In an interphase heat transfer process, the equilibrium state corresponds to equality of temperature in the two phases, while the condition for equilibrium in an interphase mass transfer process is equality of (A) Concentrations (B) Chemical potentials (C) Activity co-efficients (D) Mass transfer co-efficients

In an interphase heat transfer process, the equilibrium state

corresponds to equality of temperature in the two phases, while the

condition for equilibrium in an interphase mass transfer process is equality

of

(A) Concentrations

(B) Chemical potentials

(C) Activity co-efficients

(D) Mass transfer co-efficients

by

1 Answer

Answer :

(A) Concentrations

by

Related questions

The necessary condition for phase equilibrium in a multiphase system of N components is that the (A) Chemical potentials of a given component should be equal in all phases (B) Chemical potentials of all components should be same in a particular phase (C) Sum of the chemical potentials of any given component in all the phases should be the same (D) None of these

Description : The necessary condition for phase equilibrium in a multiphase system of N components is that the (A) Chemical potentials of a given component should be equal in all phases (B) Chemical potentials of all ... potentials of any given component in all the phases should be the same (D) None of these

Last Answer : (A) Chemical potentials of a given component should be equal in all phases

The individual mass transfer co-efficients (moles/m2s) for absorption of a solute from a gas mixture into a liquid solvent are, KL = 4.5 and KG = 1.5. The slope of the equilibrium line is 3. Which of the following resistance (s) is (are) controlling? (A) Liquid side (B) Gas side (C) Interfacial (D) Both liquid and gas side

Description : The individual mass transfer co-efficients (moles/m2s) for absorption of a solute from a gas mixture into a liquid solvent are, KL = 4.5 and KG = 1.5. The slope of the equilibrium line is 3. Which of ... A) Liquid side (B) Gas side (C) Interfacial (D) Both liquid and gas side

Last Answer : (B) Gas side

The advantage of backward feed multiple effect evaporators over forward feed units is that (A) Heat sensitive material can be handled (B) There is no additional cost of pumping (C) Most concentrated liquid is at highest temperature (D) Equal heat transfer co-efficients exist in various effects

Description : The advantage of backward feed multiple effect evaporators over forward feed units is that (A) Heat sensitive material can be handled (B) There is no additional cost of pumping ... liquid is at highest temperature (D) Equal heat transfer co-efficients exist in various effects

Last Answer : (C) Most concentrated liquid is at highest temperature

Pick out the wrong statement. (A) Catalytic activity of enzyme catalysed reactions which is affected by temperature, pH value & chemical agents, is maximum at a temperature of about 45°C(B) Most of the enzyme catalysed reactions involve at least two substrates (C) Enzymes help in increasing the activation energy of the reaction (D) Equilibrium concentrations in enzyme catalysed reactions can be calculated by using the thermodynamic properties of substrates & prod

Description : Pick out the wrong statement. (A) Catalytic activity of enzyme catalysed reactions which is affected by temperature, pH value & chemical agents, is maximum at a temperature of about 45°C ... in enzyme catalysed reactions can be calculated by using the thermodynamic properties of substrates & prod

Last Answer : (C) Enzymes help in increasing the activation energy of the reaction

The relation among various mass transfer co-efficients (M.T.C) for ideal gases is given by (where, Kc & Km are M.T.C. for equimolar counter diffusion with concentration & mole fraction respectively as the driving force. and, Kp= M.T.C. for diffusion of a gas through a stagnant inert gas with pressure as driving force.) (A) Kc = Kp = Km (B) Kc = Kp /RT = Km . RT/P (C) Kc = Kp . RT = Km . RT/p (D) None of these

Description : The relation among various mass transfer co-efficients (M.T.C) for ideal gases is given by (where, Kc & Km are M.T.C. for equimolar counter diffusion with concentration & mole fraction respectively as the driving ... (C) Kc = Kp . RT = Km . RT/p (D) None of these

Last Answer : (C) Kc = Kp . RT = Km . RT/p

In a vapor-liquid contacting equipment, the overall gas phase mass transfer co-efficient (M.T.C), KG is related to individual co-efficients (KG and KL ) as (A) KG = 1/KG + m/KL (B) 1/KG = 1/KG + m/KL (C) 1/KG = 1/KL + m/KG (D) KG = 1/KL + m/KG

Description : In a vapor-liquid contacting equipment, the overall gas phase mass transfer co-efficient (M.T.C), KG is related to individual co-efficients (KG and KL ) as (A) KG = 1/KG + m/KL (B) 1/KG = 1/KG + m/KL (C) 1/KG = 1/KL + m/KG (D) KG = 1/KL + m/KG

Last Answer : (B) 1/KG = 1/KG + m/KL

A first order gaseous phase reaction is catalysed by a non-porous solid. The kinetic rate constant and the external mass transfer co-efficients are k and kg respectively. The effective rate constant (ke ff) is given by (A) ke ff = k + kg (B) ke ff = (k+ kg )/2 (C) ke ff = (kkg ) 1/2 (D) 1/ke ff = 1/k + 1/kg

Description : A first order gaseous phase reaction is catalysed by a non-porous solid. The kinetic rate constant and the external mass transfer co-efficients are k and kg respectively. The effective rate constant (ke ff) is given by (A) ke ff = k + kg ( ... + kg )/2 (C) ke ff = (kkg ) 1/2 (D) 1/ke ff = 1/k + 1/kg

Last Answer : (D) 1/ke ff = 1/k + 1/kg

For condensation of pure vapors, if the heat transfer co-efficients in filmwise and drop-wise condensation are respectively hf and hd , then (A) hf = hd (B) hf > hd (C) hf < hd (D) hf could be greater or smaller than hd

Description :  For condensation of pure vapors, if the heat transfer co-efficients in filmwise and drop-wise condensation are respectively hf and hd , then (A) hf = hd (B) hf > hd (C) hf < hd (D) hf could be greater or smaller than hd

Last Answer : (C) hf < hd

The necessary and sufficient condition for equilibrium between two phases is (A) The concentration of each component should be same in the two phases (B) The temperature of each phase should be same (C) The pressure should be same in the two phases (D) The chemical potential of each component should be same in the two phases

Description : The necessary and sufficient condition for equilibrium between two phases is (A) The concentration of each component should be same in the two phases (B) The temperature of each phase should be same ( ... the two phases (D) The chemical potential of each component should be same in the two phases

Last Answer : (D) The chemical potential of each component should be same in the two phases

Van Laar equation deals with the activity co-efficients in (A) Binary solutions (B) Ternary solutions (C) Azeotropic mixture only (D) None of these

Description : Van Laar equation deals with the activity co-efficients in (A) Binary solutions (B) Ternary solutions (C) Azeotropic mixture only (D) None of these

Last Answer : (A) Binary solutions

Which one of the following statements is not correct? A Since voltage depends on concentrations, using standard conditions makes it easier to compare different electrochemical reactions. B We have to measure the cell potential to obtain the difference in potential energy because the potential of half-reactions cannot be measured directly. C The direction of a redox reaction can only be determined experimentally. D Half-cell potentials for half-reactions are determined by combining the relevant half-cell with a standardised half-cell.

Description : Which one of the following statements is not correct? A Since voltage depends on concentrations, using standard conditions makes it easier to compare different electrochemical reactions. B We have ... half-reactions are determined by combining the relevant half-cell with a standardised half-cell.

Last Answer : C The direction of a redox reaction can only be determined experimentally. 

At equilibrium condition, the chemical potential of a material in different phases in contact with each other is equal. The chemical potential for a real gas (μ) is given by (where, μ = standard chemical potential at unit fugacity (f° = 1 atm.) and the gas behaves ideally.) (A) μ° + RT ln f (B) μ°+ R ln f (C) μ° + T ln f (D) μ° + R/T ln f

Description : At equilibrium condition, the chemical potential of a material in different phases in contact with each other is equal. The chemical potential for a real gas (μ) is given by (where, μ = standard chemical potential at unit fugacity (f° = 1 atm. ... (B) μ°+ R ln f (C) μ° + T ln f (D) μ° + R/T ln f

Last Answer : (A) μ° + RT ln f

In an interphase mass transfer process, the lesser the solubility of a given solute in a liquid, the higher are the chances that the transfer process will be (A) Liquid phase resistance-controlled (B) Gas phase resistance controlled (C) Impossible (D) Driven by a non-linear driving forc

Description : In an interphase mass transfer process, the lesser the solubility of a given solute in a liquid, the higher are the chances that the transfer process will be (A) Liquid phase resistance-controlled (B) Gas phase resistance controlled (C) Impossible (D) Driven by a non-linear driving forc

Last Answer : (B) Gas phase resistance controlled

Pick out the wrong statement. (A) In drying a solid containing moisture above the critical moisture content the number of degrees of freedom is 2 (B) Sherwood number in mass transfer corresponds to Nusselt number in heat transfer and Schmidt number to Prandtl number (C) Forced convection is relatively more effective in increasing the rate of mass transfer, if Schmidt number is larger (D) Hot gases at moderate pressure are usually in the shell side of shell and tube heat exchangers. At higher pressure, however, it is customary to put gas in the tube side

Description : Pick out the wrong statement. (A) In drying a solid containing moisture above the critical moisture content the number of degrees of freedom is 2 (B) Sherwood number in mass transfer corresponds to ... tube heat exchangers. At higher pressure, however, it is customary to put gas in the tube side

Last Answer : (C) Forced convection is relatively more effective in increasing the rate of mass transfer, if Schmidt number is larger

Which of the following is true for Virial equation of state? (A) Virial co-efficients are universal constants (B) Virial co-efficients 'B' represents three body interactions (C) Virial co-efficients are function of temperature only (D) For some gases, Virial equations and ideal gas equations are the same

Description : Which of the following is true for Virial equation of state? (A) Virial co-efficients are universal constants (B) Virial co-efficients 'B' represents three body interactions (C) Virial co-efficients ... of temperature only (D) For some gases, Virial equations and ideal gas equations are the same

Last Answer : (C) Virial co-efficients are function of temperature only

If a system involves two phases, it is in ______ equilibrium when the mass of each phase reaches an equilibrium level and stays there.  A. Chemical  B. Thermal  C. Mechanical  D. Phase

Description : If a system involves two phases, it is in ______ equilibrium when the mass of each phase reaches an equilibrium level and stays there.  A. Chemical  B. Thermal  C. Mechanical  D. Phase

Last Answer : Phase

When liquid and vapour phase of multi-component system are in equilibrium (at a given temperature and pressure), then chemical potential of each component is (A) Same in both the phases (B) Zero in both the phases (C) More in vapour phase (D) More in liquid phase

Description : When liquid and vapour phase of multi-component system are in equilibrium (at a given temperature and pressure), then chemical potential of each component is (A) Same in both the phases (B) Zero in both the phases (C) More in vapour phase (D) More in liquid phase

Last Answer : (A) Same in both the phases

When liquid and vapour phases of one component system are in equilibrium (at a given temperature and pressure), the molar free energy is (A) More in vapour phase (B) More in liquid phase (C) Same in both the phases (D) Replaced by chemical potential which is more in vapour phase

Description : When liquid and vapour phases of one component system are in equilibrium (at a given temperature and pressure), the molar free energy is (A) More in vapour phase (B) More in liquid phase (C) Same in both the phases (D) Replaced by chemical potential which is more in vapour phase

Last Answer : (C) Same in both the phases

For multi-component multiple phases to be in equilibrium at the same pressure and temperature, the __________ of each component must be same in all phases. (A) Chemical potential (B) Fugacity (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : For multi-component multiple phases to be in equilibrium at the same pressure and temperature, the __________ of each component must be same in all phases. (A) Chemical potential (B) Fugacity (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

The eukaryotic cell cycle consists of discrete phases. One of these is named the M or mitosis phase during which the cell divides. Following the M phase is a period known as interphase that is made up of three distinct phases. Name, in order, the three separate phases of interphase.

Description : The eukaryotic cell cycle consists of discrete phases. One of these is named the M or mitosis phase during which the cell divides. Following the M phase is a period known as interphase that is made up of three distinct phases. Name, in order, the three separate phases of interphase.

Last Answer : G1, S and G2

Synapsis and crossing over of chromosomes occurs i which phases of meiosis? a) Interphase b) Prophase c) Meterphase d) Teleophase

Description : Synapsis and crossing over of chromosomes occurs i which phases of meiosis? a) Interphase b) Prophase c) Meterphase d) Teleophase

Last Answer : ANSWER: B -- PROPHASE

Mass transfer rate between two fluid phases does not necessarily depend on the __________ of the two phases. (A) Chemical properties (B) Physical properties (C) Degree of turbulence (D) Interfacial area

Description : Mass transfer rate between two fluid phases does not necessarily depend on the __________ of the two phases. (A) Chemical properties (B) Physical properties (C) Degree of turbulence (D) Interfacial area

Last Answer : (A) Chemical properties

Identify the INCORRECT statement below regarding chemical equilibrium. A All chemical reactions are, in principle, reversible. B Equilibrium is achieved when the forward reaction rate equals the reverse reaction rate. C Equilibrium is achieved when the concentrations of species become constant. D Equilibrium is achieved when the reaction quotient, Q, equals the equilibrium constant. E Equilibrium is achieved when reactant and product concentrations are equal.

Description : Identify the INCORRECT statement below regarding chemical equilibrium. A All chemical reactions are, in principle, reversible. B Equilibrium is achieved when the forward reaction rate equals the ... equilibrium constant. E Equilibrium is achieved when reactant and product concentrations are equal.

Last Answer : E Equilibrium is achieved when reactant and product concentrations are equal.

Pick out the wrong statement (A) Co-current absorbers are usually used, when the gas to be dissolved in the liquid is a pure substance (B) In case of gas absorption, HETP is equal to HTU, when both the operating line & the equilibrium lines are parallel (C) Hatta number is important in case of gas absorption with chemical reaction (D) In actual practice, absorption is an endothermic process, while stripping is an exothermic process

Description : Pick out the wrong statement (A) Co-current absorbers are usually used, when the gas to be dissolved in the liquid is a pure substance (B) In case of gas absorption, HETP is ... reaction (D) In actual practice, absorption is an endothermic process, while stripping is an exothermic process

Last Answer : (D) In actual practice, absorption is an endothermic process, while stripping is an exothermic process

A standard ice point temperature corresponds to the temperature of (a) water at 0°C (b) ice at - 4°C (c) mixture of ice, water and vapour under equilibrium conditions under NTP conditions (d) mixture of ice and water Under equilibrium conditions.

Description : A standard ice point temperature corresponds to the temperature of (a) water at 0°C (b) ice at - 4°C (c) mixture of ice, water and vapour under equilibrium conditions under NTP conditions (d) mixture of ice and water Under equilibrium conditions.

Last Answer : Ans: D

A reasonably general expression for vapour-liquid phase equilibrium at low to moderate pressure is φi yi P = Yi xifi° where, Φ is a vapor fugacity component, Yiis the liquid activity co-efficient and fi° is the fugacity of the pure component i. the Ki value (Yi = Ki xi) is therefore, in general a function of (A) Temperature only (B) Temperature and pressure only (C) Temperature, pressure and liquid composition xi only (D) Temperature, pressure, liquid composition xi and vapour composition yi

Description : A reasonably general expression for vapour-liquid phase equilibrium at low to moderate pressure is φi yi P = Yi xifi° where, Φ is a vapor fugacity component, Yiis the liquid activity co- ... and liquid composition xi only (D) Temperature, pressure, liquid composition xi and vapour composition yi

Last Answer : (C) Temperature, pressure and liquid composition xi only

Which of the following statements is correct for any closed loop system ? (a) All the co-efficients can have zero value (6) All the co-efficients are always non-zero (c) Only one of the static error co-efficients has a finite non-zero value (d) None of the above

Description : Which of the following statements is correct for any closed loop system ? (a) All the co-efficients can have zero value (6) All the co-efficients are always non-zero (c) Only one of the static error co-efficients has a finite non-zero value (d) None of the above

Last Answer : Ans: C

Static error co-efficients are used as a measure of the effectiveness of...

Description : Static error co-efficients are used as a measure of the effectiveness of closed loop systems for specified ________ input signal.

Last Answer : acceleration , velocity, position 

The minimum liquid rate to be used in an absorber corresponds to an operating line (A) Of slope = 1 (B) Of slope = 0.1 (C) Tangential to the equilibrium curve (D) None of these

Description : The minimum liquid rate to be used in an absorber corresponds to an operating line (A) Of slope = 1 (B) Of slope = 0.1 (C) Tangential to the equilibrium curve (D) None of these

Last Answer : (C) Tangential to the equilibrium curve

Pick out the correct statement. (A) A catalyst speeds up the forward reaction but slows shown the reverse reaction (B) Addition of catalyst changes the equilibrium constant (C) Pressure changes do not change the equilibrium concentrations (D) The composition of equilibrium is changed by catalyst

Description : Pick out the correct statement. (A) A catalyst speeds up the forward reaction but slows shown the reverse reaction (B) Addition of catalyst changes the equilibrium constant (C) Pressure changes do not change the equilibrium concentrations (D) The composition of equilibrium is changed by catalyst

Last Answer : (C) Pressure changes do not change the equilibrium concentrations

Cleo Davis sets forth one major condition when her firm's sales managers sit down to reallocate accounts into sales territories: "It is an absolute necessity that the sales potentials of the territories we establish be A)equal." B)measurable." C)consistent." D)the same as before."

Description : Cleo Davis sets forth one major condition when her firm's sales managers sit down to reallocate accounts into sales territories: "It is an absolute necessity that the sales potentials of the territories we establish be A)equal." B)measurable." C)consistent." D)the same as before."

Last Answer : B)measurable."

Variation of equilibrium pressure with temperature for any two phases of a given substances is given by the __________ equation. (A) Gibbs-Duhem (B) Maxwell's (C) Clapeyron (D) None of these

Description : Variation of equilibrium pressure with temperature for any two phases of a given substances is given by the __________ equation. (A) Gibbs-Duhem (B) Maxwell's (C) Clapeyron (D) None of these

Last Answer : (C) Clapeyron

Solid and liquid phases of a substance are in equilibrium at the (A) Critical temperature (B) Melting point (C) Freezing point (D) Both (B) and (C)

Description : Solid and liquid phases of a substance are in equilibrium at the (A) Critical temperature (B) Melting point (C) Freezing point (D) Both (B) and (C)

Last Answer : D) Both (B) and (C)

When an isolated thermodynamic system executes a process, (A) Work is done (B) Heat transfer takes place (C) Mass flow occurs across the boundary of the system (D) No chemical reaction takes place within the system

Description : When an isolated thermodynamic system executes a process, (A) Work is done (B) Heat transfer takes place (C) Mass flow occurs across the boundary of the system (D) No chemical reaction takes place within the system

Last Answer : D) No chemical reaction takes place within the system

The rate of mass transfer is not dependent upon the (A) Degree of dispersion of one fluid in the other (B) Interfacial surface exposed between the phases (C) Both (A) & (B) (D) None of these

Description : The rate of mass transfer is not dependent upon the (A) Degree of dispersion of one fluid in the other (B) Interfacial surface exposed between the phases (C) Both (A) & (B) (D) None of these

Last Answer : (D) None of these

For the reaction `a+brArrc+d`, initially concentrations of a and b are equal and at equilibrium the concentration of a . What will be the equilibrium

Description : For the reaction `a+brArrc+d`, initially concentrations of a and b are equal and at equilibrium the concentration of a . What will be the equilibrium

Last Answer : For the reaction `a+brArrc+d`, initially concentrations of a and b are equal and at equilibrium the concentration of a ... ? A. 2 B. 9 C. 4 D. 3

In the reaction `N_(2(g))+O_(2(g))rArr2NO_((g))`at equilibrium the concentrations of `N_(2),O_(2)andNO` are 0.25 , 0.05 and 1 M respectively . Calcula

Description : In the reaction `N_(2(g))+O_(2(g))rArr2NO_((g))`at equilibrium the concentrations of `N_(2),O_(2)andNO` are 0.25 , 0.05 and 1 M respectively . Calcula

Last Answer : In the reaction `N_(2(g))+O_(2(g))rArr2NO_((g))`at equilibrium the concentrations of `N_(2),O_(2)andNO` are 0.25 ... .75 M , 0.55 M D. 0.75 M , 0.45 M

The free energy change, AG (A) Is directly proportional to the standard free energy change, AG (B) Is equal to zero at equilibrium (C) Can only be calculated when the reactants and products are present at 1mol/1 concentrations (D) Is equal to –RT in keq

Description : The free energy change, AG (A) Is directly proportional to the standard free energy change, AG (B) Is equal to zero at equilibrium (C) Can only be calculated when the reactants and products are present at 1mol/1 concentrations (D) Is equal to –RT in keq

Last Answer : B

If a system after undergoing a series of processes, returns to the initial state then  (a) process is thermodynamically in equilibrium  (b) process is executed in closed system cycle  (c) its entropy will change due to irreversibility  (d) sum of heat and work transfer will be zero  (e) no work will be done by the system.

Description : If a system after undergoing a series of processes, returns to the initial state then  (a) process is thermodynamically in equilibrium  (b) process is executed in closed system cycle  (c) its entropy will ... sum of heat and work transfer will be zero  (e) no work will be done by the system.

Last Answer : Answer : d

Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger calculations (Δt) weighted is used in place of Δt, when it involves more than one sequence of heating or cooling i.e., desuperheating & condensation or condensation & sub-cooling (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted (D) In case of short tube vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Description : Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger ... vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Last Answer : (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted

Answer: a, b, c, d Free oxygen radicals are chemical species that are intermediates in the normal process of cellular respiration. Oxidants that are free radicals have been implicated as initiators of reactions which lead to a variety of cellular injuries. Oxidants are derived from several sources, notably phagocytes. Among the effects of oxygen free radicals are membrane lipid peroxidation, DNA strand breaks, cytoskeletal disassembly and inhibition of glucose metabolism leading to decreased cellular ATP concentrations. (Figure 6-16) 187 Which of the following acute-phase protein levels are increased in human plasma following acute inflammation? a. C-reactive protein b. Serum amyloid c. a -Proteinase inhibitor d. Fibrinogen e. Albumin

Description : Answer: a, b, c, d Free oxygen radicals are chemical species that are intermediates in the normal process of cellular respiration. Oxidants that are free radicals have been implicated as initiators of ... a. C-reactive protein b. Serum amyloid c. a -Proteinase inhibitor d. Fibrinogen e. Albumin

Last Answer : Answer: a, b, c, d The acute-phase response is a series of homeostatic responses of the organism to tissue injury in infection and inflammation. After an inflammatory stimulus occurs, a number ... 30% to 50% of the level before injury. The reason for the decrease in production is poorly understood

Log mean temperature difference (LMTD) cannot be used, if (A) Heat transfer co-efficient over the entire heat exchanger is not constant (B) There exists an unsteady state (C) The heat capacity is not constant and there is a phase change (D) None of these

Description : Log mean temperature difference (LMTD) cannot be used, if (A) Heat transfer co-efficient over the entire heat exchanger is not constant (B) There exists an unsteady state (C) The heat capacity is not constant and there is a phase change (D) None of these

Last Answer : (D) None of these

The left face of a one dimensional slab of thickness 0.2 m is maintained at 80°C and the right face is exposed to air at 30°C. The thermal conductivity of the slab is 1.2 W/m.K and the heat transfer co-efficient from the right face is 10 W/m2 .K. At steady state, the temperature of the right face in °C is (A) 77.2 (B) 71.2 (C) 63.8 (D) 48.7

Description : The left face of a one dimensional slab of thickness 0.2 m is maintained at 80°C and the right face is exposed to air at 30°C. The thermal conductivity of the slab is 1.2 W/m.K and the heat transfer co-efficient from the ... temperature of the right face in °C is (A) 77.2 (B) 71.2 (C) 63.8 (D) 48.7

Last Answer : (D) 48.7

Subsidiaires located in countries which are less crucial for success while holding valuable resources and capabilities are...? A. Contributors B. Star Potentials C. Black Holes D. Implementers

Description : Subsidiaires located in countries which are less crucial for success while holding valuable resources and capabilities are...? A. Contributors B. Star Potentials C. Black Holes D. Implementers

Last Answer : Contributors

The reaction A (l) → R(g) is allowed to reach equilibrium conditions in an autoclave. At equilibrium, there are two phases, one a pure liquid phase of A and the other a vapor phase of A, R and S. Initially A alone is present. The numbers of degrees of freedom are: (A) 1 (B) 2 (C) 3 (D) 0

Description : The reaction A (l) → R(g) is allowed to reach equilibrium conditions in an autoclave. At equilibrium, there are two phases, one a pure liquid phase of A and the other a vapor phase of A, R and S. Initially A alone is present. The numbers of degrees of freedom are: (A) 1 (B) 2 (C) 3 (D) 0

Last Answer : (B) 2