Coordinate grids?

Coordinate grids?
by

1 Answer

Answer :

zdjhcxjhvjcczxnbcxzjkhjhjkcxzkhjzxczcxmcmzcxbbkjxx nkZSCXHKzcxmbxcnjzxcjhkADSkuzxc
by
selected by

Related questions

Coordinate grids?

Description : Coordinate grids?

Last Answer : zdjhcxjhvjcczxnbcxzjkhjhjkcxzkhjzxczcxmcmzcxbbkjxx nkZSCXHKzcxmbxcnjzxcjhkADSkuzxc

How do we Shade some of the grids to show that 2 ones is the same as 20 tenths?

Description : How do we Shade some of the grids to show that 2 ones is the same as 20 tenths?

Last Answer : Need answer

A natural draft cooling tower is filled with wooden grids, which covers about __________ percent of the tower height. (A) 10-15 (B) 30-40 (C) 70-80 (D) 90-100

Description : A natural draft cooling tower is filled with wooden grids, which covers about __________ percent of the tower height. (A) 10-15 (B) 30-40 (C) 70-80 (D) 90-100

Last Answer : (A) 10-15

What is the effect upon an electron that enters the buncher gap when the potential across the grids is at 0 volts?

Description : What is the effect upon an electron that enters the buncher gap when the potential across the grids is at 0 volts?

Last Answer : There is no effect

What condition must exist on both the limiter and quadrature grids for current to flow in a gated-beam detector?

Description : What condition must exist on both the limiter and quadrature grids for current to flow in a gated-beam detector?

Last Answer : Both grids must be positively biased

Which ofthe following materials is used in the manufacture of resistance grids to be used in the starters of large motors ? (a) Copper (b) Aluminium (c) Steel (d) Cast-iron

Description : Which ofthe following materials is used in the manufacture of resistance grids to be used in the starters of large motors ? (a) Copper (b) Aluminium (c) Steel (d) Cast-iron

Last Answer : (d) Cast-iron

_______ electric power is the most common method used by electrical grids to transfer power.

Description : _______ electric power is the most common method used by electrical grids to transfer power.  (A) One-phase (B) Two-phase (C) Three-phase (D) None of the above

Last Answer : Three-phase electric power is the most common method used by electrical grids to transfer power. 

If you volunteered to grab lunch for yourself and 4 coworkers at a fast food restaurant, how would you coordinate it?

Description : If you volunteered to grab lunch for yourself and 4 coworkers at a fast food restaurant, how would you coordinate it?

Last Answer : I would announce I was going out for ONE, specific, lunch item, like tacos, or burritos and if anyone wanted something to toss some cash my way. Then I would get the same items for everyone. 4 burritos, 4 tacos, done. I am not a masochist. LOL

Smallest circle that intersects N number of points on the coordinate plane?

Description : Smallest circle that intersects N number of points on the coordinate plane?

Last Answer : I don’t see how the upper bound is radius of 20. How does that circle have “20 intersection points?”

How do you create an equation or mathematical model from a coordinate table?

Description : How do you create an equation or mathematical model from a coordinate table?

Last Answer : When ever it comes to math I always divide by two and take an aspirin. Good luck.

Is there a home-based calendering system that my fiancee and I can use to coordinate our schedules?

Description : Is there a home-based calendering system that my fiancee and I can use to coordinate our schedules?

Last Answer : You should try out an online service such as Google Calendars (http://calendar.google.com/). Your fiancee and yourself could share calendars with one another, allowing you to coordinate schedule and whatnot.

From the following which type of work envelope is made in Cartesian coordinate robot. a.Square work envelope b.Spherical work envelope c.Cylindrical work envelope d.Rectangular work envelope

Description : From the following which type of work envelope is made in Cartesian coordinate robot. a.Square work envelope b.Spherical work envelope c.Cylindrical work envelope d.Rectangular work envelope

Last Answer : d.Rectangular work envelope

Which type of motion is possible in polar coordinate robots? a.2 linear and 1 rotational motion b.3 linear motion c.3 rotational motion d.2 rotational and 1 linear motion

Description : Which type of motion is possible in polar coordinate robots? a.2 linear and 1 rotational motion b.3 linear motion c.3 rotational motion d.2 rotational and 1 linear motion

Last Answer : d.2 rotational and 1 linear motion

Which type of motion is possible in cylindrical coordinate robots? a.3 rotational motion b.3 linear and 1 rotational motion c.2 linear and 1 rotational motion d.3 linear motion

Description : Which type of motion is possible in cylindrical coordinate robots? a.3 rotational motion b.3 linear and 1 rotational motion c.2 linear and 1 rotational motion d.3 linear motion

Last Answer : c.2 linear and 1 rotational motion

Which type of motion is possible in Cartesian coordinate robots? a.3 linear motion b.2 linear and 1 rotational motion c.3 rotational motion d.1 linear and 1 rotational motion

Description : Which type of motion is possible in Cartesian coordinate robots? a.3 linear motion b.2 linear and 1 rotational motion c.3 rotational motion d.1 linear and 1 rotational motion

Last Answer : a.3 linear motion

……… is the origin of the coordinate system which is defined by manufacturer they cannotbe changed a.Blocking Point b.machine Zero Point c.Start Point d.Program Zero point

Description : ……… is the origin of the coordinate system which is defined by manufacturer they cannotbe changed a.Blocking Point b.machine Zero Point c.Start Point d.Program Zero point

Last Answer : b.machine Zero Point

Match the following: NC code DefinitionP. M05 1. Absolute coordinate system Q. G01 2. Dwell R. G04 3. Spindle stop S. G09 4. Linear interpolation a.P-2, Q-3, R-4, S-1 b.P-3, Q-4, R-1, S-2 c.P-3, Q-4, R-2, S-1 d.P-4, Q-3, R-2, S-1

Description : Match the following: NC code DefinitionP. M05 1. Absolute coordinate system Q. G01 2. Dwell R. G04 3. Spindle stop S. G09 4. Linear interpolation a.P-2, Q-3, R-4, S-1 b.P-3, Q-4, R-1, S-2 c.P-3, Q-4, R-2, S-1 d.P-4, Q-3, R-2, S-1

Last Answer : c.P-3, Q-4, R-2, S-1

The points in the entire structure are defined using the coordinates system is known as a.local coordinates system b.natural coordinates system c.global coordinate system d.none of the above

Description : The points in the entire structure are defined using the coordinates system is known as a.local coordinates system b.natural coordinates system c.global coordinate system d.none of the above

Last Answer : c.global coordinate system

To find the nodal displacements in all parts of the element, are used. a.shape function b.node function c.element function d.coordinate function

Description : To find the nodal displacements in all parts of the element, are used. a.shape function b.node function c.element function d.coordinate function

Last Answer : a.shape function

Coordinate of â–¡ABCD is WCS are: lowermost corner A(2,2) & diagonal corner are C(8,6). W.r.t MCS. The coordinates of origin of WCS system are (5,4). If the axes of WCS are at 600 in CCW w.r.t. the axes of MCS. Find new vertices of point A in MCS. a.(4.268, 6.732) b.(5.268, 6.732) c.(4.268, 4.732) d.(6.268, 4.732)

Description : Coordinate of â- ABCD is WCS are: lowermost corner A(2,2) & diagonal corner are C(8,6). W.r.t MCS. The coordinates of origin of WCS system are (5,4). If the axes of WCS are at 600 in CCW w.r.t. the axes of MCS. Find new ... in MCS. a.(4.268, 6.732) b.(5.268, 6.732) c.(4.268, 4.732) d.(6.268, 4.732)

Last Answer : a.(4.268, 6.732)

Polygons are translated by adding to the coordinate positionof each vertex and the current attribute setting. a.Straight line path b.Translation vector c.Differences d.Only b

Description : Polygons are translated by adding to the coordinate positionof each vertex and the current attribute setting. a.Straight line path b.Translation vector c.Differences d.Only b

Last Answer : d.Only b

The general homogeneous coordinate representation can also be written as a.(h.x, h.y, h.z) b.(h.x, h.y, h) c.(x, y, h.z) d.(x,y,z)

Description : The general homogeneous coordinate representation can also be written as a.(h.x, h.y, h.z) b.(h.x, h.y, h) c.(x, y, h.z) d.(x,y,z)

Last Answer : b.(h.x, h.y, h)

For 2D transformation the value of third coordinate i.e. w (or h) =? a.1 b.0 c.-1 d.Any value

Description : For 2D transformation the value of third coordinate i.e. w (or h) =? a.1 b.0 c.-1 d.Any value

Last Answer : a.1

The matrix representation for translation in homogeneous coordinates is a.User Coordinate System b.World Coordinate System c.Screen Coordinate System d.None of the above

Description : The matrix representation for translation in homogeneous coordinates is a.User Coordinate System b.World Coordinate System c.Screen Coordinate System d.None of the above

Last Answer : b.World Coordinate System

In which type of projection, actual dimensions and angles of objects and therefore shapescannot be preserved? a.User Coordinate System b.World Coordinate System c.Screen Coordinate System d.None of the above

Description : In which type of projection, actual dimensions and angles of objects and therefore shapescannot be preserved? a.User Coordinate System b.World Coordinate System c.Screen Coordinate System d.None of the above

Last Answer : b.World Coordinate System

When every entity of a geometric model remains parallel to its initial position, thetransformation is called as a.User Coordinate System b.World Coordinate System c.Screen Coordinate System d.None of the above

Description : When every entity of a geometric model remains parallel to its initial position, thetransformation is called as a.User Coordinate System b.World Coordinate System c.Screen Coordinate System d.None of the above

Last Answer : b.World Coordinate System

Which of the following is the default coordinate system? a.User Coordinate System b.World Coordinate System c.Screen Coordinate System d.None of the above

Description : Which of the following is the default coordinate system? a.User Coordinate System b.World Coordinate System c.Screen Coordinate System d.None of the above

Last Answer : b.World Coordinate System

Which coordinate system is a device-dependent coordinate system? a.World Coordinate System b.Model Coordinate System c.User Coordinate System d.Screen Coordinate System

Description : Which coordinate system is a device-dependent coordinate system? a.World Coordinate System b.Model Coordinate System c.User Coordinate System d.Screen Coordinate System

Last Answer : d.Screen Coordinate System

The x coordinate of the centroid of the area enclosed by the parabolas y = x2 and x = y2 will be a.107 dynes b.0.44 c.0.43 d.0.45 e.0.46

Description : The x coordinate of the centroid of the area enclosed by the parabolas y = x2 and x = y2 will be a.107 dynes b.0.44 c.0.43 d.0.45 e.0.46

Last Answer : d. 0.45

The y-coordinate of the centroid of the area bounded by the x-axis, the line x = 3 and the parabola y = x2 will be a.2.7 b.2.55 c.107 dynes d.2.6 e.2.65

Description : The y-coordinate of the centroid of the area bounded by the x-axis, the line x = 3 and the parabola y = x2 will be a.2.7 b.2.55 c.107 dynes d.2.6 e.2.65

Last Answer : a. 2.7

The point at which the two coordinate axes meet is called the -Maths 9th

Description : The point at which the two coordinate axes meet is called the -Maths 9th

Last Answer : (c) The point at which the two coordinate axes meet is called the origin.

If y-coordinate of a point is zero, then this point always lies -Maths 9th

Description : If y-coordinate of a point is zero, then this point always lies -Maths 9th

Last Answer : (c) If y-coordinate of a point is zero, then this point always lies on X-axis. Because perpendicular distance of the point from X-axis measured along Y-axis is zero.

The point at which the two coordinate axes meet is called the -Maths 9th

Description : The point at which the two coordinate axes meet is called the -Maths 9th

Last Answer : (c) The point at which the two coordinate axes meet is called the origin.

If y-coordinate of a point is zero, then this point always lies -Maths 9th

Description : If y-coordinate of a point is zero, then this point always lies -Maths 9th

Last Answer : (c) If y-coordinate of a point is zero, then this point always lies on X-axis. Because perpendicular distance of the point from X-axis measured along Y-axis is zero.

Notes of coordinate geometry -Maths 9th

Description : Notes of coordinate geometry -Maths 9th

Last Answer : NEED ANSWER

Notes of coordinate geometry -Maths 9th

Description : Notes of coordinate geometry -Maths 9th

Last Answer : This answer was deleted by our moderators...

Find the coordinate where the linear equation 3x -4y = 11 meets at x-axis. -Maths 9th

Description : Find the coordinate where the linear equation 3x -4y = 11 meets at x-axis. -Maths 9th

Last Answer : hope it helps

Find the coordinate where the linear equation 4x - 23 y = 7 meets at y-axis. -Maths 9th

Description : Find the coordinate where the linear equation 4x - 23 y = 7 meets at y-axis. -Maths 9th

Last Answer : 4x-2=-7*3y 4x+21y=2 The equation meets y axis when x=0 4.0+21y=2 y=21/2 Hence , the equation meets y-axis at (0,21/2)

If y-coordinate of a point is zero, then where will this point lie in the coordinate plane? On the x-axis. -Maths 9th

Description : If y-coordinate of a point is zero, then where will this point lie in the coordinate plane? On the x-axis. -Maths 9th

Last Answer : Solution :- On the x-axis.

Where does the point (–2, 4) lie in the coordinate plane? -Maths 9th

Description : Where does the point (–2, 4) lie in the coordinate plane? -Maths 9th

Last Answer : Solution :- II quadrant

Coordinate Geometry Class 9th Formula -Maths 9th

Description : Coordinate Geometry Class 9th Formula -Maths 9th

Last Answer : Here, the traingle ABC is isosceles So,Angle A willbe 90°.And AB=BC therefore their angles will be equal So..90+x+x=180° 2x=90° X=45° Then angle B and angle C = 45°

NCERT Solutions for class 9 Maths Chapter 3 Coordinate Geometry Exercise 3.2 -Maths 9th

Description : NCERT Solutions for class 9 Maths Chapter 3 Coordinate Geometry Exercise 3.2 -Maths 9th

Last Answer : For x + 1 = 0, we have x = -1. ∴ The zero of x + 1 is -1. (i) p(x) = x3 + x2 + x + 1 ∴ p(-1) = (-1)3 + (-1)2 + (-1) + 1 = -1 + 1 - 1 + 1 = 0 i.e. when p(x) is divided by (x + 1), then the remainder is zero. ∴ ... ] = (y - 1)[2y(y + 1) + 1(y + 1)] = (y - 1)[(y + 1)(2y + 1)] = (y - 1)(y + 1)(2y + 1)

NCERT Solutions for class 9 Maths Chapter 3 Coordinate Geometry Exercise 3.1 -Maths 9th

Description : NCERT Solutions for class 9 Maths Chapter 3 Coordinate Geometry Exercise 3.1 -Maths 9th

Last Answer : 1. Find the value of the polynomial 5x - 4x2 + 3 at (i) x = 0 (ii) x = -1 (iii) x = 2 (i) ∵ p(x) = 5x - 4x2 + 3 = 5(x) - 4(x)2 + 3 ∴ p(0) = 5(0) - 4(0) + 3 = 0 - 0 + 3 = 3 Thus, the value of 5x - 4x2 ... p(x) = cx + d ∴ p(x) = 0 ⇒ cx + d = 0 or c x = -d or x = - dc Thus, a zero of cx + d is - dc.

MCQ Questions for Class 9 Maths Chapter 3 Coordinate Geometry with answers -Maths 9th

Description : MCQ Questions for Class 9 Maths Chapter 3 Coordinate Geometry with answers -Maths 9th

Last Answer : Below you will find MCQ Questions of Chapter 3 Coordinate Geometry Class 9 Maths Free PDF Download that will help you in gaining good marks in the examinations and also cracking competitive exams ... Coordinate Geometry MCQ Questions will help you in practising more and more questions in less time.

The position of a boy on the coordinate plane is given by the point (4,6) . What is the perpendicular distance from the x-axis and the y-axis ? -Maths 9th

Description : The position of a boy on the coordinate plane is given by the point (4,6) . What is the perpendicular distance from the x-axis and the y-axis ? -Maths 9th

Last Answer : answer:

Cbqs (case base study ) of chapter 3 Coordinate Geometry of maths class 9th -Maths 9th

Description : Cbqs (case base study ) of chapter 3 Coordinate Geometry of maths class 9th -Maths 9th

Last Answer : answer:

if ABCD is dilated by a factor of 1/2, the coordinate of B’ would be?

Description : if ABCD is dilated by a factor of 1/2, the coordinate of B’ would be?

Last Answer : 0.5

what- A map is drawn on a coordinate grid, as shown. The line represents an incoming flight path. A plane is about to leave on a perpendicular flight path that runs through the point (0, 4).Which line represents the outgoing flight path?

Description : what- A map is drawn on a coordinate grid, as shown. The line represents an incoming flight path. A plane is about to leave on a perpendicular flight path that runs through the point (0, 4).Which line represents the outgoing flight path?

Last Answer : y= -5x +4

Who is the father of coordinate geometry and analysis geometry ?

Description : Who is the father of coordinate geometry and analysis geometry ?

Last Answer : Ron Descartes (French), the father of geometry and analysis geometry.

The ellipse `x^2+""4y^2=""4` is inscribed in a rectangle aligned with the coordinate axes, which in turn is inscribed in another ellipse that passes t

Description : The ellipse `x^2+""4y^2=""4` is inscribed in a rectangle aligned with the coordinate axes, which in turn is inscribed in another ellipse that passes t

Last Answer : The ellipse `x^2+""4y^2=""4` is inscribed in a rectangle aligned with the coordinate axes, which in turn is ... 4x^2+48y^2=48` D. `4x^2+64y^2=48`