evaporation C. Deposition D. Sublimation

Last Answer : ANSWER: A

When a gas turns into a liquid the process is called: A. Condensation B. Evaporation C. Deposition D. Sublimation

Description : When a gas turns into a liquid the process is called: A. Condensation B. Evaporation C. Deposition D. Sublimation

Last Answer : ANSWER: A

Process through which plants reproduce – (1) Pollination (2) Condensation (3) Eating (4) Evaporation

Description : Process through which plants reproduce – (1) Pollination (2) Condensation (3) Eating (4) Evaporation

Last Answer : (1) Pollination Explanation: Pollination is the process by which pollen is transferred from the anther (male part) to the stigma (female part) of the plant, thereby enabling fertilization and reproduction. This takes place in the angiosperms, the flower bearing plants.

Process through which plants reproduce (1) Pollination (2) Condensation (3) Eating (4) Evaporation

Description : Process through which plants reproduce (1) Pollination (2) Condensation (3) Eating (4) Evaporation

Last Answer : Pollination

What is a physical process by which vapor becomes liquid or solid the opposite of evaporation?

Description : What is a physical process by which vapor becomes liquid or solid the opposite of evaporation?

Last Answer : condensation

For the air water system under ambient conditions, the adiabatic saturation temperature and the wet bulb temperature are nearly equal, because (A) Water has a high latent heat of evaporation (B) Lewis number is close to unity (C) They are always equal under all circumstances

Description : For the air water system under ambient conditions, the adiabatic saturation temperature and the wet bulb temperature are nearly equal, because (A) Water has a high latent heat of evaporation (B) Lewis number is close to unity (C) They are always equal under all circumstances

Last Answer : (A) Water has a high latent heat of evaporation

Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure to the air with a wet bulb temperature of 60°C, then both the approach & the range would be 10°C (C) For unsaturated air-water vapor mixture at atmospheric conditions, the wet bulb temperature & adiabatic cooling lines are the same (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Description : Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure ... & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Last Answer : (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Swenson-Walker crystalliser is a __________ unit. (A) Continuous (B) Batch (C) Semi-batch (D) Cooling (adiabatic)-cum-evaporation

Description : Swenson-Walker crystalliser is a __________ unit. (A) Continuous (B) Batch (C) Semi-batch (D) Cooling (adiabatic)-cum-evaporation

Last Answer : (A) Continuous

Removal of __________ heat is involved in the condensation of a vapor under saturated conditions. (A) Super (B) Sensible (C) Latent (D) Both (B) & (C)

Description : Removal of __________ heat is involved in the condensation of a vapor under saturated conditions. (A) Super (B) Sensible (C) Latent (D) Both (B) & (C)

Last Answer : (B) Sensible

If air (a non-condensing gas) is present in a condensing vapor stream, it will __________ the condensation rate of vapor. (A) Increase (B) Decrease (C) Not affect (D) Increase the condensing film co-efficient as well as

Description : If air (a non-condensing gas) is present in a condensing vapor stream, it will __________ the condensation rate of vapor. (A) Increase (B) Decrease (C) Not affect (D) Increase the condensing film co-efficient as well as

Last Answer : (B) Decrease

Smog is (A) Nothing but black smoke (B) A combination of smoke and fog (C) A liquid particle resulting from vapor condensation (D) A solid particle e.g. fly-ash

Description : Smog is (A) Nothing but black smoke (B) A combination of smoke and fog (C) A liquid particle resulting from vapor condensation (D) A solid particle e.g. fly-ash

Last Answer : (B) A combination of smoke and fog

Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation (B) Cavitation may be caused due to boiling of liquid by decreasing the pressure resulting in formation & collapse of vapor cavities (C) Cavitation begins at higher static pressure and lower velocity in larger diameter pipelines resulting in audible noise(D) Large scale cavitation cannot damage pipeline, restrict fluid flow anddamage steam turbine blades

Description : Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation ... (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

Last Answer : (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

What is the process of melting also called? (1) Fusion (2) Galvanisation (3) Crystallisatiorn (4) Evaporation

Description : What is the process of melting also called? (1) Fusion (2) Galvanisation (3) Crystallisatiorn (4) Evaporation

Last Answer : (1) Fusion Explanation: Melting, or fusion. is a physical process that results in the phase transition of a substance from a solid to a liquid.

Which method, vapor phase oxidation or direct-melt process, transforms deposited material into a solid glass preform by heating the porous material without melting?

Description : Which method, vapor phase oxidation or direct-melt process, transforms deposited material into a solid glass preform by heating the porous material without melting?

Last Answer : Vapor phase oxidation.

Is define as the ratio of the actual pressure of the vapor  a. Relative Humidity  b. Humidity Ratio  c. Dew Point  d. Adiabatic Saturation

Description : Is define as the ratio of the actual pressure of the vapor  a. Relative Humidity  b. Humidity Ratio  c. Dew Point  d. Adiabatic Saturation

Last Answer : Relative Humidity

The loss of water in the form of vapor from the surface of plant leaves is referred to as: a. Transpiration b. Respiration c. Oxidation d. Condensation

Description : The loss of water in the form of vapor from the surface of plant leaves is referred to as: a. Transpiration b. Respiration c. Oxidation d. Condensation

Last Answer : Transpiration

____ is when water goes from a solid to a gas without passing through the liquid phase. a. Transfusion c. Evaporation b. Sublimation d. Condensation

Description : ____ is when water goes from a solid to a gas without passing through the liquid phase. a. Transfusion c. Evaporation b. Sublimation d. Condensation

Last Answer : b. Sublimation

The loss of water by plants in the form of vapor i called: a) evaporation b) transpiration c) evapotranspiration d) vaporization

Description : The loss of water by plants in the form of vapor i called: a) evaporation b) transpiration c) evapotranspiration d) vaporization

Last Answer : ANSWER: C -- evapotranspiration

What is defined as the direct conversion of a substance from the solid to the vapor state or vice versa without passing the liquid state?  A. Condensation  B. Vaporization  C. Sublimation  D. Cryogenation

Description : What is defined as the direct conversion of a substance from the solid to the vapor state or vice versa without passing the liquid state?  A. Condensation  B. Vaporization  C. Sublimation  D. Cryogenation

Last Answer : Sublimation

The degree of aridness of a geographic region is generally defined as the ratio of precipitation to: w) condensation x) evaporation y) transpiration z) snowpack depth

Description : The degree of aridness of a geographic region is generally defined as the ratio of precipitation to: w) condensation x) evaporation y) transpiration z) snowpack depth

Last Answer : ANSWER: X -- EVAPORATION

Red phosphorous is changed into white phosphorous by (A) Heating in presence of light (B) Melting under pressure (C) Vaporisation followed by condensation (D) None of these

Description : Red phosphorous is changed into white phosphorous by (A) Heating in presence of light (B) Melting under pressure (C) Vaporisation followed by condensation (D) None of these

Last Answer : (C) Vaporisation followed by condensation

Rough surface/Porosity of porcelain is a result of: A. Lack of compression/ condensation B. Sudden high temperature

Description : Rough surface/Porosity of porcelain is a result of: A. Lack of compression/ condensation B. Sudden high temperature

Last Answer : A. Lack of compression/ condensation

Sudden temperature fluctuation does not affect pyrex glass, because of its (A) Low co-efficient of expansion (B) High co-efficient of expansion (C) High melting point (D) Both (B) and (C)

Description : Sudden temperature fluctuation does not affect pyrex glass, because of its (A) Low co-efficient of expansion (B) High co-efficient of expansion (C) High melting point (D) Both (B) and (C)

Last Answer : (A) Low co-efficient of expansion

Which of the following diagramInternal energy is equal to the heat absorbed in case of a/an __________ process. (A) Constant volume (B) Polytropic (C) Adiabatic (D) Constant pressure s does not represent an Otto cycle?

Description : Which of the following diagrams does not represent an Otto cyInternal energy is equal to the heat absorbed in case of a/an __________ process. (A) Constant volume (B) Polytropic (C) Adiabatic (D) Constant pressure cle?

Last Answer : (A) Constant volume

Pick out the wrong statement. (A) The net change in entropy in any reversible cycle is always zero (B) The entropy of the system as a whole in an irreversible process increases (C) The entropy of the universe tends to a maximum (D) The entropy of a substance does not remain constant during a reversible adiabatic change

Description : Pick out the wrong statement. (A) The net change in entropy in any reversible cycle is always zero (B) The entropy of the system as a whole in an irreversible process increases (C) The ... to a maximum (D) The entropy of a substance does not remain constant during a reversible adiabatic change

Last Answer : (D) The entropy of a substance does not remain constant during a reversible adiabatic change

During which process do ice and snow on Earth move directly from the solid state into water vapor in the atmosphere?

Description : During which process do ice and snow on Earth move directly from the solid state into water vapor in the atmosphere?

Last Answer : During the process of Sublimation.

Define the following : Sublimation , Melting Point , Fusion , Evaporations , Boiling Point , Vapourization , Condensation , Deposition.

Description : Define the following : Sublimation , Melting Point , Fusion , Evaporations , Boiling Point , Vapourization , Condensation , Deposition.

Last Answer : Ans : Sublimation : Sublimation is the process in which some solids upon heating instead of changing into liquid state are converted directly into gaseous (vapour) state. Example : Ammonium Chloride ... happens from the gaseous phase into the solid phase directly, the change is called deposition.

The phenomenon of melting under pressure and freezing again when the pressure is reduced is known as  a. sublimation  b. condensation  c. deposition  d. regelation

Description : The phenomenon of melting under pressure and freezing again when the pressure is reduced is known as  a. sublimation  b. condensation  c. deposition  d. regelation

Last Answer : regelation

What is the amount of heat needed to turn 1 kg of the substance at its melting point from the solid to liquid state?  A. Heat of fusion  B. Heat of vaporation  C. Heat of condensation  D. Heat of fission

Description : What is the amount of heat needed to turn 1 kg of the substance at its melting point from the solid to liquid state?  A. Heat of fusion  B. Heat of vaporation  C. Heat of condensation  D. Heat of fission

Last Answer : Heat of fusion

Occurs when the vapor pressure equals the atmospheric pressure  a. Boiling  b. Melting  c. Freezing  d. Vaporizing

Description : Occurs when the vapor pressure equals the atmospheric pressure  a. Boiling  b. Melting  c. Freezing  d. Vaporizing

Last Answer : Boiling

The specific terms used in phase transitions  a. melting  b. evaporation  c. freezing  d. sublimation

Description : The specific terms used in phase transitions  a. melting  b. evaporation  c. freezing  d. sublimation

Last Answer : evaporation

Mechanical recompression evaporation is used in the production of (A) Alcohol (B) Distilled water (C) Salt (D) Fruits jam

Description : Mechanical recompression evaporation is used in the production of (A) Alcohol (B) Distilled water (C) Salt (D) Fruits jam

Last Answer : (B) Distilled water

A cycle tyre bursts suddenly. This represents an – (1) Isothermal process (2) Adiabatic process (3) Isochoric process (4) Isoboric process

Description : A cycle tyre bursts suddenly. This represents an – (1) Isothermal process (2) Adiabatic process (3) Isochoric process (4) Isoboric process

Last Answer : (2) Adiabatic process Explanation: When a tyre bursts suddenly energy is not immediately transferred between the system and the surrounding. So the process is adiabatic. There sudden expansion of its air ... tyre is cooled. In adiabatic process, heat neither enters the system nor leaves the system.