When the heat is very hot, my accelerator pedal and nothing stops responding and the speed and speed slowly slow down

The engine does not shut down. I'll go through and fuck it again. Thank you
by

1 Answer

Answer :

Need Answer
by

Related questions

can you adjust the angle of an auto accelerator pedal?

Description : can you adjust the angle of an auto accelerator pedal?

Last Answer : Need Answer

A pedal boat can cover 20km in 1 hr in still water. And it takes thrice as much as time to cover up than as to cover down the same distance in running water. The speed of the current is. A) 7.5 km/hr B) 20 km/hr C) 5 km/hr D) 10 km/hr

Description : A pedal boat can cover 20km in 1 hr in still water. And it takes thrice as much as time to cover up than as to cover down the same distance in running water. The speed of the current is. A) 7.5 km/hr B) 20 km/hr C) 5 km/hr D) 10 km/hr

Last Answer : ANSWER : D Explanation: Let the speed of upstream be x' km/hr Then speed in downstream = 3x km/hr[thrice as much as time to cover up than as to cover down the same distance in running water] Speed in ...  Speed in downstream = 30 km/hr  Hence speed of the current = (30 -10)/2  = 10 km/hr.

when an individual stops working out, muscles slowly __________. -General Knowledge

Description : when an individual stops working out, muscles slowly __________. -General Knowledge

Last Answer : C. lose strength.

If the field circuits of an unloaded salient pole synchronous motor gets suddenly open circuited, then (A) The motor stops. (B) It continues to run at the same speed. (C) Its runs at the slower speed. (D) It runs at a very high speed.

Description : If the field circuits of an unloaded salient pole synchronous motor gets suddenly open circuited, then (A) The motor stops. (B) It continues to run at the same speed. (C) Its runs at the slower speed. (D) It runs at a very high speed.

Last Answer : Ans: B The motor continues to run at the same speed because synchronous motor speed does not depend upon load, Nα f.

One of the main advantages of disc brakes over drum brakes is that the disc brake : U. Can stop a vehicle in a shorter distance V. Is more heat resistant W. Weighs less than drum brakes X. Requires less pedal force to stop the vehicle

Description : One of the main advantages of disc brakes over drum brakes is that the disc brake : U. Can stop a vehicle in a shorter distance V. Is more heat resistant W. Weighs less than drum brakes X. Requires less pedal force to stop the vehicle

Last Answer : . Requires less pedal force to stop the vehicle

As shown in the illustration, which of the listed actions of the synchroscope pointer is occurring? EL-0002 A. Revolving slowly in the slow direction. B. Revolving rapidly in the slow direction. C. Revolving rapidly in the fast direction. D. It would be stationary at the 12 o'clock position since the leading edges of the A phases are in phase.

Description : As shown in the illustration, which of the listed actions of the synchroscope pointer is occurring? EL-0002 A. Revolving slowly in the slow direction. B. Revolving rapidly in the slow direction. C. ... stationary at the 12 o'clock position since the leading edges of the A phases are in phase.

Last Answer : Answer: C

The preferred route of administration of medication in the most acute care situations is which of the following routes? a) Intravenous The IV route is the preferred parenteral route in most acute care situations because it is much more comfortable for the patient, and peak serum levels and pain relief occur more rapidly and reliably. b) Epidural Epidural administration is used to control postoperative and chronic pain. c) Subcutaneous Subcutaneous administration results in slow absorption of medication. d) Intramuscular Intramuscular administration of medication is absorbed more slowly than intravenously administered medication.

Description : The preferred route of administration of medication in the most acute care situations is which of the following routes? a) Intravenous The IV route is the preferred ... ) Intramuscular Intramuscular administration of medication is absorbed more slowly than intravenously administered medication.

Last Answer : a) Intravenous The IV route is the preferred parenteral route in most acute care situations because it is much more comfortable for the patient, and peak serum levels and pain relief occur more rapidly and reliably.

What happens if you keep your foot pressed all the way down on the gas pedal while the car is on and in park?

Description : What happens if you keep your foot pressed all the way down on the gas pedal while the car is on and in park?

Last Answer : You blow the engine if it doesn’t have a rev delimiter?

What happens when the bicycle rider pushes down on the pedal?

Description : What happens when the bicycle rider pushes down on the pedal?

Last Answer : If the rider pushes down on the forward side, the top run of thechain goes tight, the rear Wheel begins to turn and the bike startsto move forward.

What happens when the bicycle rider pushes down on the pedal?

Description : What happens when the bicycle rider pushes down on the pedal?

Last Answer : If the rider pushes down on the forward side, the top run of thechain goes tight, the rear Wheel begins to turn and the bike startsto move forward.

A pedal boat goes 12km upstream and 14km downstream in 3hrs. It goes 15km upstream and 10.5km downstream in 3 hrs 15mints. The speed of the boat in still water is A) 10 B) 15 C) 20 D) 25

Description : A pedal boat goes 12km upstream and 14km downstream in 3hrs. It goes 15km upstream and 10.5km downstream in 3 hrs 15mints. The speed of the boat in still water is A) 10 B) 15 C) 20 D) 25 

Last Answer : ANSWER: A

If a learner is 'ready’ when he begins a new task and the first teaching is good, his learning curve will probably rise Options: A) Rapidly with wide fluctuations B) Rapidly with slight fluctuations C) At a moderate but very uniform rate of speed D) Slowly but steadily

Description : If a learner is 'ready’ when he begins a new task and the first teaching is good, his learning curve will probably rise Options: A) Rapidly with wide fluctuations B) Rapidly with slight fluctuations C) At a moderate but very uniform rate of speed D) Slowly but steadily

Last Answer : B) Rapidly with slight fluctuations 

Was an accelerator an original component of the internal combustion engine?

Description : Was an accelerator an original component of the internal combustion engine?

Last Answer : No and it still isn’t. Look up the definition.

Would exercise in a gravity force accelerator be fun?

Description : Would exercise in a gravity force accelerator be fun?

Last Answer : Why not, sounds likes loads of fun, I bet imbibing in a little happy herb would make it really zen. lol Aaaah…float grasshopper, float.

Can we make non-superheavy elements in a particle accelerator?

Description : Can we make non-superheavy elements in a particle accelerator?

Last Answer : answer:Right? I don't know if it's quite practical with the design of the current equipment as it is made to take singular fundamental particles within atoms, smash them together, and see what the littler ... in the heart of a star or via supernova-soooo, you're pretty much made of star-metal.

What happens when you put a compound into a particle accelerator?

Description : What happens when you put a compound into a particle accelerator?

Last Answer : The molecules would need to be ionized in order to be accelerated. A proton, positron or electron hitting a molecule in even a small and weak particle accelerator would blow it into individual ionized atoms and/or smaller ionized molecules.

What is the purpose of a particle accelerator?

Description : What is the purpose of a particle accelerator?

Last Answer : The main purpose of a particle accelerator is to generate synchrotron radiation or to smash atomic nuclei together or into a target to see what is produced from the energy of the ... inform which theoretical physical models are incorrect and occasionally which models have a valid experimental basis.

What is the purpose of accelerator governer?

Description : What is the purpose of accelerator governer?

Last Answer : The purpose of accelerator governer is to cut of steam momentarily when large electrical loads are taken to prevent turbine speeding up. 

Interaction of Multiplier and accelerator is known as (a) Investment Multiplier (b) Employment Multiplier (c) Super Multiplier (d) Dynamic Multiplier

Description : Interaction of Multiplier and accelerator is known as (a) Investment Multiplier (b) Employment Multiplier (c) Super Multiplier (d) Dynamic Multiplier

Last Answer : (c) Super Multiplier

Pick up the correct statement from the following: (A) Calcium chloride acts as a retarder (B) Calcium chloride acts as an accelerator (C) Gypsum (calcium sulphate) acts as a retarder (D) Both (b) and (c)

Description : Pick up the correct statement from the following: (A) Calcium chloride acts as a retarder (B) Calcium chloride acts as an accelerator (C) Gypsum (calcium sulphate) acts as a retarder (D) Both (b) and (c)

Last Answer : (D) Both (b) and (c)

The maximum quantity of calcium chloride used as an accelerator in cement in percentage by weight of cement is (A) 1 (B) 2 (C) 3 (D) 4

Description : The maximum quantity of calcium chloride used as an accelerator in cement in percentage by weight of cement is (A) 1 (B) 2 (C) 3 (D) 4

Last Answer : Answer: Option B

If an increase in investment leads to a bigger increase in national income (a) Accelerator (b) Aggregate demand © Monetarism (d) Multiplier

Description : If an increase in investment leads to a bigger increase in national income (a) Accelerator (b) Aggregate demand © Monetarism (d) Multiplier

Last Answer : (d) Multiplier

A color television set employs a 25,000 volt electron accelerator to produce the picture and potentially harmful radiation which must be shielded against. The main component of this radiation consists of w) electrons which penetrate the picture tube x) soft x-rays y) microwaves z) ultraviolet radiation

Description : A color television set employs a 25,000 volt electron accelerator to produce the picture and potentially harmful radiation which must be shielded against. The main component of this radiation consists ... which penetrate the picture tube x) soft x-rays y) microwaves z) ultraviolet radiation 

Last Answer : ANSWER: X -- SOFT X-RAYS

Brad stared through the dirty soot-smeared window on the 22nd floor of the office tower. Overcome with depression he slid the window open and jumped through it. It was a sheer drop outside the building to the ground. Miraculously after he landed he was completely unhurt. Since there was nothing to cushion his fall or slow his descent, how could he have survived the fall? -Riddles

Description : Brad stared through the dirty soot-smeared window on the 22nd floor of the office tower. Overcome with depression he slid the window open and jumped through it. It was a sheer drop outside the building ... nothing to cushion his fall or slow his descent, how could he have survived the fall? -Riddles

Last Answer : Brad was so sick and tired of window washing, he opened the window and jumped inside.

You also have a slow net? I'm downloading the movie for the fourth time and nothing!

Description : all day I download from ten to five and the pages load a long time..speed is speeding :( do you have it too ?? thanks for your answers .. I'm not even surprised ellcupacabre that from such a distance, if he has good net and here it goes bad that he has a job with it ..

Last Answer : Well, it can be a connection ..... but not either .... so please download this >>> http://sourceforge.net/projects/hjt/ you need to go to the desktop and run >>> down in on the left will be the inscription> SCAN >>>>>> .. >> Save log

In multi stage compressor, the isothermal compression is achieved by A. Employing intercooler B. By constantly cooling the cylinder C. By running compressor at very slow speed D. By insulating the cylinder

Description : In multi stage compressor, the isothermal compression is achieved by A. Employing intercooler B. By constantly cooling the cylinder C. By running compressor at very slow speed D. By insulating the cylinder

Last Answer : ANSWER : C

A single-phase induction motor will only start if you spin the rotor rapidly with the line switch closed. After starting, its speed fluctuates between very slow and half-speed. The problem probably lies in the ________. A. starting winding B. centrifugal mechanism C. centrifugal switch D. running winding

Description : A single-phase induction motor will only start if you spin the rotor rapidly with the line switch closed. After starting, its speed fluctuates between very slow and half-speed. The problem ... in the ________. A. starting winding B. centrifugal mechanism C. centrifugal switch D. running winding

Last Answer : Answer: D

A single-phase induction motor fails to start. The rotor is spun rapidly with the line switch closed. Having started by this method it is noted that the motor fluctuates between a very slow speed and half speed. The problem probably lies in the ______ A. starting winding B. centrifugal mechanism C. centrifugal switch D. running winding

Description : A single-phase induction motor fails to start. The rotor is spun rapidly with the line switch closed. Having started by this method it is noted that the motor fluctuates between a very slow ... lies in the ______ A. starting winding B. centrifugal mechanism C. centrifugal switch D. running winding

Last Answer : Answer: D

A propeller agitator (A) Produces mainly axial flow (B) Is used for mixing high viscosity pastes (C) Runs at very slow speed (2 rpm) (D) All (A), (B) and (C)

Description : A propeller agitator (A) Produces mainly axial flow (B) Is used for mixing high viscosity pastes (C) Runs at very slow speed (2 rpm) (D) All (A), (B) and (C)

Last Answer : (A) Produces mainly axial flow

The most suitable bearing for carrying very heavy loads with slow speed is (a) Hydrodynamic bearing (b) ball bearing [IAS 1994] (c) Roller bearing (d) hydrostatic bearing

Description : The most suitable bearing for carrying very heavy loads with slow speed is (a) Hydrodynamic bearing (b) ball bearing [IAS 1994] (c) Roller bearing (d) hydrostatic bearing

Last Answer : (d) hydrostatic bearing

When you're at the end of something good, do you speed up or slow down?

Description : When you're at the end of something good, do you speed up or slow down?

Last Answer : answer:I tend to speed up if I can. Sticking with the Netflix example: the last time I watched a show online, I found out about 75% of the way through that the whole series wasn't actually ... of course), whereas later installations tend to leave things open as a way of driving towards the finale.

Why does time slow down as one approaches the speed of light?

Description : Why does time slow down as one approaches the speed of light?

Last Answer : One thought experiment that shows that time does in fact slow down is to imagine two inertial frames of reference- call them spaceships if you want- moving relative to each other. Say that each ship has a ... that seems to contradict the twin paradox. Hmm I'll have to think on it a bit more.

If death meant leaving the stage long enough to change & come back as a new character...Would you slow down or speed up?

Description : If death meant leaving the stage long enough to change & come back as a new character...Would you slow down or speed up?

Last Answer : I’d slow down and probably commit many more ‘sins’.

If you were driving down the freeway at nighttime during construction work and spotted several Highway Patrol officers near the construction area with their lights on would you a: speed up b: slow down c: continue at the same speed (assuming that this is a multi-lane freeway and you are able to go at or above typical freeway speeds)

Description : If you were driving down the freeway at nighttime during construction work and spotted several Highway Patrol officers near the construction area with their lights on would you a: speed up b: slow down c: ... this is a multi-lane freeway and you are able to go at or above typical freeway speeds)

Last Answer : I always slow down for construction sites. Those “My Daddy Works Here!” signs got me.

Moderator is a material which is used to slow down the neutrons produced during nuclear fission. The neutrons from the source are of high speed and en

Description : Moderator is a material which is used to slow down the neutrons produced during nuclear fission. The neutrons from the source are of high speed and en

Last Answer : Moderator is a material which is used to slow down the neutrons produced during nuclear fission ... neutrons C. magnetic neutrons D. electric neutrons

Moderator is a material which is used to slow down the neutrons produced during nuclear fission. The neutrons from the source are of high speed and en

Description : Moderator is a material which is used to slow down the neutrons produced during nuclear fission. The neutrons from the source are of high speed and en

Last Answer : Moderator is a material which is used to slow down the neutrons produced during nuclear fission. The ... water B. Graphite C. Beryllium D. Sodium

Moderator is a material which is used to slow down the neutrons produced during nuclear fission. The neutrons from the source are of high speed and en

Description : Moderator is a material which is used to slow down the neutrons produced during nuclear fission. The neutrons from the source are of high speed and en

Last Answer : Moderator is a material which is used to slow down the neutrons produced during nuclear fission. The ... mass number only D. be all the above three

Moderator is a material which is used to slow down the neutrons produced during nuclear fission. The neutrons from the source are of high speed and en

Description : Moderator is a material which is used to slow down the neutrons produced during nuclear fission. The neutrons from the source are of high speed and en

Last Answer : Moderator is a material which is used to slow down the neutrons produced during nuclear fission ... . absorbs thermal energy. Produced in the reactors

How does an inhibitor slow down a reaction and a catalyst speed up a reaction?

Description : How does an inhibitor slow down a reaction and a catalyst speed up a reaction?

Last Answer : A catalyst works by providing a reaction route with a loweractivation energy. An inhibitor slows a reaction and can work inseveral ways, for instance by tying up one of the reactants. ... when we say catalyst inhibitor, which issomething which binds to the active sites on a heterogeneouscatalyst.

Do myelin sheaths slow down or speed up nerve impulses?

Description : Do myelin sheaths slow down or speed up nerve impulses?

Last Answer : What is the answer ?

If a unloaded shunt motor's field were weakened by rheostat resistance or by an open circuit, the motor would _________. A. overspeed due to reduced CEMF B. stop because of low flux C. continue to run at base speed D. slow down and overheat

Description : If a unloaded shunt motor's field were weakened by rheostat resistance or by an open circuit, the motor would _________. A. overspeed due to reduced CEMF B. stop because of low flux C. continue to run at base speed D. slow down and overheat

Last Answer : Answer: A

As load is added to a shunt motor, the motor will _________. A. speed up B. continue to operate at the same speed C. slow down slightly D. stop

Description : As load is added to a shunt motor, the motor will _________. A. speed up B. continue to operate at the same speed C. slow down slightly D. stop

Last Answer : Answer: C

Which of the listed precautions should be observed before spraying liquid solvent on the insulation of an electric motor? A. Slow the motor down to low speed. B. Disconnect the motor from the power source. C. Secure all ventilation in the area. D. Preheat the insulation to assist in cleaning.

Description : Which of the listed precautions should be observed before spraying liquid solvent on the insulation of an electric motor? A. Slow the motor down to low speed. B. Disconnect the motor from the power source. C. Secure all ventilation in the area. D. Preheat the insulation to assist in cleaning.

Last Answer : Answer: B

Heavy water used in the nuclear reactors to slow down the speed of neutrons is (A) Highly purified water (B) A compound of oxygen and deuterium (C) Water having dissolved salts of heavy metals (D) None of these

Description : Heavy water used in the nuclear reactors to slow down the speed of neutrons is (A) Highly purified water (B) A compound of oxygen and deuterium (C) Water having dissolved salts of heavy metals (D) None of these

Last Answer : (B) A compound of oxygen and deuterium

A moderator is used in nuclear reactor in order to ? A. Accelerate the neutrons B. Slow down the speed of the neutrons (Answer) C. Increase the number of elections D. Decrease the number of electrons E. None of these

Description : A moderator is used in nuclear reactor in order to ? A. Accelerate the neutrons B. Slow down the speed of the neutrons (Answer) C. Increase the number of elections D. Decrease the number of electrons E. None of these

Last Answer : B. Slow down the speed of the neutrons (Answer)

A glass chimney stops an oil lamp from smoking because: A. It increases the supply of oxygen to the flame by convection B. The heat produced ensures complete C. Both to these (Answer) D. Neither of these

Description : A glass chimney stops an oil lamp from smoking because: A. It increases the supply of oxygen to the flame by convection B. The heat produced ensures complete C. Both to these (Answer) D. Neither of these

Last Answer : C. Both to these (Answer)

Filtration should be stopped in a filter press, if the (A) Cake becomes very dense (B) Liquor stops flowing out to the discharge (C) Filtration pressure rises suddenly (D) Both (B) & (C

Description : Filtration should be stopped in a filter press, if the (A) Cake becomes very dense (B) Liquor stops flowing out to the discharge (C) Filtration pressure rises suddenly (D) Both (B) & (C

Last Answer : (D) Both (B) & (C

If the growing plant is decapitated, then (a) its growth stops (b) leaves become yellow and fall down (c) axillary buds are inactivated (d) axillary buds are activated.

Description : If the growing plant is decapitated, then (a) its growth stops (b) leaves become yellow and fall down (c) axillary buds are inactivated (d) axillary buds are activated.

Last Answer : (d) axillary buds are activated.

If the engine of a motor car moving up with an angle of 45 slope with a speed of 63kmh stops working suddenly how car move before coming to rest if it weighs 19600 and frictional force is 2000?

Description : If the engine of a motor car moving up with an angle of 45 slope with a speed of 63kmh stops working suddenly how car move before coming to rest if it weighs 19600 and frictional force is 2000?

Last Answer : Need answer