How can we find the volume of small pebble with the help of measurin cylinder?

How can we find the volume of small pebble with the help of measurin cylinder?
by

1 Answer

Answer :

First put water in measuring cylinder and note the volume of water. Next, put the pebble in it.
by
selected by

Related questions

Can you use a beach pebble as a pumice stone?

Description : Can you use a beach pebble as a pumice stone?

Last Answer : It’s probably safe, but pebbles (at least when I think of it) are normally small and smooth; pumice is a little bit rough, and that’s what makes it work.

7. If you had a natural pebble-like the ones shown on page 13 in the textbook, what would you use it for? -History

Description : 7. If you had a natural pebble-like the ones shown on page 13 in the textbook, what would you use it for? -History

Last Answer : I would have used some of these stone tools to cut meat and bone, scrape bark (from trees) and hides (animal skins), chop fruit, and roots. Some may have been attached to handles of bone or ... make spears and arrows for hunting. Other stone tools were used to chop wood, which was used as firewood,

How do pebble stones form?

Description : Do they just make them round?

Last Answer : Pebbles have been forming for decades. It is sanded by other stones in the water until a pebble is formed.

How is a stone pebble?

Description : I mean those round stones. Does it arise on its own? Or is it created by man?

Last Answer : "It arises on its own in nature" - a stone (pebble) simply rotates in a watercourse under the influence of a water stream and rubs against the surrounding stones (pebbles) until (and so thoroughly) it becomes a pebble. : o "man" - do you think that a person is sitting by a stream and playing ??? : D

Are the waves caused by a pebble in water the same frequency?

Description : Are the waves caused by a pebble in water the same frequency?

Last Answer : Feel Free to Answer

Are there coasters or anything on the trundle bed with the Pebble Beach Bed and Trundle, or does it just slide on the floor?

Description : Are there coasters or anything on the trundle bed with the Pebble Beach Bed and Trundle, or does it just slide on the floor?

Last Answer : The Pebble Beach Bed and Trundle uses a coaster to slide the trundle under the bed.

Does pebble have only personal computers or do they also offer top range computer servers as used in large establishments under computer deal?

Description : Does pebble have only personal computers or do they also offer top range computer servers as used in large establishments under computer deal?

Last Answer : They do offer servers. A good one might be Acer Computer AH340-UA230N Aspire

__________ mills are termed as disintegrators.(A) Cage (B) Compartment (C) Pebble (D) All tumbling

Description : __________ mills are termed as disintegrators .(A) Cage (B) Compartment (C) Pebble (D) All tumbling

Last Answer : (A) Cage

__________ mills fall in the category of tumbling mills, (A) Ball and pebble (B) Rod and tube (C) Compartment (D) All (A), (B) & (C

Description : __________ mills fall in the category of tumbling mills, (A) Ball and pebble (B) Rod and tube (C) Compartment (D) All (A), (B) & (C

Last Answer : (D) All (A), (B) & (C

A pebble mill (A) Is a ball mill (B) Employs flints or ceramic pebbles as the grinding medium (C) Is a tube mill lined with ceramic or other non-metallic liner (D) Both (B) and (C)

Description : A pebble mill (A) Is a ball mill (B) Employs flints or ceramic pebbles as the grinding medium (C) Is a tube mill lined with ceramic or other non-metallic liner (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

3. __________ mill is normally used for grinding of talc. (A) Tube (B) Compartment (C) Ring-roll (D) Pebble

Description : 3. __________ mill is normally used for grinding of talc. (A) Tube (B) Compartment (C) Ring-roll (D) Pebble

Last Answer : (A) Tube

A __________ mill is a revolving mill divided into two or more sections by perforated partitions in which preliminary grinding takes place at one end and the finishing grinding at the discharge end. (A) Compartment (B) Tube (C) Rod (D) Pebble

Description : A __________ mill is a revolving mill divided into two or more sections by perforated partitions in which preliminary grinding takes place at one end and the finishing grinding at the discharge end. (A) Compartment (B) Tube (C) Rod (D) Pebble

Last Answer : (A) Compartmen

__________ mill is not used for grinding wheat into flour and for milling of cereals & other vegetable products. (A) Buhrstone (B) Roller (C) Attrition (D) Pebble

Description : __________ mill is not used for grinding wheat into flour and for milling of cereals & other vegetable products. (A) Buhrstone (B) Roller (C) Attrition (D) Pebble

Last Answer : (D) Pebble

Pebble mills are tumbling mills widely used for grinding in the manufacture of paints & pigments and cosmetic industries, where iron contamination in the product is highly objectionable. Pebbles used in pebble mill are made of (A) Bronze (B) Stainless steel (C) Flint or porcelain (D) Concrete

Description : Pebble mills are tumbling mills widely used for grinding in the manufacture of paints & pigments and cosmetic industries, where iron contamination in the product is highly objectionable. Pebbles used in pebble mill are made of (A) Bronze (B) Stainless steel (C) Flint or porcelain (D) Concrete

Last Answer : (C) Flint or porcelain

Which of the following is not a revolving/tumbling mill used for size reduction? (A) Compartment mill (B) Pebble mill (C) Cage mill (D) Rod mill

Description : Which of the following is not a revolving/tumbling mill used for size reduction? (A) Compartment mill (B) Pebble mill (C) Cage mill (D) Rod mill

Last Answer : (C) Cage mill

__________ mill is not a revolving mill. (A) Pebble (B) Compartment (C) Cage (D) Tube

Description : __________ mill is not a revolving mill. (A) Pebble (B) Compartment (C) Cage (D) Tube

Last Answer : (C) Cage

Which of the following grinding mills has the horizontally arranged rods as the grinding elements thereby delivering more uniform granular products with minimum fines? (A) Compartment mill (B) Rod mill (C) Pebble mill (D) Tube mill

Description : Which of the following grinding mills has the horizontally arranged rods as the grinding elements thereby delivering more uniform granular products with minimum fines? (A) Compartment mill (B) Rod mill (C) Pebble mill (D) Tube mill

Last Answer : (B) Rod mill

7 Natural Stone Pebble Projects For Every Home

Description : 7 Natural Stone Pebble Projects For Every Home

Last Answer : 7 Natural Stone Pebble Projects For Every Home By: William Siebler Natural stone pebbles are becoming extremely popular in homes because of their wide range of colors and uses. Here are a few ideas for use ... in the planting holes are spread in a thick layer. Larger flat rocks are used as edging.

hen displacement volume is divided by piston displacement, what will we obtained (a) number of cylinders (b) number of power stroke per minute for all cylinders (c) number of revolution of the crankshaft (engine) (d) number of revolution of crankshaft × number of cylinder

Description : hen displacement volume is divided by piston displacement, what will we obtained (a) number of cylinders (b) number of power stroke per minute for all cylinders (c) number of revolution of the crankshaft (engine) (d) number of revolution of crankshaft × number of cylinder

Last Answer : (b) number of power stroke per minute for all cylinders

the curved surface area of a cylinder is 154 cm. the total surface area of the cylinder is three times its curved surface area. find the volume of the cylinder. -Maths 9th

Description : the curved surface area of a cylinder is 154 cm. the total surface area of the cylinder is three times its curved surface area. find the volume of the cylinder. -Maths 9th

Last Answer : T.S.A = 3*154 = 462 cm² C.S.A = 154 cm² C.S.A = 2πrh T.S.A = 2πr(r+h) Now, In T.S.A = 2πrr + 2πrh 462 = 2πrr + 2πrh 462 = 2*22/7*r*r + 154 462 - 154 = 2*22/7*r*r 308*7/2*22 = r*r 49 = r*r R = 7 cm ... 7*h 154/44 = h 7/2 =h H = 3.5 cm or 7/2 cm Now volume = πrrh = 22/7 * 7* 7 *7/2 = 11*49 = 539 cm³

If the ratio of curved surface area and total surface area of a cylinder is 1 : 3, then find the volume of cylinder when the height is 2 cm. -Maths 9th

Description : If the ratio of curved surface area and total surface area of a cylinder is 1 : 3, then find the volume of cylinder when the height is 2 cm. -Maths 9th

Last Answer : Let the radius and height of the cylinder be r and h, respectively . Given that, Curved surface area / Total surface area = 1/3 ⇒ 2πrh / 2πr(h + r) = 1/3 ⇒ 3h = h + r ⇒ r = 2h = 4cm ∴ volume of cylinder πr2h = π × (4)2 × 2 = 32π cm3

A spherical ball is divided into two equal halves. If the curved surface area of each half is 56.57 cm?, find the volume of the spherical ball.11531/cylinder-radius-halved-and-height-doubled-then-find-volume-with-respect-original-volume -Maths 9th

Description : A spherical ball is divided into two equal halves. If the curved surface area of each half is 56.57 cm?, find the volume of the spherical ball.11531/cylinder-radius-halved-and-height-doubled-then-find-volume-with-respect-original-volume -Maths 9th

Last Answer : since curved surface of half of the spherical ball = 56.57 cm2 ∴ 2πr2 = 56.57 ⇒ r2 = 56.57 / 2 × 3.14 = 9 ⇒ r = 3 cm Now, volume of spherical ball = 4 / 3 πr3 = 4 / 3 × 3.14 × 3 × 3 × 3 = 113.04 cm3

If the ratio of curved surface area and total surface area of a cylinder is 1 : 3, then find the volume of cylinder when the height is 2 cm. -Maths 9th

Description : If the ratio of curved surface area and total surface area of a cylinder is 1 : 3, then find the volume of cylinder when the height is 2 cm. -Maths 9th

Last Answer : Let the radius and height of the cylinder be r and h, respectively . Given that, Curved surface area / Total surface area = 1/3 ⇒ 2πrh / 2πr(h + r) = 1/3 ⇒ 3h = h + r ⇒ r = 2h = 4cm ∴ volume of cylinder πr2h = π × (4)2 × 2 = 32π cm3

A spherical ball is divided into two equal halves. If the curved surface area of each half is 56.57 cm?, find the volume of the spherical ball.11531/cylinder-radius-halved-and-height-doubled-then-find-volume-with-respect-original-volume -Maths 9th

Description : A spherical ball is divided into two equal halves. If the curved surface area of each half is 56.57 cm?, find the volume of the spherical ball.11531/cylinder-radius-halved-and-height-doubled-then-find-volume-with-respect-original-volume -Maths 9th

Last Answer : since curved surface of half of the spherical ball = 56.57 cm2 ∴ 2πr2 = 56.57 ⇒ r2 = 56.57 / 2 × 3.14 = 9 ⇒ r = 3 cm Now, volume of spherical ball = 4 / 3 πr3 = 4 / 3 × 3.14 × 3 × 3 × 3 = 113.04 cm3

Define :Volume and surface area of a hollow cylinder. -Maths 9th

Description : Define :Volume and surface area of a hollow cylinder. -Maths 9th

Last Answer : answer:

A cylinder is filled to 4/5 th of its volume. It is, then tilted so that the level of water coincides with one edge of its bottom and top edge -Maths 9th

Description : A cylinder is filled to 4/5 th of its volume. It is, then tilted so that the level of water coincides with one edge of its bottom and top edge -Maths 9th

Last Answer : answer:

A right circular solid cone of maximum possible volume is cut off from a solid metallic right circular cylinder of volume V. -Maths 9th

Description : A right circular solid cone of maximum possible volume is cut off from a solid metallic right circular cylinder of volume V. -Maths 9th

Last Answer : answer:

The magnitude of the volume of a closed right circular cylinder of unit height divided by the magnitude of the total surface area of the -Maths 9th

Description : The magnitude of the volume of a closed right circular cylinder of unit height divided by the magnitude of the total surface area of the -Maths 9th

Last Answer : answer:

Find the volume ofFind the volume of the cylinder. the cylinder?

Description : Find the volume ofFind the volume of the cylinder. the cylinder?

Last Answer : v=l*b

Find the height of a cylinder with the volume of 452.16 and a radius of 4 in?

Description : Find the height of a cylinder with the volume of 452.16 and a radius of 4 in?

Last Answer : V=πr^2hh = V/(πr^2)h = 452.16/(π*4^2)h = 8.99 in

how can you measure the volume of a piece of sugar by gaduated cylinder?

Description : how can you measure the volume of a piece of sugar by gaduated cylinder?

Last Answer : I don't now

Cylinder Volume Get out To do Formula What ?

Last Answer : Cylinder Volume Get out To do Source: ?r ^ 2h

Frame the formula for the volume (v) of a cylinder given by the product of `pi`, square of radius (r) and height (h).

Description : Frame the formula for the volume (v) of a cylinder given by the product of `pi`, square of radius (r) and height (h).

Last Answer : Frame the formula for the volume (v) of a cylinder given by the product of `pi`, square of radius (r) and height (h).

How do you find the radius of a cylinder with a volume of 2355?

Description : How do you find the radius of a cylinder with a volume of 2355?

Last Answer : That will depend on its height which has not been given but thevolume of a cylinder is pi*radius squared*height.

How do you find radius of a cylinder if the volume is 2355 and the height is 10?

Description : How do you find radius of a cylinder if the volume is 2355 and the height is 10?

Last Answer : Area of base of cylinder 2355/10 = 235.5 square unitsRadius is the square root of (235.5/pi) = 8.658 units rounded to3 decimal places

What is answer Curved surface area of a cylinder is 176cm square area of base is 38.5cm square fund volume?

Description : What is answer Curved surface area of a cylinder is 176cm square area of base is 38.5cm square fund volume?

Last Answer : What is the answer ?

What is the volume of a cylinder that has a radius of 4 centimeters and a height of 40 centimeters?

Description : What is the volume of a cylinder that has a radius of 4 centimeters and a height of 40 centimeters?

Last Answer : Volume of cylinder: pi*16*40 = 2010.619 cubic cm to threedecimal places

The accumulation of carbon in a cylinder results in increase of A. clearance volume B. volumetric efficiency C. ignition time D. effective compression ratio

Description : The accumulation of carbon in a cylinder results in increase of A. clearance volume B. volumetric efficiency C. ignition time D. effective compression ratio

Last Answer : ANSWER : D

An engine indicator is used to determine the following A. Speed B. Temperature C. M.E.P D. Volume of cylinder

Description : An engine indicator is used to determine the following A. Speed B. Temperature C. M.E.P D. Volume of cylinder

Last Answer : ANSWER : C

In compression ignition (CI) engine, the compression ratio is a. Cylinder volume / Clearance volume b. Swept Volume / Cylinder Volume c. Clearance volume / Cylinder volume d. Cylinder volume / Swept volume (Ans:a)

Description : In compression ignition (CI) engine, the compression ratio is a. Cylinder volume / Clearance volume b. Swept Volume / Cylinder Volume c. Clearance volume / Cylinder volume d. Cylinder volume / Swept volume (Ans:a)

Last Answer : In two stroke engine there is one power stroke in _____ of crankshaft rotation. a. 90° b. 180° c. 270° d. 360° (Ans:d)

If the performance of diesel engine of different sizes, cylinder dimensions and power rating are to be compared, which of the following parameters can be used for such comparison? (a) Swept volume (b) Air fuel ratio (c) Specific brake fuel consumption (d) Volumetric efficiency

Description : If the performance of diesel engine of different sizes, cylinder dimensions and power rating are to be compared, which of the following parameters can be used for such comparison? (a) Swept volume (b) Air fuel ratio (c) Specific brake fuel consumption (d) Volumetric efficiency

Last Answer : Ans :c

The accumulation of carbon in a cylinder results in increase of a. clearance volume b. volumetric efficiency c. ignition time d. effective compression ratio

Description : The accumulation of carbon in a cylinder results in increase of a. clearance volume b. volumetric efficiency c. ignition time d. effective compression ratio

Last Answer : ANSWER d. effective compression ratio

An engine indicator is used to determine the following a. Speed. b. Temperature. c. Volume of cylinder. d. Mean effective pressure and Indicated horse power.

Description : An engine indicator is used to determine the following a. Speed. b. Temperature. c. Volume of cylinder. d. Mean effective pressure and Indicated horse power.

Last Answer : ANSWER d. Mean effective pressure and Indicated horse power.

In a 75 cc engine the parameter cc indicates a. fuel tank capacity b. lubricating oil capacity c. swept volume d. cylinder volume

Description : In a 75 cc engine the parameter cc indicates a. fuel tank capacity b. lubricating oil capacity c. swept volume d. cylinder volume

Last Answer : ANSWER c. swept volume

An engine working on air standard Otto cycle has a cylinder diameter of 10 cm and stroke length of 15 cm. The ratio of specific heats for air is 1.4. If the clearance volume is 196.3 cc and the heat supplied per kg of air per cycle is 1800 kJ/kg, then work output per cycle per kg of air is a. 879.1 kJ/ b. 890.2 kJ c. 895.3 kJ d. 973.5 kJ

Description : An engine working on air standard Otto cycle has a cylinder diameter of 10 cm and stroke length of 15 cm. The ratio of specific heats for air is 1.4. If the clearance volume is 196.3 cc and the heat supplied per kg of air per ... kg of air is a. 879.1 kJ/ b. 890.2 kJ c. 895.3 kJ d. 973.5 kJ

Last Answer : ANSWER d. 973.5 kJ

What is the formula for compression (rk) ratio of the Otto cycle? a. rk = Volume of cylinder at the beginning of compression / Volume of cylinder at the end of compression b. rk = Volume of cylinder at the end of compression / Volume of cylinder at the beginning of compression c. rk = Volume of cylinder at the end of compression / clearance volume d. none of the above

Description : What is the formula for compression (rk) ratio of the Otto cycle? a. rk = Volume of cylinder at the beginning of compression / Volume of cylinder at the end of compression b. rk = Volume of cylinder ... c. rk = Volume of cylinder at the end of compression / clearance volume d. none of the above

Last Answer : ANSWER a. rk = Volume of cylinder at the beginning of compression / Volume of cylinder at the end of compression

Sphericity is the ratio of the surface area of a spherical particle having the same volume as the particle to the surface area of the particle. Which of the following has the maximum value of sphericity? (A) Sphere(B) Cube(C) Cylinder (L/D = 1)(D) Raschig rings

Description : Sphericity is the ratio of the surface area of a spherical particle having the same volume as the particle to the surface area of the particle. Which of the following has the maximum value of sphericity? (A) Sphere (B) Cube (C) Cylinder (L/D = 1) (D) Raschig rings

Last Answer : (A) Sphere

Three solid objects of the same material and of equal mass-a sphere, a cylinder (length = diameter) and a cube are at 500°C initially. These are dropped in a quenching bath containing a large volume of cooling oil each attaining the bath temperature eventually. The time required for 90% change in temperature is the smallest for (A) Cube (B) Cylinder (C) Sphere (D) Equal for all the three

Description : Three solid objects of the same material and of equal mass-a sphere, a cylinder (length = diameter) and a cube are at 500°C initially. These are dropped in a quenching bath containing a large volume of cooling oil ... (A) Cube (B) Cylinder (C) Sphere (D) Equal for all the three

Last Answer : (A) Cube

In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder (C) Velocity profile varies hyperbolically and the shear stress remains constant over the cross-section (D) Average flow occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)

Description : In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a ... occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)

Last Answer : (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder

Capacity of a hydraulic accumulator is defined in terms of maximum (A) Amount of energy stored (B) Flow rate through accumulator(C) Rate of falling of ram(D) Volume available in the cylinder

Description : Capacity of a hydraulic accumulator is defined in terms of maximum (A) Amount of energy stored (B) Flow rate through accumulator (C) Rate of falling of ram (D) Volume available in the cylinder

Last Answer : (A) Amount of energy stored