How do I speed up my slow computer and how much will it cost me?

How do I speed up my slow computer and how much will it cost me?
by

1 Answer

Answer :

There are many ways to clean out your computer with or without a technician. Run a disk cleanup at least once of week to empty files, compress you file for added space and therefore faster speed. If this doesn't work check yellowpages.com for computer tech near you.
by

Related questions

When you're at the end of something good, do you speed up or slow down?

Description : When you're at the end of something good, do you speed up or slow down?

Last Answer : answer:I tend to speed up if I can. Sticking with the Netflix example: the last time I watched a show online, I found out about 75% of the way through that the whole series wasn't actually ... of course), whereas later installations tend to leave things open as a way of driving towards the finale.

If death meant leaving the stage long enough to change & come back as a new character...Would you slow down or speed up?

Description : If death meant leaving the stage long enough to change & come back as a new character...Would you slow down or speed up?

Last Answer : I’d slow down and probably commit many more ‘sins’.

If you were driving down the freeway at nighttime during construction work and spotted several Highway Patrol officers near the construction area with their lights on would you a: speed up b: slow down c: continue at the same speed (assuming that this is a multi-lane freeway and you are able to go at or above typical freeway speeds)

Description : If you were driving down the freeway at nighttime during construction work and spotted several Highway Patrol officers near the construction area with their lights on would you a: speed up b: slow down c: ... this is a multi-lane freeway and you are able to go at or above typical freeway speeds)

Last Answer : I always slow down for construction sites. Those “My Daddy Works Here!” signs got me.

How can I speed up my slow Android?

Description : How can I speed up my slow Android?

Last Answer : Here are the steps - 1.clear web browser cache. 2.clear cache for another apps. 3.try a cache clearing app. 4.Norton clean, junk removal. 5.cache cleaner, phone booster and optimizer.

How does an inhibitor slow down a reaction and a catalyst speed up a reaction?

Description : How does an inhibitor slow down a reaction and a catalyst speed up a reaction?

Last Answer : A catalyst works by providing a reaction route with a loweractivation energy. An inhibitor slows a reaction and can work inseveral ways, for instance by tying up one of the reactants. ... when we say catalyst inhibitor, which issomething which binds to the active sites on a heterogeneouscatalyst.

Do myelin sheaths slow down or speed up nerve impulses?

Description : Do myelin sheaths slow down or speed up nerve impulses?

Last Answer : What is the answer ?

As load is added to a shunt motor, the motor will _________. A. speed up B. continue to operate at the same speed C. slow down slightly D. stop

Description : As load is added to a shunt motor, the motor will _________. A. speed up B. continue to operate at the same speed C. slow down slightly D. stop

Last Answer : Answer: C

Why is Comcast high-speed Internet service so unreliable and slow as opposed to water and electrical services?

Description : Why is Comcast high-speed Internet service so unreliable and slow as opposed to water and electrical services?

Last Answer : answer:Someone correct me if I'm wrong, but my understanding is that your basic cable broadband (Comcast, etc) pile many users onto a single node, while this is not the case with FIOS. I was ... Mbps throughout the day and night. I also hope Google Fiber makes its way to my area soon though.

Internet speed slow: upgrade router or change provider?

Description : Internet speed slow: upgrade router or change provider?

Last Answer : try changing the Internet you use. i have a very fast Internet connection, but i used Internet explorer. wrong choice one of my friends moved me onto opera, and i love it! it runs at least twice as ... shold be using safari. thats all i can help with. try out opera and see if there are any changes

Why does time slow down as one approaches the speed of light?

Description : Why does time slow down as one approaches the speed of light?

Last Answer : One thought experiment that shows that time does in fact slow down is to imagine two inertial frames of reference- call them spaceships if you want- moving relative to each other. Say that each ship has a ... that seems to contradict the twin paradox. Hmm I'll have to think on it a bit more.

Sometimes I move fast,Sometimes I move slow;But my speed is truly constant,And nowhere I go.What am I? -Riddles

Description : Sometimes I move fast,Sometimes I move slow;But my speed is truly constant,And nowhere I go.What am I? -Riddles

Last Answer : Time.

When the heat is very hot, my accelerator pedal and nothing stops responding and the speed and speed slowly slow down

Description : The engine does not shut down. I'll go through and fuck it again. Thank you

Last Answer : Need Answer

Moderator is a material which is used to slow down the neutrons produced during nuclear fission. The neutrons from the source are of high speed and en

Description : Moderator is a material which is used to slow down the neutrons produced during nuclear fission. The neutrons from the source are of high speed and en

Last Answer : Moderator is a material which is used to slow down the neutrons produced during nuclear fission ... neutrons C. magnetic neutrons D. electric neutrons

Moderator is a material which is used to slow down the neutrons produced during nuclear fission. The neutrons from the source are of high speed and en

Description : Moderator is a material which is used to slow down the neutrons produced during nuclear fission. The neutrons from the source are of high speed and en

Last Answer : Moderator is a material which is used to slow down the neutrons produced during nuclear fission. The ... water B. Graphite C. Beryllium D. Sodium

Moderator is a material which is used to slow down the neutrons produced during nuclear fission. The neutrons from the source are of high speed and en

Description : Moderator is a material which is used to slow down the neutrons produced during nuclear fission. The neutrons from the source are of high speed and en

Last Answer : Moderator is a material which is used to slow down the neutrons produced during nuclear fission. The ... mass number only D. be all the above three

Moderator is a material which is used to slow down the neutrons produced during nuclear fission. The neutrons from the source are of high speed and en

Description : Moderator is a material which is used to slow down the neutrons produced during nuclear fission. The neutrons from the source are of high speed and en

Last Answer : Moderator is a material which is used to slow down the neutrons produced during nuclear fission ... . absorbs thermal energy. Produced in the reactors

In multi stage compressor, the isothermal compression is achieved by A. Employing intercooler B. By constantly cooling the cylinder C. By running compressor at very slow speed D. By insulating the cylinder

Description : In multi stage compressor, the isothermal compression is achieved by A. Employing intercooler B. By constantly cooling the cylinder C. By running compressor at very slow speed D. By insulating the cylinder

Last Answer : ANSWER : C

A single-phase induction motor will only start if you spin the rotor rapidly with the line switch closed. After starting, its speed fluctuates between very slow and half-speed. The problem probably lies in the ________. A. starting winding B. centrifugal mechanism C. centrifugal switch D. running winding

Description : A single-phase induction motor will only start if you spin the rotor rapidly with the line switch closed. After starting, its speed fluctuates between very slow and half-speed. The problem ... in the ________. A. starting winding B. centrifugal mechanism C. centrifugal switch D. running winding

Last Answer : Answer: D

A single-phase induction motor fails to start. The rotor is spun rapidly with the line switch closed. Having started by this method it is noted that the motor fluctuates between a very slow speed and half speed. The problem probably lies in the ______ A. starting winding B. centrifugal mechanism C. centrifugal switch D. running winding

Description : A single-phase induction motor fails to start. The rotor is spun rapidly with the line switch closed. Having started by this method it is noted that the motor fluctuates between a very slow ... lies in the ______ A. starting winding B. centrifugal mechanism C. centrifugal switch D. running winding

Last Answer : Answer: D

If a unloaded shunt motor's field were weakened by rheostat resistance or by an open circuit, the motor would _________. A. overspeed due to reduced CEMF B. stop because of low flux C. continue to run at base speed D. slow down and overheat

Description : If a unloaded shunt motor's field were weakened by rheostat resistance or by an open circuit, the motor would _________. A. overspeed due to reduced CEMF B. stop because of low flux C. continue to run at base speed D. slow down and overheat

Last Answer : Answer: A

An across-the-line starter provides ___________________. A. maximum torque B. slow starting power C. high speed D. reduced voltage

Description : An across-the-line starter provides ___________________. A. maximum torque B. slow starting power C. high speed D. reduced voltage

Last Answer : Answer: A

When starting a DC propulsion motor the variable rheostat must FIRST be turned ____________. A. all the way to the run position then quickly back to slow B. to the slow position then gradually moved to full speed C. to the mid position D. quickly to the run position

Description : When starting a DC propulsion motor the variable rheostat must FIRST be turned ____________. A. all the way to the run position then quickly back to slow B. to the slow position then gradually moved to full speed C. to the mid position D. quickly to the run position

Last Answer : Answer: B

Which of the listed precautions should be observed before spraying liquid solvent on the insulation of an electric motor? A. Slow the motor down to low speed. B. Disconnect the motor from the power source. C. Secure all ventilation in the area. D. Preheat the insulation to assist in cleaning.

Description : Which of the listed precautions should be observed before spraying liquid solvent on the insulation of an electric motor? A. Slow the motor down to low speed. B. Disconnect the motor from the power source. C. Secure all ventilation in the area. D. Preheat the insulation to assist in cleaning.

Last Answer : Answer: B

Electric propulsion coupling excitation is reduced at slow speeds to ___________. A. increase speed control B. increase shaft torque C. prevent coupling overheating D. prevent coupling slippage

Description : Electric propulsion coupling excitation is reduced at slow speeds to ___________. A. increase speed control B. increase shaft torque C. prevent coupling overheating D. prevent coupling slippage

Last Answer : Answer: C

Heavy water used in the nuclear reactors to slow down the speed of neutrons is (A) Highly purified water (B) A compound of oxygen and deuterium (C) Water having dissolved salts of heavy metals (D) None of these

Description : Heavy water used in the nuclear reactors to slow down the speed of neutrons is (A) Highly purified water (B) A compound of oxygen and deuterium (C) Water having dissolved salts of heavy metals (D) None of these

Last Answer : (B) A compound of oxygen and deuterium

A propeller agitator (A) Produces mainly axial flow (B) Is used for mixing high viscosity pastes (C) Runs at very slow speed (2 rpm) (D) All (A), (B) and (C)

Description : A propeller agitator (A) Produces mainly axial flow (B) Is used for mixing high viscosity pastes (C) Runs at very slow speed (2 rpm) (D) All (A), (B) and (C)

Last Answer : (A) Produces mainly axial flow

Which of the following agitators having a large blade area, rotating at slow speed is used for mixing high viscosity liquids (> 50000 centipoise)? (A) Propeller(B) Helical screw(C) Flat blade turbine(D) Curved blade turbine

Description : Which of the following agitators having a large blade area, rotating at slow speed is used for mixing high viscosity liquids (> 50000 centipoise)? (A) Propeller (B) Helical screw (C) Flat blade turbine (D) Curved blade turbine

Last Answer : (B) Helical screw

In a springy collision, if the fast moving trolley collides with a slow one, then the fast one will bounce back at speed of A. slow one B. less than slow one C. more than slow one D. with the same speed as before

Description : In a springy collision, if the fast moving trolley collides with a slow one, then the fast one will bounce back at speed of A. slow one B. less than slow one C. more than slow one D. with the same speed as before

Last Answer : slow one

The closer satellite is to Earth, its speed should be A. more fast B. more slow C. zero D. any constant value

Description : The closer satellite is to Earth, its speed should be A. more fast B. more slow C. zero D. any constant value

Last Answer : more fast

A man is standing on a weighing machine in a lift which is moving. The weighing machine will slow MINIMUM reading when, the lift is moving? A. Upward with uniform speed B. Downward with uniform acceleration C. In a free fall due to failure of the lift mechanism (Answer) D. None of these

Description : A man is standing on a weighing machine in a lift which is moving. The weighing machine will slow MINIMUM reading when, the lift is moving? A. Upward with uniform speed B. Downward with uniform acceleration C. In a free fall due to failure of the lift mechanism (Answer) D. None of these

Last Answer : C. In a free fall due to failure of the lift mechanism (Answer)

The closer satellite is to Earth, its speed should be A. more fast B. more slow C. zero D. any constant value

Description : The closer satellite is to Earth, its speed should be A. more fast B. more slow C. zero D. any constant value

Last Answer : more fast

A moderator is used in nuclear reactor in order to ? A. Accelerate the neutrons B. Slow down the speed of the neutrons (Answer) C. Increase the number of elections D. Decrease the number of electrons E. None of these

Description : A moderator is used in nuclear reactor in order to ? A. Accelerate the neutrons B. Slow down the speed of the neutrons (Answer) C. Increase the number of elections D. Decrease the number of electrons E. None of these

Last Answer : B. Slow down the speed of the neutrons (Answer)

The closer satellite is to Earth, its speed should be A. more fast B. more slow C. zero D. any constant value

Description : The closer satellite is to Earth, its speed should be A. more fast B. more slow C. zero D. any constant value

Last Answer : more fast

The most suitable bearing for carrying very heavy loads with slow speed is (a) Hydrodynamic bearing (b) ball bearing [IAS 1994] (c) Roller bearing (d) hydrostatic bearing

Description : The most suitable bearing for carrying very heavy loads with slow speed is (a) Hydrodynamic bearing (b) ball bearing [IAS 1994] (c) Roller bearing (d) hydrostatic bearing

Last Answer : (d) hydrostatic bearing

If majority of students in your class is weak you should Options: A) Not Care About Intelligent student B) Keep Your Speed Of Teaching Fast So That Students Comprehension Level May Increase C) Keep Your Teaching Slow Which Can Also Be Helpful To Bright Students. D) Keep Your Teaching Slow Along With Some Extra Guidance To Bright People

Description : If majority of students in your class is weak you should Options: A) Not Care About Intelligent student B) Keep Your Speed Of Teaching Fast So That Students Comprehension Level May Increase C) ... Helpful To Bright Students. D) Keep Your Teaching Slow Along With Some Extra Guidance To Bright People

Last Answer : D) Keep Your Teaching Slow Along With Some Extra Guidance To Bright People

An alternator coupled to a _____ runs at slow speed, as compared to others.

Last Answer : An alternator coupled to a hydraulic turbine runs at slow speed, as compared to others.